FreeCalypso > hg > fc-magnetite

comparison src/aci2/aci/cmh_mms.c @ 3:93999a60b835

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
src/aci2, src/condat2: import of g23m/condat source pieces from TCS211
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Sep 2016 00:29:36 +0000
parents
children
comparison
equal deleted inserted replaced
2:c41a534f33c6 3:93999a60b835
1 /*
2 +-----------------------------------------------------------------------------
3 | Project : GSM-PS (6147)
4 | Modul : CMH_MMS
5 +-----------------------------------------------------------------------------
6 | Copyright 2002 Texas Instruments Berlin, AG
7 | All rights reserved.
8 |
9 | This file is confidential and a trade secret of Texas
10 | Instruments Berlin, AG
11 | The receipt of or possession of this file does not convey
12 | any rights to reproduce or disclose its contents or to
13 | manufacture, use, or sell anything it may describe, in
14 | whole, or in part, without the specific written consent of
15 | Texas Instruments Berlin, AG.
16 +-----------------------------------------------------------------------------
17 | Purpose : This module provides the set functions related to the
18 | protocol stack adapter for mobility management.
19 +-----------------------------------------------------------------------------
20 */
21
22 #ifndef CMH_MMS_C
23 #define CMH_MMS_C
24 #endif
25
26 #include "aci_all.h"
27
28 /*==== INCLUDES ===================================================*/
29 #include "aci_cmh.h"
30
31 #include "rtc.h"
32
33 #ifdef DTI
34 #include "dti.h" /* functionality of the dti library */
35 #include "dti_conn_mng.h"
36 #endif
37
38 #include "aci_mem.h"
39
40 #ifdef FAX_AND_DATA
41 /* #include "aci_fd.h" */
42 #endif /* of #ifdef FAX_AND_DATA */
43
44 #include "psa.h"
45 #include "psa_sim.h"
46 #include "psa_mm.h"
47 #include "cmh.h"
48 #include "cmh_sim.h"
49 #include "cmh_mm.h"
50
51 #include "psa_cc.h"
52 #include "cmh_cc.h"
53
54 #ifdef GPRS
55 #include "gaci.h"
56 #include "gaci_cmh.h"
57 #include "psa_gmm.h"
58 #include "cmh_gmm.h"
59 #endif
60
61 #ifndef _SIMULATION_
62 /***************************/
63 /* TEMPORARY until NVM */
64 /* just to get FFs !!!! */
65 #ifndef GPRS
66 #define DONT_LET_FFSH_DEF_GPRS
67 #endif
68
69 #include "ffs/ffs.h"
70
71 #include "rx.h"
72
73 #include "rtc.h"
74
75 #ifdef FF_TIMEZONE
76 #include "rv/rv_general.h"
77 #include "rtc/rtc_tz.h"
78 #endif
79
80 /* check whether latter has defined GPRS !!! */
81 #ifdef DONT_LET_FFSH_DEF_GPRS
82 #undef GPRS
83 #endif
84
85 #undef DONT_LET_FFSH_DEF_GPRS
86 /***************************/
87 #endif /* _SIMULATION_ */
88
89
90 /*==== CONSTANTS ==================================================*/
91
92 /*==== EXPORT =====================================================*/
93
94 /*==== VARIABLES ==================================================*/
95
96 /*==== FUNCTIONS ==================================================*/
97 EXTERN void wake_up_rr (void);
98
99 #ifndef _SIMULATION_
100 LOCAL void rx_Cb (drv_SignalID_Type *signal_params);
101 LOCAL UCHAR rx_sequence_Cb (void* arg);
102 #endif /* _SIMULATION_ */
103
104
105 /*
106 +--------------------------------------------------------------------+
107 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
108 | STATE : code ROUTINE : sAT_PercentBAND |
109 +--------------------------------------------------------------------+
110
111 PURPOSE : This is the functional counterpart to the %BAND AT command
112 which is responsible for configuring the way the mobile
113 deals with multiband.
114
115 <bandMode>: band switch mode.
116 <bandType>: band selection by user: coded in bitfield as following.
117 Bit set to 1 if band is set, 0 otherwise...
118
119 BITS: | 5 | 4 | 3 | 2 | 1 |
120 | GSM850 | E_GSM | GSM1900 | GSM1800 | GSM900 |
121 */
122
123 GLOBAL T_ACI_RETURN sAT_PercentBAND(T_ACI_CMD_SRC srcId,
124 T_ACI_BAND_MODE bandMode,
125 UBYTE bandType)
126 {
127 UBYTE ManufacturerBands;
128 UBYTE ubyte_dummy;
129
130 TRACE_FUNCTION("sAT_PercentBAND()");
131
132 /* check command source */
133 if(!cmh_IsVldCmdSrc (srcId))
134 {
135 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
136 return( AT_FAIL );
137 }
138
139 /* Check Parameter bandMode */
140 switch( bandMode )
141 {
142 case( BAND_MODE_Auto ):
143 bandType = 0x00; /* scan all */
144 break;
145
146 case( BAND_MODE_Manual ):
147 /* Check Parameter bandType */
148 cmhMM_getBandSettings(&ubyte_dummy, &ManufacturerBands);
149
150 if( !cmhMM_isBandAllowed(bandType, ManufacturerBands) )
151 {
152 TRACE_EVENT_P1("Band combination %d is not supported by this hardware", bandType);
153 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
154 return( AT_FAIL );
155 }
156 break;
157
158 default:
159 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
160 return( AT_FAIL );
161 }
162
163 if( !cmhMM_writeSetBand(bandType) )
164 return(AT_FAIL);
165
166 /* switch off radio */
167 if( CFUNfun EQ CFUN_FUN_Full )
168 {
169 /* if mobile is on, proceed a soft switch off
170 and then switch back on */
171 mmEntStat.curCmd = AT_CMD_BAND;
172
173 return( sAT_PlusCFUN( srcId,
174 CFUN_FUN_Disable_TX_RX_RF,
175 CFUN_RST_NotPresent) );
176 }
177 else
178 {
179 /* new configuration has been written to Flash and that's it ! */
180 return( AT_CMPL);
181 }
182 }
183
184 /*
185 +--------------------------------------------------------------------+
186 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
187 | STATE : code ROUTINE : sAT_PlusCOPS |
188 +--------------------------------------------------------------------+
189
190 PURPOSE : This is the functional counterpart to the +COPS AT command
191 which is responsible for selection and deselection of an
192 network operator.
