comparison cdg3/cdginc-conservative/p_dio.val @ 16:c15047b3d00d

cdg3: import from freecalypso-citrine/cdg
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 27 Sep 2016 16:27:34 +0000
parents
children
comparison
equal deleted inserted replaced
15:c8bdae60fcb1 16:c15047b3d00d
1 /*
2 +--------------------------------------------------------------------------+
3 | PROJECT : PROTOCOL STACK |
4 | FILE : p_dio.val |
5 | SOURCE : "sap\dio.pdf" |
6 | LastModified : "2004-03-19" |
7 | IdAndVersion : "..." |
8 | SrcFileTime : "Thu Nov 29 09:39:48 2007" |
9 | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014 |
10 | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! |
11 +--------------------------------------------------------------------------+
12 */
13
14 /* PRAGMAS
15 * PREFIX : NONE
16 * COMPATIBILITY_DEFINES : NO (require PREFIX)
17 * ALWAYS_ENUM_IN_VAL_FILE: NO
18 * ENABLE_GROUP: NO
19 * CAPITALIZE_TYPENAME: NO
20 */
21
22
23 #ifndef P_DIO_VAL
24 #define P_DIO_VAL
25
26
27 #define CDG_ENTER__P_DIO_VAL
28
29 #define CDG_ENTER__FILENAME _P_DIO_VAL
30 #define CDG_ENTER__P_DIO_VAL__FILE_TYPE CDGINC
31 #define CDG_ENTER__P_DIO_VAL__LAST_MODIFIED _2004_03_19
32 #define CDG_ENTER__P_DIO_VAL__ID_AND_VERSION _
33
34 #define CDG_ENTER__P_DIO_VAL__SRC_FILE_TIME _Thu_Nov_29_09_39_48_2007
35
36 #include "CDG_ENTER.h"
37
38 #undef CDG_ENTER__P_DIO_VAL
39
40 #undef CDG_ENTER__FILENAME
41
42
43 /*
44 * Value constants for VAL_baud_rate
45 */
46 #define DIO4_BAUD_RESERVED (0x0) /* reserved value */
47 #define DIO4_BAUD_AUTO (0x1) /* Automatic detected */
48 #define DIO4_BAUD_75 (0x2) /* Transmission rate of 75 bits/sec */
49 #define DIO4_BAUD_110 (0x4) /* Transmission rate of 110 bits/sec */
50 #define DIO4_BAUD_150 (0x8) /* Transmission rate of 150 bits/sec */
51 #define DIO4_BAUD_300 (0x10) /* Transmission rate of 300 bits/sec */
52 #define DIO4_BAUD_600 (0x20) /* Transmission rate of 600 bits/sec */
53 #define DIO4_BAUD_1200 (0x40) /* Transmission rate of 1200 bits/sec */
54 #define DIO4_BAUD_2400 (0x80) /* Transmission rate of 2400 bits/sec */
55 #define DIO4_BAUD_4800 (0x100) /* Transmission rate of 4800 bits/sec */
56 #define DIO4_BAUD_7200 (0x200) /* Transmission rate of 7200 bits/sec */
57 #define DIO4_BAUD_9600 (0x400) /* Transmission rate of 9600 bits/sec */
58 #define DIO4_BAUD_14400 (0x800) /* Transmission rate of 14400 bits/sec */
59 #define DIO4_BAUD_19200 (0x1000) /* Transmission rate of 19200 bits/se */
60 #define DIO4_BAUD_28800 (0x2000) /* Transmission rate of 28800 bits/se */
61 #define DIO4_BAUD_33900 (0x4000) /* Transmission rate of 33900 bits/se */
62 #define DIO4_BAUD_38400 (0x8000) /* Transmission rate of 38400 bits/se */
63 #define DIO4_BAUD_57600 (0x10000) /* Transmission rate of 57600 bits/se */
64 #define DIO4_BAUD_115200 (0x20000) /* Transmission rate of 115200 bits/se */
65 #define DIO4_BAUD_203125 (0x40000) /* Transmission rate of 203125 bits/se */
66 #define DIO4_BAUD_230400 (0x80000) /* Transmission rate of 230400 bits/se */
67 #define DIO4_BAUD_406250 (0x100000) /* Transmission rate of 406250 bits/se */
68 #define DIO4_BAUD_460800 (0x200000) /* Transmission rate of460800 bits/se */
69 #define DIO4_BAUD_812500 (0x400000) /* Transmission rate of 812500 bits/se */
70 #define DIO4_BAUD_921600 (0x800000) /* Transmission rate of 921600 bits/se */
71
72 /*
73 * Value constants for VAL_dev_type
74 */
75 #define DIO_DATA_MUX (0x200000) /* device can start a multiplexer */
76 #define DIO_DATA_PKT (0x400000) /* device can contain packet data */
77 #define DIO_DATA_SER (0x800000) /* device can contain serial data */
78 #define DIO_DATA_SER_MUX (0xa0000) /* serial device which can start a multiplexer */
