chainload.compalram.bin missing?

[Craig Comstock]

I tried but seem to be getting an error...

pi at raspberrypi ~/osmocom-bb/src/host/osmocon $ ./osmocon -d tr -p /dev/ttyUSB0 -m c140 -c ../../target/firmware/board/compal_e86/hello_world.highram.bin
got 1 bytes from modem, data looks like: 00  .
got 6 bytes from modem, data looks like: 66 74 6d 74 6f 6f  ftmtoo
got 1 bytes from modem, data looks like: 6c  l
Received FTMTOOL from phone, ramloader has aborted
got 1 bytes from modem, data looks like: 65  e
got 1 bytes from modem, data looks like: 72  r
got 1 bytes from modem, data looks like: 72  r
got 1 bytes from modem, data looks like: 6f  o
got 1 bytes from modem, data looks like: 72  r

I tried a different computer that is definitely faster and that didn't solve it. I am using a different serial cable, this one a home wired cp2102 where before I think I got this working with a direct wire to the raspberry pi alt serial pins.

Are there any links to describe what is going on at the beginning when you press the power button?

I found these links as well...

http://lists.osmocom.org/pipermail/baseband-devel/2011-February/001407.html (didn't try this, but can)

http://lists.osmocom.org/pipermail/baseband-devel/2011-January/001053.html (tried this... same result)

Thanks,
Craig






________________________________
 From: Steve Markgraf <steve at steve-m.de>
To: Craig Comstock <craig_comstock at yahoo.com> 
Cc: "baseband-devel at lists.osmocom.org" <baseband-devel at lists.osmocom.org> 
Sent: Friday, July 19, 2013 4:09 PM
Subject: Re: chainload.compalram.bin missing?
 

Hi,

On 19.07.2013 17:39, Craig Comstock wrote:
> I was trying to load some apps to a Motorola C139 and found that after
> building osmocom-bb that there were no chainload image files built. Am I
> using the wrong branch somehow? Are the instructions out of date on this
> page:
>
> http://bb.osmocom.org/trac/wiki/MotorolaC140

Yes, the instructions are out of date. Meanwhile the chainloader has
been integrated into osmocon, you just need to run:

> ./osmocon -p /dev/ttyUSB0 -m c140 -c ../../target/firmware/board/compal_e86/layer1.highram.bin

Regards,
Steve
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/baseband-devel/attachments/20130820/37e94a9a/attachment.html>