annotate doc/C139-Howto @ 309:a05a9e88976f

configure.sh: better comment
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 02 Nov 2017 06:59:21 +0000
parents e2dce971aec9
children
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
95
48792a467305 doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents: 94
diff changeset
1 Running FreeCalypso firmware on the Motorola C139
48792a467305 doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents: 94
diff changeset
2 =================================================
94
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
3
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
4 Mot C139 phones are brickable - because the Calypso boot ROM is disabled by PCB
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5 wiring, the ability to reflash a phone with new firmware critically depends on
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6 there being a particular kind of boot code in flash sector 0 at all times - a
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7 particular kind of boot code that allows the boot process to be interrupted and
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8 diverted to external code loaded via the headset jack serial port.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 The FreeCalypso project has adopted one specific version of the flash sector 0
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
11 boot code (produced by applying a binary patch to one of Compal/Motorola's
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
12 original versions) for use with all of our firmwares for this target. No matter
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
13 which FreeCalypso firmware you are running - Citrine, Magnetite or tcs211-c139 -
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
14 you flash your FC fw image at offset 0x10000 while keeping this boilerplate boot
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
15 code at the beginning of the flash:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
16
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
17 ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/compal-flash-boot-for-fc.bin
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
18
221
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
19 We are currently able to produce two kinds of firmware builds for the C139:
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
20 pseudo-modem or UI demo. The pseudo-modem configuration is intended for those
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
21 who would really like to play with AT-command-controlled modem firmware on some
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
22 proper Calypso modem hardware like our desired FCDEV3B, but who are using a
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
23 C139 instead out of poverty - a poor man's substitute for proper modem hardware.
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
24 In this configuration the C139 phone's LCD stays dark, the buttons do nothing,
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
25 but the firmware presents TI's RVTMUX interface with FreeCalypso extensions on
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
26 the headset jack serial port. You connect to this serial interface with
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
27 FreeCalypso host utility rvinterf, and use another FC host utility fc-shell to
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
28 talk AT commands to the pseudo-modem.
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
29
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
30 If you flash a C139 phone with one of our pseudo-modem firmware builds, it will
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
31 behave in some odd ways which you might not expect:
94
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
32
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
33 * Whenever the phone is off but the battery is inserted, even a momentary
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
34 accidental press of the power button will launch a full power-on and firmware
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
35 boot - without any visible indication whatsoever as the LCD stays dark!
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
36
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
37 * Once the firmware has booted from a press of the power button - even a
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
38 momentary accidental press - there is no way to make it shut down and power
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
39 off except by sending a power-off command via the headset jack serial port.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
40 So it will just keep running until the battery runs down, once again with the
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
41 LCD dark and no visible indication of any kind that it's on.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
42
221
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
43 In the UI demo configuration (see Handset-configs) the FC-reflashed C139 acts
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
44 *almost* like an end user phone: it can be operated from the keypad without
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
45 being connected to a PC with a serial cable, there is a very rudimentary UI
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
46 presented on the LCD, the phone can be turned on and off with the power button.
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
47 However, battery charging doesn't work, there is not even a working battery
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
48 gauge, and the UI is full of serious bugs. Thus this fw configuration is
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
49 intended as a DEMO, not something to be inflicted on an actual end user!
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
50
94
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
51 Additional considerations are:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
52
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
53 * Flashing a given phone back and forth between FreeCalypso and Mot/Compal's
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
54 official firmware is a royal pita, so if you are going to play with
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
55 FreeCalypso on a C139, it would be the easiest to dedicate a phone
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
56 specifically for FC experiments;
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
57
221
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
58 * We haven't got firmware-controlled battery charging working yet in any of our
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
59 fw configurations, so you will need another phone running one of the official
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
60 fw versions to charge batteries.
94
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
61
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
62 Converting a phone to FreeCalypso
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
63 =================================
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
64
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
65 Start by installing FreeCalypso host tools on your PC/laptop or whatever host
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
66 you will use to talk to C139 phones, if you haven't already. If you are
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
67 starting with an unhacked C139 phone running one of the official firmware
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
68 versions, the procedure for flashing and bringing up FreeCalypso for the first
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
69 time is as follows:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
70
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
71 * Note down your phone's factory IMEI. After you get FreeCalypso firmware
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
72 flashed and running, you will need to set your own IMEISV, as our fw doesn't
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
73 know how to grok Mot/Compal's flash data structures where they store theirs.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
74 You can set whatever IMEISV you like, but if you would like to keep the
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
75 factory one, it would be the easiest to have it noted down on a piece of
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
76 paper. If you have a labelmaker, you can print a sticky label with the IMEI
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
77 and stick it on the side of the phone where you can easily see it later while
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
78 playing with FreeCalypso.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
79
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
80 * Get in with fc-loadtool, preceded with tfc139 if necessary - see FC host tools
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
81 documentation.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
82
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
83 * Once you are in with fc-loadtool, i.e., at the loadtool> prompt, reflash the
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
84 boot sector with the FreeCalypso version:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
85
221
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
86 loadtool> flash erase-program-boot compal-flash-boot-for-fc.bin
94
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
87
95
48792a467305 doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents: 94
diff changeset
88 * Flash whichever FreeCalypso firmware image you would like to play with, e.g.:
94
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
89
221
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
90 loadtool> flash erase 0x10000 0x230000
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
91 loadtool> flash program-bin 0x10000 fwimage.bin
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
92
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
93 Please note that the image size will be different depending on which
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
94 configuration of which FC fw project you would like to play with, so adjust
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
95 the second number in the flash erase command accordingly - it needs to be
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
96 the fw image size rounded up to a 64 KiB sector boundary.
