FreeCalypso > hg > fc-magnetite
comparison cdg-hybrid/cdginc/m_sat.val @ 212:e7a67accfad9
cdg-hybrid cdginc headers created
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Fri, 14 Oct 2016 21:52:58 +0000 |
| parents | |
| children |
comparison
equal
deleted
inserted
replaced
| 211:02269c474131 | 212:e7a67accfad9 |
|---|---|
| 1 /* | |
| 2 +--------------------------------------------------------------------------+ | |
| 3 | PROJECT : PROTOCOL STACK | | |
| 4 | FILE : m_sat.val | | |
| 5 | SOURCE : "msg\sat.mdf" | | |
| 6 | LastModified : "2003-02-25" | | |
| 7 | IdAndVersion : "6147.609.99.011" | | |
| 8 | SrcFileTime : "Wed Nov 28 10:21:04 2007" | | |
| 9 | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | |
| 10 | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | | |
| 11 +--------------------------------------------------------------------------+ | |
| 12 */ | |
| 13 | |
| 14 /* PRAGMAS | |
| 15 * PREFIX : NONE | |
| 16 * COMPATIBILITY_DEFINES : NO (require PREFIX) | |
| 17 * ALWAYS_ENUM_IN_VAL_FILE: NO | |
| 18 * ENABLE_GROUP: NO | |
| 19 * CAPITALIZE_TYPENAME: NO | |
| 20 */ | |
| 21 | |
| 22 | |
| 23 #ifndef M_SAT_VAL | |
| 24 #define M_SAT_VAL | |
| 25 | |
| 26 | |
| 27 #define CDG_ENTER__M_SAT_VAL | |
| 28 | |
| 29 #define CDG_ENTER__FILENAME _M_SAT_VAL | |
| 30 #define CDG_ENTER__M_SAT_VAL__FILE_TYPE CDGINC | |
| 31 #define CDG_ENTER__M_SAT_VAL__LAST_MODIFIED _2003_02_25 | |
| 32 #define CDG_ENTER__M_SAT_VAL__ID_AND_VERSION _6147_609_99_011 | |
| 33 | |
| 34 #define CDG_ENTER__M_SAT_VAL__SRC_FILE_TIME _Wed_Nov_28_10_21_04_2007 | |
| 35 | |
| 36 #include "CDG_ENTER.h" | |
| 37 | |
| 38 #undef CDG_ENTER__M_SAT_VAL | |
| 39 | |
| 40 #undef CDG_ENTER__FILENAME | |
| 41 | |
| 42 | |
| 43 /* | |
| 44 * Value constants for VAL_cmd_typ | |
| 45 */ | |
| 46 #define SAT_CMD_REFRESH (0x1) /* Refresh command */ | |
| 47 #define SAT_CMD_MORE_TIME (0x2) /* More time command */ | |
| 48 #define SAT_CMD_POLL_INTERVAL (0x3) /* Poll interval command */ | |
| 49 #define SAT_CMD_POLL_OFF (0x4) /* Polling off command */ | |
| 50 #define SAT_CMD_EVENT_LIST (0x5) /* Setup event list command */ | |
| 51 #define SAT_CMD_SETUP_CALL (0x10) /* Set up call command */ | |
| 52 #define SAT_CMD_SEND_SS (0x11) /* Send SS command */ | |
| 53 #define SAT_CMD_SEND_USSD (0x12) /* Send USSD Command */ | |
| 54 #define SAT_CMD_SEND_SMS (0x13) /* Send Short Message command */ | |
| 55 #define SAT_CMD_SEND_DTMF (0x14) /* Send DTMF command */ | |
| 56 #define SAT_CMD_LAUNCH_BROWSER (0x15) /* Launch WWW Browser class c */ | |
| 57 #define SAT_CMD_PLAY_TONE (0x20) /* Play tone command */ | |
| 58 #define SAT_CMD_DISPLAY_TEXT (0x21) /* Display text command */ | |
| 59 #define SAT_CMD_GET_INKEY (0x22) /* Get inkey command */ | |
| 60 #define SAT_CMD_GET_INPUT (0x23) /* Get input command */ | |
| 61 #define SAT_CMD_SEL_ITEM (0x24) /* Select item command */ | |
