fc-magnetite: doc/C1xx-Howto annotate

annotate doc/C1xx-Howto @ 508:61f878c011b0

pseudo-modem keepalive: poll interval reduced to 5 s on C1xx and 10 s for USB

author	Mychaela Falconia <falcon@freecalypso.org>
date	Mon, 25 Jun 2018 06:20:23 +0000
parents	6530fc550836
children	682955c407b4

rev	line source
383 43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	1 Running FreeCalypso firmware on Motorola C1xx phones
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	2 ====================================================
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	3
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	4 Before we begin, it needs to be noted that running FreeCalypso fw on a C1xx
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	5 phone is very much akin to xenotransplantation: Mot C1xx hardware is an alien
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	6 to our FreeCalypso family (our native hw targets are those made by TI, Openmoko
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	7 and us, not Motorola or Compal), and our non-Compal-based, non-Mot-based
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	8 FreeCalypso fw is equally alien to the C1xx phones. The xenotransplantation
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	9 procedure of converting a C1xx phone to FreeCalypso is highly unnatural, and
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	10 involves a large number of cumbersome manual steps - you've been warned.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	11
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	12 Preparing the host system
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	13 =========================
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	14
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	15 Firmware flashing on Mot C1xx phones is accomplished through the headset jack
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	16 via a special cable. There is no need to disassemble the phone in any way or
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	17 to do any soldering or other hardware surgery, but you will need a host system
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	18 to run the multitude of special software tools that are involved in the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	19 procedure. You will need to begin by installing FreeCalypso host tools, and
457 6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	20 the current version of the FC-to-C1xx xenotransplantation procedure (the
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	21 additions from the previous version are RF calibration data migration and
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	22 battery charging configuration) requires the latest fc-host-tools-r8 release:
383 43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	23
457 6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	24 ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/fc-host-tools-r8.tar.bz2
383 43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	25
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	26 You will also need the battery charging configuration files:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	27
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	28 https://bitbucket.org/falconian/fc-battery-conf
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	29
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	30 Run 'make install' in the fc-battery-conf tree to add the battery charging
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	31 configuration files to your FC host tools installation under /opt/freecalypso.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	32
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	33 Flash backup and data gathering
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	34 ===============================
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	35
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	36 Before you begin the actual conversion of your C1xx phone to FreeCalypso, you
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	37 will need to gather the following pieces of information:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	38
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	39 * The phone's IMEI - we don't know how to extract it out of Mot/Compal's non-TI
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	40 flash data structures, so you will have to reset it manually after the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	41 firmware change. Of course you can set your "new" FreeCalypso IMEI to
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	42 whatever you feel like, but if you wish to keep the original factory-assigned
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	43 one, you will need to note it down manually, either from the sticker inside
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	44 the battery compartment (very hard to read!) or by booting the phone up
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	45 with its original fw prior to the conversion, entering *#06# and reading it
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	46 from the display.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	47
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	48 * Your specific phone's factory RF calibration values: you will need to make a
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	49 dump of your phone's flash memory (also serves as a backup, always a good
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	50 thing to have) with fc-loadtool and extract the numbers of interest with our
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	51 c1xx-calextr utility, which is part of the new FC host tools.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	52
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	53 * You need to know whether your phone has 900+1800 MHz or 850+1900 MHz bands -
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	54 you will need to communicate this information to the new fw after the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	55 conversion. To the best of our knowledge, all C11x/12x and C140 phones have
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	56 900+1800 MHz bands, but C139 phones have been made in both versions. On the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	57 phones that have passed through our hands so far, the first two digits of the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	58 IMEI have been 35 on 900+1800 MHz phones and 01 on 850+1900 MHz ones.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	59
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	60 * You need to know whether your phone has 2 MiB or 4 MiB flash. To the best of
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	61 our knowledge, all C139/140 phones have 4 MiB flash, but C11x have been seen
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	62 with both 2 MiB and 4 MiB flashes. The flash memory size will be autodetected
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	63 by fc-loadtool as part of making the flash dump.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	64
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	65 The Mother's method for keeping track of these per-phone bits of information is
