FreeCalypso > hg > fc-magnetite
annotate doc/C1xx-Howto @ 547:c3f2f79dc5b8
l1_rf12.c compiled-in default RF band tables: a round of cleanup
* Uncalibrated default g_magic values changed from old Clara RF numbers
(yes, Clara, not even Leonardo) to the approximately correct value
for our current hw;
* Uncalibrated default Rx and Tx channel calibration tables providing
neutral correction values: fixed bogus ARFCNs from blind copy-n-paste
between different bands;
* Restored #if (ORDER2_TX_TEMP_CAL==1) in the Tx temperature compensation
tables;
* Fully rewrote the big comment before these rf_XXX structures to reflect
the current situation.
This change is part of the larger transition in FreeCalypso from reverse
to forward engineering, from reconstruction of lost original bits to
ongoing forward development and maintenance.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 17 Nov 2018 19:57:34 +0000 |
parents | 4f378f6c5efa |
children | 9327935d8549 |
rev | line source |
---|---|
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 Running FreeCalypso firmware on Motorola C1xx phones |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 ==================================================== |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 Before we begin, it needs to be noted that running FreeCalypso fw on a C1xx |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 phone is very much akin to xenotransplantation: Mot C1xx hardware is an alien |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 to our FreeCalypso family (our native hw targets are those made by TI, Openmoko |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
7 and us, not Motorola or Compal), and our non-Compal-based, non-Mot-based |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
8 FreeCalypso fw is equally alien to the C1xx phones. The xenotransplantation |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
9 procedure of converting a C1xx phone to FreeCalypso is highly unnatural, and |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 involves a large number of cumbersome manual steps - you've been warned. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
11 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
12 Preparing the host system |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
13 ========================= |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
14 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
15 Firmware flashing on Mot C1xx phones is accomplished through the headset jack |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
16 via a special cable. There is no need to disassemble the phone in any way or |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
17 to do any soldering or other hardware surgery, but you will need a host system |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
18 to run the multitude of special software tools that are involved in the |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
19 procedure. You will need to begin by installing FreeCalypso host tools: the |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
20 current version of our FC-to-C1xx xenotransplantation procedure for the lower |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
21 C1xx subfamilies (the additions from the previous version are RF calibration |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
22 data migration and battery charging configuration) requires fc-host-tools-r8 or |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
23 later, or if you are working on a C155 or C156 phone, you will need our very |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
24 latest fc-host-tools-r9a release: |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
26 ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/fc-host-tools-r9a.tar.bz2 |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
27 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
28 You will also need our battery charging configuration files: |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
29 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
30 https://bitbucket.org/falconian/fc-battery-conf |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
31 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
32 Run 'make install' in the fc-battery-conf tree to add the battery charging |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
33 configuration files to your FC host tools installation under /opt/freecalypso. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
34 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
35 Flash backup and data gathering |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
36 =============================== |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
37 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
38 Before you begin the actual conversion of your C1xx phone to FreeCalypso, you |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
39 will need to gather the following pieces of information: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
40 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
41 * The phone's IMEI - we don't know how to extract it out of Mot/Compal's non-TI |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
42 flash data structures, so you will have to reset it manually after the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
43 firmware change. Of course you can set your "new" FreeCalypso IMEI to |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
44 whatever you feel like, but if you wish to keep the original factory-assigned |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
45 one, you will need to note it down manually, either from the sticker inside |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
46 the battery compartment (*very* hard to read!) or by booting the phone up |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
47 with its original fw prior to the conversion, entering *#06# and reading it |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
48 from the display. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
49 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
50 * Your specific phone's factory RF calibration values: you will need to make a |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
51 dump of your phone's flash memory (also serves as a backup, always a good |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
52 thing to have) with fc-loadtool and extract the numbers of interest with our |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
53 c1xx-calextr utility, which is part of the new FC host tools. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
54 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
55 * You need to know whether your phone has 900+1800 MHz or 850+1900 MHz bands - |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
56 you will need to communicate this information to the new fw after the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
57 conversion. To the best of our knowledge, all C11x/12x and C140 phones have |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
58 900+1800 MHz bands, but C139 phones have been made in both versions. On the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
59 phones that have passed through our hands so far, the first two digits of the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
60 IMEI have been 35 on 900+1800 MHz phones and 01 on 850+1900 MHz ones. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
61 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
62 * For the lower C1xx subfamilies only: you need to know whether your phone has |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
63 2 MiB or 4 MiB flash. To the best of our knowledge, all C139/140 phones have |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
64 4 MiB flash, but C11x have been seen with both 2 MiB and 4 MiB flashes. The |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
65 flash memory size will be autodetected by fc-loadtool as part of making the |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
66 flash dump. C155 and C156 phones have 8 MiB flash. |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
67 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
68 The Mother's method for keeping track of these per-phone bits of information is |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