193
194 <mode>: registration mode.
195 <format>: format of operator selection
196 <oper>: operator string
197 */
198
199 GLOBAL T_ACI_RETURN sAT_PlusCOPS ( T_ACI_CMD_SRC srcId,
200 T_ACI_COPS_MOD mode,
201 T_ACI_COPS_FRMT format,
202 CHAR * oper )
203 {
204
205 T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */
206
207
208 T_ACI_NRG_RGMD regMode; /*NRG Registration mode */
209 T_ACI_NRG_FRMT regFormat;
210 T_ACI_NRG_SVMD svrMode;
211
212
213 TRACE_FUNCTION ("sAT_PlusCOPS()");
214
215
216 pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
217 mmShrdPrm.COPSmodeBeforeAbort = mmShrdPrm.COPSmode;
218
219 /*
220 * check MM entity status
221 */
222 if( mmEntStat.curCmd NEQ AT_CMD_NONE )
223
224 return( AT_BUSY );
225
226
227 /*
228 *convert format to NRG type and set the COPS format value.
229 */
230
231
232 if( format EQ COPS_FRMT_NotPresent ) format = pMMCmdPrm -> COPSfrmt;
233
234
235 switch( format )
236 {
237 case( COPS_FRMT_NotPresent):
238 regFormat = NRG_FRMT_NotPresent;
239 break;
240 case( COPS_FRMT_Numeric ):
241 regFormat =NRG_FRMT_Numeric ;
242 break;
243 case( COPS_FRMT_Short):
244 regFormat = NRG_FRMT_Short;
245 break;
246 case( COPS_FRMT_Long):
247 regFormat = NRG_FRMT_Long;
248 break;
249 default:
250 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
251 return( AT_FAIL );
252 }
253
254 pMMCmdPrm -> COPSfrmt = format;
255
256
257
258 /*
259 * The function cmhMM_OperatorSelect() is using the NRG types. Therefore the following conversion is required.
260 * Also the appropiate value for Service Mode, required by cmhMM_OperatorSelect(), is set.
261 */
262
263
264 if( mode EQ COPS_MOD_NotPresent ) mode = mmShrdPrm.COPSmode;
265
266 switch( mode )
267 {
268 case( COPS_MOD_NotPresent ):
269 regMode = NRG_RGMD_NotPresent;
270 svrMode = NRG_SVMD_NotPresent;
271 break;
272 case( COPS_MOD_Auto ):
273 regMode =NRG_RGMD_Auto ;
274 svrMode = NRG_SVMD_Full; /* Only Full Service makes sense for Automatic Mode */
275 break;
276 case( COPS_MOD_Man):
277 regMode = NRG_RGMD_Manual;
278 svrMode = NRG_SVMD_Full; /* Only Full Service makes sense for Manual Mode */
279 break;
280 case( COPS_MOD_Dereg):
281 regMode = NRG_RGMD_Dereg;
282 svrMode = NRG_SVMD_Limited;
283 break;
284 case( COPS_MOD_Both ):
285 regMode = NRG_RGMD_Both;
286 svrMode = NRG_SVMD_Full; /* Only Full Service makes sense for the Both Mode */
287 break;
288 case(COPS_MOD_SetOnly): /*This mode can be fully handled in this function */
289 /* DO NOT SET mmShrdPrm.COPSmode !!! */
290 pMMCmdPrm -> COPSfrmt = format;
291 return AT_CMPL;
292 default:
293 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
294 return( AT_FAIL );
295 }
296
297 mmShrdPrm.COPSmode = mode;
298
299
300
301 /*Set the value of the current command executed */
302 mmEntStat.curCmd = AT_CMD_COPS;
303
304 return cmhMM_OperatorSelect(srcId,regMode,svrMode,regFormat,oper);
305
306 }
307
308
309 /*
310 +--------------------------------------------------------------------+
311 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
312 | STATE : code ROUTINE : sAT_PercentCOPS |
313 +--------------------------------------------------------------------+
314
315 PURPOSE : This is the functional counterpart to the %COPS AT command
316 which is responsible for selection and deselection of an
317 network operator. %COPS will add, in principle,
318 the following functionality to the standard AT command +COPS:
319
320 -Possibility to query the "service status" in which the phone is currently registered;
321 the possible values will be "full service", "limited service" or "no service".
322 -Possibility to select the "last registered" operator using %COPS=1.
323
324
325 <mode>: registration mode.
326 <format>: format of operator selection
327 <oper>: operator string
328 */
329
330 GLOBAL T_ACI_RETURN sAT_PercentCOPS ( T_ACI_CMD_SRC srcId,
331 T_ACI_COPS_MOD mode,
332 T_ACI_COPS_FRMT format,
333 CHAR * oper )
334 {
335
336 T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */
337
338
339 T_ACI_NRG_RGMD regMode; /*NRG Registration mode */
340 T_ACI_NRG_FRMT regFormat;
341 T_ACI_NRG_SVMD svrMode;
342
343
344 TRACE_FUNCTION ("sAT_PercentCOPS()");
345
346
347 pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
348 mmShrdPrm.COPSmodeBeforeAbort = mmShrdPrm.COPSmode;
349
350 /*
351 * check MM entity status
352 */
353 if( mmEntStat.curCmd NEQ AT_CMD_NONE )
354
355 return( AT_BUSY );
356
357
358 /*
359 *-------------------------------------------------------------------
360 * convert format to NRG type
361 *-------------------------------------------------------------------
362 */
363
364
365 if( format EQ COPS_FRMT_NotPresent ) format = pMMCmdPrm -> COPSfrmt;
366
367
368 switch( format )
369 {
370 case( COPS_FRMT_NotPresent):
371 regFormat = NRG_FRMT_NotPresent;
372 break;
373 case( COPS_FRMT_Numeric ):
374 regFormat =NRG_FRMT_Numeric ;
375 break;
376 case( COPS_FRMT_Short):
377 regFormat = NRG_FRMT_Short;
378 break;
379 case( COPS_FRMT_Long):
380 regFormat = NRG_FRMT_Long;
381 break;
382 default:
383 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
384 return( AT_FAIL );
385 }
386
387 pMMCmdPrm -> COPSfrmt = format;
388
389
390 /*
391 * The function cmhMM_OperatorSelect() is using the NRG types. Therefore the following conversion is required.
