FreeCalypso > hg > fc-magnetite
annotate doc/C139-Howto @ 115:e0cf9a040fef
scripts/mkcomp-test.sh: allow MMI setting to be overridden
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 06 Oct 2016 17:31:24 +0000 |
parents | 48792a467305 |
children | e2dce971aec9 |
rev | line source |
---|---|
95
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
1 Running FreeCalypso firmware on the Motorola C139 |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
2 ================================================= |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 Mot C139 phones are brickable - because the Calypso boot ROM is disabled by PCB |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 wiring, the ability to reflash a phone with new firmware critically depends on |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 there being a particular kind of boot code in flash sector 0 at all times - a |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
7 particular kind of boot code that allows the boot process to be interrupted and |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
8 diverted to external code loaded via the headset jack serial port. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
9 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 The FreeCalypso project has adopted one specific version of the flash sector 0 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
11 boot code (produced by applying a binary patch to one of Compal/Motorola's |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
12 original versions) for use with all of our firmwares for this target. No matter |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
13 which FreeCalypso firmware you are running - Citrine, Magnetite or tcs211-c139 - |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
14 you flash your FC fw image at offset 0x10000 while keeping this boilerplate boot |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
15 code at the beginning of the flash: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
16 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
17 ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/compal-flash-boot-for-fc.bin |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
18 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
19 Because neither FC Citrine nor FC Magnetite implements any phone UI or puts |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
20 anything at all on the LCD, when a C139 phone is flashed with one of our |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
21 firmwares, it will behave very oddly: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
22 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
23 * Whenever the phone is off but the battery is inserted, even a momentary |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
24 accidental press of the power button will launch a full power-on and firmware |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 boot - without any visible indication whatsoever as the LCD stays dark! |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
26 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
27 * Once the firmware has booted from a press of the power button - even a |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
28 momentary accidental press - there is no way to make it shut down and power |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
29 off except by sending a power-off command via the headset jack serial port. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
30 So it will just keep running until the battery runs down, once again with the |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
31 LCD dark and no visible indication of any kind that it's on. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
32 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
33 Additional considerations are: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
34 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
35 * Flashing a given phone back and forth between FreeCalypso and Mot/Compal's |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
36 official firmware is a royal pita, so if you are going to play with |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
37 FreeCalypso on a C139, it would be the easiest to dedicate a phone |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
38 specifically for FC experiments; |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
39 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
40 * We haven't got firmware-controlled battery charging working yet, so you will |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
41 need another phone running one of the official fw versions to charge |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
42 batteries. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
43 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
44 Converting a phone to FreeCalypso |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
45 ================================= |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
46 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
47 Start by installing FreeCalypso host tools on your PC/laptop or whatever host |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
48 you will use to talk to C139 phones, if you haven't already. If you are |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
49 starting with an unhacked C139 phone running one of the official firmware |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
50 versions, the procedure for flashing and bringing up FreeCalypso for the first |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
51 time is as follows: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
52 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
53 * Note down your phone's factory IMEI. After you get FreeCalypso firmware |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
54 flashed and running, you will need to set your own IMEISV, as our fw doesn't |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
55 know how to grok Mot/Compal's flash data structures where they store theirs. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
56 You can set whatever IMEISV you like, but if you would like to keep the |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
57 factory one, it would be the easiest to have it noted down on a piece of |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
58 paper. If you have a labelmaker, you can print a sticky label with the IMEI |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
59 and stick it on the side of the phone where you can easily see it later while |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
60 playing with FreeCalypso. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
61 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
62 * Get in with fc-loadtool, preceded with tfc139 if necessary - see FC host tools |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
63 documentation. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
64 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
65 * Once you are in with fc-loadtool, i.e., at the loadtool> prompt, reflash the |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
66 boot sector with the FreeCalypso version: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
67 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
68 loadtool> flash erase-program-boot compal-flash-boot-for-fc.bin |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
69 |
95
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
70 * Flash whichever FreeCalypso firmware image you would like to play with, e.g.: |
94
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
71 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
72 loadtool> flash erase 0x10000 0x230000 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
73 loadtool> flash program-bin 0x10000 fwimage.bin |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
74 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
75 * Erase the flash sectors to be used for the FFS (flash file system) by |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
76 FreeCalypso firmwares: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
77 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
78 loadtool> flash erase 0x3C0000 0x30000 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
79 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
80 * Exiting fc-loadtool cleanly will cause it to power off the phone: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
81 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
82 loadtool> exit |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
83 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
84 Reflashing between different FreeCalypso firmwares |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
85 ================================================== |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
86 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
87 By the conventions established in the FreeCalypso project, all of our firmwares |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
88 for the C139 target have the following in common: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