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	66 to create a separate directory for each phone with the IMEI as the directory
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	67 name; the flash dump and the RF calibration bits extracted from it will then
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	68 reside in that directory, while the IMEI is in the name of the directory itself.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	69
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	70 Once you have created your per-phone directory and cd'ed into it, you are ready
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	71 to run fc-loadtool to capture the flash dump. The phone needs to be off, but
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	72 the battery needs to be present and have some charge in it; with the phone off,
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	73 connect the serial cable between your host computer and the phone's headset
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	74 jack, and run fc-loadtool as follows:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	75
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	76 fc-loadtool -h compal -c 1004 /dev/ttyXXX
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	77
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	78 Change /dev/ttyXXX to the serial or USB-serial device corresponding to your
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	79 serial cable. The -c 1004 option (adds a little inefficiency which is required
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	80 for C139/140) phones can be omitted if your phone is C11x/12x, but it is also
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	81 harmless to always add it. With the serial cable connected, the phone in the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	82 powered-off state and the fc-loadtool process running and waiting for the phone,
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	83 press the red power button on the phone - a momentary press is sufficient and
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	84 recommended.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	85
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	86 Once the phone boots the loadagent code fed to it serially by fc-loadtool and
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	87 you land at the loadtool> prompt, issue the following command:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	88
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	89 flash dump2bin flashdump.bin
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	90
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	91 Given this command, fc-loadtool will autodetect whether your phone has 2 MiB or
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	92 4 MiB flash, then make a dump of the complete content of this flash memory and
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	93 save it in a file named flashdump.bin in the current directory. When this
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	94 operation completes, exit the loadtool session with the exit command - it will
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	95 also cleanly power the phone off.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	96
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	97 The next step is to extract the RF calibration values. Run a command of the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	98 following form:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	99
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	100 c1xx-calextr -b rfbin flashdump.bin <offset>
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	101
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	102 Change <offset> to 0x1FC000 if your phone has 2 MiB flash (the size of
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	103 flashdump.bin is 2097152 bytes) or 0x3FC000 if it has 4 MiB flash (the size of
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	104 flashdump.bin is 4194304 bytes). The stdout scribbles from c1xx-calextr will
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	105 indicate which per-band calibration records it finds (from which you can tell
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	106 if the phone has 900+1800 MHz or 850+1900 MHz bands if you didn't have this
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	107 knowledge already), and a directory named rfbin will be created, containing the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	108 correct subtree of directories and files which will need to be uploaded into
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	109 the new FreeCalypso flash file system (FFS) under /gsm/rf after the firmware
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	110 change.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	111
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	112 Selecting and building the desired firmware config
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	113 ==================================================
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	114
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	115 There is only one FC Magnetite firmware configuration for C11x/12x phones, but
457 6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	116 for the better C139/140 phones there are several to choose from. The following
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	117 two configs are the currently recommended ones:
383 43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	118
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	119 hybrid-vpm This config is available for both C11x/12x and C139/140
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	120 subfamilies, although the actual fw images are different
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	121 between the two. In this configuration the converted phone
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	122 acts not as an end user phone, but as a voice pseudo-modem that
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	123 needs to be controlled by a host computer via a serial cable to
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	124 do anything interesting. See the Voice-pseudo-modem article
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	125 for more information.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	126
457 6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	127 hybrid-ui-vo This config is available only for the C139/140 target, not
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	128 C11x/12x. This configuration includes the UI layers, thus when
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	129 a C139/140 phone runs this firmware, it is able to function as
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	130 an untethered phone without a host computer connection.
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	131 However, please be warned that this proof-of-concept UI is
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	132 nowhere close to being practically usable - see the
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	133 Handset-goal article for more info.