69 to create a separate directory for each phone with the IMEI as the directory |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
70 name; the flash dump and the RF calibration bits extracted from it will then |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
71 reside in that directory, while the IMEI is in the name of the directory itself. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
72 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
73 Once you have created your per-phone directory and cd'ed into it, you are ready |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
74 to run fc-loadtool to capture the flash dump. The phone needs to be off, but |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
75 the battery needs to be present and have some charge in it; with the phone off, |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
76 connect the serial cable between your host computer and the phone's headset |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
77 jack, and run fc-loadtool as follows: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
78 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
79 C11x/12x: fc-loadtool -h compal /dev/ttyXXX |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
80 C139/140: fc-loadtool -h compal -c 1004 /dev/ttyXXX |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
81 C155/156: fc-loadtool -h c155 /dev/ttyXXX |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
82 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
83 Change /dev/ttyXXX to the serial or USB-serial device corresponding to your |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
84 serial cable. With the serial cable connected, the phone in the powered-off |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
85 state and the fc-loadtool process running and waiting for the phone, press the |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
86 red power button on the phone - a momentary press is sufficient and recommended. |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
87 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
88 Once the phone boots the loadagent code fed to it serially by fc-loadtool and |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
89 you land at the loadtool> prompt, issue the following command: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
90 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
91 flash dump2bin flashdump.bin |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
92 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
93 Given this command, fc-loadtool will autodetect whether your phone has 2 MiB or |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
94 4 MiB flash (for the lower C1xx subfamilies), then make a dump of the complete |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
95 content of this flash memory and save it in a file named flashdump.bin in the |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
96 current directory. When this operation completes, exit the loadtool session |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
97 with the exit command - it will also cleanly power the phone off. |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
98 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
99 The next step is to extract the RF calibration values. Run a command of the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
100 following form: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
101 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
102 c1xx-calextr -b rfbin flashdump.bin <offset> |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
103 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
104 For the lower C1xx subfamilies, change <offset> to 0x1FC000 if your phone has |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
105 2 MiB flash (the size of flashdump.bin is 2097152 bytes) or 0x3FC000 if it has |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
106 4 MiB flash (the size of flashdump.bin is 4194304 bytes). For C155/156 the |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
107 correct offset is 0x7E0000. The stdout scribbles from c1xx-calextr will |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
108 indicate which per-band calibration records it finds (from which you can tell |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
109 if the phone has 900+1800 MHz or 850+1900 MHz bands if you didn't have this |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
110 knowledge already), and a directory named rfbin will be created, containing the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
111 correct subtree of directories and files which will need to be uploaded into |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
112 the new FreeCalypso flash file system (FFS) under /gsm/rf after the firmware |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
113 change. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
114 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
115 Selecting and building the desired firmware config |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
116 ================================================== |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
117 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
118 There is only one FC Magnetite firmware configuration for C11x/12x phones, but |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
119 for the better C139/140 phones (or for C155/156) there are several to choose |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
120 from. The following two configs are the currently recommended ones: |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
121 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
122 hybrid-vpm This config is available for all 3 C1xx subfamilies, although |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
123 the actual fw images are different for each. In this |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
124 configuration the converted phone acts not as an end user phone, |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
125 but as a voice pseudo-modem that needs to be controlled by a |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
126 host computer via a serial cable to do anything interesting. |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
127 See the Voice-pseudo-modem article for more information. |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
128 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
129 hybrid-ui-vo This config is available only for the C139/140 target, not for |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
130 the other two. This configuration includes the UI layers, thus |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
131 when a C139/140 phone runs this firmware, it is able to function |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
132 as an untethered phone without a host computer connection. |
457
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
133 However, please be warned that this proof-of-concept UI is |
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
134 nowhere close to being practically usable - see the |
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
135 Handset-goal article for more info. |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
136 |
457
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
137 Both of the above are hybrid configurations in that they use the new TCS3 |
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
138 versions of the G23M protocol stack and ACI (Application Control Interface) |
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
139 firmware components grafted on top of the TCS211 chipsetsw foundation, resulting |
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
140 in a fully built-from-source configuration without major blob components. The |
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
141 UI layers BMI and MFW in the UI-enabled hybrid-ui-vo config also come from the |
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
142 new TCS3 source, not the old version of unknown origin. They are "voice only" |
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
143 configs in that CSD, fax and GPRS functions are disabled - these functions |
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
