FreeCalypso > hg > fc-magnetite

annotate doc/Config-vars @ 660:293c7db5f10f

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
bmi3: fixed the mysterious "mute on first call" bug When UI-enabled fw boots on a previously blank (no /mmi/* files) FFS for the first time, the output_volume member of the persistent UI settings structure was left uninitialized, corresponding to the earpiece volume being set to mute, which is an invalid setting. Because of other quirks in the far-from-finished UI code, this volume setting takes effect only when the first call is answered, producing the odd behaviour seen at the user level. The current fix is to set the blank-FFS default for output_volume to volume level 4, which is the same -6 dB Iota volume as the ACI default.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 14 May 2020 02:50:41 +0000
parents 29c0be5a1962
children b7b809c62586
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
523
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
1 The following Bourne shell variables can be set on the ./configure.sh command
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
2 line to tweak the firmware build configuration:
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
3
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
4 ALLOW_CSIM_GSM
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6 Per TI's original design, the AT+CSIM command does not allow GSM APDUs
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7 of class 0xA0. Openmoko found some need for them, and they patched
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8 their modem fw to allow these APDUs with AT+CSIM. With our new hybrid
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9 modem fw this policy setting is configurable at build time; the default
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 is ALLOW_CSIM_GSM=1 (GSM APDUs allowed).
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
11
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
12 DISABLE_SLEEP
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
13
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
14 The general default is DISABLE_SLEEP=0, and the firmware automatically
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
15 enables all of the chipset's available sleep modes on boot. Setting
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
16 DISABLE_SLEEP=1 causes all sleep modes to be disabled by default on
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
17 boot (they can still be enabled with the AT%SLEEP command); this
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
18 setting is needed for FCDEV3B V1 boards that have a hardware bug that
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
19 causes breakage when sleep modes are enabled.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
20
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
21 DSAMPLE_FULL_COLOR
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
22
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
23 When the firmware's R2D component (normally present only in UI-enabled
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
24 builds) is built for any target other than c139, one of TI's D-Sample
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
25 framebuffer drivers is enabled: either color or B&W. (The actual
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
26 hardware pokes are omitted when the build target is anything other than
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
27 dsample, but the framebuffer is still maintained in RAM.) By default
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
28 the color framebuffer driver is enabled; setting DSAMPLE_FULL_COLOR=0
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
29 switches to the B&W framebuffer driver.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
30
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
31 L1_DYN_DSP_DWNLD
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
32
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
33 This setting enables TI's dynamic DSP patch download mechanism. When
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
34 the firmware is built for a Calypso target with DSP ROM version 36 in
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
35 the silicon (all FreeCalypso-made hw and most of the supported legacy
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
36 targets), L1_DYN_DSP_DWNLD is enabled by default and needs to be kept
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
37 enabled for correct operation: the patch code we got from TI for this
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
38 ROM is the dynamic download version, and the ARM-side L1 code expects
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
39 all of these patches to be present, both the static part and the
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
40 dynamic parts. However, one can build our fw with L1_DYN_DSP_DWNLD=0
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
41 for experimental testing, to see what breaks when the dynamic patches
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
42 are omitted.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
43
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
44 L1_VOICE_MEMO_AMR
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
45
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
46 This setting enables or disables support in L1 and in the RiViera Audio
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
47 Service for AMR voice memo recording and playback. This code has not
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
48 been properly studied yet and no test AT commands are provided for it,
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
49 but it is enabled by default like in TI's original TCS211 fw.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
50
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
51 MELODY_E2
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
52
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
53 This setting enables or disables support in L1 and in the RiViera Audio
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
54 Service for playing E2-format melodies. The default is MELODY_E2=1
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
55 like in TI's original TCS211 fw. Note that Melody E1 support is always
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
56 enabled; setting MELODY_E2=0 disables only Melody E2, but not E1.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
57
541
5019764a0e9f doc/Config-vars: RVTMUX_ON_MODEM documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 523
diff changeset
58 RVTMUX_ON_MODEM
5019764a0e9f doc/Config-vars: RVTMUX_ON_MODEM documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 523
diff changeset
59
5019764a0e9f doc/Config-vars: RVTMUX_ON_MODEM documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 523
diff changeset
60 This setting configures the usage of Calypso UARTs. RVTMUX_ON_MODEM=0
5019764a0e9f doc/Config-vars: RVTMUX_ON_MODEM documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 523
diff changeset
61 puts the AT command interface on the MODEM UART and RVTMUX on the IrDA
5019764a0e9f doc/Config-vars: RVTMUX_ON_MODEM documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 523
diff changeset
62 UART (TI's intended config and the default on sensible hw targets);
5019764a0e9f doc/Config-vars: RVTMUX_ON_MODEM documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 523
diff changeset
63 RVTMUX_ON_MODEM=1 (default on the crippled C1xx targets) puts RVTMUX on
5019764a0e9f doc/Config-vars: RVTMUX_ON_MODEM documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 523
diff changeset
64 the MODEM UART, sacrificing the standard AT command interface.
