FreeCalypso > hg > fc-magnetite
annotate doc/D-Sample @ 600:8f50b202e81f
board preprocessor conditionals: prep for more FC hw in the future
This change eliminates the CONFIG_TARGET_FCDEV3B preprocessor symbol and
all preprocessor conditionals throughout the code base that tested for it,
replacing them with CONFIG_TARGET_FCFAM or CONFIG_TARGET_FCMODEM. These
new symbols are specified as follows:
CONFIG_TARGET_FCFAM is intended to cover all hardware designs created by
Mother Mychaela under the FreeCalypso trademark. This family will include
modem products (repackagings of the FCDEV3B, possibly with RFFE or even
RF transceiver changes), and also my desired FreeCalypso handset product.
CONFIG_TARGET_FCMODEM is intended to cover all FreeCalypso modem products
(which will be firmware-compatible with the FCDEV3B if they use TI Rita
transceiver, or will require a different fw build if we switch to one of
Silabs Aero transceivers), but not the handset product. Right now this
CONFIG_TARGET_FCMODEM preprocessor symbol is used to conditionalize
everything dealing with MCSI.
At the present moment the future of FC hardware evolution is still unknown:
it is not known whether we will ever have any beyond-FCDEV3B hardware at all
(contingent on uncertain funding), and if we do produce further FC hardware
designs, it is not known whether they will retain the same FIC modem core
(triband), if we are going to have a quadband design that still retains the
classic Rita transceiver, or if we are going to switch to Silabs Aero II
or some other transceiver. If we produce a quadband modem that still uses
Rita, it will run exactly the same fw as the FCDEV3B thanks to the way we
define TSPACT signals for the RF_FAM=12 && CONFIG_TARGET_FCFAM combination,
and the current fcdev3b build target will be renamed to fcmodem. OTOH, if
that putative quadband modem will be Aero-based, then it will require a
different fw build target, the fcdev3b target will stay as it is, and the
two targets will both define CONFIG_TARGET_FCFAM and CONFIG_TARGET_FCMODEM,
but will have different RF_FAM numbers. But no matter which way we are
going to evolve, it is not right to have conditionals on CONFIG_TARGET_FCDEV3B
in places like ACI, and the present change clears the way for future
evolution.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 01 Apr 2019 01:05:24 +0000 |
parents | 4d4f0bba9469 |
children | ed403a239ec6 |
rev | line source |
---|---|
460
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 Back In The Day TI had an official and well-supported platform for Calypso |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 software development; this platform was called D-Sample. It consisted of a |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 development board with the Calypso+Iota chipset on it (as well as a GSM RF |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 section based on their older Clara RF transceiver chip) plus an attached test |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 handset. Here are some pictures: |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
7 https://www.freecalypso.org/members/falcon/pictures/D-Sample/ |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
8 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
9 I (Mychaela) have managed to obtain one of these historical D-Sample kits (the |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 one pictured) back in 2015. Given that this D-Sample board was the original |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
11 and most native hw target for the TCS211 firmware program, and given that our |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
12 FreeCalypso Magnetite firmware project is essentially a resurrection and |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
13 continuation of that TCS211 fw program, I naturally have a strong desire to |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
14 have our firmware run on this board in its full glory like it once ran in the |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
15 offices or cubicles of TI's own software engineers who worked on various parts |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
16 of TCS211 fw for the Calypso. |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
17 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
18 The current state of support is that we have everything other than the GSM radio |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
19 working. We are currently unable to bring up the radio tract on the D-Sample |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
20 board with our own Magnetite fw because of Clara RF: we only got a stripped |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
21 semi-src version of TCS211 in which the *.c files for L1 were censored out and |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
22 only *.obj blobs were supplied instead; the latter blobs target Rita RF and not |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
23 Clara. We have now successfully reconstructed the lost C sources for the RF- |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
24 independent and Rita-specific L1 modules, and we have l1_rf10.c for Clara RF |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 from the MV100 source fragments, but we are still missing the tpudrv10.c module |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
26 which is also required for Clara RF. Right now if one builds our current |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
27 Magnetite fw for target dsample, a placeholder stub version of tpudrv10.c is |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
28 used - it allows the firmware to link, but does not do any actual RF control, |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
29 thus any attempts to bring up the radio immediately fail. |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
30 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
31 Despite having no working radio, everything else works: we can flash our own |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
32 Magnetite fw images into the board with our fc-loadtool (fc-host-tools-r8 or |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
33 later; earlier versions did not support the 28F640W30B flash chip correctly), |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
34 the SIM interface works, the audio subsystem driven by the Calypso DSP driven |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
35 by our reconstructed TCS211 L1 works (can make beeps through the loudspeaker in |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
36 the handset part of the kit), the handset keypad works, and when we run a |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
37 firmware image built with the UI layers enabled, the 176x220 pixel color UI |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
38 shows up on the big LCD. Because the SIM interface works, one can play with |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
39 this UI a fair bit despite having no working GSM radio: the UI behaves the same |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
40 way as any regular phone would in the absence of coverage, so one can step |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
41 through the menus, read SIM phonebook entries and stored messages. |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
42 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
43 Apparent hardware defect in our D-Sample LCD |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
44 ============================================ |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
45 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
46 The one specific D-Sample board we have managed to score (might be the last one |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
47 left in the world, who knows) appears to be an early board: it is PCB rev 3, |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
48 but it has an early C05 version of the Calypso chip (F741979B), and it was made |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
49 some time in 2002. It came flashed with a firmware image built on 20020917, |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
