FreeCalypso > hg > fc-magnetite

comparison src/g23m-aci/uart/uart_rxf.c @ 162:53929b40109c

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
src/g23m-aci: initial import from TCS3.2/LoCosto
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 11 Oct 2016 02:02:43 +0000
parents
children
comparison
equal deleted inserted replaced
161:4557e2a9c18e 162:53929b40109c
1 /*
2 +-----------------------------------------------------------------------------
3 | Project :
4 | Modul :
5 +-----------------------------------------------------------------------------
6 | Copyright 2002 Texas Instruments Berlin, AG
7 | All rights reserved.
8 |
9 | This file is confidential and a trade secret of Texas
10 | Instruments Berlin, AG
11 | The receipt of or possession of this file does not convey
12 | any rights to reproduce or disclose its contents or to
13 | manufacture, use, or sell anything it may describe, in
14 | whole, or in part, without the specific written consent of
15 | Texas Instruments Berlin, AG.
16 +-----------------------------------------------------------------------------
17 | Purpose : This modul is part of the entity UART and implements all
18 | procedures and functions as described in the
19 | SDL-documentation (RX-statemachine)
20 +-----------------------------------------------------------------------------
21 */
22
23 #ifndef UART_RXF_C
24 #define UART_RXF_C
25 #endif /* !UART_RXF_C */
26
27 #define ENTITY_UART
28
29 #ifndef FF_MULTI_PORT
30 /*==== INCLUDES =============================================================*/
31
32 #ifdef WIN32
33 #include "nucleus.h"
34 #endif /* WIN32 */
35 #include "typedefs.h" /* to get Condat data types */
36 #include "vsi.h" /* to get a lot of macros */
37 #include "macdef.h" /* to get a lot of macros */
38 #include "custom.h"
39 #include "gsm.h" /* to get a lot of macros */
40 #include "cnf_uart.h" /* to get cnf-definitions */
41 #include "mon_uart.h" /* to get mon-definitions */
42 #include "prim.h" /* to get the definitions of used SAP and directions */
43 #ifdef DTILIB
44 #include "dti.h" /* to get dti lib */
45 #endif /* DTILIB */
46 #include "pei.h" /* to get PEI interface */
47 #ifdef _TARGET_
48 #include "uart/serialswitch.h"
49 #include "uart/traceswitch.h"
50 #else /* _TARGET_ */
51 #include "serial_dat.h" /* to get definitions of serial driver */
52 #endif /* _TARGET_ */
53 #include "uart.h" /* to get the global entity definitions */
54
55 #ifdef _SIMULATION_
56 #include <stdio.h> /* to get sprintf */
57 #endif /* _SIMULATION_ */
58 #include <string.h> /* JK, delete warnings: to get memcpy */
59
60 /*==== CONST ================================================================*/
61
62 /*==== LOCAL VARS ===========================================================*/
63
64 /*==== PRIVATE FUNCTIONS ====================================================*/
65
66 /*==== PUBLIC FUNCTIONS =====================================================*/
67
68
69
70 /*
71 +------------------------------------------------------------------------------
72 | Function : rx_proc_input
73 +------------------------------------------------------------------------------
74 | Description : The function rx_proc_input() is the actual callback function
75 | to read data from the receive buffer.
