annotate doc/Compiling @ 202:2a93a98a1e26

src/g23m-aci/aci/cmh_smss.c: sAT_PercentCMGS() disabled for !FF_MMI_RIV like in TCS211 and in Citrine
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 14 Oct 2016 06:02:34 +0000
parents 596d86109e44
children 60cc20bfe18f
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
94
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
1 Preparing the development and build environment
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
2 ===============================================
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
3
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
4 In order to compile our FreeCalypso Magnetite firmware, you will need a
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5 Unix/Linux system. Even though we are using a compiler which we got in the
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6 form of Windows .exe binaries and thus have to use Wine (see below), everything
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7 that we have built on top of it is Unix-based. This author uses Slackware Linux
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8 version 13.37, 32-bit.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 You will need to install the following four pieces of software on whatever
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
11 machine you will use to run the FC Magnetite build process:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
12
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
13 1. Wine: self-explanatory.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
14
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
15 2. FreeCalypso Wine environment:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
16
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
17 ftp://ftp.freecalypso.org/pub/GSM/TI_src/wine/installed-env.tar.xz
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
18
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
19 Extract the content of the above tarball into your ~/.wine/drive_c
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
20 directory - that's all there is to it!
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
21
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
22 3. nowhine wrapper around Wine:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
23
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
24 ftp://ftp.freecalypso.org/pub/GSM/TI_src/wine/nowhine.c
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
25
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
26 Note that Wine may produce different whines on your system than it
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
27 does on mine, in which case if you wish to be relieved of those
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
28 whines, you'll need to edit my nowhine.c hack for your situation.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
29
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
30 4. mokosrec2bin flash image file format conversion utility:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
31
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
32 ftp://ftp.freecalypso.org/pub/GSM/GTA02/gsm-fw/mokosrec2bin.c
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
33
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
34 Note that the four host software pieces above are exactly the same as what has
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
35 been needed to build our previous TCS211-based fw works such as leo2moko-debug
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
36 and tcs211-c139 - thus if you have built those previously, you should already
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
37 have all of the necessary host tools.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
38
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
39 Compiling the local helper utilities
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
40 ====================================
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
41
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
42 (cd helpers; make)
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
43
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
44 Do the above. Most of the build helper scripts used in the FC Magnetite build
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
45 system are written in Bourne shell, but a few were easier to implement in C.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
46 You need to compile these C helper utilities before you can run an actual FC
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
47 Magnetite firmware build, but these utilities are totally ad hoc and specific
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
48 to the needs of our fw build system, hence they are not meant to be installed
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
49 globally on your system - instead they stay within the fc-magnetite tree. You
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
50 just need to run make in the helpers directory once before any actual firmware
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
51 builds.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
52
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
53 Actually building the firmware
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
54 ==============================
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
55
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
56 In order to build our FreeCalypso Magnetite firmware for a particular target in
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
57 a particular configuration, run a command like this from the top level of the
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
58 fc-magnetite tree:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
59
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
60 ./configure.sh gtamodem l1reconst
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
61
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
62 The first argument to the configure.sh script selects the target, and the second
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
63 argument selects the configuration. As of this writing, the following targets
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
64 are supported:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
65
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
66 c139 Motorola C139
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
67 fcdev3b FreeCalypso FCDEV3B (hardware designed but not built yet)
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
68 gtamodem The Calypso GSM/GPRS modem in Openmoko GTA01/02 smartphones
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
69 pirelli Pirelli DP-L10
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
70
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
71 For the available configurations (the second required argument to the configure
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
72 script), look in the configs directory. As of this writing, the most
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
73 interesting configuration is l1reconst - it was named so because it rebuilds L1
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
74 from the reconstructed source.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
75
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
76 Each configuration is built in its own directory; by default the build directory
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
77 is named build-$TARGET-$CONFIG, i.e., for the example configure.sh line above,
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
78 the resulting build directory will be build-gtamodem-l1reconst. You can change
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
79 the name of this directory by appending a BUILD_DIR=dir argument to the
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
80 ./configure.sh line after the two required arguments.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
81
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
82 To actually compile the firmware, cd into the created build directory and run
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
83 make there. Unfortunately the use of TI's proprietary compiler via Wine makes
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
84 the build very slow - it takes about 42 minutes on my machine. When it's all
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
85 done, the flashable firmware image will be in fwimage.bin. This image is to be
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
86 flashed with fc-loadtool at address 0x10000 on the C139 and at address 0 on all
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
87 other targets.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
88
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
89 When building firmware for the Pirelli or for future FreeCalypso hardware that
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
90 will use the same high capacity flash+pSRAM chip, one can build either a
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
91 flashable image or a RAM-loadable one - or both. Because this part of the
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
92 build system is common with other targets for which only flash images can be
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
93 produced, the Makefile always builds the flashable image by default -
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
94 fwimage.bin is always meant for flash and never for RAM. To build a RAM-
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
95 loadable image when the target allows it, run 'make ram' - the image will be in
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
96 ramimage.srec, which you can then load and run on the target with FreeCalypso
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
97 host tool fc-xram.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
98
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
99 Running on the hardware
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
100 =======================
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
101
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
102 In order to run the firmware you have built on your Calypso phone or modem
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
103 (flash or run in RAM as appropriate), you will need to use FreeCalypso host
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
104 tools. As of this writing, the latest packaged release is this one:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
105
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
106 ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/fc-host-tools-r4.tar.bz2
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
107
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
108 Please see target-specific notes for more details.