89 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
90 * They all stay out of the boot sector and expect to receive control from the |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
91 boot code in the same manner (boot entry point at 0x10058, exception vectors |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
92 at 0x10000), thus there is no need to reflash the dangerous boot sector when |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
93 going from one FC firmware to another. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
94 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
95 * They all use the same aftermarket FFS configuration of 3 sectors of 64 KiB |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
96 each (64x3) at 0x3C0000. This FFS location is deliberately different from |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
97 the one used by Mot/Compal's firmwares, eliminating the possibility of one fw |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
98 trying to use the FFS created by the other, and by putting our FFS toward the |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
99 end of the flash we maximize the amount of flash space available for our |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
100 firmware code images. But even though we don't share our FFS with |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
101 Mot/Compal's official firmwares, we do share the same FFS between all of |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
102 FreeCalypso firmware projects - thus once you have initialized your FFS (see |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
103 below) with one FC firmware version, it will work with the others as well. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
104 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
105 If you need to reflash your C139 from one FC firmware version to another, |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
106 simply get in with fc-loadtool -h compal (no more need for the inefficient |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
107 -c 1003 or -c 1004 options or for tfc139) and reflash just the fw image part: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
108 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
109 loadtool> flash erase 0x10000 0x230000 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
110 loadtool> flash program-bin 0x10000 fwimage.bin |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
111 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
112 First boot of the firmware |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
113 ========================== |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
114 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
115 Connect the serial cable, but instead of running fc-loadtool, run rvinterf. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
116 Press the red power button on the phone briefly just like you would for |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
117 fc-loadtool entry. Because there is no fc-loadtool running on the host end of |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
118 the serial cable, the boot path will *not* be diverted in the bootloader, and |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
119 the main fw image will run - and this time it will be the FreeCalypso firmware |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
120 you have compiled and flashed. The phone's LCD will remain dark as there is no |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
121 LCD driver code in this firmware, but you will see trace output in the rvinterf |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
122 window, telling you that the fw is running. |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
123 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
124 Before you do anything else, you will need to run fc-fsio and initialize the |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
125 aftermarket FFS for our firmware: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
126 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
127 fsio> format / |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
128 fsio> mk-std-dirs |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
129 fsio> set-imeisv fc XXXXXXXX-YYYYYY-ZZ (punctuation optional, place anywhere) |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
130 fsio> set-rfcap dual-eu (if you have 900+1800 MHz hardware) |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
131 or |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
132 fsio> set-rfcap dual-us (if you have 850+1900 MHz hardware) |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
133 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
134 After you've initialized your FFS as above, you can exit fc-fsio, run fc-shell |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
135 and try some AT commands: |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
136 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
137 AT+CMEE=2 -- enable verbose error responses |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
138 AT+CFUN=1 -- enable radio and SIM interfaces |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
139 AT+COPS=0 -- register to the default GSM network |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
140 |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
141 When you are done, you can power the phone off by sending a 'poweroff' command |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
142 through fc-shell. The only other way is to yank the battery, and doing the |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
143 latter is recommended anyway: when a phone with the present hack-firmware |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
144 flashed into it is powered off but still has the battery inserted, even a |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
145 momentary accidental press of the power button will cause it to power on and |
596d86109e44
initial round of documentation
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
146 boot, but there will be absolutely no visual indication, as the LCD stays dark. |
95
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
147 |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
148 Magnetite-specific notes |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
149 ======================== |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
150 |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
151 Just like FC Citrine, FC Magnetite currently supports only AT command operation |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
152 via fc-shell; the C-Sample UI hack we have built earlier in tcs211-c139 has NOT |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
153 been incorporated into Magnetite - at least not yet. |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
154 |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
155 When compiling our Magnetite firmware for the C139 target, you will need to |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
156 select the l1reconst configuration - it is the only currently available |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
157 configuration that works on this target. Therefore, you configure.sh command |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
158 should be: |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
159 |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
160 ./configure.sh c139 l1reconst |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
161 |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
162 See the Compiling write-up for more details. |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
163 |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
164 Because we have not deblobbed the G23M firmware component yet (the l1reconst |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
165 configuration uses G23M binary blobs from TCS211/Sotovik), your Magnetite fw |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
166 build will include FAX_AND_DATA and GPRS functionality. In the FreeCalypso |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
167 environment where we are not doing WAP or MMS this functionality can only be |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
168 exercised on targets that bring out a classic modem UART with the classic AT |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
169 command interface to the external host, but Mot C139 is not one of those |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
170 targets - hence on the C139 all FAX_AND_DATA and GPRS code is nothing but dead |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
171 weight. We will only be able to remove this dead weight when and if we fully |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
172 deblob all of L1 and G23M, so it will be a while before we get there, and we'll |
48792a467305
doc/C139-Howto improved a bit
Mychaela Falconia <falcon@freecalypso.org>
parents:
94
diff
changeset
|
173 have to carry the dead weight until then. |