392 * Also the appropiate value for Service Mode, required by cmhMM_OperatorSelect(), is set.
393 */
394
395
396 if( mode EQ COPS_MOD_NotPresent ) mode = mmShrdPrm.COPSmode;
397
398 switch( mode )
399 {
400 case( COPS_MOD_NotPresent ):
401 regMode = NRG_RGMD_NotPresent;
402 svrMode = NRG_SVMD_NotPresent;
403 break;
404 case( COPS_MOD_Auto ):
405 regMode =NRG_RGMD_Auto ;
406 svrMode = NRG_SVMD_Full;
407 break;
408 case( COPS_MOD_Man):
409 regMode = NRG_RGMD_Manual;
410 svrMode = NRG_SVMD_Full;
411 break;
412 case( COPS_MOD_Dereg):
413 regMode = NRG_RGMD_Dereg;
414 svrMode = NRG_SVMD_Limited;
415 break;
416 case( COPS_MOD_Both ):
417 regMode = NRG_RGMD_Both;
418 svrMode = NRG_SVMD_Full;
419 break;
420 case(COPS_MOD_SetOnly): /*This mode can be fully handled in this function */
421 /* DO NOT SET mmShrdPrm.COPSmode !!! */
422 pMMCmdPrm -> COPSfrmt = format;
423 return AT_CMPL;
424 default:
425 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
426 return( AT_FAIL );
427 }
428
429 mmShrdPrm.COPSmode = mode;
430
431
432
433
434 /* Set the value of the current command executed */
435 mmEntStat.curCmd = AT_CMD_P_COPS;
436
437 return cmhMM_OperatorSelect(srcId,regMode,svrMode,regFormat,oper);
438
439 }
440
441 /*
442 +--------------------------------------------------------------------+
443 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
444 | STATE : code ROUTINE : sAT_PlusWS46 |
445 +--------------------------------------------------------------------+
446
447 PURPOSE : This is the functional counterpart to the +WS46 AT
448 command which is responsible to select wireless network.
449
450 <mode>: network mode.
451 */
452
453 GLOBAL T_ACI_RETURN sAT_PlusWS46 (T_ACI_CMD_SRC srcId,
454 T_ACI_WS46_MOD mode )
455 {
456
457 TRACE_FUNCTION ("sAT_PlusWS46()");
458
459 /*
460 *-------------------------------------------------------------------
461 * process the value parameter
462 *-------------------------------------------------------------------
463 */
464 if( mode NEQ ACI_NumParmNotPresent )
465 {
466 if( mode NEQ WS46_MOD_Gsm )
467 {
468 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
469 return( AT_FAIL );
470 }
471 }
472
473 return( AT_CMPL );
474 }
475
476
477
478 /*
479 +--------------------------------------------------------------------+
480 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
481 | STATE : code ROUTINE : tAT_PercentALS |
482 +--------------------------------------------------------------------+
483
484 PURPOSE : This is the functional counterpart to the %ALS AT command
485 which is responsible for testing if ALS mode is present.
486 (always if an E-Plus Sim-card is detected or the if the CSP
487 field is present on the inserted Sim-card and enables
488 ALS mode).
489
490
491 */
492 GLOBAL T_ACI_RETURN tAT_PercentALS ( T_ACI_CMD_SRC srcId, T_ACI_ALS_MOD *ALSmode )
493
494 {
495 TRACE_FUNCTION ("tAT_PercentALS()");
496
497 if( !cmh_IsVldCmdSrc( srcId ) )
498 {
499 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
500 return( AT_FAIL );
501 }
502
503 #if defined(FF_BAT) && defined(_SIMULATION_)
504 /* test command %ALS is not used anymore by BAT.lib, change CMD MODE only for host tests */
505 if(aci_cmd_src_mode_get(srcId) EQ CMD_MODE_BAT)
506 {
507 aci_cmd_src_mode_set((UBYTE)srcId, CMD_MODE_ATI);
508 }
509 #endif /* FF_BAT && _SIMULATION_ */
510
511 /* E-Plus SIM-Card inserted (mcc=0x262, mnc=0x03) ? */
512 if (cmhSIM_plmn_is_hplmn(0x262, 0x03F))
513 {
514 *ALSmode = ALS_MOD_SPEECH | ALS_MOD_AUX_SPEECH;
515 return (AT_CMPL);
516 }
517
518 simEntStat.curCmd = AT_CMD_ALS;
519 simEntStat.entOwn = simShrdPrm.owner = srcId;
520
521 ccShrdPrm.als_cmd = ALS_CMD_TEST;
522 *ALSmode = ALS_MOD_NOTPRESENT;
523
524 cmhCC_checkALS_Support();
525 return (AT_EXCT);
526 }
527
528
529
530 /*
531 +--------------------------------------------------------------------+
532 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
533 | STATE : code ROUTINE : sAT_PercentNRG |
534 +--------------------------------------------------------------------+
535
536 PURPOSE : This is the functional counterpart to the %NRG AT command
537 which is responsible for the setting of registration mode
538 and service mode.