144 cannot be made use of on Mot C1xx phones, and disabling them significantly |
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
145 reduces the weight of the firmware. |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
146 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
147 For the C139 and C155 targets (but not for C11x/12x), it is also possible to |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
148 build some of the older configs that use the old binary blob version of the |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
149 G23M PS component and the corresponding old versions of ACI, MFW and BMI on top |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
150 of it - however, those configuration are now officially deprecated except for |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
151 only two remaining use cases which do not apply to Mot C1xx targets, hence they |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
152 are no longer supported officially. |
457
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
153 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
154 Thus we have a total of 4 possible build configurations, one for the C11x/12x |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
155 target, 2 for C139/140 and 1 for C155/156: |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
156 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
157 ./configure.sh c11x hybrid-vpm |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
158 ./configure.sh c139 hybrid-vpm |
457
6530fc550836
doc/C1xx-Howto: update for fc-host-tools-r8 and hybrid-ui-vo
Mychaela Falconia <falcon@freecalypso.org>
parents:
383
diff
changeset
|
159 ./configure.sh c139 hybrid-ui-vo |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
160 ./configure.sh c155 hybrid-vpm |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
161 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
162 See the Compiling article for more information on how to compile your own |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
163 firmware image in one of the above configurations. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
164 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
165 Bootloader change on the lower C1xx subfamilies |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
166 =============================================== |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
167 |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
168 This section applies ONLY to C11x/12x and C139/140 subfamilies; it does NOT |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
169 apply to the C155/156 subfamily. |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
170 |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
171 If this is your first time converting a given lower-C1xx phone from its original |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
172 firmware to FreeCalypso (as opposed to updating from an earlier FC firmware |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
173 version), you will also need the compal-flash-boot-for-fc.bin bootloader image |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
174 in addition to the main fw image you just built: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
175 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
176 ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/compal-flash-boot-for-fc.bin |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
177 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
178 Mot C1xx phones are brickable - because the Calypso boot ROM is disabled by PCB |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
179 wiring, the ability to reflash a phone with new firmware critically depends on |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
180 there being a particular kind of boot code in flash sector 0 at all times - a |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
181 particular kind of boot code that allows the boot process to be interrupted and |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
182 diverted to external code loaded via the headset jack serial port. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
183 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
184 The FreeCalypso family of projects has adopted one specific version of the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
185 flash sector 0 boot code (produced by applying a binary patch to one of |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
186 Compal/Motorola's original versions) for use with all of our firmwares for |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
187 these phones. We use the same FC-C1xx bootloader on both C11x/12x and C139/140 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
188 phones: the official bootloader versions are different between the two (and |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
189 moreover, each particular official fw version comes with its own bootloader |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
190 version), but the simpler bootloader version which we took from one particular |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
191 C11x fw version works perfectly well on the C139 as well, hence we've adopted |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
192 it for all combinations. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
193 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
194 Once you have our compal-flash-boot-for-fc.bin image flashed in sector 0, you |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
195 can then flash whichever FC firmware image you like at offset 0x10000 without |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
196 having to touch the dangerous boot sector. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
197 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
198 On C155/156 phones the situation is a little different: they are also brickable |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
199 with the Calypso boot ROM disabled, but Motorola's original bootloader on these |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
200 phones is significantly different from the one on the lower C1xx subfamilies, |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
201 and they use a different flash layout: the bootloader in the first 8 KiB sector, |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
202 unused flash space between 0x2000 and 0x20000, and the main fw image starting |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
203 at 0x20000. Our FC firmwares for the C155/156 target are built to be flashed |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
204 at 0x20000 just like Mot's official ones, and they are designed to receive |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
205 control from Mot's original bootloader on this target. |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
206 |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
207 Converting the phone to FreeCalypso fw |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
208 ====================================== |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
209 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
210 If you are starting with an unhacked C1xx phone running one of the official |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
211 firmware versions, the procedure for flashing and bringing up FreeCalypso for |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
212 the first time is as follows - *after* you have done all of the preparatory |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
213 steps described in the preceding sections: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
214 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
215 * Have your phone's battery fully charged - although you will regain the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
216 ability to charge it with FreeCalypso fw when the conversion is fully |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
217 complete (not just the flashing part, but also the subsequent FFS |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
218 initialization), your phone will not have this charging ability while you are |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