| 62 #define SAT_CMD_SETUP_MENU (0x25) /* Set up menu command */ | |
| 63 #define SAT_CMD_PROV_LOC_INFO (0x26) /* Provide loacal information command */ | |
| 64 #define SAT_CMD_TIMER_MNG (0x27) /* Timer Managemant command */ | |
| 65 #define SAT_CMD_IDLE_TEXT (0x28) /* Set up idle mode text command */ | |
| 66 #define SAT_CMD_RUN_AT (0x34) /* Run AT command */ | |
| 67 #define SAT_CMD_OPEN_CHANNEL (0x40) /* Open data channel for CS or GPRS class e */ | |
| 68 #define SAT_CMD_CLOSE_CHANNEL (0x41) /* Close data channel class e */ | |
| 69 #define SAT_CMD_RECEIVE_DATA (0x42) /* Receive data from ME from the channel class e */ | |
| 70 #define SAT_CMD_SEND_DATA (0x43) /* Send the data to the channel via ME class e */ | |
| 71 #define SAT_CMD_GET_CHANNEL_STATUS (0x44) /* Get the status of the data channel opened class e */ | |
| 72 #define SAT_CMD_END_SESSION (0x81) /* End of proactive session command */ | |
| 73 | |
| 74 /* | |
| 75 * Value constants for VAL_cmd_qlf | |
| 76 */ | |
| 77 #define QLF_RFSH_INIT (0x0) /* Refresh: SIM initialization */ | |
| 78 #define QLF_RFSH_INIT_FULL_CHNG_NTFY (0x1) /* Refresh: SIM initialization and full file change notification */ | |
| 79 #define QLF_RFSH_FILE_CHNG_NTFY (0x2) /* Refresh: File change notification */ | |
| 80 #define QLF_RFSH_INIT_FILE_CHNG_NTFY (0x3) /* Refresh: SIM initialization and file change notification */ | |
| 81 #define QLF_RFSH_RESET (0x4) /* Refresh: SIM reset */ | |
| 82 #define QLF_CALL_IDLE (0x0) /* Set up call: idle */ | |
| 83 #define QLF_CALL_IDLE_RDL (0x1) /* Set up call: idle with redial */ | |
| 84 #define QLF_CALL_HOLD (0x2) /* Set up call: hold */ | |
| 85 #define QLF_CALL_HOLD_RDL (0x3) /* Set up call: hold with redial */ | |
| 86 #define QLF_CALL_DISC (0x4) /* Set up call: disconnect */ | |
| 87 #define QLF_CALL_DISC_RDL (0x5) /* Set up call: disconnect with redial */ | |
| 88 #define QLF_SMS_NO_PACK (0x0) /* Send SMS: packing not required */ | |
| 89 #define QLF_SMS_PACK (0x1) /* Send SMS: packing required */ | |
| 90 #define QLF_DISP_PRIO_NORM (0x0) /* Display text: normal priority */ | |
| 91 #define QLF_DISP_PRIO_HIGH (0x1) /* Display text: high priority */ | |
| 92 #define QLF_DISP_CLR_DELAY (0x0) /* Display text: clear message after delay */ | |
| 93 #define QLF_DISP_CLR_USER (0x80) /* Display text: wait for user to clear message */ | |
| 94 #define QLF_INKY_DIGITS (0x0) /* Get inkey: digits (0-9, *,# and +) only */ | |
| 95 #define QLF_INKY_ALPHA (0x1) /* Get inkey: alphabet set */ | |
| 96 #define QLF_INKY_SMS_DEF (0x0) /* Get inkey; SMS default alphabet */ | |
| 97 #define QLF_INKY_UCS2 (0x2) /* Get inkey: UCS2 alphabet */ | |
| 98 #define QLF_INKY_NO_HELP (0x0) /* Get inkey: no help information available */ | |
| 99 #define QLF_INKY_HELP (0x80) /* Get inkey: help information available */ | |
| 100 #define QLF_INPT_DIGITS (0x0) /* Get input: digits (0-9, *,# and +) only */ | |
