FreeCalypso > hg > fc-magnetite
annotate doc/Compiling @ 620:76f09f1bea5d
config system: generalized mechanism for overriding Calypso chip version
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 07 Oct 2019 02:09:53 +0000 |
parents | 2bd7c1dcac4b |
children | 41238a8e140c |
rev | line source |
---|---|
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 Preparing the development and build environment |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 =============================================== |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 In order to compile our FreeCalypso Magnetite firmware, you will need a |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 Unix/Linux system. Even though we are using a compiler which we got in the |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 form of Windows .exe binaries and thus have to use Wine (see below), everything |
531
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
7 that we have built on top of it is Unix-based. The Mother currently uses |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
8 Slackware Linux release 14.2 (32-bit) and previously used Slackware 13.37, |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
9 also 32-bit. |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 |
531
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
11 You will need to install the following 3 pieces of software on whatever |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
12 machine you will use to run the FC Magnetite build process: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
13 |
531
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
14 1. Wine: self-explanatory. The Mother uses the following Slackware package: |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
15 |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
16 https://www.freecalypso.org/members/falcon/slackware/wine-1.5.23-i486-1sg.txz |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
17 |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
18 I originally used it with Slackware 13.37 and I am still able to use it |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
19 with 14.2 without any issues. |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
20 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
21 2. FreeCalypso Wine environment: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
22 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
23 ftp://ftp.freecalypso.org/pub/GSM/TI_src/wine/installed-env.tar.xz |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
24 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 Extract the content of the above tarball into your ~/.wine/drive_c |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
26 directory - that's all there is to it! |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
27 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
28 3. nowhine wrapper around Wine: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
29 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
30 ftp://ftp.freecalypso.org/pub/GSM/TI_src/wine/nowhine.c |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
31 |
531
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
32 The purpose of this wrapper is to suppress the following obnoxious whine |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
33 which wine emits on my system: |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
34 |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
35 preloader: Warning: failed to reserve range 00010000-00110000 |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
36 |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
37 Wine will also emits a bunch of other whines if you have to run it |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
38 in an environment without an X11 display (e.g., on a machine that you |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
39 ssh into), and our nowhine wrapper suppresses those as well. |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
40 |
531
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
41 If wine does not emit those preloader whines on your system and you |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
42 never find yourself in a situation of having to run without an X11 |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
43 display and thus you find our nowhine wrapper to be unnecessary, |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
44 you can skip the wrapper and create a nowhine symlink pointing directly |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
45 to wine. |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
46 |
531
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
47 The mokosrec2bin flash image file format conversion utility is now included |
6917ea63bffa
doc/Compiling: Slackware, Wine and mokosrec2bin updates
Mychaela Falconia <falcon@freecalypso.org>
parents:
522
diff
changeset
|
48 locally and no longer needs to be provided externally. |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
49 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
50 Compiling the local helper utilities |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
51 ==================================== |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
52 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
53 (cd helpers; make) |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
54 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
55 Do the above. Most of the build helper scripts used in the FC Magnetite build |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
56 system are written in Bourne shell, but a few were easier to implement in C. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
57 You need to compile these C helper utilities before you can run an actual FC |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
58 Magnetite firmware build, but these utilities are totally ad hoc and specific |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
59 to the needs of our fw build system, hence they are not meant to be installed |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
60 globally on your system - instead they stay within the fc-magnetite tree. You |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
61 just need to run make in the helpers directory once before any actual firmware |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
62 builds. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
63 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
64 Actually building the firmware |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
65 ============================== |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
66 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
67 In order to build our FreeCalypso Magnetite firmware for a particular target in |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
68 a particular configuration, run a command like this from the top level of the |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
69 fc-magnetite tree: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
70 |
522
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
71 ./configure.sh fcdev3b hybrid |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
72 |
522
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
73 The first required argument to the configure.sh script selects the target, the |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
74 second required argument selects the build configuration recipe, and any further |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
75 arguments beyond these two (optional) allow changing various configurable |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
76 settings that aren't strictly fixed by the hardware target or by the build |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
77 configuration recipe. |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
78 |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
79 As of this writing, the following hardware targets are supported: |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
80 |
381
c6823ed06f9c
doc/Compiling: update for C11x and for the speed-up trick
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
81 c11x Motorola C11x/12x |
c6823ed06f9c
doc/Compiling: update for C11x and for the speed-up trick
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
82 c139 Motorola C139/140 |
540
f551ffdfe938
doc/Compiling: update for c155 target support and fc-host-tools-r9
Mychaela Falconia <falcon@freecalypso.org>
parents:
531
diff
changeset
|
83 c155 Motorola C155/156 |
461
