Osmocon not loading

[Thatsit]

By the way.. If I use a tool chain built according to the mentioned wiki page, the resulting firmware does not work! It is impossible to initialize the flash.. 
Some weeks ago, I started debugging this. I found out that, as much I can remember, the CFI layer gives a bad protocol id (or version). I expected that it could be related to some padding or alignment differences...

If I use binutils-2.17, gcc-4.1.1-c-c++, newlib-1.14.0, everything works fine

Matthias

Am 07.01.2011 um 16:34 schrieb Bogdan Alecu:

> I used the steps from here http://bb.osmocom.org/trac/wiki/GnuArmToolchain to build the toolchain. I also tried with and without xor, no results.
> 
>