FreeCalypso > hg > fc-magnetite

comparison src/cs/layer1/include/l1_confg.h @ 0:945cf7f506b2

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
src/cs: chipsetsw import from tcs211-fcmodem binary blobs and LCD demo files have been excluded, all line endings are LF only
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 25 Sep 2016 22:50:11 +0000
parents
children
comparison
equal deleted inserted replaced
-1:000000000000 0:945cf7f506b2
1 /************* Revision Controle System Header *************
2 * GSM Layer 1 software
3 * L1_CONFG.H
4 *
5 * Filename l1_confg.h
6 * Copyright 2003 (C) Texas Instruments
7 *
8 ************* Revision Controle System Header *************/
9
10 #ifndef __L1_CONFG_H__
11 #define __L1_CONFG_H__
12
13 #ifndef _WINDOWS
14 #include "l1sw.cfg" // Configuration Software
15 #include "board.cfg"
16 #include "chipset.cfg"
17 #include "rf.cfg"
18 #include "swconfig.cfg"
19 #include "sys.cfg"
20 #endif
21
22 // Traces...
23 // TRACE_TYPE == 1,2,3 are used in standalone mode (L2-L3 Simul) with USART
24 // TRACE_TYPE == 4 is used on A-sample only (with UART): L1 + protocol stack
25 // TRACE_TYPE == 1 -> L1/L3 interface trace
26 // TRACE_TYPE == 2 -> Trace mode: ~33~~1~011...
27 // TRACE_TYPE == 3 -> same as above (2) plus FER or stats trace
28 // TRACE_TYPE == 4 -> L1/L3 interface trace on A-sample with protocol stack
29 // TRACE_TYPE == 5 -> trace for full simulation
30 // TRACE_TYPE == 6 -> CPU load trace for hisr
31 // TRACE_TYPE == 7 -> CPU LOAD trace for layer 1 hisr for all TDMA. Output on
32 // UART at 38400 bps =>
33 // format : <hisr cpu value in microseconds> <frame number>
34
35 // Code PB reported workaround
36 //------------------------------
37
38
39 // Code Version possible choices
40 //------------------------------
41 #define SIMULATION 1
42 #define NOT_SIMULATION 2
43
44 // RCL functions Version possible choices
45 //------------------------------
46 #define POLL_FORCED 0
47 #define RLC_SCENARIO 1
48 #define MODEM_FLOW 2
49
50 // possible choices for UART trace output
51 //------------------------------
52 #define MODEM_UART 0
53 #define IRDA_UART 1
54 #if (CHIPSET == 12)
55 #define MODEM2_UART 2
56 #endif
57
58 //============
59 // CODE CHOICE
60 //============
61 #if (OP_L1_STANDALONE==0)
62 #define CODE_VERSION NOT_SIMULATION
63 #else // OP_L1_STANDALONE
64 #ifdef WIN32
65 #define CODE_VERSION SIMULATION
66 #else // WIN32
67 #define CODE_VERSION NOT_SIMULATION
68 #endif // WIN32
69 #endif // OP_L1_STANDALONE
70
71 //---------------------------------------------------------------------------------
72 // Test with full simulation.
73 //---------------------------------------------------------------------------------
74 #if (CODE_VERSION == SIMULATION)
75
76 // Test Scenari...
77 #define SCENARIO_FILE 1 // Test Scenario comes from input files.
78 #define SCENARIO_MEM 0 // Test Scenario comes from RAM.
79
80 // Traces...
81 #undef TRACE_TYPE
82 #define TRACE_TYPE 5
83 #define LOGFILE_TRACE 1 // trace in an output logfile
84 #define FLOWCHART 0 // Message sequence/flow chart trace.
85 #define NUCLEUS_TRACE 0 // Nucleus error trace
86 #define EOTD_TRACE 1 // EOTD log trace
87 #define TRACE_FULL_NAME 0 // display full fct names after a PM/COM error
88
89 #define L2_L3_SIMUL 1 // Layer 2 & Layer 3 simulated, main within NU_MAIN.C, trace possible.
90
91 // Control algorithms...
92 #define AFC_ALGO 1 // AFC algorithm.
93 #define TOA_ALGO 1 // TOA algorithm.
94 #define AGC_ALGO 1 // AGC algorithm.
95 #define TA_ALGO 0 // TA (Timing Advance) algorithm.
96 #undef VCXO_ALGO
97 #define VCXO_ALGO 0 // VCXO algo
98 #undef DCO_ALGO
99 #define DCO_ALGO 0 // DCO algo (TIDE)
100 #undef ORDER2_TX_TEMP_CAL
101 #define ORDER2_TX_TEMP_CAL 0 // TX Temperature Compensation Algorithm selection
102
103
104 #define FACCH_TEST 0 // FACCH test enabled.
105
106 #define ADC_TIMER_ON 0 // Timer for ADC measurements
107 #define AFC_ON 1 // Enable of the Omega AFC module
108
109 #define AUDIO_TASK 1 // Enable the L1 audio features
110 #define AUDIO_SIMULATION 1 // Audio simulator for the audio tasks (works only with the new audio design i.e. AUDIO_TASK=1)
111 #define AUDIO_L1_STANDALONE 0 // Flag to enable the audio simulator used with the L1 stand-alone (works only with the new audio design i.e. AUDIO_TASK=1)
112
113 #define GTT_SIMULATION 1 // Gtt simulator for the gtt tasks (works only with if L1_GTT=1)
114 #define TTY_SYNC_MCU 1 // TTY WORKAROUND BUG03401
115 #define TTY_SYNC_MCU_2 1 //
116 #define L1_GTT_FIFO_TEST_ATOMIC 0 //
117 #define NEW_WKA_PATCH 0
118 #define OPTIMISED 1
119
120 #define L1_RECOVERY 0 // L1 recovery
121
122 #undef L1_GPRS
123 #define L1_GPRS 1 // GPRS L1: MS supporting both Circuit Switched and Packet (GPRS) capabilities
124
125 #undef AMR
126 #define AMR 1 // AMR version 1.0 supported
127
128 #undef L1_12NEIGH
129 #define L1_12NEIGH 1 // new L1-RR interface for 12 neighbour cells
130
131 #undef L1_GTT
132 #define L1_GTT 1 // Enable Global Text Telephony feature for simulation
133
134 #undef OP_L1_STANDALONE
135 #define OP_L1_STANDALONE 1 // Selection of code for L1 stand alone
136
137 #undef OP_RIV_AUDIO
138 #define OP_RIV_AUDIO 0 // Selection of code for Riviera audio
139
140 #undef OP_WCP
141 #define OP_WCP 0 // No WCP integration
142 //---------------------------------------------------------------------------------
143 // Test with H/W platform.