76 |
77 | Parameters : uart_device - database for the affected UART device
78 |
79 +------------------------------------------------------------------------------
80 */
81 LOCAL void rx_proc_input (T_UART_DATA* uart_device)
82 {
83 USHORT i, len;
84 T_DLC *dlc; /* used Data Link Connection */
85 UBYTE *source; /* Data source pointer */
86 UBYTE *destination; /* Data destination pointer */
87 UBYTE temp_field; /* multi purpose value */
88 BOOL channels_complete; /* indicator of complete reception */
89 SHORT error_code; /* error code returned from a function */
90
91 TRACE_FUNCTION( "rx_proc_input" );
92
93 /*
94 * read data only if we have read permission
95 */
96 if(uart_device->rx.read_permission)
97 {
98 if(uart_device->rx.dlc_instance EQ UART_EMPTY_INSTANCE)
99 dlc = &uart_device->dlc_table[UART_CONTROL_INSTANCE];
100 else
101 dlc = &uart_device->dlc_table[uart_device->rx.dlc_instance];
102 destination = &dlc->receive_data->buffer[dlc->receive_pos];
103 #ifdef _SIMULATION_
104 {
105 char buf[80];
106 sprintf(buf,"uart_device->rx.dlc_instance: %d", uart_device->rx.dlc_instance);
107 TRACE_EVENT(buf);
108 }
109 #endif /* _SIMULATION_ */
110 if(uart_device->rx.dlc_instance EQ UART_EMPTY_INSTANCE)
111 {
112 /*
113 * Raw data
114 */
115 /*
116 * Is a data descriptor allocated and
117 * is the channel ready to receive
118 */
119 if((dlc->receive_process EQ UART_RX_PROCESS_READY) &&
120 (dlc->receive_data))
121 {
122 for (i=0; i < uart_device->rx.nsource; i++)
123 {
124 /*
125 * are there still data in the ring buffer segment and
126 * are there still space in the data descriptor
127 */
128 if ((uart_device->rx.size[i] > 0) &&
129 (dlc->receive_size > dlc->receive_pos))
130 {
131 len = dlc->receive_size - dlc->receive_pos;
132 if (len > uart_device->rx.size[i])
133 len = uart_device->rx.size[i];
134
135 memcpy(&dlc->receive_data->buffer[dlc->receive_pos],
136 uart_device->rx.source[i],
137 len);
138
139 uart_device->rx.size[i] -= len;
140 dlc->receive_pos += len;
141 dlc->receive_data->len = dlc->receive_pos;
142 }
143 }
144 dlc->receive_process = UART_RX_PROCESS_COMPLETE;
145 }
146 }
147 else
148 {
149 channels_complete = FALSE;
150 /*
151 * for each fragment
152 */
153 for (i=0; i < uart_device->rx.nsource; i++)
154 {
155 /*
156 * while there is still data in buffer and
157 * not yet all channels are processed
158 */
159 source = uart_device->rx.source[i];
160 while((uart_device->rx.size[i] > 0) && (channels_complete NEQ TRUE))
161 {
162 /*
163 * detect HDLC flag
164 */
165 if(*source EQ UART_HDLC_FLAG)
166 {
167 switch(uart_device->rx.analyze_state)
168 {
169 case UART_RX_ERROR:
170 /*
171 * begin of frame detected
172 */
173 uart_device->rx.analyze_state = UART_RX_BEGIN;
174 /* fall through */
175 case UART_RX_BEGIN:
176 /*
177 * initialize new packet
178 */
179 uart_device->rx.stored_len = 0;
180 uart_device->rx.address_field = 0;
181 uart_device->rx.fcs = UART_INITFCS;
182 uart_device->rx.escape = FALSE;
183 uart_device->rx.analyze_state = UART_RX_ADDRESS;
184 break;
185
186 default:
187 /*
188 * detect HDLC flag
189 */
190 if(uart_device->rx.stored_len > 0)
191 {
192 /*
193 * determine whether FCS already calculated
194 */
195 if(uart_device->rx.analyze_state NEQ UART_RX_FCS)
196 {
197 /*
198 * UART_RX_INFORMATION_...
199 */
200 destination--;
201 #ifdef _SIMULATION_
202 uart_device->rx.fcs = *destination;
203 #else /* _SIMULATION_ */
204 uart_device->rx.fcs = uart_device->
205 fcstab[uart_device->rx.fcs ^ *destination];
206 #endif /* _SIMULATION_ */
207 /*
208 * remove FCS from data stream
209 */
210 dlc->receive_pos--;
211 uart_data->rx.stored_len--;
212 }
213 if(uart_device->rx.fcs EQ UART_GOODFCS)
214 {
215 /*
216 * no error occured, frame complete
217 */
218 dlc->receive_data->len = dlc->receive_pos;
219 dlc->receive_process = UART_RX_PROCESS_COMPLETE;
220 uart_device->rx.analyze_state = UART_RX_END;
221 break;
222 }
223 }
224 /*
225 * remove receiced frame because of an error
226 */
227 switch(uart_device->rx.analyze_state)
228 {
