FreeCalypso > hg > fc-magnetite
annotate doc/Freerunner-Howto @ 673:62a5285e014a
Lorekeeping: allow tpudrv-leonardo.lib on Leonardo/Tango
Back in 2015 the Mother's idea was to produce a FreeCalypso development
board that would be a clone of TI Leonardo, including the original
quadband RFFE; one major additional stipulation was that this board
needed to be able to run original unmodified TCS211-20070608 firmware
with all blobs intact, with only minimal binary patches to main.lib
and tpudrv.lib. The necessary patched libs were produced at that time
in the tcs211-patches repository.
That plan was changed and we produced FCDEV3B instead, with Openmoko's
triband RFFE instead of Leonardo quadband, but when FC Magnetite started
in 2016, a TPUDRV_blob= provision was still made, allowing the possibility
of patching OM's tpudrv.lib for a restored Leonardo RFFE.
Now in 2020 we have FC Tango which is essentially a verbatim clone of
Leonardo core, including the original quadband RFFE. We have also
deblobbed our firmware so much that we have absolutely no real need
for a blob version of tpudrv.lib - but I thought it would be neat to put
the ancient TPUDRV_blob= mechanism (classic config) to its originally
intended use, just for the heck of it.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 29 May 2020 03:55:36 +0000 |
parents | c9a65db8be4a |
children |
rev | line source |
---|---|
373
9399a83cb394
first round of documentation updates for 2018
Mychaela Falconia <falcon@freecalypso.org>
parents:
222
diff
changeset
|
1 The latest official firmware for Openmoko Neo1973 and Neo FreeRunner Calypso |
485
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
2 modems is moko13 as of this writing; moko13 is FreeCalypso Magnetite Hg |
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
3 changeset 286:840113655bbf built for the gtamodem target in the l1reconst |
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
4 configuration. There have been many changes in FC Magnetite since then, but |
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
5 few of them affect the l1reconst config on the gtamodem target in any |
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
6 noticeable way. The few noticeable post-moko13 changes which we do have in our |
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
7 current l1reconst code are not deemed important enough to justify making |
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
8 another formal release for a no-longer-made hardware platform that no longer |
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
9 has any real user community either. |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 |
373
9399a83cb394
first round of documentation updates for 2018
Mychaela Falconia <falcon@freecalypso.org>
parents:
222
diff
changeset
|
11 However, we also have the new TCS2/TCS3 hybrid config in which the old version |
9399a83cb394
first round of documentation updates for 2018
Mychaela Falconia <falcon@freecalypso.org>
parents:
222
diff
changeset
|
12 of the G23M protocol stack from Openmoko (binary libs only, no source) has been |
9399a83cb394
first round of documentation updates for 2018
Mychaela Falconia <falcon@freecalypso.org>
parents:
222
diff
changeset
|
13 replaced with a newer version from TI's TCS3/LoCosto program, and this new |
485
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
14 version is full source. This hybrid firmware has now reached the state where |
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
15 it is ready to be exercised by adventurous beta users in real-life usage. |
222
79cb194284ca
doc/Freerunner-Howto: update for the TCS2/TCS3 hybrid development
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
16 |
373
9399a83cb394
first round of documentation updates for 2018
Mychaela Falconia <falcon@freecalypso.org>
parents:
222
diff
changeset
|
17 The new hybrid fw for the gtamodem target can be built as follows: |
222
79cb194284ca
doc/Freerunner-Howto: update for the TCS2/TCS3 hybrid development
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
18 |
79cb194284ca
doc/Freerunner-Howto: update for the TCS2/TCS3 hybrid development
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
19 ./configure.sh gtamodem hybrid |
79cb194284ca
doc/Freerunner-Howto: update for the TCS2/TCS3 hybrid development
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
20 cd build-gtamodem-hybrid; make |
79cb194284ca
doc/Freerunner-Howto: update for the TCS2/TCS3 hybrid development
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
21 |
79cb194284ca
doc/Freerunner-Howto: update for the TCS2/TCS3 hybrid development
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
22 Then after enduring the very slow build, you can flash it with fc-loadtool: |
79cb194284ca
doc/Freerunner-Howto: update for the TCS2/TCS3 hybrid development
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
23 |
79cb194284ca
doc/Freerunner-Howto: update for the TCS2/TCS3 hybrid development
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
24 loadtool> flash erase 0 0x250000 |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 loadtool> flash program-bin 0 fwimage.bin |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
26 |
222
79cb194284ca
doc/Freerunner-Howto: update for the TCS2/TCS3 hybrid development
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
27 If you are brave enough to do the above, please let us know how this new modem |
79cb194284ca
doc/Freerunner-Howto: update for the TCS2/TCS3 hybrid development
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
28 firmware fares when driven by QtMoko or SHR on the AP - it would definitely be |
485
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
29 an adventure! We would be most interested in working with developers or |
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
30 maintainers of specific AP software components that are directly responsible |
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
31 for talking AT commands to the modem, if there are any such developers or |
c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
32 maintainers still around. |