144 //---------------------------------------------------------------------------------
145 #elif (CODE_VERSION == NOT_SIMULATION)
146
147 #define WA_PCTM_AGC_PARAMS 0 // to work by default with 4 parameters to calibration (compatible with PCTM if 1)
148 // Work around about Calypso RevA: the bus is floating (Cf PB01435)
149 // (corrected with Calypso ReV B and Calypso C035)
150 #if (CHIPSET == 7)
151 #define W_A_CALYPSO_BUG_01435 1
152 #else
153 #define W_A_CALYPSO_BUG_01435 0
154 #endif
155
156
157 // for AMR thresolds definition CQ22226
158 #define AMR_THRESHOLDS_WORKAROUND 1
159
160 #if (L1_GTT==1)
161 #define TTY_SYNC_MCU 1
162 #define TTY_SYNC_MCU_2 1
163 #define L1_GTT_FIFO_TEST_ATOMIC 0
164 #define NEW_WKA_PATCH 0
165 #define OPTIMISED 1
166 #else
167 #define TTY_SYNC_MCU_2 0
168 #define L1_GTT_FIFO_TEST_ATOMIC 0
169 #define TTY_SYNC_MCU 0
170 #define NEW_WKA_PATCH 0
171 #define OPTIMISED 0
172
173 #endif
174
175 // Traces...
176 #define NUCLEUS_TRACE 0 // Nucleus error trace
177 #define FLOWCHART 0 // Message sequence/flow chart trace.
178 #define LOGFILE_TRACE 0 // trace in an output logfile
179 #define TRACE_FULL_NAME 0 // display full fct names after a PM/COM error
180
181 // Test Scenari...
182 #define SCENARIO_FILE 0 // Test Scenario comes from input files.
183 #define SCENARIO_MEM 1 // // Test Scenario comes from RAM.
184
185 #if (OP_L1_STANDALONE == 1)
186 #define L2_L3_SIMUL 1 // Layer 2 & Layer 3 simulated, main within NU_MAIN.C, trace possible.
187 #else
188 #define L2_L3_SIMUL 0
189 #endif
190
191 // Control algorithms...
192 #define AFC_ALGO 1 // AFC algorithm.
193 //TOA Algorithm needs to be on for TestMode, otherwise no dedic test will be succesful!!!
194 #define TOA_ALGO 1 // TOA algorithm.
195 #define AGC_ALGO 1 // AGC algorithm.
196 #define TA_ALGO 1 // TA (Timing Advance) algorithm.
197
198 #define FACCH_TEST 0 // FACCH test enabled.
199
200 #define ADC_TIMER_ON 0 // Timer for ADC measurements
201 #define AFC_ON 1 // Enable of the Omega AFC module
202
203 #define AUDIO_TASK 1 // Enable the L1 audio features
204 #define AUDIO_SIMULATION 0 // Audio simulator for the audio tasks (works only with the new audio design i.e. AUDIO_TASK=1)
205 #if (OP_L1_STANDALONE == 1)
206 #define AUDIO_L1_STANDALONE 1 // Flag to enable the audio simulator used with the L1 stand-alone (works only with the new audio design i.e. AUDIO_TASK=1)
207 #else
208 #define AUDIO_L1_STANDALONE 0
209 #endif
210
211 #define GTT_SIMULATION 0 // Gtt simulator for the gtt tasks (works only with if L1_GTT=1)
212
213 #define OP_BT 0 // Simulation of ISLAND (BLUETOOTH) sleep management
214
215 #define L1_RECOVERY 1 // L1 recovery
216
217
218 #if (L1_GPRS == 1)
219 #define RLC_VERSION RLC_SCENARIO
220 #if (RLC_VERSION == RLC_SCENARIO)
221 #define RLC_DL_BLOCK_STAT 0 // Works with RLC_VERSION = RLC_SCENARIO
222 // output stat on CRC error blocks
223 // The user must enter the cs type and
224 // the number of frames desired.
