FreeCalypso > hg > fc-magnetite
annotate components/uart_drv @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 29 May 2020 03:55:36 +0000 |
parents | 6d1eac845d3e |
children |
rev | line source |
---|---|
51 | 1 # Building uart_drv.lib |
2 | |
3 CFLAGS="-mn -mt -o -x -mw -me -pw2" | |
4 CPPFLAGS="-DTOOL_CHOICE=0 -D_TMS470" | |
5 | |
307
6d1eac845d3e
make it possible to enable SERIAL_DYNAMIC_SWITCH on the configure.sh line
Mychaela Falconia <falcon@freecalypso.org>
parents:
51
diff
changeset
|
6 if [ "$SERIAL_DYNAMIC_SWITCH" = 1 ] |
6d1eac845d3e
make it possible to enable SERIAL_DYNAMIC_SWITCH on the configure.sh line
Mychaela Falconia <falcon@freecalypso.org>
parents:
51
diff
changeset
|
7 then |
6d1eac845d3e
make it possible to enable SERIAL_DYNAMIC_SWITCH on the configure.sh line
Mychaela Falconia <falcon@freecalypso.org>
parents:
51
diff
changeset
|
8 CPPFLAGS="$CPPFLAGS -DSERIAL_DYNAMIC_SWITCH" |
6d1eac845d3e
make it possible to enable SERIAL_DYNAMIC_SWITCH on the configure.sh line
Mychaela Falconia <falcon@freecalypso.org>
parents:
51
diff
changeset
|
9 fi |
6d1eac845d3e
make it possible to enable SERIAL_DYNAMIC_SWITCH on the configure.sh line
Mychaela Falconia <falcon@freecalypso.org>
parents:
51
diff
changeset
|
10 |
51 | 11 # Includes |
12 | |
13 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app" | |
14 CPPFLAGS="$CPPFLAGS -I$SRC/cs/os/nucleus" | |
15 CPPFLAGS="$CPPFLAGS -I.." | |
16 CPPFLAGS="$CPPFLAGS -I../config" | |
17 CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/inc" | |
18 CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/frame/cust_os" | |
19 CPPFLAGS="$CPPFLAGS -I$SRC/cs/system" | |
20 CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera" | |
21 CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera/rv" | |
22 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core" | |
23 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/abb" | |
24 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/armio" | |
25 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/clkm" | |
26 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/conf" | |
27 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dma" | |
28 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dsp_dwnld" | |
29 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/inth" | |
30 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/memif" | |
31 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/rhea" | |
32 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/security" | |
33 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/spi" | |
34 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/timer" | |
35 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/uart" | |
36 CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/ulpd" | |
37 CPPFLAGS="$CPPFLAGS -I$SRC/cs/services" | |
38 | |
39 # Source modules | |
40 | |
41 SRCDIR=$SRC/cs/drivers/drv_app/uart | |
42 | |
43 cfile_plain $SRCDIR/serialswitch.c | |
44 cfile_plain $SRCDIR/uartfax.c |