FreeCalypso > hg > fc-magnetite
comparison cdg211/cdginc/p_t30.val @ 4:56abf6cf8a0b
cdg211: cdginc/mdf/pdf files from TCS211-20070608
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 26 Sep 2016 01:11:35 +0000 |
parents | |
children |
comparison
equal
deleted
inserted
replaced
3:93999a60b835 | 4:56abf6cf8a0b |
---|---|
1 /* | |
2 +--------------------------------------------------------------------------+ | |
3 | PROJECT : PROTOCOL STACK | | |
4 | FILE : p_t30.val | | |
5 | SOURCE : "__out__\g23m_dfile\prim\t30.pdf" | | |
6 | LastModified : "2002-04-23" | | |
7 | IdAndVersion : "8411.104.98.312" | | |
8 | SrcFileTime : "Mon Nov 24 15:49:20 2003" | | |
9 | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:16 2007 | | |
10 | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | | |
11 +--------------------------------------------------------------------------+ | |
12 */ | |
13 | |
14 /* PRAGMAS | |
15 * PREFIX : NONE | |
16 * COMPATIBILITY_DEFINES : NO (require PREFIX) | |
17 * ALWAYS_ENUM_IN_VAL_FILE: NO | |
18 * ENABLE_GROUP: NO | |
19 * CAPITALIZE_TYPENAME: NO | |
20 */ | |
21 | |
22 | |
23 #ifndef P_T30_VAL | |
24 #define P_T30_VAL | |
25 | |
26 | |
27 #define CDG_ENTER__P_T30_VAL | |
28 | |
29 #define CDG_ENTER__FILENAME _P_T30_VAL | |
30 #define CDG_ENTER__P_T30_VAL__FILE_TYPE CDGINC | |
31 #define CDG_ENTER__P_T30_VAL__LAST_MODIFIED _2002_04_23 | |
32 #define CDG_ENTER__P_T30_VAL__ID_AND_VERSION _8411_104_98_312 | |
33 | |
34 #define CDG_ENTER__P_T30_VAL__SRC_FILE_TIME _Mon_Nov_24_15_49_20_2003 | |
35 | |
36 #include "CDG_ENTER.h" | |
37 | |
38 #undef CDG_ENTER__P_T30_VAL | |
39 | |
40 #undef CDG_ENTER__FILENAME | |
41 | |
42 | |
43 /* | |
44 * Value constants for VAL_dir | |
45 */ | |
46 #define DIR_SND (0x0) /* send fax data */ | |
47 #define DIR_RCV (0x1) /* receive fax data */ | |
48 | |
49 /* | |
50 * Value constants for VAL_sgn | |
51 */ | |
52 #define SGN_OK (0x0) /* OK */ | |
53 #define SGN_DIS (0x1) /* Digital identification signal */ | |
54 #define SGN_CSI (0x2) /* Called subscriber identification */ | |
55 #define SGN_NSF (0x4) /* Non-standard facilities */ | |
56 #define SGN_CFR (0x21) /* Confirmation to receive */ | |
57 #define SGN_FTT (0x22) /* Failure to train */ | |
58 #define SGN_MCF (0x31) /* Message confirmation */ | |
59 #define SGN_RTN (0x32) /* Retrain negative */ | |
60 #define SGN_RTP (0x33) /* Retrain positive */ | |
61 #define SGN_PIN (0x34) /* Procedure interrupt negative */ | |
62 #define SGN_PIP (0x35) /* Procedure interrupt positive */ | |
63 #define SGN_FDM (0x3f) /* File diagnostics message */ | |
64 #define SGN_DCS (0x41) /* Digital command signal */ | |
65 #define SGN_TSI (0x42) /* Transmitting subscriber identification */ | |
66 #define SGN_SUB (0x43) /* Subaddress */ | |
67 #define SGN_NSS (0x44) /* Non-standard set-up */ | |