383 43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	134
457 6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	135 Both of the above are hybrid configurations in that they use the new TCS3
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	136 versions of the G23M protocol stack and ACI (Application Control Interface)
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	137 firmware components grafted on top of the TCS211 chipsetsw foundation, resulting
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	138 in a fully built-from-source configuration without major blob components. The
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	139 UI layers BMI and MFW in the UI-enabled hybrid-ui-vo config also come from the
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	140 new TCS3 source, not the old version of unknown origin. They are "voice only"
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	141 configs in that CSD, fax and GPRS functions are disabled - these functions
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	142 cannot be made use of on Mot C1xx phones, and disabling them significantly
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	143 reduces the weight of the firmware.
383 43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	144
457 6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	145 For the C139/140 target (but not for C11x/12x), it is also possible to build
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	146 some of the older configs that use the old binary blob version of the G23M PS
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	147 component and the corresponding old versions of ACI, MFW and BMI on top of it -
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	148 however, those configuration are now officially deprecated except for only two
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	149 remaining use cases which do not apply to Mot C1xx targets, hence they are no
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	150 longer supported officially.
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	151
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	152 Thus we have a total of 3 possible build configurations, one for the C11x
6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	153 target and 2 for the C139:
383 43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	154
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	155 ./configure.sh c11x hybrid-vpm
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	156 ./configure.sh c139 hybrid-vpm
457 6530fc550836 doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo Mychaela Falconia <falcon@freecalypso.org> parents: 383 diff changeset	157 ./configure.sh c139 hybrid-ui-vo
383 43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	158
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	159 See the Compiling article for more information on how to compile your own
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	160 firmware image in one of the above configurations.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	161
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	162 If this is your first time converting a given C1xx phone from its original
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	163 firmware to FreeCalypso (as opposed to updating from an earlier FC firmware
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	164 version), you will also need the compal-flash-boot-for-fc.bin bootloader image
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	165 in addition to the main fw image you just built:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	166
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	167 ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/compal-flash-boot-for-fc.bin
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	168
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	169 Mot C1xx phones are brickable - because the Calypso boot ROM is disabled by PCB
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	170 wiring, the ability to reflash a phone with new firmware critically depends on
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	171 there being a particular kind of boot code in flash sector 0 at all times - a
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	172 particular kind of boot code that allows the boot process to be interrupted and
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	173 diverted to external code loaded via the headset jack serial port.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	174
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	175 The FreeCalypso family of projects has adopted one specific version of the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	176 flash sector 0 boot code (produced by applying a binary patch to one of
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	177 Compal/Motorola's original versions) for use with all of our firmwares for
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	178 these phones. We use the same FC-C1xx bootloader on both C11x/12x and C139/140
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	179 phones: the official bootloader versions are different between the two (and
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	180 moreover, each particular official fw version comes with its own bootloader
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	181 version), but the simpler bootloader version which we took from one particular
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	182 C11x fw version works perfectly well on the C139 as well, hence we've adopted
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	183 it for all combinations.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	184
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	185 Once you have our compal-flash-boot-for-fc.bin image flashed in sector 0, you
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	186 can then flash whichever FC firmware image you like at offset 0x10000 without
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	187 having to touch the dangerous boot sector.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	188
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	189 Converting the phone to FreeCalypso fw
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	190 ======================================
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	191
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	192 If you are starting with an unhacked C1xx phone running one of the official
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	193 firmware versions, the procedure for flashing and bringing up FreeCalypso for
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	194 the first time is as follows - after you have done all of the preparatory
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	195 steps described in the preceding sections:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	196
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	197 * Have your phone's battery fully charged - although you will regain the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	198 ability to charge it with FreeCalypso fw when the conversion is fully
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	199 complete (not just the flashing part, but also the subsequent FFS
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	200 initialization), your phone will not have this charging ability while you are
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	201 in the middle of the xenotransplantation procedure.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	202
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	203 * Get in with fc-loadtool just like you did when you made the dump of your