225 #else
226 #define RLC_DL_BLOCK_STAT 0 // Default value; Never change it
227 #endif
228
229 #if (OP_L1_STANDALONE == 1)
230 #define DSP_BACKGROUND_TASKS 1 // Enable the TEST of DSP background.tasks
231 // activated by a layer 3 message (BG_TASK_START (<task number>))
232 // deactivated by a layer 3 message (BG_TASK_STOP (<task number>))
233 // Warning : Works only with DSP>=31
234 #else
235 #define DSP_BACKGROUND_TASKS 0
236 #endif
237
238 #else
239 #define DSP_BACKGROUND_TASKS 0
240 #define RLC_DL_BLOCK_STAT 0 // Default value; Never change it
241 #endif
242 #endif
243
244 // Audio tasks selection
245 //-----------------------
246
247 #if (AUDIO_TASK == 1)
248 #define KEYBEEP 1 // Enable keybeep feature
249 #define TONE 1 // Enable tone feature
250 // Temporary modification for protocol stack compatibility - GSMLITE will be removed
251 #if (OP_L1_STANDALONE == 1)
252 #define GSMLITE 1
253 #endif
254 #if ((OP_L1_STANDALONE == 1) || (!GSMLITE))
255 #define MELODY_E1 1 // Enable melody format E1 feature
256 #define VOICE_MEMO 1 // Enable voice memorization feature
257
258 #define FIR 1 // Enable FIR feature
259 #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36)
260 #define AUDIO_MODE 1 // Enable Audio mode feature
261 #else
262 #define AUDIO_MODE 0 // Disable Audio mode feature
263 #endif
264 #else
265 #define MELODY_E1 0 // Disable melody format E1 feature
266 #define VOICE_MEMO 0 // Disable voice memorization feature
267 #if (MELODY_E2)
268 #define FIR 1 // Enable FIR feature
269 #else
270 #define FIR 0 // Disable FIR feature
271 #endif
272
273 #define AUDIO_MODE 0 // Disable Audio mode feature
274 #endif
275 // Define CPORT for ESample only
276 #if ((CHIPSET == 12) && ((DSP == 35) || (DSP == 36)))
277 #define L1_CPORT 1 // Enable cport feature
278 #else
279 #define L1_CPORT 0 // Disable cport feature
280 #endif
281
282 #else
283 #define KEYBEEP 0 // Enable keybeep feature
284 #define TONE 0 // Enable tone feature
285 #define MELODY_E1 0 // Enable melody format E1 feature
286 #define VOICE_MEMO 0 // Enable voice memorization feature
287
288 #define FIR 0 // Enable FIR feature
289 #define AUDIO_MODE 0 // Enable Audio mode feature
290 #define L1_CPORT 0 // Enable cport feature
291 #endif
292
293 #define L1_AUDIO_BACKGROUND_TASK (SPEECH_RECO | MELODY_E2) // audio background task is used by speech reco and melody_e2
294 #if (OP_RIV_AUDIO == 1)
295 #define L1_AUDIO_DRIVER L1_VOICE_MEMO_AMR // Riviera audio driver (only Voice Memo AMR is available)
296 #endif
297
298
299 // Vocoder selections
300 //-------------------
301
302 #define FR 1 // Full Rate
303 #define FR_HR 2 // Full Rate + Half Rate
304 #define FR_EFR 3 // Full Rate + Enhanced Full Rate
305 #define FR_HR_EFR 4 // Full Rate + Half Rate + Enhanced Full Rate
306
307 // Standard (frequency plan) selections
308 //-------------------------------------
309
310 #define GSM 1 // GSM900.
311 #define GSM_E 2 // GSM900 Extended.
312 #define PCS1900 3 // PCS1900.
313 #define DCS1800 4 // DCS1800.
314 #define DUAL 5 // Dual Band (GSM900 + DCS 1800 bands)
315 #define DUALEXT 6 // Dual Band (E-GSM900 + DCS 1800 bands)
316 #define GSM850 7 // GSM850 Band
317 #define DUAL_US 8 // PCS1900 + GSM850
318
319 /*------------------------------------*/
320 /* Power Management */
321 /*------------------------------------*/
322 #define PWR_MNGT 1 // POWER management active if l1_config.pwr_mngt=1
323
324
325 /*---------------------------------------------------------------------------*/
326 /* DSP configurations */
327 /* ------------------ */
328 /* DSP | FR| HR|EFR|14.4| SPEED |12LA68|12LA68 |4L32|AEC| MCU/DSP */
329 /* (version) | | | | | |POLE80|POLE112| |/NS| interface */
330 /* ----------+---+---+---+----+---------+------+-------+----+---+---------- */
331 /* 0 (821) | x | | | | 39Mhz | x | | | | 1 */
332 /* ----------+---+---+---+----+---------+------+-------+----+---+---------- */
333 /* 1 (830) | x | | | | 39Mhz | (1) | | x | | 1 */
334 /* ----------+---+---+---+----+---------+------+-------+----+---+---------- */
335 /* 2 (912) | x | x | | | 58.5Mhz | x | | | | 2 */
336 /* ----------+---+---+---+----+---------+------+-------+----+---+---------- */
337 /* 3 (10xx) | x | | x | x | 65Mhz | x | | | x | 3 */
338 /* ----------+---+---+---+----+---------+------+-------+----|---+---------- */
339 /* 4 (11xx) | x | x | x | x | 65Mhz | x | x (3)| | x | 3 */
340 /* ----------+---+---+---+----+---------+------+-------+----+---+---------- */
341 /* 5 (830) | x | | | | 39Mhz | x | | | | 1 */
342 /* ----------+---+---+---+----+---------+------+-------+----+---+---------- */
343 /* 6 (11xx) | x | x | x | x | 65Mhz | x | x (3)| |(2)| 3 */
344 /* ----------+---+---+---+----+---------+------+-------+----+---+---------- */
345 /* */
346 /*(1) this version can be loaded on a 12LA68/POLE80 but the RIF/DL problem is*/
347 /* not corrected. */
348 /* */
349 /*(2) AEC is disabled at DSP level but L1 must be compiled with MCU/DSP */
350 /* interface which support AEC, therefore AEC is defined as 1. */
351 /* */
352 /*(3) Pole112 include RIF DL correction. No patch is needed if this one only */
353 /* include RIF/DL problem. */
354 /* */
355 /*---------------------------------------------------------------------------*/
356 #if (DSP == 16 || DSP == 17)
357
358 /* #define CLKMOD1 0x414e // ...
359 #define CLKMOD2 0x414e // ...65 Mips
360 #define CLKSTART 0x29 // ...65 Mips */
361
362 #define CLKMOD1 0x4006 // ...
363 #define CLKMOD2 0x4116 // ...65 Mips pll free
364 #define CLKSTART 0x29 // ...65 Mips
365
366 /* #define CLKMOD1 0x2116 //This settings force the DSP to never enteridle
367 #define CLKMOD2 0x2116 //In this case the PLL will be always on. 39 Mips
368 #define CLKSTART 0x25 // ...39 Mips */
369
370 #define VOC FR_HR_EFR // FR + HR + EFR.
