comparison cdg211/cdginc/p_pkt.val @ 4:56abf6cf8a0b

cdg211: cdginc/mdf/pdf files from TCS211-20070608
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Sep 2016 01:11:35 +0000
parents
children
comparison
equal deleted inserted replaced
3:93999a60b835 4:56abf6cf8a0b
1 /*
2 +--------------------------------------------------------------------------+
3 | PROJECT : PROTOCOL STACK |
4 | FILE : p_pkt.val |
5 | SOURCE : "__out__\g23m_dfile\prim\pkt.pdf" |
6 | LastModified : "2002-10-17" |
7 | IdAndVersion : "8443.105.02.106" |
8 | SrcFileTime : "Mon Nov 24 15:50:52 2003" |
9 | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:15 2007 |
10 | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! |
11 +--------------------------------------------------------------------------+
12 */
13
14 /* PRAGMAS
15 * PREFIX : NONE
16 * COMPATIBILITY_DEFINES : NO (require PREFIX)
17 * ALWAYS_ENUM_IN_VAL_FILE: NO
18 * ENABLE_GROUP: NO
19 * CAPITALIZE_TYPENAME: NO
20 */
21
22
23 #ifndef P_PKT_VAL
24 #define P_PKT_VAL
25
26
27 #define CDG_ENTER__P_PKT_VAL
28
29 #define CDG_ENTER__FILENAME _P_PKT_VAL
30 #define CDG_ENTER__P_PKT_VAL__FILE_TYPE CDGINC
31 #define CDG_ENTER__P_PKT_VAL__LAST_MODIFIED _2002_10_17
32 #define CDG_ENTER__P_PKT_VAL__ID_AND_VERSION _8443_105_02_106
33
34 #define CDG_ENTER__P_PKT_VAL__SRC_FILE_TIME _Mon_Nov_24_15_50_52_2003
35
36 #include "CDG_ENTER.h"
37
38 #undef CDG_ENTER__P_PKT_VAL
39
40 #undef CDG_ENTER__FILENAME
41
42
43 /*
44 * Value constants for VAL_sleep_mode
45 */
46 #define DIO_SLEEP_ENABLE (0x1) /* Enter sleep mode if possible. */
47 #define DIO_SLEEP_DISABLE (0x2) /* Do not enter sleep mode. */
48
49 /*
50 * Value constants for VAL_parity
51 */
52 #define DIO_PARITY_NO (0x1) /* Don't send a parity bit. */
53 #define DIO_PARITY_ODD (0x2) /* Send an odd parity bit. */
54 #define DIO_PARITY_EVEN (0x4) /* Send an even parity bit. */
55 #define DIO_PARITY_SPACE (0x8) /* Send a space for parity bit. */
56
57 /*
58 * Value constants for VAL_flow_control
59 */
60 #define DIO_FLOW_NO_NO (0x1) /* No flow control for both directions. */
61 #define DIO_FLOW_SW_NO (0x2) /* Software flow control for receive direction and no flow control for transmit direction. */
62 #define DIO_FLOW_HW_NO (0x4) /* Hardware flow control for receive direction and no flow control for transmit direction. */
63 #define DIO_FLOW_NO_SW (0x8) /* No flow control for receive direction and software flow control for transmit direction. */
64 #define DIO_FLOW_SW_SW (0x10) /* Software flow control for both directions. */
65 #define DIO_FLOW_HW_SW (0x20) /* Hardware flow control for receive direction and software flow control for transmit direction. */
66 #define DIO_FLOW_NO_HW (0x40) /* No flow control for receive direction and hardware flow control for transmit direction. */
67 #define DIO_FLOW_SW_HW (0x80) /* Software flow control for receive direction and hardware flow control for transmit direction. */
68 #define DIO_FLOW_HW_HW (0x100) /* Hardware flow control for both directions. */
69
70 /*
71 * Value constants for VAL_data_mode
72 */
73 #define DIO_MODE_AT (0x1) /* The TE will transmit AT commands. */
74 #define DIO_MODE_DATA (0x2) /* The TE will transmit data. */
75 #define DIO_MODE_TRACE (0x4) /* The TE expects trace information via this device */
76 #define DIO_MODE_DEFAULT (0x3) /* Default value if the driver can not provide this information */
77
78 /*
79 * Value constants for VAL_stop_bits
80 */
81 #define DIO_STOP_1 (0x1) /* Send 1 stop bit. */
82 #define DIO_STOP_15 (0x2) /* Send 1.5 stop bits. */
83 #define DIO_STOP_2 (0x4) /* Send 2 stop bits. */
84
85 /*
86 * Value constants for VAL_baud
87 */
88 #define DIO_BAUD_812500 (0x80000) /* Transmission rate of 812500 bits/sec. */
89 #define DIO_BAUD_406250 (0x40000) /* Transmission rate of 406250 bits/sec. */
90 #define DIO_BAUD_203125 (0x20000) /* Transmission rate of 203125 bits/sec. */
91 #define DIO_BAUD_115200 (0x10000) /* Transmission rate of 115200 bits/sec. */
92 #define DIO_BAUD_57600 (0x8000) /* Transmission rate of 57600 bits/sec. */