229 case UART_RX_INFORMATION:
230 case UART_RX_FCS:
231 if(uart_data->rx.dlc_instance EQ UART_CONTROL_INSTANCE)
232 dlc->receive_pos-= 2;
233 dlc->receive_pos -= uart_data->rx.stored_len;
234 dlc->receive_process = UART_RX_PROCESS_READY;
235 break;
236 default:
237 /*
238 * Other states are not handeled here
239 */
240 break;
241 }
242 uart_device->rx.analyze_state = UART_RX_END;
243 break;
244 }
245 }
246 else if((*source EQ UART_HDLC_ESCAPE) &&
247 (uart_device->rx.escape NEQ TRUE))
248 {
249 /*
250 * detect Control Escape octet
251 */
252 uart_device->rx.escape = TRUE;
253 }
254 else
255 {
256 /*
257 * bit 5 complement for the octet followed by Control Escape
258 */
259 if(uart_device->rx.escape EQ TRUE)
260 {
261 *source ^= 0x20;
262 uart_device->rx.escape = FALSE;
263 }
264 /*
265 * store the packet and determine the protocol
266 */
267 switch(uart_device->rx.analyze_state)
268 {
269 case UART_RX_ERROR:
270 /*
271 * wait for next HDLC flag
272 */
273 break;
274
275 case UART_RX_ADDRESS:
276 if((*source & UART_EA) EQ UART_EA)
277 {
278 /*
279 * FCS calculation
280 */
281 #ifdef _SIMULATION_
282 uart_device->rx.fcs = *source;
283 #else /* _SIMULATION_ */
284 uart_device->rx.fcs = uart_device->
285 fcstab[uart_device->rx.fcs ^ *source];
286 #endif /* _SIMULATION_ */
287 /*
288 * store Address field
289 */
290 uart_device->rx.address_field = *source;
291 uart_device->rx.analyze_state = UART_RX_CONTROL;
292 }
293 else
294 {
295 /*
296 * invalid frame detected
297 */
298 uart_device->rx.analyze_state = UART_RX_ERROR;
299 }
300 break;
301
302 case UART_RX_CONTROL:
303 switch(*source)
304 {
305 case UART_UIH_DATA_FRAME:
306 /*
307 * Data frame detected
308 */
309 temp_field = uart_device->rx.address_field >> UART_DLCI_POS;
310 /*
311 * if it is an existing channel, but not control channel
312 */
313 if((temp_field NEQ UART_DLCI_CONTROL) &&
314 (uart_device->dlc_instance[temp_field] NEQ
315 UART_EMPTY_INSTANCE))
316 {
317 uart_device->rx.dlc_instance =
318 uart_device->dlc_instance[temp_field];
319 dlc = &uart_device->dlc_table[uart_device->rx.dlc_instance];
320 #ifdef _SIMULATION_
321 TRACE_EVENT_P2("Addressfield found DLCI: 0x%02X \
322 (dlc_instance 0x%02X)",
323 temp_field, uart_device->rx.dlc_instance);
324 #endif /* _SIMULATION_ */
325 if(dlc->receive_process EQ UART_RX_PROCESS_READY)
326 {
327 /*
328 * reception Data channel found
329 * FCS calculation
330 */
331 #ifdef _SIMULATION_
332 uart_device->rx.fcs = *source;
333 #else /* _SIMULATION_ */
334 uart_device->rx.fcs = uart_device->
335 fcstab[uart_device->
336 rx.fcs ^ *source];
337 #endif /* _SIMULATION_ */
338 destination = &dlc->receive_data->
339 buffer[dlc->receive_pos];
340 uart_device->rx.analyze_state = UART_RX_INFORMATION;
341 break;
342 }
343 else if(dlc->receive_process EQ UART_RX_PROCESS_COMPLETE)
344 {
345 channels_complete = TRUE;
346 break;
347 }
348 }
349 /* fall through */
350 case UART_SABM_FRAME:
351 case UART_UA_FRAME:
352 case UART_DM_DATA_FRAME:
353 case UART_DM_CONTROL_FRAME:
354 case UART_DISC_FRAME:
355 case UART_UIH_CONTROL_FRAME:
356 /*
357 * Control frame detected
358 */
359 dlc = &uart_device->dlc_table[UART_CONTROL_INSTANCE];
360 uart_device->rx.dlc_instance = UART_CONTROL_INSTANCE;
361 if(dlc->receive_process EQ UART_RX_PROCESS_READY)
362 {
363 /*
364 * reception Control channel found
365 * FCS calculation
366 */
367 #ifdef _SIMULATION_
368 uart_device->rx.fcs = *source;
369 #else /* _SIMULATION_ */
370 uart_device->rx.fcs = uart_device->
371 fcstab[uart_device->
372 rx.fcs ^ *source];
373 #endif /* _SIMULATION_ */
374 destination = &dlc->receive_data->
375 buffer[dlc->receive_pos];
376 uart_device->rx.analyze_state = UART_RX_INFORMATION;
377 /*
378 * store Address and Control field
379 */
380 *destination = uart_device->rx.address_field;
381 destination++;
382 dlc->receive_pos++;
383 *destination = *source;
384 destination++;
385 dlc->receive_pos++;
386 }
387 else if(dlc->receive_process EQ UART_RX_PROCESS_COMPLETE)
388 {
389 channels_complete = TRUE;
390 }
391 else
392 /*