539
540 <regMode>: registration mode.
541 <srvMode>: service mode.
542 */
543
544 GLOBAL T_ACI_RETURN sAT_PercentNRG( T_ACI_CMD_SRC srcId,
545 T_ACI_NRG_RGMD regMode,
546 T_ACI_NRG_SVMD srvMode,
547 T_ACI_NRG_FRMT oprFrmt,
548 CHAR *opr)
549 {
550 T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */
551
552
553 TRACE_FUNCTION ("sAT_PercentNRG()");
554
555
556 pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
557
558
559 /*
560 *-------------------------------------------------------------------
561 * check MM entity status
562 *-------------------------------------------------------------------
563 */
564 if( mmEntStat.curCmd NEQ AT_CMD_NONE )
565
566 return( AT_BUSY );
567
568
569
570
571 /*
572 *-------------------------------------------------------------------
573 * process the oprFrmt,svrMode and regMode parameters
574 *-------------------------------------------------------------------
575 */
576 switch( oprFrmt )
577 {
578 case( NRG_FRMT_NotPresent ):
579 oprFrmt = pMMCmdPrm -> NRGoprFrmt;
580 break;
581 case( NRG_FRMT_Long ):
582 case( NRG_FRMT_Short ):
583 case( NRG_FRMT_Numeric ):
584 break;
585 default:
586 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
587 return( AT_FAIL );
588 }
589
590 if( srvMode EQ NRG_SVMD_NotPresent )
591 srvMode=pMMCmdPrm->NRGregMode;
592
593 if( regMode EQ NRG_RGMD_NotPresent )
594 regMode=pMMCmdPrm->NRGregMode;
595
596
597
598 /* Set the value of the current command executed */
599 mmEntStat.curCmd = AT_CMD_NRG;
600
601
602 return cmhMM_OperatorSelect(srcId,regMode,srvMode,oprFrmt,opr);
603 }
604
605 /*
606 +--------------------------------------------------------------------+
607 | PROJECT : ACI/MMI MODULE : CMH_MMS |
608 | STATE : code ROUTINE : sAT_PercentCSQ |
609 +--------------------------------------------------------------------+
610
611 PURPOSE : This is the function for Signal Quality
612 Param:
613 srcId: command ID;
614 CSQmode: enable(1) or disable(0) CSQ
615
616 Shen,Chao
617 Juni.13th, 2003
618 */
619
620 GLOBAL T_ACI_RETURN sAT_PercentCSQ( T_ACI_CMD_SRC srcId,
621 T_ACI_CSQ_MODE CSQmode)
622 {
623
624 T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */
625
626 if( !cmh_IsVldCmdSrc( srcId ) )
627 {
628 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
629 return( AT_FAIL );
630 }
631
632 pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
633
634 switch(CSQmode)
635 {
636 case( CSQ_Enable):
637 {
638 if ( pMMCmdPrm->CSQworkStat == CSQ_Enable )
639 {
640 TRACE_EVENT("CSQ is already enabled");
641 }
642 else
643 {
644 cmhPrm[srcId].mmCmdPrm.CSQworkStat = CSQ_Enable;
645 if( (pMMCmdPrm->sIndicationParam.sMmCINDSettings.sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) &&
646 (pMMCmdPrm->sIndicationParam.sMmCMERSettings.sCmerIndParam != CMER_INDICATOR_2) )
647 { /* rx_Init() not yet called from CIND service */
648 #ifndef _SIMULATION_
649 rx_Init(rx_Cb);
650 #endif /* _SIMULATION_ */
651 }
652 }
653 break;
654 }
655
656 case(CSQ_Disable):
657 {
658 if ( pMMCmdPrm->CSQworkStat == CSQ_Enable )
659 {
660 cmhPrm[srcId].mmCmdPrm.CSQworkStat = CSQ_Disable;
661 if( (pMMCmdPrm->sIndicationParam.sMmCINDSettings.sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) &&
662 (pMMCmdPrm->sIndicationParam.sMmCMERSettings.sCmerIndParam != CMER_INDICATOR_2) )
663 { /* CIND service inactive -> no more reading the signal strength necessary */
664 #ifndef _SIMULATION_
665 rx_Init(NULL);
666 #endif /* _SIMULATION_ */
667 }
668 }
669 break;
670 }
671 default:
672 return(AT_FAIL);
673 }
674 return( AT_CMPL);
675 }
676
677
678 /*
679 +--------------------------------------------------------------------+
680 | PROJECT : ACI/MMI MODULE : CMH_MMS |
681 | STATE : code ROUTINE : sAT_Plus CIND |
682 +--------------------------------------------------------------------+
683
684 PURPOSE : This is the function to setup the indications toward
685 terminal
686 */
687
688 GLOBAL T_ACI_RETURN sAT_PlusCIND( T_ACI_CMD_SRC srcId,
689 T_ACI_CIND_SIGNAL_TYPE sCindSgnalSettings,
690 T_ACI_CIND_SMSFULL_TYPE sCindSmsFullSettings )
691 {
692 T_ACI_MM_CIND_VAL_TYPE *pMMCindPrm;
693 T_ACI_MM_CMER_VAL_TYPE *pMMCmerPrm;
694 T_ACI_CIND_SIGNAL_TYPE sOldSignalSetting;
695 T_ACI_CIND_SMSFULL_TYPE sOldSmsFullSetting;
696
697 TRACE_EVENT( "sAT_PlusCIND()" );
698
699 if( !cmh_IsVldCmdSrc( srcId ) )
700 {
701 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
702 return( AT_FAIL );
703 }
704
705 pMMCindPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings);
706 pMMCmerPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings);
707
708 if( sCindSgnalSettings == CIND_SIGNAL_INDICATOR_INVALID ||
709 sCindSmsFullSettings == CIND_SMSFULL_INDICATOR_INVALID )
710 {
711 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
712 return( AT_FAIL );
713 }
714
715 sOldSignalSetting = pMMCindPrm->sCindSignalParam;
716 sOldSmsFullSetting = pMMCindPrm->sCindSmsFullParam;
717 pMMCindPrm->sCindSignalParam = sCindSgnalSettings;
718 pMMCindPrm->sCindSmsFullParam = sCindSmsFullSettings;
719