371 #define DATA14_4 1 // No 14.4 data allowed.
372 #define AEC 1 // AEC/NS supported.
373 #define MAP 3
374 #define DSP_START 0x2000
375 #define W_A_DSP1 0 // Work Around correcting pb in DSP: SACCH
376
377 #define W_A_DSP_SR_BGD 0 // Work around about the DSP speech reco background task.
378
379 /* DSP debug trace configuration */
380 /*-------------------------------*/
381 #if (MELODY_E2)
382 // In case of the melody E2 the DSP trace must be disable because the
383 // melody instrument waves are overlayed with DSP trace buffer
384
385 // DSP debug trace API buufer config
386 #define C_DEBUG_BUFFER_ADD 0x17ff // Address of DSP write pointer... data are just after.
387 #define C_DEBUG_BUFFER_SIZE 7 // Real size is incremented by 1 for DSP write pointer.
388 #else
389 // DSP debug trace API buufer config
390 #define C_DEBUG_BUFFER_ADD 0x17ff // Address of DSP write pointer... data are just after.
391 #define C_DEBUG_BUFFER_SIZE 2047 // Real size is incremented by 1 for DSP write pointer.
392 #endif
393
394 #elif (DSP == 30) // First GPRS.
395 #define CLKMOD1 0x4006 // ...
396 #define CLKMOD2 0x4116 // ...65 Mips pll free
397 #define CLKSTART 0x29 // ...65 Mips
398
399 #define VOC FR_HR_EFR // FR + HR + EFR.
400 #define DATA14_4 1 // No 14.4 data allowed.
401 #define AEC 1 // AEC/NS not supported.
402 #define MAP 3
403 #define DSP_START 0x1F81
404 #define W_A_DSP1 0 // Work Around correcting pb in DSP: SACCH
405 #define ULYSSE 0
406
407 #define W_A_DSP_SR_BGD 0 // Work around about the DSP speech reco background task.
408 #elif (DSP == 31) // ROM Code GPRS G0.
409 #define CLKMOD1 0x4006 // ...
410 #define CLKMOD2 0x4116 // ...65 Mips pll free
411 #define CLKSTART 0x29 // ...65 Mips
412
413 #define VOC FR_HR_EFR // FR + HR + EFR (normaly FR_EFR : PBs).
414 #define DATA14_4 1 // 14.4 data allowed.
415 #define AEC 1 // AEC/NS not supported.
416 #define MAP 3
417
418 #define DSP_START 0x8763
419
420 #define INSTALL_ADD 0x87c9 // Used to set gprs_install_address pointer
421 #define INSTALL_ADD_WITH_PATCH 0x1352 // Used to set gprs_install_address pointer
422
423 #define W_A_DSP1 0 // Work Around correcting pb in DSP: SACCH
424 #define ULYSSE 0
425
426 #define W_A_DSP_SR_BGD 0 // Work around about the DSP speech reco background task.
427 #elif (DSP == 32) // ROM Code GPRS G1.
428 #define CLKMOD1 0x4006 // ...
429 #define CLKMOD2 0x4116 // ...65 Mips pll free
430 #define CLKSTART 0x29 // ...65 Mips
431
432 #define VOC FR_HR_EFR // FR + HR + EFR (normaly FR_EFR : PBs).
433 #define DATA14_4 1 // 14.4 data allowed.
434 #define AEC 1 // AEC/NS not supported.
435 #define MAP 3
436
437 #define DSP_START 0x8763
438
439 #define INSTALL_ADD 0x87c9 // Used to set gprs_install_address pointer
440
441 #define W_A_DSP1 0 // Work Around correcting pb in DSP: SACCH
442 #define ULYSSE 0
443
444 #define W_A_DSP_SR_BGD 0 // Work around about the DSP speech reco background task.
445 #elif (DSP == 33) // ROM Code GPRS.
446 #define CLKMOD1 0x4006 // ...
447 #define CLKMOD2 0x4116 // ...65 Mips pll free
448 #define CLKSTART 0x29 // ...65 Mips
449 #define C_PLL_CONFIG 0x154 // For VTCXO = 13 MHz and max DSP speed = 84.5 Mips
450 #define VOC FR_HR_EFR // FR + HR + EFR (normaly FR_EFR : PBs).
451 #define AEC 1 // AEC/NS not supported.
452 #if (OP_RIV_AUDIO == 0)
453 #define L1_NEW_AEC 1
454 #else
455 // Available but not yet tuned with Riviera AUDIO
456 #define L1_NEW_AEC 0
457 #endif
458 #if ((L1_NEW_AEC) && (!AEC))
459 // First undef the flag to avoid warnings at compilation time
460 #undef AEC
461 #define AEC 1
462 #endif
463
464 #define MAP 3
465
466 #define DSP_START 0x7000
467
468 #define INSTALL_ADD 0x7002 // Used to set gprs_install_address pointer
469
470 #define W_A_DSP1 0 // Work Around correcting pb in DSP: SACCH
471 #define ULYSSE 0
472
473 #define W_A_DSP_SR_BGD 1 // Work around about the DSP speech reco background task.
474
475 #if ( (CHIPSET != 12) && (CODE_VERSION == NOT_SIMULATION))
476
477 #define W_A_DSP_IDLE3 1 // Work around to report DSP state to the ARM for Deep Sleep
478
479 // management.
480
481 // DSP_IDLE3 is not supported in simulation
482
483 #else
484 #define W_A_DSP_IDLE3 0
485 #endif
486
487 // DSP software work-around config
488 // bit0 - Work-around to support CRTG.
489 // bit1 - DMA reset on critical DMA still running cases, refer to REQ01260.
490 // bit2 - Solve Read/Write BULDATA pointers Omega & Nausica issue, refer to BUG00650.
