FreeCalypso > hg > fc-magnetite
annotate targets/tangomdm.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | targets/leonardo.h@b639f7ab0007 |
children | 34f27d5f5393 |
rev | line source |
---|---|
632
d968a3216ba0
new tangomdm build target
Mychaela Falconia <falcon@freecalypso.org>
parents:
630
diff
changeset
|
1 #define CONFIG_TARGET_TANGO 1 |
d968a3216ba0
new tangomdm build target
Mychaela Falconia <falcon@freecalypso.org>
parents:
630
diff
changeset
|
2 #define CONFIG_MCSI_MODEM 1 |
d968a3216ba0
new tangomdm build target
Mychaela Falconia <falcon@freecalypso.org>
parents:
630
diff
changeset
|
3 #define CONFIG_GPIO1_HIGH 1 |
d968a3216ba0
new tangomdm build target
Mychaela Falconia <falcon@freecalypso.org>
parents:
630
diff
changeset
|
4 #define GPIO1_SPEAKER_CTRL 0 |
630
b639f7ab0007
Leonardo GPIO 2 fix
Mychaela Falconia <falcon@freecalypso.org>
parents:
627
diff
changeset
|
5 #define UARTFAX_CLASSIC_DTR_DCD 0 |