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	204 phone's flash memory for backup and RF calibration data extraction.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	205
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	206 * Once you are in with fc-loadtool, i.e., at the loadtool> prompt, reflash the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	207 boot sector with the FreeCalypso version:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	208
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	209 loadtool> flash erase-program-boot compal-flash-boot-for-fc.bin
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	210
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	211 * To flash whichever FreeCalypso firmware image you would like to play with,
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	212 execute the flashing script which the fw build system produced along with the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	213 actual image:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	214
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	215 loadtool> exec flash-script
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	216
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	217 * Erase the flash sectors to be used for the FFS (flash file system) by
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	218 FreeCalypso firmwares; the specific command depends on whether your phone has
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	219 2 MiB or 4 MiB flash. On 2 MiB flash phones:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	220
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	221 loadtool> flash erase 0x1C0000 0x30000
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	222
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	223 Or on 4 MiB flash phones:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	224
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	225 loadtool> flash erase 0x3C0000 0x30000
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	226
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	227 * Exiting fc-loadtool cleanly will cause it to power off the phone:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	228
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	229 loadtool> exit
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	230
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	231 Reflashing between different FreeCalypso firmwares
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	232 ==================================================
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	233
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	234 By the conventions established in the FreeCalypso family of projects, all of
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	235 our firmwares for C11x and C139 targets have the following in common:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	236
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	237 * They all stay out of the boot sector and expect to receive control from the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	238 boot code in the same manner (boot entry point at 0x10058, exception vectors
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	239 at 0x10000), thus there is no need to reflash the dangerous boot sector when
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	240 going from one FC firmware to another.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	241
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	242 * They all use the same aftermarket FFS configuration of 3 sectors of 64 KiB
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	243 each (64x3) at 0x3C0000 on 4 MiB flash phones, or at 0x1C0000 on 2 MiB flash
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	244 phones. This FFS location is deliberately different from the one used by
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	245 Mot/Compal's firmwares, eliminating the possibility of one fw trying to use
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	246 the FFS created by the other, and by putting our FFS toward the end of the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	247 flash we maximize the amount of flash space available for our firmware code
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	248 images. But even though we don't share our FFS with Mot/Compal's official
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	249 firmwares, we do share the same FFS between all of FreeCalypso firmware
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	250 projects - thus once you have initialized your FFS (see below) with one FC
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	251 firmware version, it will work with the others as well.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	252
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	253 If you need to reflash your C1xx phone from one FC firmware version to another,
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	254 simply get in with fc-loadtool -h compal (no more need for the inefficient
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	255 -c 1003 or -c 1004 options or for tfc139) and reflash just the fw image part:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	256
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	257 loadtool> exec flash-script
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	258
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	259 First boot of the firmware
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	260 ==========================
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	261
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	262 Connect the serial cable, but instead of running fc-loadtool, run rvinterf.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	263 Press the red power button on the phone briefly just like you would for
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	264 fc-loadtool entry. Because there is no fc-loadtool running on the host end of
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	265 the serial cable, the boot path will not be diverted in the bootloader, and
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	266 the main fw image will run - and this time it will be the FreeCalypso firmware
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	267 you have compiled and flashed. If the fw you have flashed is the UI demo
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	268 configuration, the phone must have NO SIM in it the first time you boot it.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	269 UI-enabled fw configurations automatically bring up the GSM radio and try to
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	270 connect to the default network on boot if there is a SIM present, and you don't
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	271 want your firmware trying to connect to a real live GSM network when you haven't
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	272 initialized your FFS yet. If the fw you have flashed is one of the AT-command-
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	273 controlled pseudo-modem configurations, then you don't need to worry if the SIM
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	274 is there or not on your first boot - just don't command it to connect to a
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	275 network until you have initialized the FFS.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	276
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	277 If you have flashed a non-UI firmware version, the phone's LCD will remain dark
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	278 as there is no LCD driver code in this firmware, but you will see trace output
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	279 in the rvinterf window, telling you that the fw is running.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	280