5019764a0e9f doc/Config-vars: RVTMUX_ON_MODEM documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 523
diff changeset
65
523
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
66 SERIAL_DYNAMIC_SWITCH
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
67
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
68 TI's TCS211 fw includes a provision (only for Bluetooth-enabled fw in
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
69 TI's original) to switch one UART between the AT command interface and
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
70 RVTMUX while the other UART is fixed for Bluetooth. In FreeCalypso we
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
71 have changed this code to work without Bluetooth, for the purpose of
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
72 switching the user-facing MODEM UART between AT commands and RVTMUX,
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
73 but the mechanism does not work properly yet and is disabled by default.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
74 Enable it with SERIAL_DYNAMIC_SWITCH=1 if you would like to play with
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
75 it.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
76
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
77 SPEECH_RECO
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
78
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
79 This setting enables or disables support in L1 and in the RiViera Audio
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
80 Service for TI's speech recognition mechanism. This code and the
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
81 underlying DSP facility itself have not been properly studied yet and
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
82 no test AT commands are provided for it, but it is enabled by default
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
83 like in TI's original TCS211 fw.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
84
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
85 SUFFIX
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
86
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
87 This setting is solely for configuration management. If you make a
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
88 build with any of the settings described in this document changed from
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
89 the default, you should also pass a SUFFIX=-xxx argument so your special
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
90 build will be appropriately identified in the build directory name and
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
91 in the firmware version ID string compiled into the image. The naming
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
92 of suffixes is up to you, but here are some examples:
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
93
569
29c0be5a1962 doc update for the arrival of correctly working FCDEV3B V2 hardware
Mychaela Falconia <falcon@freecalypso.org>
parents: 550
diff changeset
94 DISABLE_SLEEP=1 SUFFIX=-nosleep
523
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
95 DSAMPLE_FULL_COLOR=0 UI_CONFIG=bigbw SUFFIX=-bw
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
96 L1_DYN_DSP_DWNLD=0 SUFFIX=-nodyn
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
97 MELODY_E2=0 SUFFIX=-noe2
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
98 SERIAL_DYNAMIC_SWITCH=1 SUFFIX=-sds
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
99 SPEECH_RECO=0 SUFFIX=-nosr
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
100 TR_BAUD_CONFIG=TR_BAUD_812500 SUFFIX=-812500
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
101 USE_STR2IND=1 SUFFIX=-s2i
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
102
550
a1da09e02973 doc/Config-vars: TRACEMASK_IN_FFS addition documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 541
diff changeset
103 TRACEMASK_IN_FFS
a1da09e02973 doc/Config-vars: TRACEMASK_IN_FFS addition documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 541
diff changeset
104
a1da09e02973 doc/Config-vars: TRACEMASK_IN_FFS addition documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 541
diff changeset
105 TI's Test Interface (TIF) component in the GPF realm includes an
a1da09e02973 doc/Config-vars: TRACEMASK_IN_FFS addition documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 541
diff changeset
106 optional feature for saving trace masks in FFS, but TI's production
a1da09e02973 doc/Config-vars: TRACEMASK_IN_FFS addition documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 541
diff changeset
107 firmwares had it disabled. We have now switched to recompiling the
a1da09e02973 doc/Config-vars: TRACEMASK_IN_FFS addition documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 541
diff changeset
108 component in question from source, but we still keep this
a1da09e02973 doc/Config-vars: TRACEMASK_IN_FFS addition documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 541
diff changeset
109 TRACEMASK_IN_FFS code disabled by default, at least for now.
a1da09e02973 doc/Config-vars: TRACEMASK_IN_FFS addition documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 541
diff changeset
110 Set TRACEMASK_IN_FFS=1 to enable this code in GPF.
a1da09e02973 doc/Config-vars: TRACEMASK_IN_FFS addition documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 541
diff changeset
111
523
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
112 TR_BAUD_CONFIG
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
113
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
114 The value of this symbol is an alphanumeric keyword of the form
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
115 TR_BAUD_xxxxxx; the default is TR_BAUD_115200. See
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
116 src/cs/drivers/drv_core/uart/traceswitch.h for the available baud rate
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
117 choices; the most practical use is setting TR_BAUD_CONFIG=TR_BAUD_812500
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
118 when you need to run the RVTMUX serial channel at the maximum possible
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
119 baud rate.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
120
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
121 UI_CONFIG
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
122
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
123 The 3 allowed values for this setting are bigcolor, bigbw and 84x48,
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
124 selecting one of the 3 UI configurations supported by TI's code. The
541
5019764a0e9f doc/Config-vars: RVTMUX_ON_MODEM documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 523
diff changeset
125 default is 84x48 when the firmware is built for target c11x or c139 or
5019764a0e9f doc/Config-vars: RVTMUX_ON_MODEM documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 523
diff changeset
126 c155, and bigcolor otherwise.
523
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
127
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
128 USE_STR2IND
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
129
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
130 Unlike TI's original firmwares, we build without str2ind by default.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
131 You can enable str2ind with USE_STR2IND=1, but the time to build the fw
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
132 will be significantly longer as the compiler has to be run twice for
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
133 each C source file, with str2ind sandwiched in between.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
134
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
135 The following Bourne shell variables are used inside the build system in the
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
136 individual component build recipes (components/*) but cannot be set on the
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
137 ./configure.sh line because they are fixed in the overall fw build recipes
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
138 (configs/*):
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
139
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
140 GPRS
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
141
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
142 Self-explanatory: enables or disables GPRS.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
143
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
144 MMI
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
145
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
146 TI's original config variable: MMI=0 for the AT-command-controlled
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
147 modem configuration or MMI=2 for the UI-enabled configuration with
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
148 BMI and MFW.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
149
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
150 SRVC
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
151
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
152 TI's original config variable, selects the presence or absence of data
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
153 services other than GPRS as follows:
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
154
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
155 SRVC=0: voice and SMS only
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
156 SRVC=1: CSD and fax enabled
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
157 SRVC=2: CSD enabled, but not fax
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
158
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
159 Finally, CHIPSET, DSP, RF and AMR variables reflect the physical configuration
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
160 of the selected target hw that no amount of software hacking can change.
569c3d522e5c doc/Config-vars: written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
161 (The AMR variable indicates the presence or absence of AMR support in the DSP.)