94
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
97
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
98 * Erase the flash sectors to be used for the FFS (flash file system) by
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
99 FreeCalypso firmwares:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
100
221
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
101 loadtool> flash erase 0x3C0000 0x30000
94
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
102
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
103 * Exiting fc-loadtool cleanly will cause it to power off the phone:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
104
221
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
105 loadtool> exit
94
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
106
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
107 Reflashing between different FreeCalypso firmwares
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
108 ==================================================
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
109
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
110 By the conventions established in the FreeCalypso project, all of our firmwares
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
111 for the C139 target have the following in common:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
112
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
113 * They all stay out of the boot sector and expect to receive control from the
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
114 boot code in the same manner (boot entry point at 0x10058, exception vectors
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
115 at 0x10000), thus there is no need to reflash the dangerous boot sector when
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
116 going from one FC firmware to another.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
117
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
118 * They all use the same aftermarket FFS configuration of 3 sectors of 64 KiB
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
119 each (64x3) at 0x3C0000. This FFS location is deliberately different from
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
120 the one used by Mot/Compal's firmwares, eliminating the possibility of one fw
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
121 trying to use the FFS created by the other, and by putting our FFS toward the
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
122 end of the flash we maximize the amount of flash space available for our
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
123 firmware code images. But even though we don't share our FFS with
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
124 Mot/Compal's official firmwares, we do share the same FFS between all of
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
125 FreeCalypso firmware projects - thus once you have initialized your FFS (see
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
126 below) with one FC firmware version, it will work with the others as well.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
127
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
128 If you need to reflash your C139 from one FC firmware version to another,
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
129 simply get in with fc-loadtool -h compal (no more need for the inefficient
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
130 -c 1003 or -c 1004 options or for tfc139) and reflash just the fw image part:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
131
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
132 loadtool> flash erase 0x10000 0x230000
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
133 loadtool> flash program-bin 0x10000 fwimage.bin
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
134
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
135 First boot of the firmware
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
136 ==========================
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
137
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
138 Connect the serial cable, but instead of running fc-loadtool, run rvinterf.
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
139 Press the red power button on the phone briefly just like you would for
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
140 fc-loadtool entry. Because there is no fc-loadtool running on the host end of
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
141 the serial cable, the boot path will *not* be diverted in the bootloader, and
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
142 the main fw image will run - and this time it will be the FreeCalypso firmware
221
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
143 you have compiled and flashed. If the fw you have flashed is the UI demo
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
144 configuration, the phone must have *NO* SIM in it the first time you boot it.
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
145 UI-enabled fw configuration automatically bring up the GSM radio and try to
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
146 connect to the default network on boot if there is a SIM present, and you don't
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
147 want your firmware trying to connect to a real live GSM network when you haven't
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
148 initialized your FFS yet. If the fw you have flashed is one of the AT-command-
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
149 controlled pseudo-modem configurations, then you don't need to worry if the SIM
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
150 is there or not on your first boot - just don't command it to connect to a
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
151 network until you have initialized the FFS.
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
152
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
153 If you have flashed a non-UI firmware version, the phone's LCD will remain dark
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
154 as there is no LCD driver code in this firmware, but you will see trace output
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
155 in the rvinterf window, telling you that the fw is running.
94
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
156
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
157 Before you do anything else, you will need to run fc-fsio and initialize the
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
158 aftermarket FFS for our firmware:
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
159
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
160 fsio> format /
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
161 fsio> mk-std-dirs
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
162 fsio> set-imeisv fc XXXXXXXX-YYYYYY-ZZ (punctuation optional, place anywhere)
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
163 fsio> set-rfcap dual-eu (if you have 900+1800 MHz hardware)
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
164 or
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
165 fsio> set-rfcap dual-us (if you have 850+1900 MHz hardware)
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
166
221
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
167 After you've initialized your FFS as above, you should exit fc-fsio, and your
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
168 next steps will depend on which fw configuration you are playing with. If it's
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
169 the sans-UI pseudo-modem configuration, run fc-shell and try some AT commands:
94
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
170
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
171 AT+CMEE=2 -- enable verbose error responses
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
172 AT+CFUN=1 -- enable radio and SIM interfaces
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
173 AT+COPS=0 -- register to the default GSM network
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
174
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
175 When you are done, you can power the phone off by sending a 'poweroff' command
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
176 through fc-shell. The only other way is to yank the battery, and doing the
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
177 latter is recommended anyway: when a phone with the present hack-firmware
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
178 flashed into it is powered off but still has the battery inserted, even a
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
179 momentary accidental press of the power button will cause it to power on and
596d86109e44 initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
180 boot, but there will be absolutely no visual indication, as the LCD stays dark.
95
48792a467305 doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents: 94
diff changeset
181
221
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
182 If you are playing with the UI demo firmware, after you have initialized your
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
183 FFS, you can power the phone off with the power button, insert a SIM, power it
e2dce971aec9 doc/C139-Howto: update for the current status
Mychaela Falconia <falcon@freecalypso.org>
parents: 95
diff changeset
184 back on and play with the primitive UI.