DSP dump from C116

[Henk]

Hi all,

I am trying to get a dump of the DSP code, but after 2 lines of hex
the device seems to get stuck.

Some watchdog or so, missing something in the initialization sequence?
According to the docs the cDSP ID seems to indicate a version B dsp...

Any ideas what I can do to investigate?

- Henk

./osmocon -p /dev/ttyS0 -m c123
../../target/firmware/board/compal_e88/compal_dsp_dump.compalram.bin

Output: (I had commented the register locations to see if it helped...)

OSMOCOM Compal DSP Dumper (revision osmocon_v0.0.0-780-gb7a4d8d-modified)
======================================================================
Device ID code: 0xb4fb                    ==> CalypsoLite
Device Version code: 0x0000
ARM ID code: 0xfff3
cDSP ID code: 0x0128                     ==> Version B
Die ID code: 168f2c10cb001251
======================================================================
Assert DSP into Reset
Releasing DSP from Reset
DSP bootloader version 0x0100
DSP dump: DROM [09000-0dfff]
09000 : 0006 0052 ff7d 009a ffc8 fd21 00b7 ffbf fef7 0009 ff2e fe97
0071 02ce 0719 03f2
09010 : 04be 0625 0359 0535 08e4 033b 0620 078d 02cd 07c5 089e 0346
0494 071f 02d1 03e8