720 /* ----------------- signal strength setting part ------------------------ */
721 if( sOldSignalSetting <= CIND_SIGNAL_INDICATOR_LVL0 )
722 { /* the old (previews) signal setting is off */
723 if( (sCindSgnalSettings > CIND_SIGNAL_INDICATOR_LVL0) &&
724 (cmhPrm[srcId].mmCmdPrm.CSQworkStat == CSQ_Disable) &&
725 (pMMCmerPrm->sCmerIndParam != CMER_INDICATOR_2) )
726 { /* greather LVL0 --> rx_Init must be initialize... */
727 #ifndef _SIMULATION_
728 rx_Init(rx_Cb);
729 #endif /* _SIMULATION_ */
730 }
731 }
732 else
733 { /* the old (previews) signal setting is on */
734 if( (sCindSgnalSettings == CIND_SIGNAL_INDICATOR_LVL0) &&
735 (cmhPrm[srcId].mmCmdPrm.CSQworkStat == CSQ_Disable) &&
736 (pMMCmerPrm->sCmerIndParam != CMER_INDICATOR_2) )
737 { /* LVL0 --> rx_Init must be reset... */
738 #ifndef _SIMULATION_
739 rx_Init(NULL);
740 #endif /* _SIMULATION_ */
741 }
742 }
743 return(AT_CMPL);
744 }
745
746 /*
747 +--------------------------------------------------------------------+
748 | PROJECT : ACI/MMI MODULE : CMH_MMS |
749 | STATE : code ROUTINE : sAT_Plus CMER |
750 +--------------------------------------------------------------------+
751
752 PURPOSE : This is the function to setup the buffer control for the
753 indications toward terminal equipment
754 */
755
756 GLOBAL T_ACI_RETURN sAT_PlusCMER( T_ACI_CMD_SRC srcId,
757 T_ACI_CMER_MODE_TYPE sCmerModeSettings,
758 T_ACI_CMER_IND_TYPE sCmerIndicationSettings,
759 T_ACI_CMER_BFR_TYPE sCmerBfrSettings )
760 {
761 T_ACI_MM_CMER_VAL_TYPE *pMMCmerPrm;
762 T_ACI_MM_CIND_VAL_TYPE *pMMCindPrm;
763 T_ACI_CMER_IND_TYPE sOldCmerIndSetting;
764
765 TRACE_EVENT( "sAT_PlusCMER()" );
766
767 if( !cmh_IsVldCmdSrc( srcId ) )
768 {
769 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
770 return( AT_FAIL );
771 }
772
773 pMMCmerPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings);
774 pMMCindPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings);
775
776 sOldCmerIndSetting = pMMCmerPrm->sCmerIndParam;
777 if( sCmerModeSettings != CMER_MODE_INVALID )
778 {
779 pMMCmerPrm->sCmerModeParam = sCmerModeSettings;
780 }
781 if( sCmerIndicationSettings != CMER_INDICATOR_INVALID )
782 {
783 pMMCmerPrm->sCmerIndParam = sCmerIndicationSettings;
784 }
785 if( sCmerBfrSettings != CMER_BFR_INVALID )
786 {
787 pMMCmerPrm->sCmerBfrParam = sCmerBfrSettings;
788 }
789
790 /* ---------------- maybe switch on all indication settings ------------- */
791 if( sOldCmerIndSetting != CMER_INDICATOR_2 )
792 { /* the old (previews) indicator setting is 'off' */
793 if( (sCmerIndicationSettings == CMER_INDICATOR_2) &&
794 (cmhPrm[srcId].mmCmdPrm.CSQworkStat == CSQ_Disable) &&
795 (pMMCindPrm->sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) )
796 { /* all indications must be show --> rx_Init must be initialize... */
797 #ifndef _SIMULATION_
798 rx_Init(rx_Cb);
799 #endif /* _SIMULATION_ */
800 }
801 }
802 else
803 { /* the old (previews) signal setting is on */
804 if( (sCmerIndicationSettings != CMER_INDICATOR_2) &&
805 (cmhPrm[srcId].mmCmdPrm.CSQworkStat == CSQ_Disable) &&
806 (pMMCindPrm->sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) )
807 { /* LVL0 --> rx_Init must be reset... */
808 #ifndef _SIMULATION_
809 rx_Init(NULL);
810 #endif /* _SIMULATION_ */
811 }
812 }
813
814 return(AT_CMPL);
815 }
816
817
818 /*
819 +--------------------------------------------------------------------+
820 | PROJECT : ACI/MMI MODULE : CMH_MMS |
821 | STATE : code ROUTINE : sAT_PercentCSQ |
822 +--------------------------------------------------------------------+
823
824 PURPOSE : This is the callback function for Signal Quality
825 Param:
826 signal_params callback function name
827
828 Shen,Chao
829 Juni.13th, 2003
830 */
831
832 #ifndef _SIMULATION_
833 LOCAL void rx_Cb (drv_SignalID_Type *signal_params)
834 {
835 rx_Status_Type *para = NULL;
836
837 TRACE_EVENT("rx_Cb()");
838
839 ACI_MALLOC(para,sizeof(rx_Status_Type));
840
841 para->actLevel = ((rx_Status_Type *) signal_params->UserData)->actLevel;
842 para->gsmLevel = ((rx_Status_Type *) signal_params->UserData)->gsmLevel;
843 para->rxQuality = ((rx_Status_Type *) signal_params->UserData)->rxQuality;
844
845 if (!cmh_set_delayed_call (rx_sequence_Cb, (void *)para))
846 {
847 TRACE_EVENT("Error, can not set the delayed resequence callback for %CSQ");
848 ACI_MFREE(para);
849 return ;
850 }
851
852 TRACE_EVENT("delayed requence call back requested: 100 ms");
853 cmh_start_delayed_call (20);
854
855 return;
856
857 }
858 #endif /* _SIMULATION_ */
859
860 /*
861 +--------------------------------------------------------------------+
862 | PROJECT : ACI/MMI MODULE : CMH_MMS |
863 | STATE : code ROUTINE : sAT_PercentCSQ |
864 +--------------------------------------------------------------------+
865
866 PURPOSE : This is the delayed callback function for Signal Quality
867 Shen,Chao
868 Juni.13th, 2003
869 */
870 #ifndef _SIMULATION_
871 LOCAL UCHAR rx_sequence_Cb (void* arg)
872 {
873 int i;
874 UBYTE rssi;
875 UBYTE ber;
876 T_ACI_CIND_SIGNAL_TYPE sSignalStrength;
877 T_ACI_MM_CIND_VAL_TYPE sIndValues;