| 101 #define QLF_INPT_ALPHA (0x1) /* Get input: alphabet set */ | |
| 102 #define QLF_INPT_SMS_DEF (0x0) /* Get input; SMS default alphabet */ | |
| 103 #define QLF_INPT_UCS2 (0x2) /* Get input: UCS2 alphabet */ | |
| 104 #define QLF_INPT_ECHO (0x0) /* Get input: ME may echo input */ | |
| 105 #define QLF_INPT_NO_ECHO (0x4) /* Get input: input shall not revealed in any way */ | |
| 106 #define QLF_INPT_NO_PACK (0x0) /* Get input: unpacket input format */ | |
| 107 #define QLF_INPT_PACK (0x8) /* Get input: SMS packed input format */ | |
| 108 #define QLF_INPT_NO_HELP (0x0) /* Get input: no help information available */ | |
| 109 #define QLF_INPT_HELP (0x80) /* Get input: help information available */ | |
| 110 #define QLF_SITM_NOPRES (0x0) /* Select item: presentation type is not specified */ | |
| 111 #define QLF_SITM_PRES (0x1) /* Select item: presentation type is specified in bit 2 */ | |
| 112 #define QLF_SITM_CHVAL (0x0) /* Select item: presentation as a choice of data values if bit 1 = '1' */ | |
| 113 #define QLF_SITM_CHNAV (0x2) /* Select item: presentation as a choice of navigation options if bit 1 is '1' */ | |
| 114 #define QLF_SITM_SEL_NOPREF (0x0) /* Select item: no selection preference */ | |
| 115 #define QLF_SITM_SEL_PREF_SOFTKEY (0x4) /* Select item: selection using soft key preferred */ | |
| 116 #define QLF_SITM_NO_HELP (0x0) /* Select item: no help information available */ | |
| 117 #define QLF_SITM_HELP (0x80) /* Select item: help information available */ | |
| 118 #define QLF_SMNU_SEL_NOPREF (0x0) /* Set up menu: no selection preference */ | |
| 119 #define QLF_SMNU_SEL_PREF_SOFTKEY (0x1) /* Set up menu: selection using soft key preferred */ | |
| 120 #define QLF_SMNU_NO_HELP (0x0) /* Set up menu: no help information available */ | |
| 121 #define QLF_SMNU_HELP (0x80) /* Set up menu: help information available */ | |
| 122 #define QLF_PLOI_LOC_INFO (0x0) /* Provide local information: Local information */ | |
| 123 #define QLF_PLOI_IMEI (0x1) /* Provide local information: IMEI of ME */ | |
| 124 #define QLF_PLOI_NTW_MSR (0x2) /* Provide local information: Network measurement results */ | |
| 125 #define QLF_PLOI_DTT (0x3) /* Provide local information: Date, Time and Timezone */ | |
| 126 #define QLF_PLOI_LANG_SET (0x4) /* Provide local information: Language Setting */ | |
| 127 #define QLF_PLOI_TIM_ADV (0x5) /* Provide local information: Timing Advance */ | |
| 128 #define QLF_LABR_IF_NOT_LCHD (0x0) /* Launch Browser: launch browser, if not already launched */ | |
| 129 #define QLF_LABR_NOT_USED1 (0x2) /* Launch Browser: not used */ | |
| 130 #define QLF_LABR_USE_EXISTING (0x2) /* Launch Browser: use the existing browser */ | |
| 131 #define QLF_LABR_CLOSE_AND_NEW (0x3) /* Launch Browser: close the existing browser session and launch new browser session */ | |
