FreeCalypso > hg > fc-magnetite
comparison doc/Freerunner-Howto @ 94:596d86109e44
initial round of documentation
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 03 Oct 2016 04:26:16 +0000 |
| parents | |
| children | 79cb194284ca |
comparison
equal
deleted
inserted
replaced
| 93:6475bde1b170 | 94:596d86109e44 |
|---|---|
| 1 Running FreeCalypso Magnetite firmware on the Neo Freerunner | |
| 2 ============================================================ | |
| 3 | |
| 4 Because FC Magnetite is essentially the same code as TCS211, it should function | |
| 5 identically to the standard moko12 (leo2moko-r1) firmware. If you would like | |
| 6 to try it, compile the fw image as described in the Compiling write-up and then | |
| 7 flash it with fc-loadtool like this: | |
| 8 | |
| 9 loadtool> flash erase 0 0x230000 | |
| 10 loadtool> flash program-bin 0 fwimage.bin | |
| 11 | |
| 12 That's all there is to it, folks - not much more to write here. |