878
879 struct rx_Status_Type* tmp_p = (struct rx_Status_Type*) arg;
880
881 TRACE_EVENT("rx_sequence_Cb()");
882
883 sIndValues.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_INVALID;
884
885 if ( tmp_p->gsmLevel EQ 0xFF OR tmp_p->gsmLevel EQ 0 )
886 {
887 rssi = ACI_RSSI_FAULT;
888 sSignalStrength = CIND_SIGNAL_INDICATOR_LVL0;
889 }
890 else if ( tmp_p->gsmLevel > 59 )
891 {
892 rssi = 31;
893 }
894 else
895 {
896 rssi = ( tmp_p->gsmLevel / 2 ) + 2;
897 }
898
899 if ( tmp_p->rxQuality EQ RX_QUAL_UNAVAILABLE )
900 {
901 ber = ACI_BER_FAULT;
902 }
903 else
904 {
905 ber = tmp_p->rxQuality;
906 }
907
908 for( i = CMD_SRC_LCL; i < CMD_SRC_MAX; i++)
909 {
910 if (cmhPrm[i].mmCmdPrm.CSQworkStat EQ CSQ_Enable)
911 {
912 R_AT (RAT_CSQ, i) (rssi,ber,tmp_p->actLevel);
913 }
914 /* ==================== process the service of +CIEV ========================== */
915 sSignalStrength = CIND_SIGNAL_INDICATOR_LVL0;
916 if( tmp_p->gsmLevel >= 11 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL1; };
917 if( tmp_p->gsmLevel >= 21 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL2; };
918 if( tmp_p->gsmLevel >= 32 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL3; };
919 if( tmp_p->gsmLevel >= 42 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL4; };
920 if( tmp_p->gsmLevel >= 52 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL5; };
921 sIndValues.sCindSignalParam = sSignalStrength;
922 sIndValues.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_INVALID;
923 if( ((cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam > CIND_SIGNAL_INDICATOR_LVL0) &&
924 (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam >= sIndValues.sCindSignalParam) &&
925 (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings.sCmerIndParam == CMER_INDICATOR_2)) ||
926 ((cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam < sIndValues.sCindSignalParam) &&
927 (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings.sCmerIndParam == CMER_INDICATOR_1)) )
928 {
929 TRACE_EVENT("send +CIEV");
930 R_AT (RAT_CIEV, i) ( sIndValues, cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings );
931 }
932 }
933
934 if (!cmh_set_delayed_call (NULL, NULL))
935 { /* reset this callback pointer -> will be set again via rx_Cb */
936 TRACE_EVENT("Can not reset the delayed resequence callback for %CSQ");
937 return FALSE;
938 }
939 ACI_MFREE(tmp_p);
940
941 return TRUE;
942 }
943 #endif /* _SIMULATION_ */
944
945 /*
946 +--------------------------------------------------------------------+
947 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
948 | STATE : code ROUTINE : sAT_PercentCHPL |
949 +--------------------------------------------------------------------+
950
951 PURPOSE : This is the functional counterpart to the %CHPL AT command
952 which will return the list of entries in EF_HPLMNwAcT.
953
954 <mode>: registration mode.
955 <format>: format of operator selection
956 <oper>: operator string
957 */
958
959 GLOBAL T_ACI_RETURN sAT_PercentCHPL ( T_ACI_CMD_SRC srcId,
960 T_ACI_OPER_NTRY *oper )
961 {
962 T_OPER_ENTRY plmnDesc;
963 BOOL found;
964 SHORT mccBuf;
965 SHORT mncBuf;
966
967 TRACE_FUNCTION ("sAT_PlusCHPL()");
968
969 /*
970 *-------------------------------------------------------------------
971 * check whether SIM is ready
972 *-------------------------------------------------------------------
973 */
974 if (!cmhSMS_checkSIM ())
975 {
976 return AT_FAIL;
977 }
978
979 /*
980 *-------------------------------------------------------------------
981 * check command source
982 *-------------------------------------------------------------------
983 */
984 if(!cmh_IsVldCmdSrc (srcId))
985 {
986 TRACE_EVENT_P1("sAT_PercentCHPL(): Invalid source: %d", srcId);
987 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
988 return( AT_FAIL );
989 }
990 if(!cmhMM_GetActingHPLMN(&mccBuf, &mncBuf))/* Enhancement Acting HPLMN*/
991 {
992 cmhSIM_GetHomePLMN (&mccBuf, &mncBuf);
993 }
994
995 found = cmhMM_FindPLMN (&plmnDesc, mccBuf, mncBuf, NOT_PRESENT_16BIT, FALSE);
996 if (!found)
997 {
998 TRACE_EVENT_P2("sAT_PercentCHPL(): MCC/MN not found in database (0x%X, 0x%X", mccBuf, mncBuf);
999 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal);
1000 return( AT_FAIL );
1001 }
1002
1003 strcpy (oper->longName, plmnDesc.longName);
1004 strcpy (oper->shrtName, plmnDesc.shrtName);
1005 oper->mcc = plmnDesc.mcc;
1006 oper->mnc = plmnDesc.mnc;
1007 oper->pnn = plmnDesc.pnn;
1008 oper->long_len = plmnDesc.long_len;
1009 oper->shrt_len = plmnDesc.shrt_len;
1010
1011 return (AT_CMPL);
1012 }
1013
1014 /*
1015 +--------------------------------------------------------------------+
1016 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
1017 | STATE : code ROUTINE : sAT_PlusCTZR |
1018 +--------------------------------------------------------------------+
1019
1020 PURPOSE : This is the functional counterpart to the +CTZR AT command
1021 which will set the status of CTZRmode, indicating whether time
1022 zone change rep[orting is enabled or disabled.
