comparison src/g23m-gsm/dl/cus_dl.h @ 104:27a4235405c6

src/g23m-gsm: import from LoCosto source
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 04 Oct 2016 18:24:05 +0000
parents
children
comparison
equal deleted inserted replaced
103:76d139c7a25e 104:27a4235405c6
1 /*
2 +-----------------------------------------------------------------------------
3 | Project :
4 | Modul :
5 +-----------------------------------------------------------------------------
6 | Copyright 2002 Texas Instruments Berlin, AG
7 | All rights reserved.
8 |
9 | This file is confidential and a trade secret of Texas
10 | Instruments Berlin, AG
11 | The receipt of or possession of this file does not convey
12 | any rights to reproduce or disclose its contents or to
13 | manufacture, use, or sell anything it may describe, in
14 | whole, or in part, without the specific written consent of
15 | Texas Instruments Berlin, AG.
16 +-----------------------------------------------------------------------------
17 | Purpose : Custom dependent definitions for DL of the
18 | mobile station
19 |
20 | Use this header for definitions to integrate the
21 | protocol stack entity DL in your target system !
22 +-----------------------------------------------------------------------------
23 */
24
25 #ifndef CUS_DL_H
26 #define CUS_DL_H
27
28 /*==== CONSTANTS ==================================================*/
29 /*
30 * TIMER_VALUES
31 *
32 * Description : The constants define the timer values
33 * for the DL timer T200 depending on the various
34 * channel types and service access point identifiers.
35 * Value 1 means timeout, Value 0 means timer is stopped
36 */
37
38 #define T200_ACTIVE 2
39 #define T200_EXPIRED 1
40 #define T200_STOPPED 0
41
42 #define T200_SDCCH_SAPI_0_CNT (T200_EXPIRED + 1)
43 #define T200_FACCH_SAPI_0_CNT_FR (T200_EXPIRED + 9)
44 #define T200_FACCH_SAPI_0_CNT_HR (T200_EXPIRED + 5)
45 #define T200_SDCCH_SAPI_3_CNT (T200_EXPIRED + 3)
46 #define T200_SACCH_SAPI_3_CNT (T200_EXPIRED + 4)
47
48
49 /*
50 * PRIMITIVE SIZES
51 *
52 * Description : The primitive size of PH_DATA_REQ depends on the
53 * used channel. It is defined separately to achieve
54 * an optimum of transmitted bytes to physical layer.
55 * The default value which is defined here is calculated
56 * without any alignment bits.
57 * E.g. SACCH N201 = 18
58 * l1 header = 2
59 * l2 header = 3
60 * sdu offset = 2
61 * sdu length = 2
62 * ch_type = 1
63 * dummy = 1
64 * -----------------
65 * total = 29
66 *
67 */
68
69 #define SACCH_PRIM_SIZE 29
70 #define SDCCH_PRIM_SIZE 29
71 #define FACCH_PRIM_SIZE 29
72
73
74 /*
75 * MAX_QUEUED_MESSAGES
76 *
77 * Description : The constant define the maximum number of
78 * stored layer 3 messages in data link layer.
79 */
80
81 #define MAX_QUEUED_MESSAGES 10
82
83 /*
84 * VERSION
85 *
86 * Description : The constants define the type and the value
87 * of a version identification. The version
88 * is part of the monitor struct.
89 */
90
91 #define T_VERSION char
92 #define VERSION_DL "DL 1.0"
93
94 /*
95 * VSI_CALLER
96 *
97 * Description : For multithread applications the constant VSI_CALLER
98 * must be defined to identify the calling thread of the
99 * VSI-Interface. This must be done correponding to the
100 * type of T_VSI_CALLER in VSI.H. The comma symbol is
101 * neccessary because the vsi-functions are called
102 * like this vsi_xxx (VSI_CALLER par2, par3 ...)
103 */
104 #if defined (NEW_FRAME)
105 #define VSI_CALLER dl_handle,
106 #define VSI_CALLER_SINGLE dl_handle
107 #else
108 #ifdef OPTION_MULTITHREAD
109 #define VSI_CALLER DL_NAME,
110 #define VSI_CALLER_SINGLE DL_NAME
111 #else
112 #define VSI_CALLER
113 #define VSI_CALLER_SINGLE
114 #endif
115 #endif
116 #endif
117