68 #define SGN_PWDR (0x45) /* Password - receive */ | |
69 #define SGN_TCF (0x4f) /* Training check frame */ | |
70 #define SGN_CRP (0x58) /* Command repeat */ | |
71 #define SGN_DCN (0x5f) /* Disconnect */ | |
72 #define SGN_EOM (0x71) /* End of message */ | |
73 #define SGN_MPS (0x72) /* Multi-page signal */ | |
74 #define SGN_EOP (0x74) /* End of procedure */ | |
75 #define SGN_PRI_EOM (0x79) /* Procedure Interrupt - End Of Message */ | |
76 #define SGN_PRI_MPS (0x7a) /* Procedure Interrupt - MultiPage Signal */ | |
77 #define SGN_PRI_EOP (0x7c) /* Procedure Interrupt - End Of Procedure */ | |
78 #define SGN_DTC (0x81) /* Digital transmit command */ | |
79 #define SGN_CIG (0x82) /* Calling subscriber identification */ | |
80 #define SGN_PWDS (0x83) /* Password - send */ | |
81 #define SGN_NSC (0x84) /* Non-standard facilities command */ | |
82 #define SGN_SEP (0x85) /* Selective Polling */ | |
83 #define SGN_FCS_ERR (0xf1) /* FCS error */ | |
84 #define SGN_NO_RES (0xf2) /* No response */ | |
85 #define SGN_CONT (0xf3) /* continue */ | |
86 #define SGN_NOT_USED (0xff) /* Not used */ | |
87 | |
88 /* | |
89 * Value constants for VAL_cmpl | |
90 */ | |
91 #define CMPL_EOP (0x0) /* end of procedure */ | |
92 #define CMPL_EOM (0x1) /* end of message */ | |
93 #define CMPL_PI (0x2) /* procedure interrupt */ | |
94 #define CMPL_DCN (0x3) /* disconnect */ | |
95 | |
96 /* | |
97 * Value constants for VAL_cause | |
98 */ | |
99 #define ERR_PH_A_UNSPEC (0x4d10) /* unspecified phase A error */ | |
100 #define ERR_PH_A_T1_TIMEOUT (0x4d11) /* no answer (T30 T1 timeout) */ | |
101 #define ERR_PH_B_SND_UNSPEC (0x4d20) /* unspecified transmit phase B error */ | |
102 #define ERR_PH_B_SND_CANT_RCV_OR_SND (0x4d21) /* remote cannot receive or send */ | |
103 #define ERR_PH_B_SND_COMREC (0x4d22) /* COMREC error in transmit phase B */ | |
104 #define ERR_PH_B_SND_COMREC_INVALID_CMD_RCVD (0x4d23)/* COMREC invalid command received */ | |
105 #define ERR_PH_B_SND_RSPREC (0x4d24) /* RSPREC transmit error phase B */ | |
106 #define ERR_PH_B_SND_DCS_RPTD_3_TIMES (0x4d25) /* DCS send three times without response */ | |
107 #define ERR_PH_B_SND_DIS_DTC_RCVD_3_TIMES (0x4d26)/* DIS/DTC received 3 times; DCS not recognized */ | |
108 #define ERR_PH_B_SND_FTT_2400 (0x4d27) /* failure to train at 2400 bit/s or +FMS value */ | |
109 #define ERR_PH_B_SND_INVALID_RESP_RCVD (0x4d28) /* invalid respones received */ | |
110 #define ERR_PH_C_SND_UNSPEC (0x4d40) /* unspecified transmit phase C error */ | |
111 #define ERR_PH_C_SND_UNSPEC_IMAGE_CONV (0x4d41) /* unspecified image format error */ | |
112 #define ERR_PH_C_SND_DTE_TO_DTC_DATA_UNDERFLOW (0x4d43)/* DTE to DTC data underflow */ | |
113 #define ERR_PH_C_SND_UNRECOG_TRANSP_DATA_CMD (0x4d44)/* unrecognized transparent data command */ | |