491 // bit3 - Solve IBUFPTRx reset IOTA issue, refer to BUG01911.
492
493 #if (ANLG_FAM == 1) // OMEGA / NAUSICA
494 #define C_DSP_SW_WORK_AROUND 0x0006
495
496 #elif (ANLG_FAM == 2) // IOTA
497 #define C_DSP_SW_WORK_AROUND 0x000E
498
499 #elif (ANLG_FAM == 3) // SYREN
500 #define C_DSP_SW_WORK_AROUND 0x000E
501
502 #endif
503
504 /* DSP debug trace configuration */
505 /*-------------------------------*/
506 #if (MELODY_E2)
507 // In case of the melody E2 the DSP trace must be disable because the
508 // melody instrument waves are overlayed with DSP trace buffer
509
510 // DSP debug trace API buufer config
511 #define C_DEBUG_BUFFER_ADD 0x17ff // Address of DSP write pointer... data are just after.
512 #define C_DEBUG_BUFFER_SIZE 7 // Real size is incremented by 1 for DSP write pointer.
513
514 // DSP debug trace type config
515 // |<-------------- Features -------------->|<---------- Levels ----------->|
516 // [15-8:UNUSED|7:TIMER|6:BURST|5:BUFFER|4:BUFFER HEADER|3:UNUSED|2:KERNEL|1:BASIC|0:ISR]
517 #define C_DEBUG_TRACE_TYPE 0x0000 // Level = BASIC; Features = Timer + Buffer Header + Burst.
518
519 #if (C_DEBUG_TRACE_TYPE != 0) && ((TRACE_TYPE == 1) || (TRACE_TYPE == 4))
520 #define DSP_DEBUG_TRACE_ENABLE 1 // Enable DSP debug trace dumping capability
521 // Currently not supported !
522 #endif
523 #else
524 // DSP debug trace API buufer config
525 #define C_DEBUG_BUFFER_ADD 0x17ff // Address of DSP write pointer... data are just after.
526 #define C_DEBUG_BUFFER_SIZE 2047 // Real size is incremented by 1 for DSP write pointer.
527
528 // DSP debug trace type config
529 // |<-------------- Features -------------->|<---------- Levels ----------->|
530 // [15-8:UNUSED|7:TIMER|6:BURST|5:BUFFER|4:BUFFER HEADER|3:UNUSED|2:KERNEL|1:BASIC|0:ISR]
531 #define C_DEBUG_TRACE_TYPE 0x0012 // Level = BASIC; Features = Buffer Header.
532
533 #if (C_DEBUG_TRACE_TYPE != 0) && ((TRACE_TYPE == 1) || (TRACE_TYPE == 4))
534 #define DSP_DEBUG_TRACE_ENABLE 1 // Enable DSP debug trace dumping capability (supported since patch 2090)
535 #endif
536 #endif
537 /* d_error_status */
538 /*-------------------------------*/
539
540 #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4))
541 #define D_ERROR_STATUS_TRACE_ENABLE 1 // Enable d_error_status checking capability (supported since patch 2090)
542
543 // masks to apply on d_error_status bit field for DSP patch 0x2061 or 0x2062
544 #define DSP_DEBUG_GSM_MASK 0x0000
545 #define DSP_DEBUG_GPRS_MASK 0x0f3d
546 #endif
547
548 #if DCO_ALGO
549 // DCO type of scheduling
550 #define C_CN_DCO_PARAM 0xA248
551 #endif
552
553 #elif (DSP == 34) // ROM Code GPRS AMR.
554 #define CLKMOD1 0x4006 // ...
555 #define CLKMOD2 0x4116 // ...65 Mips pll free
556 #define CLKSTART 0x29 // ...65 Mips
557 #define C_PLL_CONFIG 0x154 // For VTCXO = 13 MHz and max DSP speed = 84.5 Mips
558 #define VOC FR_HR_EFR // FR + HR + EFR (normaly FR_EFR : PBs).
559 #define AEC 1 // AEC/NS not supported.
560 #if (OP_RIV_AUDIO == 0)
561 #define L1_NEW_AEC 1
562 #else
563 // Available but not yet tuned with Riviera AUDIO
564 #define L1_NEW_AEC 0
565 #endif
566 #if ((L1_NEW_AEC) && (!AEC))
567 // First undef the flag to avoid warnings at compilation time
568 #undef AEC
569 #define AEC 1
570 #endif
571 #define MAP 3
572
573 #define DSP_START 0x7000
574
575 #define INSTALL_ADD 0x7002 // Used to set gprs_install_address pointer
576
577 #define W_A_DSP1 0 // Work Around correcting pb in DSP: SACCH
578 #define ULYSSE 0
579
580 #define W_A_DSP_SR_BGD 1 // Work around about the DSP speech reco background task.
581
582 #if ( (CHIPSET != 12) && (CODE_VERSION == NOT_SIMULATION))
583
584 #define W_A_DSP_IDLE3 1 // Work around to report DSP state to the ARM for Deep Sleep
585
586 // management.
587
588 // DSP_IDLE3 is not supported in simulation
589
590 #else
591 #define W_A_DSP_IDLE3 0
592 #endif
593
594 // DSP software work-around config
595 // bit0 - Work-around to support CRTG.
596 // bit1 - DMA reset on critical DMA still running cases, refer to REQ01260.
597 // bit2 - Solve Read/Write BULDATA pointers Omega & Nausica issue, refer to BUG00650.
598 // bit3 - Solve IBUFPTRx reset IOTA issue, refer to BUG01911.