69da44f2909e
doc/Compiling: mention that the dsample target is currently D-Sample C05
Mychaela Falconia <falcon@freecalypso.org>
parents:
458
diff
changeset
|
84 dsample TI's D-Sample C05 board (no working radio currently) |
251
6c594ce434f8
doc/Compiling: update for the FCDEV3B and for fc-host-tools-r5
Mychaela Falconia <falcon@freecalypso.org>
parents:
220
diff
changeset
|
85 fcdev3b FreeCalypso FCDEV3B |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
86 gtamodem The Calypso GSM/GPRS modem in Openmoko GTA01/02 smartphones |
615
2bd7c1dcac4b
doc/Compiling: fc-host-tools-latest symlink
Mychaela Falconia <falcon@freecalypso.org>
parents:
611
diff
changeset
|
87 gtm900 Huawei GTM900-B |
593
d25f6e216566
doc/Compiling: update for SE J100 target and fc-host-tools-r10
Mychaela Falconia <falcon@freecalypso.org>
parents:
544
diff
changeset
|
88 j100 Sony Ericsson J100 |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
89 pirelli Pirelli DP-L10 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
90 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
91 For the available configurations (the second required argument to the configure |
373
9399a83cb394
first round of documentation updates for 2018
Mychaela Falconia <falcon@freecalypso.org>
parents:
311
diff
changeset
|
92 script), look in the configs directory and read the various write-ups under doc. |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
93 |
522
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
94 Each configuration is built in its own directory; the name of this build |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
95 directory takes the form of build-$TARGET-$CONFIG$SUFFIX, i.e., for the example |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
96 configure.sh line above, the resulting build directory will be named |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
97 build-fcdev3b-hybrid. The $SUFFIX part is empty by default, but can be set on |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
98 the command line in order to distinguish non-standard builds that had some |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
99 tunable settings changed to values other than the default. For example, if you |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
100 are building the hybrid configuration for the fcdev3b target as above, but you |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
101 need to disable MELODY_E2, you could run the configure script as follows: |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
102 |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
103 ./configure.sh fcdev3b hybrid MELODY_E2=0 SUFFIX=-noe2 |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
104 |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
105 The build directory would then become build-fcdev3b-hybrid-noe2, and the |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
106 specified suffix will also be included in the firmware version ID string that |
9363ea39c74c
configure.sh: implemented SUFFIX= setting, replacing raw BUILD_DIR=
Mychaela Falconia <falcon@freecalypso.org>
parents:
461
diff
changeset
|
107 gets compiled into the image. |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
108 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
109 To actually compile the firmware, cd into the created build directory and run |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
110 make there. Unfortunately the use of TI's proprietary compiler via Wine makes |
381
c6823ed06f9c
doc/Compiling: update for C11x and for the speed-up trick
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
111 the build quite slow, but there is a trick to speed it up: if you run some |
c6823ed06f9c
doc/Compiling: update for C11x and for the speed-up trick
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
112 other Wine program that stays open and does not exit on its own (e.g., wine cmd) |
c6823ed06f9c
doc/Compiling: update for C11x and for the speed-up trick
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
113 in another window and leave it open while you run your FC Magnetite fw build, |
c6823ed06f9c
doc/Compiling: update for C11x and for the speed-up trick
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
114 the build will proceed much faster - the presence of another Wine process using |
c6823ed06f9c
doc/Compiling: update for C11x and for the speed-up trick
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
115 the wineserver environment will keep Wine from shutting this environment down |
c6823ed06f9c
doc/Compiling: update for C11x and for the speed-up trick
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
116 and restarting it for every individual cl470 run, i.e., for each individual C |
c6823ed06f9c
doc/Compiling: update for C11x and for the speed-up trick
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
117 source file. |
c6823ed06f9c
doc/Compiling: update for C11x and for the speed-up trick
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
118 |
c6823ed06f9c
doc/Compiling: update for C11x and for the speed-up trick
Mychaela Falconia <falcon@freecalypso.org>
parents:
373
diff
changeset
|
119 When the build is done, the flashable firmware image will be in fwimage.bin. |
540
f551ffdfe938
doc/Compiling: update for c155 target support and fc-host-tools-r9
Mychaela Falconia <falcon@freecalypso.org>
parents:
531
diff
changeset
|
120 This image is to be flashed with fc-loadtool at a target-dependent base address. |
f551ffdfe938
doc/Compiling: update for c155 target support and fc-host-tools-r9
Mychaela Falconia <falcon@freecalypso.org>
parents:
531
diff
changeset
|
121 The build system also produces a short text file named flash-script which is a |
f551ffdfe938
doc/Compiling: update for c155 target support and fc-host-tools-r9
Mychaela Falconia <falcon@freecalypso.org>
parents:
531
diff
changeset
|
122 flashing command script for fc-loadtool that erases the correct range of flash |
f551ffdfe938
doc/Compiling: update for c155 target support and fc-host-tools-r9
Mychaela Falconia <falcon@freecalypso.org>
parents:
531
diff
changeset
|
123 sectors and then programs fwimage.bin at the right address. |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
124 |
251
6c594ce434f8
doc/Compiling: update for the FCDEV3B and for fc-host-tools-r5
Mychaela Falconia <falcon@freecalypso.org>
parents:
220
diff
changeset
|
125 When building firmware for the FCDEV3B or for the Pirelli, one can build either |
6c594ce434f8
doc/Compiling: update for the FCDEV3B and for fc-host-tools-r5
Mychaela Falconia <falcon@freecalypso.org>
parents:
220
diff
changeset
|
126 a flashable image or a RAM-loadable one - or both. Because this part of the |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
127 build system is common with other targets for which only flash images can be |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
128 produced, the Makefile always builds the flashable image by default - |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
129 fwimage.bin is always meant for flash and never for RAM. To build a RAM- |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
130 loadable image when the target allows it, run 'make ram' - the image will be in |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
131 ramimage.srec, which you can then load and run on the target with FreeCalypso |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
132 host tool fc-xram. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
133 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
134 Running on the hardware |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
135 ======================= |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
136 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
137 In order to run the firmware you have built on your Calypso phone or modem |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
138 (flash or run in RAM as appropriate), you will need to use FreeCalypso host |
615
2bd7c1dcac4b
doc/Compiling: fc-host-tools-latest symlink
Mychaela Falconia <falcon@freecalypso.org>
parents:
611
diff
changeset
|
139 tools. The current version at any given moment can be found at this URL: |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
140 |
615
2bd7c1dcac4b
doc/Compiling: fc-host-tools-latest symlink
Mychaela Falconia <falcon@freecalypso.org>
parents:
611
diff
changeset
|
141 ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/fc-host-tools-latest.tar.bz2 |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
142 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
143 Please see target-specific notes for more details. |