219 in the middle of the xenotransplantation procedure. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
220 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
221 * Get in with fc-loadtool just like you did when you made the dump of your |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
222 phone's flash memory for backup and RF calibration data extraction. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
223 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
224 * If you are operating on a C11x/12x or C139/140 phone, reflash the boot sector |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
225 with our FreeCalypso version: |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
226 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
227 loadtool> flash erase-program-boot compal-flash-boot-for-fc.bin |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
228 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
229 DO NOT flash compal-flash-boot-for-fc.bin into C155/156 phones, it is ONLY |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
230 for the lower C1xx subfamilies! |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
231 |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
232 * To flash whichever FreeCalypso firmware image you would like to play with, |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
233 execute the flashing script which the fw build system produced along with the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
234 actual image: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
235 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
236 loadtool> exec flash-script |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
237 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
238 * Erase the flash sectors to be used for the FFS (flash file system) by |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
239 FreeCalypso firmwares; the specific command depends on whether your phone has |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
240 2 MiB, 4 MiB or 8 MiB flash. On 2 MiB flash phones: |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
241 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
242 loadtool> flash erase 0x1C0000 0x30000 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
243 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
244 Or on 4 MiB flash phones: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
245 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
246 loadtool> flash erase 0x3C0000 0x30000 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
247 |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
248 Or on 8 MiB flash C155/156 phones: |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
249 |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
250 loadtool> flash erase 0x700000 0xD0000 |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
251 |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
252 * Exiting fc-loadtool cleanly will cause it to power off the phone: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
253 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
254 loadtool> exit |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
255 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
256 Reflashing between different FreeCalypso firmwares |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
257 ================================================== |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
258 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
259 By the conventions established in the FreeCalypso family of projects, all of |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
260 our firmwares for C11x and C139 targets have the following in common: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
261 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
262 * They all stay out of the boot sector and expect to receive control from the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
263 boot code in the same manner (boot entry point at 0x10058, exception vectors |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
264 at 0x10000), thus there is no need to reflash the dangerous boot sector when |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
265 going from one FC firmware to another. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
266 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
267 * They all use the same aftermarket FFS configuration of 3 sectors of 64 KiB |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
268 each (64x3) at 0x3C0000 on 4 MiB flash phones, or at 0x1C0000 on 2 MiB flash |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
269 phones. This FFS location is deliberately different from the one used by |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
270 Mot/Compal's firmwares, eliminating the possibility of one fw trying to use |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
271 the FFS created by the other, and by putting our FFS toward the end of the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
272 flash we maximize the amount of flash space available for our firmware code |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
273 images. But even though we don't share our FFS with Mot/Compal's official |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
274 firmwares, we do share the same FFS between all of FreeCalypso firmware |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
275 projects - thus once you have initialized your FFS (see below) with one FC |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
276 firmware version, it will work with the others as well. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
277 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
278 If you need to reflash your C1xx phone from one FC firmware version to another, |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
279 simply get in with fc-loadtool -h compal (no more need for the inefficient |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
280 -c 1003 or -c 1004 options or for tfc139) and reflash just the fw image part: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
281 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
282 loadtool> exec flash-script |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
283 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
284 First boot of the firmware |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
285 ========================== |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
286 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
287 Connect the serial cable, but instead of running fc-loadtool, run rvinterf. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
288 Press the red power button on the phone briefly just like you would for |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
289 fc-loadtool entry. Because there is no fc-loadtool running on the host end of |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
290 the serial cable, the boot path will *not* be diverted in the bootloader, and |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
291 the main fw image will run - and this time it will be the FreeCalypso firmware |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
292 you have compiled and flashed. If the fw you have flashed is the UI demo |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
293 configuration, the phone must have *NO* SIM in it the first time you boot it. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
294 UI-enabled fw configurations automatically bring up the GSM radio and try to |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
295 connect to the default network on boot if there is a SIM present, and you don't |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
296 want your firmware trying to connect to a real live GSM network when you haven't |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
297 initialized your FFS yet. If the fw you have flashed is one of the AT-command- |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
298 controlled pseudo-modem configurations, then you don't need to worry if the SIM |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
299 is there or not on your first boot - just don't command it to connect to a |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
300 network until you have initialized the FFS. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