599 #if (ANLG_FAM == 1) // OMEGA / NAUSICA
600 #define C_DSP_SW_WORK_AROUND 0x0006
601
602 #elif (ANLG_FAM == 2) // IOTA
603 #define C_DSP_SW_WORK_AROUND 0x000E
604
605 #elif (ANLG_FAM == 3) // SYREN
606 #define C_DSP_SW_WORK_AROUND 0x000E
607
608 #endif
609
610 /* DSP debug trace configuration */
611 /*-------------------------------*/
612 #if (MELODY_E2)
613 // In case of the melody E2 the DSP trace must be disable because the
614 // melody instrument waves are overlayed with DSP trace buffer
615
616 // DSP debug trace API buufer config
617 #define C_DEBUG_BUFFER_ADD 0x17ff // Address of DSP write pointer... data are just after.
618 #define C_DEBUG_BUFFER_SIZE 7 // Real size is incremented by 1 for DSP write pointer.
619
620 // DSP debug trace type config
621 // |<-------------- Features -------------->|<---------- Levels ----------->|
622 // [15-8:UNUSED|7:TIMER|6:BURST|5:BUFFER|4:BUFFER HEADER|3:UNUSED|2:KERNEL|1:BASIC|0:ISR]
623 #define C_DEBUG_TRACE_TYPE 0x0000 // Level = BASIC; Features = Timer + Buffer Header + Burst.
624
625 #if (C_DEBUG_TRACE_TYPE != 0) && ((TRACE_TYPE == 1) || (TRACE_TYPE == 4))
626 #define DSP_DEBUG_TRACE_ENABLE 1 // Enable DSP debug trace dumping capability
627 // Currently not supported !
628 #endif
629 #else
630 // DSP debug trace API buufer config
631 #define C_DEBUG_BUFFER_ADD 0x17ff // Address of DSP write pointer... data are just after.
632 #define C_DEBUG_BUFFER_SIZE 2047 // Real size is incremented by 1 for DSP write pointer.
633
634 // DSP debug trace type config
635 // |<-------------- Features -------------->|<---------- Levels ----------->|
636 // [15-8:UNUSED|7:TIMER|6:BURST|5:BUFFER|4:BUFFER HEADER|3:UNUSED|2:KERNEL|1:BASIC|0:ISR]
637 #define C_DEBUG_TRACE_TYPE 0x0012 // Level = BASIC; Features = Buffer Header.
638
639 #if (C_DEBUG_TRACE_TYPE != 0) && ((TRACE_TYPE == 1) || (TRACE_TYPE == 4))
640 #define DSP_DEBUG_TRACE_ENABLE 1 // Enable DSP debug trace dumping capability (supported since patch 2090)
641 #endif
642
643 // AMR trace
644 #define C_AMR_TRACE_ID 55
645
646 #endif
647 /* d_error_status */
648 /*-------------------------------*/
649
650 #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4))
651 #define D_ERROR_STATUS_TRACE_ENABLE 1 // Enable d_error_status checking capability (supported since patch 2090)
652
653 // masks to apply on d_error_status bit field
654 #define DSP_DEBUG_GSM_MASK 0x0000
655 #define DSP_DEBUG_GPRS_MASK 0x0f3d
656 #endif
657
658 #elif (DSP == 35) // ROM Code GPRS AMR.
659 #define CLKMOD1 0x4006 // ...
660 #define CLKMOD2 0x4116 // ...65 Mips pll free
661 #define CLKSTART 0x29 // ...65 Mips
662 #define C_PLL_CONFIG 0x154 // For VTCXO = 13 MHz and max DSP speed = 84.5 Mips
663 #define VOC FR_HR_EFR // FR + HR + EFR (normaly FR_EFR : PBs).
664 #define AEC 1 // AEC/NS not supported.
665 #if (OP_RIV_AUDIO == 0)
666 #define L1_NEW_AEC 1
667 #else
668 // Available but not yet tuned with Riviera AUDIO
669 #define L1_NEW_AEC 0
670 #endif
671 #if ((L1_NEW_AEC) && (!AEC))
672 // First undef the flag to avoid warnings at compilation time
673 #undef AEC
674 #define AEC 1
675 #endif
676 #define MAP 3
677
678 #define FF_L1_TCH_VOCODER_CONTROL 1
679 #define L1M_WAIT_DSP_RESTART_AFTER_VOCODER_ENABLE 1
680
681 #define DSP_START 0x7000
682
683 #define INSTALL_ADD 0x7002 // Used to set gprs_install_address pointer
684
685 #define W_A_DSP1 0 // Work Around correcting pb in DSP: SACCH
686 #define ULYSSE 0
687
688 #define W_A_DSP_SR_BGD 1 // Work around about the DSP speech reco background task.
689
690 #if ( (CHIPSET != 12) && (CODE_VERSION == NOT_SIMULATION))
691
692 #define W_A_DSP_IDLE3 1 // Work around to report DSP state to the ARM for Deep Sleep
693
694 // management.
695
696 // DSP_IDLE3 is not supported in simulation
697
698 #else
699 #define W_A_DSP_IDLE3 0
700 #endif
701
702 // DSP software work-around config
703 // bit0 - Work-around to support CRTG.
704 // bit1 - DMA reset on critical DMA still running cases, refer to REQ01260.
705 // bit2 - Solve Read/Write BULDATA pointers Omega & Nausica issue, refer to BUG00650.
706 // bit3 - Solve IBUFPTRx reset IOTA issue, refer to BUG01911.
707 #if (ANLG_FAM == 1) // OMEGA / NAUSICA
708 #define C_DSP_SW_WORK_AROUND 0x0006
709
710 #elif (ANLG_FAM == 2) // IOTA
711 #define C_DSP_SW_WORK_AROUND 0x000E
712
713 #elif (ANLG_FAM == 3) // SYREN
714 #define C_DSP_SW_WORK_AROUND 0x000E
715
716 #endif
717
718 /* DSP debug trace configuration */
719 /*-------------------------------*/
720 #if (MELODY_E2)
721 // In case of the melody E2 the DSP trace must be disable because the
722 // melody instrument waves are overlayed with DSP trace buffer
723
724 // DSP debug trace API buufer config
725 #define C_DEBUG_BUFFER_ADD 0x17ff // Address of DSP write pointer... data are just after.