79 #define DIO_TYPE_ID_MASK (0xff00) /* mask for dio identifier to separate different capability structs with the same combination */
80 #define DIO_TYPE_DAT_MASK (0xff0000) /* mask for dio identifier to separate kind of data support */
81 #define DIO_TYPE_SER (0x800100) /* Type for serial devices like UART */
82 #define DIO_TYPE_SER_MUX (0xa00100) /* Type for serial devices like UART. It is possible to start a 27.010 multiplexer on devices of this type */
83 #define DIO_TYPE_PKT (0x400100) /* Type for packet devices */
84
85 /*
86 * Value constants for VAL_char_frame
87 */
88 #define DIO_CF_8N2 (0x1) /* 8 data bits; no parity bit; 2 stop bits */
89 #define DIO_CF_8O1 (0x2) /* 8 data bits; odd parity bit; 1 stop bits */
90 #define DIO_CF_8E1 (0x4) /* 8 data bits; even parity bit; 1 stop bits */
91 #define DIO_CF_8M1 (0x8) /* 8 data bits; mark parity bit; 1 stop bits */
92 #define DIO_CF_8S1 (0x10) /* 8 data bits; space parity bit; 1 stop bits */
93 #define DIO_CF_8N1 (0x20) /* 8 data bits; no parity bit; 1 stop bits */
94 #define DIO_CF_7N2 (0x40) /* 7 data bits; no parity bit; 2 stop bits */
95 #define DIO_CF_7O1 (0x80) /* 7 data bits; odd parity bit; 1 stop bits */
96 #define DIO_CF_7E1 (0x100) /* 7 data bits; even parity bit; 1 stop bits */
97 #define DIO_CF_7M1 (0x200) /* 7 data bits; mark parity bit; 1 stop bits */
98 #define DIO_CF_7S1 (0x400) /* 7 data bits; space parity bit;1 stop bits */
99 #define DIO_CF_7N1 (0x800) /* 7 data bits; no parity bit; 1 stop bits */
100
101 /*
102 * Value constants for VAL_flow_control
103 */
104 #define DIO_FLOW_NONE (0x1) /* Data transmit: None Data receive: None */
105 #define DIO_FLOW_NO_XOFF (0x2) /* Data transmit: None Data receive: XON/XOFF */
106 #define DIO_FLOW_NO_CTS (0x4) /* Data transmit: None Data receive: CTS */
107 #define DIO_FLOW_XON_NO (0x8) /* Data transmit: local XON/XOFF Data receive: None */
108 #define DIO_FLOW_XON_XOFF (0x10) /* Data transmit: local XON/XOFF Data receive: XON/XOFF */
109 #define DIO_FLOW_XON_CTS (0x20) /* Data transmit: local XON/XOFF Data receive:CTS */
110 #define DIO_FLOW_RTS_NO (0x40) /* Data transmit: RTS Data receive: None */
111 #define DIO_FLOW_RTS_XOFF (0x80) /* Data transmit: RTS Data receive: XON/XOFF */
112 #define DIO_FLOW_RTS_CTS (0x100) /* Data transmit: RTS Data receive: CTS */
113 #define DIO_FLOW_XTR_NO (0x200) /* Data transmit: transparent XON/XOFF Data receive: None */
114 #define DIO_FLOW_XTR_XOFF (0x400) /* Data transmit: transparent XON/XOFF Data receive: CTS */
115 #define DIO_FLOW_XTR_CTS (0x800) /* Data transmit: transparent XON/XOFF Data receive: CTS */
116
117 /*
118 * Value constants for VAL_line_states
119 */
120 #define LINE_STD_DCD_ON (0x1) /* b00000001 set line DCD on */
121 #define LINE_STD_DCD_OFF (0x2) /* b00000010 set line DCD off */
122 #define LINE_STD_RING_ON (0x4) /* b00000100 set line RING on */
123 #define LINE_STD_RING_OFF (0x8) /* b00001000 set line RING off */
124 #define LINE_STD_ESCD_IND (0x10) /* b00010000 escape sequence indication */
125 #define LINE_STD_DTR_LDR (0x20) /* b00100000 DTR line drop indication */
126
127 /*
128 * Value constants for VAL_ser_flags
129 */
130 #define DIO_FLAG_SER_ESC (0x80000000)/* device supports escape sequence detection */
131
132 /*
133 * Value constants for VAL_device
134 */
135 #define DIO_DRV_MASK (0xff000000)/* mask for driver number to identify the driver */
136 #define DIO_TYPE_MASK (0xffff00) /* mask for device type */
137 #define DIO_DEVICE_MASK (0xff) /* mask for actual device number chosen by the driver */
138 #define DIO_DRV_UART (0x0) /* UART driver */
139 #define DIO_DRV_USB (0x1000000)/* USB driver */
140 #define DIO_DRV_MUX (0x2000000)/* 27.010 multiplexer driver */
141 #define DIO_DRV_PKT (0x3000000)/* packet driver */