93 #define DIO_BAUD_38400 (0x4000) /* Transmission rate of 38400 bits/sec. */
94 #define DIO_BAUD_33900 (0x2000) /* Transmission rate of 33900 bits/sec. */
95 #define DIO_BAUD_28800 (0x1000) /* Transmission rate of 28800 bits/sec. */
96 #define DIO_BAUD_19200 (0x800) /* Transmission rate of 19200 bits/sec. */
97 #define DIO_BAUD_14400 (0x400) /* Transmission rate of 14400 bits/sec. */
98 #define DIO_BAUD_9600 (0x200) /* Transmission rate of 9600 bits/sec. */
99 #define DIO_BAUD_7200 (0x100) /* Transmission rate of 7200 bits/sec. */
100 #define DIO_BAUD_4800 (0x80) /* Transmission rate of 4800 bits/sec. */
101 #define DIO_BAUD_2400 (0x40) /* Transmission rate of 2400 bits/sec. */
102 #define DIO_BAUD_1200 (0x20) /* Transmission rate of 1200 bits/sec. */
103 #define DIO_BAUD_600 (0x10) /* Transmission rate of 600 bits/sec. */
104 #define DIO_BAUD_300 (0x8) /* Transmission rate of 300 bits/sec. */
105 #define DIO_BAUD_150 (0x4) /* Transmission rate of 150 bits/sec. */
106 #define DIO_BAUD_75 (0x2) /* Transmission rate of 75 bits/sec. */
107 #define DIO_BAUD_AUTO (0x1) /* Automatic detection. */
108
109 /*
110 * Value constants for VAL_mux_configuration
111 */
112 #define DIO_MUX_MODE_BASIC (0x1) /* The multiplexer supports Basic option. */
113 #define DIO_MUX_MODE_ADVANCED (0x2) /* The multiplexer supports Advanced option. */
114 #define DIO_MUX_SUBSET_UIH (0x4) /* The multiplexer supports UIH frames. */
115 #define DIO_MUX_SUBSET_UI (0x8) /* The multiplexer supports UI frames. */
116 #define DIO_MUX_SUBSET_I (0x10) /* The multiplexer supports I frames. */
117
118 /*
119 * Value constants for VAL_guard_period
120 */
121 #define DIO_ESC_OFF (0x0) /* Turn escape sequence detection off. */
122
123 /*
124 * Value constants for VAL_data_bits
125 */
126 #define DIO_CHAR_5 (0x10) /* Send 5 bits per character. */
127 #define DIO_CHAR_6 (0x20) /* Send 6 bits per character. */
128 #define DIO_CHAR_7 (0x40) /* Send 7 bits per character. */
129 #define DIO_CHAR_8 (0x80) /* Send 8 bits per character. */
130
131 /*
132 * Value constants for VAL_convergence
133 */
134 #define DIO_CONV_SER (0x1) /* The device can contain serial data. */
135 #define DIO_CONV_PACKET (0x2) /* The device can contain packet data. */
136 #define DIO_CONV_MUX (0x4) /* The device can start a multiplexer. */
137
138 /*
139 * Value constants for VAL_state
140 */
141 #define DIO_SA (0x80000000)/* read/write, Device ready */
142 #define DIO_SB (0x40000000)/* read/write, Data valid */
143 #define DIO_X (0x20000000)/* read/write, Flow control */
144 #define DIO_RING (0x10000000)/* write, RING indicator */
145 #define DIO_ESC (0x8000000)/* read, escape sequence detected */
146 #define DIO_DISC (0x4000000)/* read, link disconnected */
147 #define DIO_MUX_STOP (0x1000000)/* read/write, stop the multiplexer */
148 #define DIO_BRK (0x2000000)/* read/write, break received / to be sent */
149 #define DIO_BRKLEN (0xff) /* read/write, length of the break signal in characters */
150 #define DIO_PACKET_UNKNOWN (0x0) /* Packet transfer: No packet type available. */
151 #define DIO_PACKET_IP (0x21) /* Packet transfer: Simple IP packet */
152 #define DIO_PACKET_CTCP (0x2d) /* Packet transfer: Van Jacobson compressed TCP/IP header */
153 #define DIO_PACKET_UTCP (0x2f) /* Packet transfer: Van Jacobson uncompressed TCP/IP header */
154
155 /*
156 * Value constants for VAL_cause
157 */
158 #define PKTCS_SUCCESS (0xd200) /* 0b11010010 00000000 No error, success */
159 #define PKTCS_INVALID_PARAMS (0xd201) /* 0b11010010 00000001 Device number invalid */
160 #define PKTCS_INVALID_PEER (0xd202) /* 0b11010010 00000010 Peer does not exist */
161 #define PKTCS_DISCONNECT (0xd203) /* 0b11010010 00000011 The driver signalled a DRV_SIGTYPE_DISCONNECT */
162 #define PKTCS_INTERNAL_DRV_ERROR (0xd204) /* 0b11010010 00000100 A driver function returned DRV_INTERNAL_ERROR */
163
164 /*
165 * user defined constants
166 */
167 #define DIO_MAX_NAME_LENGTH (0x10)
168 #define DIO_MAX_DATA_LENGTH (0x64)
169
170 #include "CDG_LEAVE.h"
171
172
173 #endif