393 * discard frame, because it is unexpected
394 */
395 uart_device->rx.analyze_state = UART_RX_ERROR;
396 break;
397 default:
398 /*
399 * invalid frame detected
400 */
401 uart_device->rx.analyze_state = UART_RX_ERROR;
402 break;
403 }
404 break;
405
406 case UART_RX_INFORMATION:
407 if(uart_device->rx.stored_len < uart_device->n1)
408 {
409 *destination = *source;
410 /*
411 * increase destination pointer
412 */
413 destination++;
414 uart_device->rx.stored_len++;
415 dlc->receive_pos++;
416 }
417 else
418 {
419 /*
420 * FCS calculation
421 */
422 #ifdef _SIMULATION_
423 uart_device->rx.fcs = *source;
424 #else /* _SIMULATION_ */
425 uart_device->rx.fcs = uart_device->
426 fcstab[uart_device->rx.fcs ^ *source];
427 #endif /* _SIMULATION_ */
428 uart_device->rx.analyze_state = UART_RX_FCS;
429 }
430 break;
431
432 case UART_RX_FCS:
433 /*
434 * remove receiced packet because its to long
435 */
436 if(uart_data->rx.dlc_instance EQ UART_CONTROL_INSTANCE)
437 dlc->receive_pos-= 2;
438 dlc->receive_pos -= uart_data->rx.stored_len;
439 dlc->receive_process = UART_RX_PROCESS_READY;
440 uart_device->rx.analyze_state = UART_RX_ERROR;
441 break;
442
443 default:
444 /*
445 * wrong analyze state
446 */
447 uart_device->rx.analyze_state = UART_RX_ERROR;
448 break;
449 }
450 }
451 if(uart_device->rx.analyze_state EQ UART_RX_END)
452 uart_device->rx.analyze_state = UART_RX_BEGIN;
453 /*
454 * don't move source pointer
455 * if each possible channel was processed
456 * In this case analyze_state should be UART_RX_CONTROL.
457 * The Control field must be analyzed again in next call of
458 * this function.
459 */
460 else if(channels_complete NEQ TRUE)
461 {
462 /*
463 * increase source pointer
464 */
465 source++;
466 uart_device->rx.size[i]--;
467 }
468 }
469 }
470 }
471 }
472
473 PSIGNAL(hCommUART, UART_DRIVER_RECEIVED_IND, uart_device);
474
475 *uart_device->rx.reInstall = rm_noInstall;
476
477 /*
478 * update pointer in UART driver
479 */
480 if((error_code = UF_InpAvail (uart_device->device)) < 0 )
481 {
482 TRACE_ERROR_P2("UF Driver: DataPointerUpdate failed, [%d], uart_rxf.c(%d)",
483 error_code, __LINE__);
484 }
485 } /* rx_proc_input() */
486
487
488
489 /*
490 +------------------------------------------------------------------------------
491 | Function : rx_init
492 +------------------------------------------------------------------------------
493 | Description : The function rx_init() initializes the RX service
494 |
495 | Parameters : no parameters
496 |
497 +------------------------------------------------------------------------------
498 */
499 GLOBAL void rx_init ()
500 {
501 #ifndef _SIMULATION_
502 #ifdef WIN32
503 #ifndef _TARGET_
504 char buf[80];
505 #endif /* !_TARGET_ */
506 STATUS sts;
507 #endif /* WIN32 */
508 #endif /* !_SIMULATION_ */
509
510 TRACE_FUNCTION( "rx_init" );
511
512 #ifndef _SIMULATION_
513 #ifdef WIN32
514 sts = NU_Create_HISR (&uart_data->rx.rx_HISR,
515 "RX_HISR",
516 rx_proc_input,
517 2,
518 uart_data->HISR_stack,
519 HISR_STACK_SIZE);
520 #ifndef _TARGET_
521 sprintf (buf, "NU_Create_HISR(RX) = %d", sts);
522 TRACE_EVENT (buf);
523 #endif /* _TARGET_ */
524 #endif /* WIN32 */
525 #endif /* !_SIMULATION_ */
526
527 uart_data->rx.read_permission = FALSE;
528 uart_data->rx.prev_lines = 0;
529 uart_data->rx.dlc_instance = UART_EMPTY_INSTANCE;
530 uart_data->rx.escape = FALSE;
531 uart_data->rx.analyze_state = UART_RX_ERROR;
532 uart_data->rx.receive_state = UART_RX_NOT_RECEIVING;
533 uart_data->rx.fcs = UART_INITFCS;
534 uart_data->rx.address_field = 0;
535 uart_data->rx.stored_len = 0;
536
537 INIT_STATE( UART_SERVICE_RX , RX_DEAD );
538 } /* rx_init() */
539
540
541
542 /*
543 +------------------------------------------------------------------------------
544 | Function : rx_readOutFunc_0
545 +------------------------------------------------------------------------------
546 | Description : The function rx_readOutFunc_0() is the official callback
547 | function to read data from the receive buffer of UART device 0.
