trouble loading trx-firmware

[Pedro Pires]

Hello Eric

if you pass the msg correct you have a space between ../ ../ , this
dont have any space.
you need to check the correct path. Use the command pwd





On Thu, Feb 28, 2013 at 12:01 PM, Erich Dachleger <edachleger at yahoo.com> wrote:
> Hi list,
> I am trying, with no success so far ,to chain-load the trx-firmware on my
> c118 with usb-serial-cable.:
>
> ------output-----
>  ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../
> ../target/firmware/board/compal_e88/trx.compalram.bin ../
> ../target/firmware/board/compal_e88/chainload.highram.bin
> got 2 bytes from modem, data looks like: 04 81  ..
> got 5 bytes from modem, data looks like: 1b f6 02 00 41  ....A
> got 1 bytes from modem, data looks like: 01  .
> got 1 bytes from modem, data looks like: 40  @
> Received PROMPT1 from phone, responding with CMD
> opening file: No such file or directory
> ------------------------------------
>
> I also tried switching highram-compalram:
> ./osmocon -p /dev/ttyUSB0 -m c123xor -c ../
> ../target/firmware/board/compal_e88/trx.highram.bin ../
> ../target/firmware/board/compal_e88/chainload.compalram.bin
>
> And also
> ./osmocon -p /dev/ttyUSB0 -m c123xor -c
> target/firmware/board/compal_e88/trx.compalram.bin
> target/firmware/board/compal_e88/chainload.highram.bin
>
> but got same errors. I used the script in the wiki for building the
> toolchain prior to building the code.
> ----------------------------------
>
> Any ideas what might be wrong?
>
> Regards erich
>
>