| 132 #define QLF_LABR_NOT_USED2 (0x4) /* Launch Browser: not used */ | |
| 133 #define QLF_OPCH_ON_DEMD_LINK_EST (0x0) /* Open Channel: on demand link establishment (class e) */ | |
| 134 #define QLF_OPCH_IMMDT_LINK_EST (0x1) /* Open Channel: immediate link establishment (class e) */ | |
| 135 #define QLF_OPCH_NO_AUTO_RECONNECT (0x0) /* Open Channel: no automatic reconnection (class e) */ | |
| 136 #define QLF_OPCH_AUTO_RECONNECT (0x2) /* Open Channel: automatic reconnection (class e) */ | |
| 137 #define QLF_SNDDAT_TX (0x0) /* Send Data: store data in Tx buffer (class e) */ | |
| 138 #define QLF_SNDDAT_IM (0x1) /* Send Data: Send data immediately (class e) */ | |
| 139 | |
| 140 /* | |
| 141 * Value constants for VAL_src_dev | |
| 142 */ | |
| 143 #define DEV_SRC_KBD (0x1) /* Device keypad */ | |
| 144 #define DEV_SRC_DSP (0x2) /* Device display */ | |
| 145 #define DEV_SRC_EAR (0x3) /* Device earpiece */ | |
| 146 #define DEV_SRC_CDR0 (0x10) /* Device Additional Card Reader 0 */ | |
| 147 #define DEV_SRC_CDR1 (0x11) /* Device Additional Card Reader 1 */ | |
| 148 #define DEV_SRC_CDR2 (0x12) /* Device Additional Card Reader 2 */ | |
| 149 #define DEV_SRC_CDR3 (0x13) /* Device Additional Card Reader 3 */ | |
| 150 #define DEV_SRC_CDR4 (0x14) /* Device Additional Card Reader 4 */ | |
| 151 #define DEV_SRC_CDR5 (0x15) /* Device Additional Card Reader 5 */ | |
| 152 #define DEV_SRC_CDR6 (0x16) /* Device Additional Card Reader 6 */ | |
| 153 #define DEV_SRC_CDR7 (0x17) /* Device Additional Card Reader 7 */ | |
| 154 #define DEV_SRC_CH1 (0x21) /* Device Channel 1 (class e) */ | |
| 155 #define DEV_SRC_CH2 (0x22) /* Device Channel 2 (class e) */ | |
| 156 #define DEV_SRC_CH3 (0x23) /* Device Channel 3 (class e) */ | |
| 157 #define DEV_SRC_CH4 (0x24) /* Device Channel 4 (class e) */ | |
| 158 #define DEV_SRC_CH5 (0x25) /* Device Channel 5 (class e) */ | |
| 159 #define DEV_SRC_CH6 (0x26) /* Device Channel 6 (class e) */ | |
| 160 #define DEV_SRC_CH7 (0x27) /* Device Channel 7 (class e) */ | |
| 161 #define DEV_SRC_SIM (0x81) /* Device SIM */ | |
| 162 #define DEV_SRC_ME (0x82) /* Device mobile equipment */ | |
| 163 #define DEV_SRC_NTW (0x83) /* Device network */ | |
| 164 | |
| 165 /* | |
| 166 * Value constants for VAL_dest_dev | |
| 167 */ | |
| 168 #define DEV_DST_KBD (0x1) /* Device keypad */ | |
| 169 #define DEV_DST_DSP (0x2) /* Device display */ | |
| 170 #define DEV_DST_EAR (0x3) /* Device earpiece */ | |
| 171 #define DEV_DST_CDR0 (0x10) /* Device Additional Card Reader 0 */ | |
| 172 #define DEV_DST_CDR1 (0x11) /* Device Additional Card Reader 1 */ | |
| 173 #define DEV_DST_CDR2 (0x12) /* Device Additional Card Reader 2 */ | |
| 174 #define DEV_DST_CDR3 (0x13) /* Device Additional Card Reader 3 */ | |
| 175 #define DEV_DST_CDR4 (0x14) /* Device Additional Card Reader 4 */ | |
| 176 #define DEV_DST_CDR5 (0x15) /* Device Additional Card Reader 5 */ | |
