FreeCalypso > hg > fc-magnetite
comparison src/cs/layer1/tpu_drivers/source0/tpudrv12.h @ 608:c09a1ca60d57
proper GTM900 target with TPU config per Songbosi
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 17 Jun 2019 21:18:10 +0000 |
| parents | 92dbfa906f66 |
| children | d968a3216ba0 |
comparison
equal
deleted
inserted
replaced
| 607:030ce1ddd4f7 | 608:c09a1ca60d57 |
|---|---|
| 368 #define RU_1900 ( PA_OFF | FEM_PINS ^ FEM_RX_1900 ) | 368 #define RU_1900 ( PA_OFF | FEM_PINS ^ FEM_RX_1900 ) |
| 369 #define RD_1900 ( PA_OFF | FEM_PINS ^ 0 ) | 369 #define RD_1900 ( PA_OFF | FEM_PINS ^ 0 ) |
| 370 #define TU_1900 ( PA_HI_BAND | FEM_PINS ^ FEM_TX_HIGH ) | 370 #define TU_1900 ( PA_HI_BAND | FEM_PINS ^ FEM_TX_HIGH ) |
| 371 #define TD_1900 ( PA_OFF | FEM_PINS ^ 0 ) | 371 #define TD_1900 ( PA_OFF | FEM_PINS ^ 0 ) |
| 372 | 372 |
| 373 #elif defined(CONFIG_TARGET_GTM900) | |
| 374 | |
| 375 /* | |
| 376 * Huawei GTM900-B is very closely based on Leonardo (2-band version), | |
| 377 * but the two FEM Tx control signals are reversed. | |
| 378 */ | |
| 379 | |
| 380 #define FEM_TX_LOW BIT_1 // act1 | |
| 381 #define FEM_TX_HIGH BIT_2 // act2 | |
| 382 | |
| 383 #define PA_HI_BAND BIT_3 // act3 | |
| 384 #define PA_LO_BAND 0 | |
| 385 #define PA_OFF 0 | |
| 386 | |
| 387 #define FEM_PINS (FEM_TX_LOW | FEM_TX_HIGH) | |
| 388 | |
| 389 #define FEM_OFF ( FEM_PINS ^ 0 ) | |
| 390 | |
| 391 #define FEM_SLEEP ( 0 ) | |
| 392 | |
| 393 // This configuration is always inverted. | |
| 394 | |
| 395 // RX_UP/DOWN and TX_UP/DOWN | |
| 396 #define RU_900 ( PA_OFF | FEM_PINS ^ 0 ) | |
| 397 #define RD_900 ( PA_OFF | FEM_PINS ^ 0 ) | |
| 398 #define TU_900 ( PA_LO_BAND | FEM_PINS ^ FEM_TX_LOW ) | |
| 399 #define TD_900 ( PA_OFF | FEM_PINS ^ 0 ) | |
| 400 | |
| 401 #define RU_850 ( PA_OFF | FEM_PINS ^ 0 ) | |
| 402 #define RD_850 ( PA_OFF | FEM_PINS ^ 0 ) | |
| 403 #define TU_850 ( PA_LO_BAND | FEM_PINS ^ FEM_TX_LOW ) | |
| 404 #define TD_850 ( PA_OFF | FEM_PINS ^ 0 ) | |
| 405 | |
| 406 #define RU_1800 ( PA_OFF | FEM_PINS ^ 0 ) | |
| 407 #define RD_1800 ( PA_OFF | FEM_PINS ^ 0 ) | |
| 408 #define TU_1800 ( PA_HI_BAND | FEM_PINS ^ FEM_TX_HIGH ) | |
| 409 #define TD_1800 ( PA_OFF | FEM_PINS ^ 0 ) | |
| 410 | |
| 411 #define RU_1900 ( PA_OFF | FEM_PINS ^ 0 ) | |
| 412 #define RD_1900 ( PA_OFF | FEM_PINS ^ 0 ) | |
| 413 #define TU_1900 ( PA_HI_BAND | FEM_PINS ^ FEM_TX_HIGH ) | |
| 414 #define TD_1900 ( PA_OFF | FEM_PINS ^ 0 ) | |
| 415 | |
| 373 #elif defined(CONFIG_TARGET_PIRELLI) | 416 #elif defined(CONFIG_TARGET_PIRELLI) |
| 374 | 417 |
| 375 #define ANTSW_RX_PCS BIT_4 | 418 #define ANTSW_RX_PCS BIT_4 |
| 376 #define ANTSW_TX_HIGH BIT_10 | 419 #define ANTSW_TX_HIGH BIT_10 |
| 377 #define ANTSW_TX_LOW BIT_11 | 420 #define ANTSW_TX_LOW BIT_11 |