1023
1024 <on/off>: Indicates whether time zone reporting is enabled or disabled.
1025 */
1026
1027 GLOBAL T_ACI_RETURN sAT_PlusCTZR ( T_ACI_CMD_SRC srcId,
1028 T_ACI_CTZR_MODE mode)
1029 {
1030 TRACE_FUNCTION ("sAT_PlusCTZR()");
1031
1032 /*
1033 *-------------------------------------------------------------------
1034 * check command source
1035 *-------------------------------------------------------------------
1036 */
1037 if(!cmh_IsVldCmdSrc (srcId))
1038 {
1039 TRACE_EVENT_P1("sAT_PlusCTZR(): Invalid source: %d", srcId);
1040 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1041 return( AT_FAIL );
1042 }
1043
1044 /*
1045 *-------------------------------------------------------------------
1046 * process the mode parameter
1047 *-------------------------------------------------------------------
1048 */
1049 switch (mode)
1050 {
1051 case CTZR_MODE_OFF:
1052 case CTZR_MODE_ON:
1053 cmhPrm[srcId].mmCmdPrm.CTZRMode = mode;
1054 break;
1055
1056 default:
1057 TRACE_EVENT_P1("sAT_PlusCTZR(): Invalid mode: %d", mode);
1058 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1059 return( AT_FAIL );
1060 }
1061
1062 return( AT_CMPL );
1063 }
1064
1065
1066 /*
1067 +--------------------------------------------------------------------+
1068 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
1069 | STATE : code ROUTINE : sAT_PlusCTZU |
1070 +--------------------------------------------------------------------+
1071
1072 PURPOSE : This is the functional counterpart to the +CTZU AT command
1073 which will set the status of CTZUmode, indicating whether automatic time
1074 zone update is enabled or disabled.
1075
1076 <on/off>: Indicates whether automatic time zone update is enabled or disabled.
1077 */
1078
1079 GLOBAL T_ACI_RETURN sAT_PlusCTZU ( T_ACI_CMD_SRC srcId,
1080 T_ACI_CTZU_MODE mode)
1081 {
1082 TRACE_FUNCTION ("sAT_PlusCTZU()");
1083
1084 /*
1085 *-------------------------------------------------------------------
1086 * check command source
1087 *-------------------------------------------------------------------
1088 */
1089 if(!cmh_IsVldCmdSrc (srcId))
1090 {
1091 TRACE_EVENT_P1("sAT_PlusCTZU(): Invalid source: %d", srcId);
1092 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1093 return( AT_FAIL );
1094 }
1095
1096 /*
1097 *-------------------------------------------------------------------
1098 * process the mode parameter
1099 *-------------------------------------------------------------------
1100 */
1101 switch (mode)
1102 {
1103 case CTZU_MODE_OFF:
1104 case CTZU_MODE_ON:
1105 cmhPrm[srcId].mmCmdPrm.CTZUMode = mode;
1106 break;
1107
1108 default:
1109 TRACE_EVENT_P1("sAT_PlusCTZU(): Invalid mode: %d", mode);
1110 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1111 return( AT_FAIL );
1112 }
1113
1114 return( AT_CMPL );
1115 }
1116
1117
1118 /*
1119 +--------------------------------------------------------------------+
1120 | PROJECT : MODULE : CMH_MMS |
1121 | STATE : code ROUTINE : sAT_PlusCCLK |
1122 +--------------------------------------------------------------------+
1123
1124 PURPOSE : This is the functional counterpart to the +CCLK AT command
1125 which will set the real time clock of the ME
1126 */
1127
1128 GLOBAL T_ACI_RETURN sAT_PlusCCLK ( T_ACI_CMD_SRC srcId,
1129 T_ACI_RTC_DATE *date_s,
1130 T_ACI_RTC_TIME *time_s,
1131 int timeZone
1132 )
1133 {
1134 #ifndef _SIMULATION_
1135 UBYTE ret;
1136 #endif /* _SIMULATION_ */
1137
1138 TRACE_FUNCTION ("sAT_PlusCCLK()");
1139
1140 /*
1141 *-------------------------------------------------------------------
1142 * check command source
1143 *-------------------------------------------------------------------
1144 */
1145 if(!cmh_IsVldCmdSrc (srcId))
1146 {
1147 TRACE_EVENT_P1("sAT_PlusCCLK(): Invalid source: %d", srcId);
1148 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1149 return( AT_FAIL );
1150 }
1151
1152 /*
1153 *-------------------------------------------------------------------
1154 * Set the time in the RTC
1155 *-------------------------------------------------------------------
1156 */
1157 #ifndef _SIMULATION_
1158 ret = rtc_set_time_date( (T_RTC_DATE *) date_s, (T_RTC_TIME *) time_s);
1159
1160 switch (ret)
1161 {
1162 case 0: /* RVF_OK. Date and time set ok*/
1163 #ifndef FF_TIMEZONE
1164 return( AT_CMPL );
1165 #else /* FF_TIMEZONE */
1166 ret = RTC_SetCurrentTZ(timeZone); /* Set current timezone now time and date are set.*/
1167 switch (ret)
1168 {
1169 case 0: /* RVF_OK. RTC current TZ set ok*/
1170 return( AT_CMPL );
1171
1172 default:
1173 TRACE_EVENT_P1("sAT_PlusCCLK(): ERROR1: %d", ret); /* RTC setting failed */
1174 return( AT_FAIL );
1175 }
1176 #endif /* FF_TIMEZONE */
1177
1178 default: /* RVF_NOT_READY or RVF_INTERNAL ERROR or RVF_INVALID_PARAMETER */
1179 TRACE_EVENT_P1("sAT_PlusCCLK(): ERROR2: %d", ret); /* Date and time setting failed */
1180 return( AT_FAIL );
1181 }
1182 #else /* _SIMULATION_ */
1183 return( AT_CMPL );
1184 #endif /* _SIMULATION_ */
1185
1186 }
1187
1188 /*
1189 +--------------------------------------------------------------------+
1190 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
1191 | STATE : code ROUTINE : sAT_PercentCTZV |
1192 +--------------------------------------------------------------------+
1193
1194 PURPOSE : This is the functional counterpart to the %CTZV AT command
1195 which will set the status of PCTZVmode, indicating whether time and date report
1196 is enabled or disabled.