114 #define ERR_PH_C_SND_IMAGE_LINE_LENGTH (0x4d45) /* image error, line length wrong */ | |
115 #define ERR_PH_C_SND_IMAGE_PAGE_LENGTH (0x4d46) /* image error, page length wrong */ | |
116 #define ERR_PH_C_SND_IMAGE_COMPRESSION_MODE (0x4d47)/* image error, compression mode wrong */ | |
117 #define ERR_PH_D_SND_UNSPEC (0x4d50) /* unspecified transmit phase D error */ | |
118 #define ERR_PH_D_SND_RSPREC (0x4d51) /* RESPREC transmit error phase D */ | |
119 #define ERR_PH_D_SND_MPS_RPTD_3_TIMES (0x4d52) /* no response to MPS repeated 3 times */ | |
120 #define ERR_PH_D_SND_INVALID_RESP_TO_MPS (0x4d53) /* invalid respones to MPS */ | |
121 #define ERR_PH_D_SND_EOP_RPTD_3_TIMES (0x4d54) /* no response to EOP repeated 3 times */ | |
122 #define ERR_PH_D_SND_INVALID_RESP_TO_EOP (0x4d55) /* invalid response to EOP */ | |
123 #define ERR_PH_D_SND_EOM_RPTD_3_TIMES (0x4d56) /* no response to EOM repeated 3 times */ | |
124 #define ERR_PH_D_SND_INVALID_RESP_TO_EOM (0x4d57) /* invalid response to EOM */ | |
125 #define ERR_PH_D_SND_UNABLE_TO_CONT (0x4d58) /* unable to continue after PIN or PIP */ | |
126 #define ERR_PH_B_RCV_UNSPEC (0x4d70) /* unspecified receive phase B error */ | |
127 #define ERR_PH_B_RCV_RSPREC (0x4d71) /* RSPREC receive error phase B */ | |
128 #define ERR_PH_B_RCV_COMREC (0x4d72) /* COMREC error in receive phase B */ | |
129 #define ERR_PH_B_RCV_EXP_PAGE_NOT_RCVD (0x4d73) /* T30 T2 timeout, expected page not received */ | |
130 #define ERR_PH_B_RCV_T1_TIMEOUT_AFTER_EOM_RCVD (0x4d74)/* T30 T1 timeout after EOM received */ | |
131 #define ERR_PH_C_RCV_UNSPEC (0x4d90) /* unspecified receive phase C error */ | |
132 #define ERR_PH_C_RCV_EOL_MISSING (0x4d91) /* missing EOL after 5 seconds (3.2/T4) */ | |
133 #define ERR_PH_C_RCV_DCE_TO_DTE_BUFFER_OVERFLOW (0x4d93)/* DCE to DTE buffer overflow */ | |
134 #define ERR_PH_C_RCV_BAD_CRC_OR_FRAME (0x4d94) /* bad crc or frame (ECM mode) */ | |
135 #define ERR_PH_D_RCV_UNSPEC (0x4da0) /* unspecified receive phase D error */ | |
136 #define ERR_PH_D_RCV_RSPREC_INVALID_RESP_RCVD (0x4da1)/* RSPREC invalid respones received */ | |
137 #define ERR_PH_D_RCV_COMREC_INVALID_RESP_RCVD (0x4da2)/* COMREC invalid respones received */ | |
138 #define ERR_PH_D_RCV_UNABLE_TO_CONT (0x4da3) /* unable to continue after PIN or PIP */ | |
139 #define ERR_PH_B_SND_RESERVED1 (0xcde0) /* reserved */ | |
140 #define ERR_PH_B_SND_RESERVED2 (0xcde1) /* reserved */ | |
141 #define ERR_PH_B_SND_RESERVED3 (0xcde2) /* reserved */ | |
142 #define ERR_PH_C_SND_RESERVED1 (0xcde3) /* reserved */ | |
143 #define ERR_PH_C_SND_RESERVED2 (0xcde4) /* reserved */ | |
144 #define ERR_PH_D_SND_RESERVED1 (0xcde5) /* reserved */ | |
145 #define ERR_PH_D_SND_RESERVED2 (0xcde6) /* reserved */ | |
146 #define ERR_PH_D_SND_RESERVED3 (0xcde7) /* reserved */ | |
