Motorola C116 experiment
Henk
henk.vergonet at gmail.com
Sat Feb 26 19:07:24 CET 2011
Thanks you all for the responses. I have disabled the printf's and
using -m C123 did the trick.
Did some tests hello_world, layer1, loader, And made a backup of the 2MB flash.
Strings in flashrom:
0x00800 BOOT.90.04
0x02000 MOTOROLA_E88
0x02020 1.0.17.E
Here are some of the logs:
OSMOCOM Layer 1 (revision osmocon_v0.0.0-780-gb7a4d8d-modified)
======================================================================
Device ID code: 0xb4fb
Device Version code: 0x0000
ARM ID code: 0xfff3
cDSP ID code: 0x0128
Die ID code: 168f2c10cb001251
======================================================================
REG_DPLL=0x2413
CNTL_ARM_CLK=0xf0a1
CNTL_CLK=0xff91
CNTL_RST=0xfff3
CNTL_ARM_DIV=0xfff9
======================================================================
Assert DSP into Reset
Releasing DSP from Reset
Setting some dsp_api.ndb values
Setting API NDB parameters
DSP Download Status: 0x0001
DSP API Version: 0x0000 0x0000
Finishing download phase
OSMOCOM Compal DSP Dumper (revision osmocon_v0.0.0-780-gb7a4d8d-modified)
======================================================================
DSP bootloader version 0x0100
DSP dump: Registers [00000-0005f]
00000 : 0386 0008 0008 0008 0000 0000 181f 2900 0000 0000 0000 0060
0000 0000 0000 28a1
More information about the baseband-devel
mailing list