548 | It just copies the parameters and calls then the actual
549 | function.
550 |
551 | Parameters : cldFromIrq - called from interrupt
552 | reInstall - reinstallation mode
553 | nsource - number of source pointers
554 | source - array of source pointers
555 | size - array of sizes for every source pointer
556 | state - state of V.24 lines
557 |
558 +------------------------------------------------------------------------------
559 */
560 GLOBAL void rx_readOutFunc_0 (BOOL cldFromIrq,
561 T_reInstMode *reInstall,
562 UBYTE nsource,
563 UBYTE *source[],
564 USHORT *size,
565 ULONG state)
566 {
567 #ifndef _SIMULATION_
568 #ifndef _TARGET_
569 char buf[40];
570 #endif /* !_TARGET_ */
571 #endif /* !_SIMULATION_ */
572 T_UART_DATA* uart_device;
573
574 TRACE_FUNCTION( "rx_readOutFunc_0" );
575
576 /*
577 * select UART device 0
578 */
579 uart_device = &(uart_data_base[0]);
580
581 /*
582 * store parameters
583 */
584 uart_device->rx.cldFromIrq = cldFromIrq;
585 uart_device->rx.nsource = nsource;
586 uart_device->rx.source[0] = source[0];
587 uart_device->rx.source[1] = source[1];
588 uart_device->rx.size = size;
589 uart_device->rx.lines = state;
590 uart_device->rx.reInstall = reInstall;
591
592 #ifndef _SIMULATION_
593 #ifdef WIN32
594 if (cldFromIrq)
595 {
596 STATUS sts;
597 /*
598 * interrupt context of the UART driver -> activate the HISR
599 */
600 sts = NU_Activate_HISR (&uart_device->rx.rx_HISR);
601 #ifndef _TARGET_
602 sprintf (buf, "NU_Activate_HISR(RX) = %d", sts);
603 TRACE_EVENT (buf);
604 #endif /* !_TARGET_ */
605 }
606 else
607 #endif /* WIN32 */
608 #endif /* !_SIMULATION_ */
609 {
610 #ifdef _SIMULATION_
611 UBYTE* trace_source[2];
612 USHORT trace_size[2];
613 USHORT i;
614 USHORT pos;
615 char buf[90];
616
617 trace_source[0] = source[0];
618 trace_source[1] = source[1];
619
620 trace_size[0] = size[0];
621 trace_size[1] = size[1];
622
623 /*
624 * trace input
625 */
626 if((nsource) &&
627 (uart_device->rx.read_permission))
628 {
629
630 TRACE_EVENT("==== INRAW");
631 i = 0;
632 pos = 0;
633 while(pos < trace_size[0])
634 {
635 i+= sprintf(&buf[i], "0x%02x, ", trace_source[0][pos]);
636 pos++;
637 if(i > 80)
638 {
639 TRACE_EVENT( buf );
640 i = 0;
641 }
642 else if(pos >= trace_size[0])
643 {
644 TRACE_EVENT( buf );
645 }
646 }
647 if(nsource > 1)
648 {
649 i = 0;
650 pos = 0;
651 while(pos < trace_size[1])
652 {
653 i+= sprintf(&buf[i], "0x%02x, ", trace_source[1][pos]);
654 pos++;
655 if(i > 80)
656 {
657 TRACE_EVENT( buf );
658 i = 0;
659 }
660 else if(pos >= trace_size[1])
661 {
662 TRACE_EVENT( buf );
663 }
664 }
665 }
666 }
667 #endif /* _SIMULATION_ */
668
669 /*
670 * normal callback from UF_ReadData
671 */
672 rx_proc_input(uart_device);
673 }
674
675 } /* rx_readOutFunc_0() */
676
677
678
679 #ifdef FF_TWO_UART_PORTS
680 /*
681 +------------------------------------------------------------------------------
682 | Function : rx_readOutFunc_1
683 +------------------------------------------------------------------------------
684 | Description : The function rx_readOutFunc_1() is the official callback
685 | function to read data from the receive buffer of UART device 1.