726 #define C_DEBUG_BUFFER_SIZE 7 // Real size is incremented by 1 for DSP write pointer.
727
728 // DSP debug trace type config
729 // |<-------------- Features -------------->|<---------- Levels ----------->|
730 // [15-8:UNUSED|7:TIMER|6:BURST|5:BUFFER|4:BUFFER HEADER|3:UNUSED|2:KERNEL|1:BASIC|0:ISR]
731 #define C_DEBUG_TRACE_TYPE 0x0000 // Level = BASIC; Features = Timer + Buffer Header + Burst.
732
733 #if (C_DEBUG_TRACE_TYPE != 0) && ((TRACE_TYPE == 1) || (TRACE_TYPE == 4))
734 #define DSP_DEBUG_TRACE_ENABLE 1 // Enable DSP debug trace dumping capability
735 // Currently not supported !
736 #endif
737 #else
738 // DSP debug trace API buufer config
739 #define C_DEBUG_BUFFER_ADD 0x17ff // Address of DSP write pointer... data are just after.
740 #define C_DEBUG_BUFFER_SIZE 2047 // Real size is incremented by 1 for DSP write pointer.
741
742 // DSP debug trace type config
743 // |<-------------- Features -------------->|<---------- Levels ----------->|
744 // [15-8:UNUSED|7:TIMER|6:BURST|5:BUFFER|4:BUFFER HEADER|3:UNUSED|2:KERNEL|1:BASIC|0:ISR]
745 #define C_DEBUG_TRACE_TYPE 0x0012 // Level = BASIC; Features = Timer + Buffer Header + Burst.
746
747 #if (C_DEBUG_TRACE_TYPE != 0) && ((TRACE_TYPE == 1) || (TRACE_TYPE == 4))
748 #define DSP_DEBUG_TRACE_ENABLE 1 // Enable DSP debug trace dumping capability (supported since patch 2090)
749 #endif
750
751 // AMR trace
752 #define C_AMR_TRACE_ID 55
753
754 #endif
755 /* d_error_status */
756 /*-------------------------------*/
757
758 #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4))
759 #define D_ERROR_STATUS_TRACE_ENABLE 1 // Enable d_error_status checking capability (supported since patch 2090)
760
761 // masks to apply on d_error_status bit field for DSP patch 0x2061 or 0x2062
762 #define DSP_DEBUG_GSM_MASK 0x08BD
763 #define DSP_DEBUG_GPRS_MASK 0x0f3d
764 #endif
765 #elif (DSP == 36) // ROM Code GPRS AMR.
766 #define CLKMOD1 0x4006 // ...
767 #define CLKMOD2 0x4116 // ...65 Mips pll free
768 #define CLKSTART 0x29 // ...65 Mips
769 #define C_PLL_CONFIG 0x154 // For VTCXO = 13 MHz and max DSP speed = 84.5 Mips
770 #define VOC FR_HR_EFR // FR + HR + EFR (normaly FR_EFR : PBs).
771 #define AEC 1 // AEC/NS not supported.
772 #if (OP_RIV_AUDIO == 0)
773 #define L1_NEW_AEC 1
774 #else
775 // Available but not yet tuned with Riviera AUDIO
776 #define L1_NEW_AEC 0
777 #endif
778 #if ((L1_NEW_AEC) && (!AEC))
779 // First undef the flag to avoid warnings at compilation time
780 #undef AEC
781 #define AEC 1
782 #endif
783 #define MAP 3
784 #undef L1_AMR_NSYNC
785 #define L1_AMR_NSYNC 1
786 #define FF_L1_TCH_VOCODER_CONTROL 1
787 #define L1M_WAIT_DSP_RESTART_AFTER_VOCODER_ENABLE 1
788
789 #define DSP_START 0x7000
790
791 #define INSTALL_ADD 0x7002 // Used to set gprs_install_address pointer
792
793 #define W_A_DSP1 0 // Work Around correcting pb in DSP: SACCH
794 #define ULYSSE 0
795
796 #define W_A_DSP_SR_BGD 1 // Work around about the DSP speech reco background task.
797
798 #if ( (CHIPSET != 12) && (CODE_VERSION == NOT_SIMULATION))
799
800 #define W_A_DSP_IDLE3 1 // Work around to report DSP state to the ARM for Deep Sleep
801
802 // management.
803
804 // DSP_IDLE3 is not supported in simulation
805
806 #else
807 #define W_A_DSP_IDLE3 0
808 #endif
809
810 // DSP software work-around config
811 // bit0 - Work-around to support CRTG.
812 // bit1 - DMA reset on critical DMA still running cases, refer to REQ01260.
813 // bit2 - Solve Read/Write BULDATA pointers Omega & Nausica issue, refer to BUG00650.
814 // bit3 - Solve IBUFPTRx reset IOTA issue, refer to BUG01911.
815 #if (ANLG_FAM == 1) // OMEGA / NAUSICA
816 #define C_DSP_SW_WORK_AROUND 0x0006
817
818 #elif (ANLG_FAM == 2) // IOTA
819 #define C_DSP_SW_WORK_AROUND 0x000E
820
821 #elif (ANLG_FAM == 3) // SYREN
822 #define C_DSP_SW_WORK_AROUND 0x000E
823 #endif
824
825 // This workaround should be enabled only for H2-sample on full build config
826 #if (OP_L1_STANDALONE==1)
827 #define RAZ_VULSWITCH_REGAUDIO 0
828 #endif
829
830 /* DSP debug trace configuration */
831 /*-------------------------------*/
832 #if (MELODY_E2)
833 // In case of the melody E2 the DSP trace must be disable because the
834 // melody instrument waves are overlayed with DSP trace buffer
835
836 // DSP debug trace API buufer config
837 #define C_DEBUG_BUFFER_ADD 0x17ff // Address of DSP write pointer... data are just after.