142 #define DIO_DRV_MCBSP (0x4000000)/* McBSP driver */
143 #define DIO_DRV_APP (0x5000000)/* Application adapter */
144 #define DIO_DRV_BAT (0x6000000)/* Binary Interface Adapter */
145
146 /*
147 * Value constants for VAL_dev_flag
148 */
149 #define DIO_FLAG_SLEEP (0x80000000)/* device provides the feature power saving state */
150
151 /*
152 * Value constants for VAL_mux_mode
153 */
154 #define DIO_MUX_BASIC (0x1) /* mux supports Basic option */
155 #define DIO_MUX_UIH (0x2) /* mux supports Advanced option with UIH frames */
156 #define DIO_MUX_UI (0x4) /* mux supports Advanced option with UI frames */
157 #define DIO_MUX_I (0x8) /* mux supports Advanced option with I frames (error recovery) */
158
159 /*
160 * Value constants for VAL_contr_type
161 */
162 #define DIO4_CTRL_LINES (0x1) /* control struct contains serial line states */
163 #define DIO4_CTRL_MUX (0x2) /* control struct contains mux control parameter */
164
165 /*
166 * Value constants for VAL_dev_mode
167 */
168 #define DIO_MODE_SER (0x1) /* device acts as serial device */
169 #define DIO_MODE_MUX (0x2) /* device acts as 27.010 mux device */
170
171 /*
172 * Value constants for VAL_esc_char
173 */
174 #define ESC_CHAR_DEFAULT (0x2b) /* default escape character ('+') */
175
176 /*
177 * Value constants for VAL_guard_per
178 */
179 #define DIO_ESC_OFF (0x0) /* turn escape sequence detection off */
180 #define DIO_GUARD_PER_DEFAULT (0x3e8) /* default value 1000ms */
181
182 /*
183 * Value constants for VAL_k
184 */
185 #define K_DEFAULT (0x2) /* k default value */
186
187 /*
188 * Value constants for VAL_n1
189 */
190 #define MUX_N1_BASIC_DEFAULT (0x1f) /* default value for the basic option */
191 #define MUX_N1_ADVANCED_DEFAULT (0x40) /* default value for the advanced option */
192
193 /*
194 * Value constants for VAL_n2
195 */
196 #define MUX_N2_DEFAULT (0x3) /* default number of retransmission */
197
198 /*
199 * Value constants for VAL_sleep_mode
200 */
201 #define DIO_SLEEP_ENABLE (0x1) /* enter sleep mode if possible */
202 #define DIO_SLEEP_DISABLE (0x2) /* do not enter sleep mode */
203
204 /*
205 * Value constants for VAL_cb_line_state
206 */
207 #define DIO_SA (0x80000000)/* read/write: device ready */
208 #define DIO_SB (0x40000000)/* read/write: data valid */
209 #define DIO_X (0x20000000)/* read/write: flow control */
210 #define DIO_RING (0x10000000)/* write: RING indicator */
211 #define DIO_ESC (0x8000000)/* read: escape seqence detected */
212 #define DIO_MUX_STOPPED (0x4000000)/* multiplexer stopped */
213 #define DIO_BRK (0x2000000)/* read/write: break received/to be send */
214 #define DIO_BRKLEN_MASK (0xff) /* read/write: length of break signal in character; only valid if DIO_BREAK bit is set to 1 */
215
216 /*
217 * Value constants for VAL_t1
218 */
219 #define MUX_T1_DEFAULT (0xa) /* default acknowledgement timer (100ms) */
220
221 /*
222 * Value constants for VAL_t2
223 */
224 #define MUX_T2_DEFAULT (0x1e) /* default response timer */
225
226 /*
227 * Value constants for VAL_t3
228 */
229 #define MUX_T3_DEFAULT (0xa) /* default wake up response timer (100ms) */
230
231 /*
232 * Value constants for VAL_xoff
233 */
234 #define XOFF_DEFAULT (0x13) /* xoff default value */
235
236 /*
237 * Value constants for VAL_xon
238 */
239 #define XON_DEFAULT (0x11) /* xon default value */
240
241 /*
242 * Value constants for VAL_start_mux
243 */
244 #define DIO_MUX_DYNAMIC (0x0) /* Do not start the 27.010 multiplexer immediately. The multi-plexer may be started dynamically on runtime */
245 #define DIO_MUX_START (0x1) /* Starts the 27.010 multiplexer permanently. The multiplexer can not be turned off during runtime */
246
247 #include "CDG_LEAVE.h"
248
249
250 #endif