686 | It just copies the parameters and calls then the actual
687 | function.
688 |
689 | Parameters : cldFromIrq - called from interrupt
690 | reInstall - reinstallation mode
691 | nsource - number of source pointers
692 | source - array of source pointers
693 | size - array of sizes for every source pointer
694 | state - state of V.24 lines
695 |
696 +------------------------------------------------------------------------------
697 */
698 GLOBAL void rx_readOutFunc_1 (BOOL cldFromIrq,
699 T_reInstMode *reInstall,
700 UBYTE nsource,
701 UBYTE *source[],
702 USHORT *size,
703 ULONG state)
704 {
705 #ifndef _SIMULATION_
706 #ifndef _TARGET_
707 char buf[40];
708 #endif /* !_TARGET_ */
709 #endif /* !_SIMULATION_ */
710 T_UART_DATA* uart_device;
711
712 TRACE_FUNCTION( "rx_readOutFunc_1" );
713
714 /*
715 * select UART device 1
716 */
717 uart_device = &(uart_data_base[1]);
718
719 /*
720 * store parameters
721 */
722 uart_device->rx.cldFromIrq = cldFromIrq;
723 uart_device->rx.nsource = nsource;
724 uart_device->rx.source[0] = source[0];
725 uart_device->rx.source[1] = source[1];
726 uart_device->rx.size = size;
727 uart_device->rx.lines = state;
728 uart_device->rx.reInstall = reInstall;
729
730 #ifndef _SIMULATION_
731 #ifdef WIN32
732 if (cldFromIrq)
733 {
734 STATUS sts;
735 /*
736 * interrupt context of the UART driver -> activate the HISR
737 */
738 sts = NU_Activate_HISR (&uart_device->rx.rx_HISR);
739 #ifndef _TARGET_
740 sprintf (buf, "NU_Activate_HISR(RX) = %d", sts);
741 TRACE_EVENT (buf);
742 #endif /* !_TARGET_ */
743 }
744 else
745 #endif /* WIN32 */
746 #endif /* !_SIMULATION_ */
747 {
748 #ifdef _SIMULATION_
749 UBYTE* trace_source[2];
750 USHORT trace_size[2];
751 USHORT i;
752 USHORT pos;
753 char buf[90];
754
755 trace_source[0] = source[0];
756 trace_source[1] = source[1];
757
758 trace_size[0] = size[0];
759 trace_size[1] = size[1];
760
761 /*
762 * trace input
763 */
764 if((nsource) &&
765 (uart_device->rx.read_permission))
766 {
767
768 TRACE_EVENT("==== INRAW");
769 i = 0;
770 pos = 0;
771 while(pos < trace_size[0])
772 {
773 i+= sprintf(&buf[i], "0x%02x, ", trace_source[0][pos]);
774 pos++;
775 if(i > 80)
776 {
777 TRACE_EVENT( buf );
778 i = 0;
779 }
780 else if(pos >= trace_size[0])
781 {
782 TRACE_EVENT( buf );
783 }
784 }
785 if(nsource > 1)
786 {
787 i = 0;
788 pos = 0;
789 while(pos < trace_size[1])
790 {
791 i+= sprintf(&buf[i], "0x%02x, ", trace_source[1][pos]);
792 pos++;
793 if(i > 80)
794 {
795 TRACE_EVENT( buf );
796 i = 0;
797 }
798 else if(pos >= trace_size[1])
799 {
800 TRACE_EVENT( buf );
801 }
802 }
803 }
804 }
805 #endif /* _SIMULATION_ */
806
807 /*
808 * normal callback from UF_ReadData
809 */
810 rx_proc_input(uart_device);
811 }
812
813 } /* rx_readOutFunc_1() */
814 #endif /* FF_TWO_UART_PORTS */
815 #endif /* !FF_MULTI_PORT */