838 #define C_DEBUG_BUFFER_SIZE 7 // Real size is incremented by 1 for DSP write pointer.
839
840 // DSP debug trace type config
841 // |<-------------- Features -------------->|<---------- Levels ----------->|
842 // [15-8:UNUSED|7:TIMER|6:BURST|5:BUFFER|4:BUFFER HEADER|3:UNUSED|2:KERNEL|1:BASIC|0:ISR]
843 #define C_DEBUG_TRACE_TYPE 0x0000 // Level = BASIC; Features = Timer + Buffer Header + Burst.
844
845 #if (C_DEBUG_TRACE_TYPE != 0) && ((TRACE_TYPE == 1) || (TRACE_TYPE == 4))
846 #define DSP_DEBUG_TRACE_ENABLE 1 // Enable DSP debug trace dumping capability
847 // Currently not supported !
848 #endif
849 #else
850 // DSP debug trace API buufer config
851 #define C_DEBUG_BUFFER_ADD 0x17ff // Address of DSP write pointer... data are just after.
852 #define C_DEBUG_BUFFER_SIZE 2047 // Real size is incremented by 1 for DSP write pointer.
853
854 // DSP debug trace type config
855 // |<-------------- Features -------------->|<---------- Levels ----------->|
856 // [15-8:UNUSED|7:TIMER|6:BURST|5:BUFFER|4:BUFFER HEADER|3:UNUSED|2:KERNEL|1:BASIC|0:ISR]
857 #define C_DEBUG_TRACE_TYPE 0x0012 // Level = BASIC; Features = Buffer Header.
858
859 #if (C_DEBUG_TRACE_TYPE != 0) && ((TRACE_TYPE == 1) || (TRACE_TYPE == 4))
860 #define DSP_DEBUG_TRACE_ENABLE 1 // Enable DSP debug trace dumping capability (supported since patch 2090)
861 #endif
862
863 // AMR trace
864 #define C_AMR_TRACE_ID 55
865
866 #endif
867 /* d_error_status */
868 /*-------------------------------*/
869
870 #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4))
871 #define D_ERROR_STATUS_TRACE_ENABLE 1 // Enable d_error_status checking capability (supported since patch 2090)
872
873 // masks to apply on d_error_status bit field for DSP patch 0x2061 or 0x2062
874 #define DSP_DEBUG_GSM_MASK 0x08BD
875 #define DSP_DEBUG_GPRS_MASK 0x0f3d
876 #endif
877 #endif // DSP
878
879 /*------------------------------------*/
880 /* Default value */
881 /*------------------------------------*/
882 #ifndef W_A_DSP1
883 #define W_A_DSP1 0
884 #endif
885
886 #ifndef DATA14_4
887 #define DATA14_4 0
888 #endif
889
890 #ifndef W_A_ITFORCE
891 #define W_A_ITFORCE 0
892 #endif
893
894 #ifndef W_A_DSP_IDLE3
895 #define W_A_DSP_IDLE3 0
896 #endif
897
898 #ifndef L1_NEW_AEC
899 #define L1_NEW_AEC 0
900 #endif
901
902 #ifndef DSP_DEBUG_TRACE_ENABLE
903 #define DSP_DEBUG_TRACE_ENABLE 0
904 #endif
905
906 #ifndef DEBUG_DEDIC_TCH_BLOCK_STAT
907 #define DEBUG_DEDIC_TCH_BLOCK_STAT 0
908 #endif
909
910 #ifndef D_ERROR_STATUS_TRACE_ENABLE
911 #define D_ERROR_STATUS_TRACE_ENABLE 0
912 #endif
913
914 #ifndef L1_GTT
915 #define L1_GTT 0
916 #define TTY_SYNC_MCU 0
917 #define TTY_SYNC_MCU_2 0
918 #define L1_GTT_FIFO_TEST_ATOMIC 0
919 #define NEW_WKA_PATCH 0
920 #define OPTIMISED 0
921 #endif
922
923 #ifndef L1_AMR_NSYNC
924 #define L1_AMR_NSYNC 0
925 #endif
926
927 #ifndef FF_L1_TCH_VOCODER_CONTROL
928 #define FF_L1_TCH_VOCODER_CONTROL 0
929 #define L1M_WAIT_DSP_RESTART_AFTER_VOCODER_ENABLE 0
930 #endif
931
932 /*------------------------------------*/
933 /* Download */
934 /*------------------------------------*/
935
936
937 /* Possible values for the download status */
938
939 #define LEAD_READY 1
940 #define BLOCK_READY 2
941 #define PROGRAM_DONE 3
942 #define PAGE_SELECTION 4
943
944
945 /************************************/
946 /* Options of compilation... */
947 /************************************/
948
949 // Possible choice of hardware plateform.
950 #define GEMINI 1 // GEMINI chip (rom dsp code)
951 #define POLESTAR 2 // POLESTAR chip (no rom)
952
953 // Possible choice for DSP software setup.
954 #define NO_DWNLD 0
955 #define PATCH_DWNLD 1
956 #define DSP_DWNLD 2
957 #define PATCH_DSP_DWNLD 3
958
959 // MAC-S status reporting to Layer 1
960 #define MACS_STATUS 0 // MAC-S STATUS activated if set to 1
961
962
963 // Possible choice for dll_dcch_downlink interface (with FN or without FN)
964 #define SEND_FN_TO_L2_IN_DCCH 1 /* 0=without, 1=with FN parameter */
965
966 //---------------------------------------------------------------------------------
967
968 // Neighbor Cell RXLEV indication
969 #if ((OP_L1_STANDALONE==1) && (CODE_VERSION == NOT_SIMULATION))
970 #define L1_MPHC_RXLEV_IND_REPORT_SORT 1
971 #else
972 #define L1_MPHC_RXLEV_IND_REPORT_SORT 0
973 #endif
974
975 #endif /* __L1_CONFG_H__ */