147 #define ERR_PH_B_RCV_NO_RESP (0xcde8) /* T2 timeout, no response */ | |
148 #define ERR_PH_B_RCV_INVALID_RESP_RCVD (0xcde9) /* invalid respones received */ | |
149 #define ERR_PH_B_RCV_RESERVED3 (0xcdea) /* reserved */ | |
150 #define ERR_PH_C_RCV_RESERVED1 (0xcdeb) /* reserved */ | |
151 #define ERR_PH_C_RCV_RESERVED2 (0xcdec) /* reserved */ | |
152 #define ERR_PH_D_RCV_NO_RESP (0xcded) /* T2 timeout, no response */ | |
153 #define ERR_PH_D_RCV_INVALID_RESP_RCVD (0xcdee) /* invalid respones received */ | |
154 #define ERR_PH_D_RCV_RESERVED3 (0xcdef) /* reserved */ | |
155 #define ERR_SGN_NOT_ALLOWED (0xcdf0) /* signal not allowed */ | |
156 #define ERR_CCD_ENC (0xcdf1) /* CCD encoding error */ | |
157 | |
158 /* | |
159 * Value constants for VAL_test_mode | |
160 */ | |
161 #define TST_OFF (0x0) /* normal */ | |
162 #define TST_BCS (0x1) /* test BCS formatter only */ | |
163 #define TST_STUFF (0x2) /* stuffing/destuffing off */ | |
164 #define TST_FCS (0x4) /* FCS generating/checking off */ | |
165 #define TST_CTRL (0x8) /* Control checking off */ | |
166 #define TST_RTC (0x10) /* RTC checking off */ | |
167 #define TST_MIR (0x20) /* mirror report strings */ | |
168 #define TST_BUF (0x80) /* show contents of buffer */ | |
169 | |
170 /* | |
171 * Value constants for VAL_bitorder | |
172 */ | |
173 #define FBO_NRM_DATA (0x0) /* no change in bitorder for DATA frames */ | |
174 #define FBO_NRM_STATUS (0x0) /* no change in bitorder for STATUS frames */ | |
175 #define FBO_REV_DATA (0x1) /* reverse bitorder only for MSG frames */ | |
176 #define FBO_REV_STATUS (0x2) /* reverse bitorder only for STATUS frames */ | |
177 | |
178 /* | |
179 * Value constants for VAL_phase | |
180 */ | |
181 #define BCS_PHASE (0x0) /* Not a message phase */ | |
182 #define MSG_PHASE (0x1) /* Message phase (C) */ | |
183 | |
184 /* | |
185 * Value constants for VAL_dti_conn | |
186 */ | |
187 #define T30_DISCONNECT_DTI (0x0) /* Disconnect DTI from T30 */ | |
188 #define T30_CONNECT_DTI (0x1) /* Connect DTI to T30 */ | |
189 | |
190 /* | |
191 * Value constants for VAL_link_id | |
192 */ | |
193 #define T30_LINK_ID_DEFAULT (0x0) /* Default link id */ | |
194 | |
195 /* | |
196 * Value constants for VAL_dti_direction | |
197 */ | |
198 #define T30_DTI_NORMAL (0x0) /* DTI used normally */ | |
199 #define T30_DTI_INVERTED (0x1) /* DTI is inverted */ | |
200 | |
201 /* | |
202 * user defined constants | |
203 */ | |
204 #define CSI_LEN (0x14) | |
205 #define NSF_LEN (0x5a) | |
206 #define CIG_LEN (0x14) | |
207 #define NSC_LEN (0x5a) | |
208 #define TSI_LEN (0x14) | |
209 #define NSS_LEN (0x5a) | |
210 #define PWD_LEN (0x14) | |
211 #define SUB_LEN (0x14) | |
212 #define SEP_LEN (0x14) | |
213 #define T30_ENTITY_NAME_LEN (0x6) | |
214 | |
215 #include "CDG_LEAVE.h" | |
216 | |
217 | |
218 #endif |