1197
1198 <on/off>: Indicates whether time and date report is enabled or disabled.
1199 */
1200
1201 GLOBAL T_ACI_RETURN sAT_PercentCTZV ( T_ACI_CMD_SRC srcId,
1202 T_ACI_PCTZV_MODE mode)
1203 {
1204 TRACE_FUNCTION ("sAT_PercentCTZV()");
1205
1206 /*
1207 *-------------------------------------------------------------------
1208 * check command source
1209 *-------------------------------------------------------------------
1210 */
1211 if(!cmh_IsVldCmdSrc (srcId))
1212 {
1213 TRACE_EVENT_P1("sAT_PercentCTZV(): Invalid source: %d", srcId);
1214 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1215 return( AT_FAIL );
1216 }
1217
1218 /*
1219 *-------------------------------------------------------------------
1220 * process the mode parameter
1221 *-------------------------------------------------------------------
1222 */
1223 switch (mode)
1224 {
1225 case PCTZV_MODE_OFF:
1226 case PCTZV_MODE_ON:
1227 cmhPrm[srcId].mmCmdPrm.PCTZVMode = mode;
1228 break;
1229
1230 default:
1231 TRACE_EVENT_P1("sAT_PercentCTZV(): Invalid mode: %d", mode);
1232 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1233 return( AT_FAIL );
1234 }
1235
1236 return( AT_CMPL );
1237 }
1238
1239
1240 /*
1241 +--------------------------------------------------------------------+
1242 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
1243 | STATE : code ROUTINE : sAT_PercentCNIV |
1244 +--------------------------------------------------------------------+
1245
1246 PURPOSE : This is the functional counterpart to the %CNIV AT command
1247 which will set the status of CNIVmode, indicating whether time and date report
1248 is enabled or disabled.
1249
1250 <on/off>: Indicates whether time and date report is enabled or disabled.
1251 */
1252
1253 GLOBAL T_ACI_RETURN sAT_PercentCNIV ( T_ACI_CMD_SRC srcId,
1254 T_ACI_CNIV_MODE mode)
1255 {
1256 TRACE_FUNCTION ("sAT_PercentCNIV()");
1257
1258 /*
1259 *-------------------------------------------------------------------
1260 * check command source
1261 *-------------------------------------------------------------------
1262 */
1263 if(!cmh_IsVldCmdSrc (srcId))
1264 {
1265 TRACE_EVENT_P1("sAT_PercentCNIV(): Invalid source: %d", srcId);
1266 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1267 return( AT_FAIL );
1268 }
1269
1270 /*
1271 *-------------------------------------------------------------------
1272 * process the mode parameter
1273 *-------------------------------------------------------------------
1274 */
1275 switch (mode)
1276 {
1277 case CNIV_MODE_OFF:
1278 case CNIV_MODE_ON:
1279 cmhPrm[srcId].mmCmdPrm.CNIVMode = mode;
1280 break;
1281
1282 default:
1283 TRACE_EVENT_P1("sAT_PercentCNIV(): Invalid mode: %d", mode);
1284 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1285 return( AT_FAIL );
1286 }
1287
1288 return( AT_CMPL );
1289 }
1290
1291 /*
1292 +--------------------------------------------------------------------+
1293 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
1294 | STATE : code ROUTINE : sAT_PercentCWUP |
1295 +--------------------------------------------------------------------+
1296
1297 PURPOSE : This is the functional counterpart to the +CWUP AT command
1298 which will force RR to trigger a power campaign.
1299
1300 */
1301
1302 GLOBAL T_ACI_RETURN sAT_PercentCWUP ( T_ACI_CMD_SRC srcId, T_ACI_CWUP_TYPE type )
1303 {
1304 TRACE_FUNCTION ("sAT_PercentCWUP()");
1305
1306 /*
1307 *-------------------------------------------------------------------
1308 * check command source
1309 *-------------------------------------------------------------------
1310 */
1311 if(!cmh_IsVldCmdSrc (srcId))
1312 {
1313 TRACE_EVENT_P1("sAT_PercentCWUP(): Invalid source: %d", srcId);
1314 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1315 return( AT_FAIL );
1316 }
1317
1318 /*
1319 *-------------------------------------------------------------------
1320 * check entity status
1321 *-------------------------------------------------------------------
1322 */
1323 if( mmEntStat.curCmd NEQ AT_CMD_NONE )
1324 {
1325 TRACE_EVENT("sAT_PercentCWUP(): MM is busy");
1326 return( AT_BUSY );
1327 }
1328
1329 wake_up_rr();
1330
1331 return( AT_CMPL );
1332 }
1333
1334
1335 /*==== EOF ========================================================*/