50 and this original image it came with did not light up the LCD at all - it only |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
51 responded to AT commands. (Examination of that fw image suggests that it has |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
52 SMI instead of BMI+MFW, but I am not familiar with SMI at all - all I can tell |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
53 is that it behaves functionally as if it were an ACI build.) Thus the LCD part |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
54 of this D-Sample hardware only got exercised for the first time when I ran our |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
55 own Magnetite fw on it, and it exhibits some strange behaviour which I can only |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
56 attribute to a hardware problem. |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
57 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
58 The symptom is that the picture on the LCD sometimes appears garbled, and |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
59 whether or not this LCD garbling happens (and if it does happen, how severely) |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
60 appears to depend on the picture content. Furthermore, the dependency is not |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
61 only on the picture content, but seemingly also on some law of chance, as the |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
62 same picture can get garbled more or less severely at different times. Closer |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
63 examination of exactly how the picture is garbled reveals that the misbehaviour |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
64 appears to be some kind of double latching of write data inside the LCD module. |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
65 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
66 The R2D driver maintains a software framebuffer in the r2d_lcd_memory_words[] |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
67 array, and the r2d_refresh() function transfers the picture in this software |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
68 FB to the hardware FB inside the LCD module by sequentially writing 176*220 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
69 16-bit words into a fixed ARM7 memory address in the nCS3 range, causing a |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
70 write cycle to be issued to the LCD module for each pixel. When a garbled |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
71 picture appears on the physical LCD, the picture maintained by the software in |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
72 the r2d_lcd_memory_words[] array is correct (not garbled) as revealed by |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
73 reading that array memory out via ETM memory read commands (see the tools in |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
74 the freecalypso-ui-dev repository), and the picture on the physical LCD is |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
75 garbled in such a way that it appears that at some point when the firmware sent |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
76 a single pixel to it, the LCD module erroneously registered a double write, |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
77 incrementing the internal FB RAM pointer by two pixels instead of one, with all |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
78 subsequent pixels shifted accordingly. The picture can be garbled more or less |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
79 severely depending on how many pixels in the picture trigger this apparent |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
80 double write effect. |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
81 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
82 The end result is that even though we have a real TI-made D-Sample hardware kit, |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
83 its usefulness to us for FreeCalypso UI development is rather limited because |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
84 of both the lack of tpudrv10.c code resulting in no working GSM radio and the |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
85 apparent hardware problem with the LCD module in the handset part of the kit. |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
86 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
87 The Mother's plan is to design and build our own UI development board to take |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
88 the place of TI's D-Sample, combining the good version of the Calypso+Iota+Rita |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
89 chipset for which we have good fw support with a 176x220 pix color LCD of our |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
90 own - it is one of the industry standard sizes, so it should only be a matter |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
91 of getting a semi-custom one with the right interface (16-bit parallel) and the |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
92 right polarizer orientation (6 o'clock viewing direction). The proposed board |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
93 would be a derivative of our current FCDEV3B, keeping the core Calypso+RF block |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
94 (originally from Openmoko) completely unchanged, but adding the LCD, the keypad |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
95 buttons and other handset peripherals, resulting in a Handset Motherboard |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
96 Prototype - HSMBP. |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
97 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
98 Different Calypso silicon versions |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
99 ================================== |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
100 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
101 Because the D-Sample was a development board rather than a commercial end user |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
102 product, different D-Sample boards at different points in time had different |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
103 versions of the Calypso chip populated on them as the Calypso silicon itself |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
104 evolved. The board we got appears to be an early one, as it has Calypso chip |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
105 version F741979B on it (C05 rev B, DSP ROM version 3311), but I can only reason |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
106 that later D-Sample boards must have had Calypso C035 chips on them, either the |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
107 original Calypso C035 with DSP ROM version 3416 or the final silicon with DSP |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
108 ROM version 3606. |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
109 |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
110 Because we only have one D-Sample board and we have no idea whether or not there |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
111 are any other DS boards out there in the world (ours may well be the world's |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
112 last remaining unit), our current build system is set up to target only one |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
113 D-Sample version, the one we've got: CHIPSET=8, DSP=33 for Calypso C05 rev B |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
114 silicon. If anyone else in the world has another D-Sample board and it has a |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
115 different Calypso chip version on it, if you would like to run our FC Magnetite |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
116 firmware on it, you will need to edit the targets/dsample.conf source file |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
117 (it's a Bourne shell script fragment sourced by configure.sh) and set the |
4d4f0bba9469
doc/D-Sample written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
118 CHIPSET and DSP settings correctly for your Calypso chip version. |