FreeCalypso > hg > fc-magnetite
annotate targets/pirelli.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 4a8dacbe9187 |
children |
rev | line source |
---|---|
89
6c3881378a31
targets: c139 and pirelli added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 #define CONFIG_TARGET_PIRELLI 1 |
627
4a8dacbe9187
targets/*.h: #define GPIO1_SPEAKER_CTRL to 0 or 1 as appropriate
Mychaela Falconia <falcon@freecalypso.org>
parents:
89
diff
changeset
|
2 #define GPIO1_SPEAKER_CTRL 0 |
89
6c3881378a31
targets: c139 and pirelli added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 #define UARTFAX_CLASSIC_DTR_DCD 0 |