osmocon compal_e88/loader.compalram.bin

[Gianni Tedesco]

On Mon, 2011-05-23 at 13:43 +0200, Uli Kleemann wrote:
> Hi fellows,
> 
> I am new at osmocon and I would like to ask fpr some help about
> flashing the firmware on my C118.
> 
> I build the software as described on Ubuntu11.0.4 using gnuarm-3.4.3.
> I use the  Motorola T191 serial-cable on an Prolific Technology, Inc.
> PL2303 Serial Port USB-Serial adapter. (module USB-serial is loaded)
> 
> when I startosmocon like this:
> ./osmocon -p /dev/ttyUSB0 -m c123xor
> ../../target/firmware/board/compal_e88/loader.compalram.bin
> 
> all I get is that:
> 
> got 2 bytes from modem, data looks like: fe 00  ..
> got 1 bytes from modem, data looks like: 00  .
> got 1 bytes from modem, data looks like: 00  .
> got 1 bytes from modem, data looks like: 00  .
> got 1 bytes from modem, data looks like: 00  .
> got 1 bytes from modem, data looks like: 00  .
> got 1 bytes from modem, data looks like: 00  .

Just looks like noise from plugging the cable in to the phone.

> Can anybody give me an advice how to fix that?

Did you press the power button on the phone? Just a quick tap is
required, not a long press like you would normally do to turn it on.

Gianni