OSMOCOM RECEIVING BUT NOT SENDING DATA THROUGHT TXD - HARDWARE&SOFTWARE TESTED - GNUARM&OSMOCOM BUILT FROM OSMOCOM PAGE INSTRUCTIONS
Filipe RC -
filipe.rc at hotmail.com
Fri Jul 27 02:43:08 CEST 2012
Hi, im having some problems in software only, that i describe bellow in my log:
-FTDI based interface sold by tronix (vendor link on your site), usb2 to serial adaptor ( model TRX1227, CHIPSET FT232R )
-gnuarm&osmocom compiled from source on debian stable as per osmocom without a single problem.
-ran osmocom from su (tried user as well), as instructed and as follows:
$ ./osmocon -p /dev/ttyUSB0 -m c123xor ../../target/firmware/board/compal_e88/loader.compalram.bin
output:
whenever power button was pressed, all i got was some aparently random hex…(no expert on phone flashing here) with no getting to PROMPT1:
"root at box:/home/box/osmocomm/osmocom-bb/src/host/osmocon# sudo ./osmocon -p /dev/ttyUSB0 -m c123 ../../target/firmware/board/compal_e88/loader.compalram.bin
got 1 bytes from modem, data looks like: 00 .
got 2 bytes from modem, data looks like: 00 00 ..
got 3 bytes from modem, data looks like: 72 82 bf r..
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: a6 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: d2 .
got 1 bytes from modem, data looks like: 51 Q
got 1 bytes from modem, data looks like: b2 .
got 1 bytes from modem, data looks like: a4 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 4d M
got 1 bytes from modem, data looks like: a3 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
2nd press:
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
third press:
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
fourth press:
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 82 .
got 1 bytes from modem, data looks like: bf .
got 1 bytes from modem, data looks like: 7d }
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: a6 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 00 .
"
Same output, (maybe with a few more presses) in hex, using gtkterm at 115200baud,8bit,nopar,1stop:
"
00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 B2 A4 12 00 4D A3 A3 68 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 A4 A4 12 00 4D A3 A3 68 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 B2 A4 12 00 4D A3 A3 64 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 A4 A4 12 00 4D A3 A3 64 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 B2 A4 12 00 4D A3 A3 48 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 B2 A4 12 00 4D A3 A3 64 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 B4 A4 12 00 4D A3 A3 48 23 00 00 00 F1 00 72 82 BF 7D FD 7F 00 A6 51 D2 51 A4 A4 12 00 4D A3 A3 48 23 00 00
"
-/dev/USB0 permission check - good, even chmoded 777&chown on rc.local.
-cable check: thought txd was broken, but wasnt. checked from linux
with a led stuck to the txd end of the jack, echo "whatever" > /dev/ttyUSB0, led did flash.
-chances i put are:
osmocom dependent on some specific C123 firmware?
some kind of hidden compilation complication?
some kind of ftdi eeprom config/bitrate/parity config missing for osmocom?
I hope i have managed to be concise enough.
Great work guys.
Greatings from portugal,
Filipe RC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20120727/9a5371c9/attachment-0001.html>
More information about the baseband-devel
mailing list