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	281 Before you do anything else, you will need to run fc-fsio and initialize the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	282 aftermarket FFS for our firmware:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	283
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	284 fsio> format /
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	285 fsio> mk-std-dirs
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	286 fsio> set-imeisv fc XXXXXXXX-YYYYYY-ZZ (punctuation optional, place anywhere)
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	287 fsio> set-rfcap dual-eu (if you have 900+1800 MHz hardware)
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	288 or
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	289 fsio> set-rfcap dual-us (if you have 850+1900 MHz hardware)
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	290
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	291 then additionally:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	292
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	293 fsio> upload-subtree rfbin /gsm/rf
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	294 fsio> write-charging-config /opt/freecalypso/charging/c1xx/standard
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	295
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	296 The last two commands are new with the 2018-01 revision of the FC-to-C1xx
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	297 xenotransplantation procedure. The upload-subtree command uploads the RF
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	298 calibration values which you had extracted earlier with c1xx-calextr (the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	299 instructions assume that you are running from the same directory where the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	300 rfbin directory subtree had been created earlier), and this step is necessary
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	301 in order for your phone to continue to transmit at the correct power levels
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	302 after the conversion. The write-charging-config command uploads the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	303 configuration settings for the FCHG battery charging driver, without which it
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	304 cannot charge the battery; you must have the charging config files from the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	305 fc-battery-conf tree installed under /opt/freecalypso in order for this command
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	306 to work as given.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	307
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	308 It needs to be noted that the battery charging config settings uploaded with
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	309 fc-fsio write-charging-config take effect only on the next boot cycle of the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	310 firmware, i.e., until the next reboot after the write-charging-config operation,
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	311 the firmware won't charge the battery even if there is a charging power source
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	312 plugged in.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	313
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	314 After you've initialized your FFS as above, you should exit fc-fsio, and your
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	315 next steps will depend on which fw configuration you are playing with. If it's
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	316 the sans-UI pseudo-modem configuration, run fc-shell and try some AT commands:
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	317
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	318 AT+CMEE=2 -- enable verbose error responses
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	319 AT+CFUN=1 -- enable radio and SIM interfaces
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	320 AT+COPS=0 -- register to the default GSM network
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	321
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	322 When you are done, you can power the phone off by sending a 'poweroff' command
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	323 through fc-shell, or you can kill rvinterf and wait for the firmware to power
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	324 off by the keepalive timeout after some 60 to 80 s.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	325
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	326 If you are playing with the UI demo firmware, after you have initialized your
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	327 FFS, you can power the phone off with the power button, insert a SIM, power it
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	328 back on and play with the primitive UI.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	329
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	330 Updating from previous versions
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	331 ===============================
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	332
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	333 If you had previously initialized your aftermarket FFS using an earlier version
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	334 of these instructions, before we added the RF calibration and charging config
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	335 upload steps, you need to add these bits to your FFS. Update to the latest FC
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	336 host tools, extract the factory RF calibration values from a dump of your
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	337 phone's flash with c1xx-calextr, add the battery charging config files to your
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	338 /opt/freecalypso installation, boot the phone with rvinterf, get in with fc-fsio
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	339 and run the last two upload-subtree and write-charging-config commands as above.
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	340
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	341 Recalibration
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	342 =============
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	343
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	344 In the interest of completeness, it needs to be noted that extracting Motorola's
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	345 original factory RF calibration values and reusing them for FreeCalypso is not
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	346 the only way: the other alternative is to perform a fresh calibration using a
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	347 Rohde&Schwarz CMU200 RF test machine and FreeCalypso RF calibration software
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	348 (fc-rfcal-tools). This approach will yield superior results, but the
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	349 requirement of having a CMU200 instrument which is itself properly calibrated
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	350 and a cabling setup with the right adapters whose insertion loss at particular
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	351 GSM frequencies is precisely known makes this approach feasible only for
43dbedde9d80 doc/C1xx-Howto written Mychaela Falconia <falcon@freecalypso.org> parents: diff changeset	352 professional FreeCalypso service shops, not for ordinary individual users.

FreeCalypso > hg > fc-magnetite

annotate doc/C1xx-Howto @ 508:61f878c011b0