301 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
302 If you have flashed a non-UI firmware version, the phone's LCD will remain dark |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
303 as there is no LCD driver code in this firmware, but you will see trace output |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
304 in the rvinterf window, telling you that the fw is running. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
305 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
306 Before you do anything else, you will need to run fc-fsio and initialize the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
307 aftermarket FFS for our firmware: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
308 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
309 fsio> format / |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
310 fsio> mk-std-dirs |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
311 fsio> set-imeisv fc XXXXXXXX-YYYYYY-ZZ (punctuation optional, place anywhere) |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
312 fsio> set-rfcap dual-eu (if you have 900+1800 MHz hardware) |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
313 or |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
314 fsio> set-rfcap dual-us (if you have 850+1900 MHz hardware) |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
315 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
316 then additionally: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
317 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
318 fsio> upload-subtree rfbin /gsm/rf |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
319 fsio> write-charging-config /opt/freecalypso/charging/c1xx/standard |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
320 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
321 The last two commands are new with the 2018-01 revision of the FC-to-C1xx |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
322 xenotransplantation procedure. The upload-subtree command uploads the RF |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
323 calibration values which you had extracted earlier with c1xx-calextr (the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
324 instructions assume that you are running from the same directory where the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
325 rfbin directory subtree had been created earlier), and this step is necessary |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
326 in order for your phone to continue to transmit at the correct power levels |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
327 after the conversion. The write-charging-config command uploads the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
328 configuration settings for the FCHG battery charging driver, without which it |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
329 cannot charge the battery; you must have the charging config files from the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
330 fc-battery-conf tree installed under /opt/freecalypso in order for this command |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
331 to work as given. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
332 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
333 It needs to be noted that the battery charging config settings uploaded with |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
334 fc-fsio write-charging-config take effect only on the next boot cycle of the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
335 firmware, i.e., until the next reboot after the write-charging-config operation, |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
336 the firmware won't charge the battery even if there is a charging power source |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
337 plugged in. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
338 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
339 After you've initialized your FFS as above, you should exit fc-fsio, and your |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
340 next steps will depend on which fw configuration you are playing with. If it's |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
341 the sans-UI pseudo-modem configuration, run fc-shell and try some AT commands: |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
342 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
343 AT+CMEE=2 -- enable verbose error responses |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
344 AT+CFUN=1 -- enable radio and SIM interfaces |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
345 AT+COPS=0 -- register to the default GSM network |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
346 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
347 When you are done, you can power the phone off by sending a 'poweroff' command |
543
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
348 through fc-shell, or you can kill rvinterf or unplug the serial cable and wait |
4f378f6c5efa
doc/C1xx-Howto: C155 support
Mychaela Falconia <falcon@freecalypso.org>
parents:
539
diff
changeset
|
349 for the firmware to power off by the keepalive timeout after some 15 to 20 s. |
383
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
350 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
351 If you are playing with the UI demo firmware, after you have initialized your |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
352 FFS, you can power the phone off with the power button, insert a SIM, power it |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
353 back on and play with the primitive UI. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
354 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
355 Updating from previous versions |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
356 =============================== |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
357 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
358 If you had previously initialized your aftermarket FFS using an earlier version |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
359 of these instructions, before we added the RF calibration and charging config |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
360 upload steps, you need to add these bits to your FFS. Update to the latest FC |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
361 host tools, extract the factory RF calibration values from a dump of your |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
362 phone's flash with c1xx-calextr, add the battery charging config files to your |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
363 /opt/freecalypso installation, boot the phone with rvinterf, get in with fc-fsio |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
364 and run the last two upload-subtree and write-charging-config commands as above. |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
365 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
366 Recalibration |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
367 ============= |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
368 |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
369 In the interest of completeness, it needs to be noted that extracting Motorola's |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
370 original factory RF calibration values and reusing them for FreeCalypso is not |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
371 the only way: the other alternative is to perform a fresh calibration using a |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
372 Rohde&Schwarz CMU200 RF test machine and FreeCalypso RF calibration software |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
373 (fc-rfcal-tools). This approach will yield superior results, but the |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
374 requirement of having a CMU200 instrument which is itself properly calibrated |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
375 and a cabling setup with the right adapters whose insertion loss at particular |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
376 GSM frequencies is precisely known makes this approach feasible only for |
43dbedde9d80
doc/C1xx-Howto written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
377 professional FreeCalypso service shops, not for ordinary individual users. |