| 177 #define DEV_DST_CDR6 (0x16) /* Device Additional Card Reader 6 */ | |
| 178 #define DEV_DST_CDR7 (0x17) /* Device Additional Card Reader 7 */ | |
| 179 #define DEV_DST_CH1 (0x21) /* Device Channel 1 (class e) */ | |
| 180 #define DEV_DST_CH2 (0x22) /* Device Channel 2 (class e) */ | |
| 181 #define DEV_DST_CH3 (0x23) /* Device Channel 3 (class e) */ | |
| 182 #define DEV_DST_CH4 (0x24) /* Device Channel 4 (class e) */ | |
| 183 #define DEV_DST_CH5 (0x25) /* Device Channel 5 (class e) */ | |
| 184 #define DEV_DST_CH6 (0x26) /* Device Channel 6 (class e) */ | |
| 185 #define DEV_DST_CH7 (0x27) /* Device Channel 7 (class e) */ | |
| 186 #define DEV_DST_SIM (0x81) /* Device SIM */ | |
| 187 #define DEV_DST_ME (0x82) /* Device mobile equipment */ | |
| 188 #define DEV_DST_NTW (0x83) /* Device network */ | |
| 189 | |
| 190 /* | |
| 191 * Value constants for VAL_time_unit | |
| 192 */ | |
| 193 #define TU_MIN (0x0) /* Minutes */ | |
| 194 #define TU_SEC (0x1) /* Seconds */ | |
| 195 #define TU_100_MSEC (0x2) /* Tenth of seconds */ | |
| 196 | |
| 197 /* | |
| 198 * Value constants for VAL_noa | |
| 199 */ | |
| 200 #define VAL_NOA___DEF (0x0) /* Reserved */ | |
| 201 #define NOA_UNKNOWN (0x0) /* unknown */ | |
| 202 #define NOA_INTER_NUM (0x1) /* international number */ | |
| 203 #define NOA_NATIO_NUM (0x2) /* national significant number */ | |
| 204 #define NOA_NETW_NUM (0x3) /* network specific number */ | |
| 205 #define NOA_SUBSC_NUM (0x4) /* subscriber number */ | |
| 206 #define NOA_ABBRV_NUM (0x6) /* abbreviated number */ | |
| 207 | |
| 208 /* | |
| 209 * Value constants for VAL_npi | |
| 210 */ | |
| 211 #define VAL_NPI___DEF (0x0) /* reserved */ | |
| 212 #define NPI_UNKNOWN (0x0) /* unknown */ | |
| 213 #define NPI_ISDN (0x1) /* ISDN/Telephony Numbering Plan (Rec CCITT E.164) */ | |
| 214 #define NPI_X121 (0x3) /* data numbering plan (CCITT Rec X.121) */ | |
| 215 #define NPI_F69 (0x4) /* telex numbering plan (CCITT Rec F.69) */ | |
| 216 #define NPI_LAND_MOBILE (0x6) /* land mobile numbering plan (CCITT Rec E.212) */ | |
| 217 #define NPI_NATIONAL (0x8) /* land mobile numbering plan (CCITT Rec E.212) */ | |
| 218 #define NPI_PRIVATE (0x9) /* Private numbering plan */ | |
| 219 | |
| 220 /* | |
| 221 * Value constants for VAL_gen | |
| 222 */ | |
| 223 #define RSLT_PERF_SUCCESS (0x0) /* Command performed successfully */ | |
| 224 #define RSLT_PERF_PART_CMPR (0x1) /* Command performed with partial comprehension */ | |
| 225 #define RSLT_PERF_MISS_INFO (0x2) /* Command performed with missing information */ | |
| 226 #define RSLT_RFSH_ADD_EF (0x3) /* Refresh performed with additional EF read */ | |
| 227 #define RSLT_PERF_MDFY_SIM (0x5) /* Command performed but modified by SIM */ | |
| 228 #define RSLT_PERF_LIM_SRV (0x6) /* Command performed successfully, limited service */ | |
| 229 #define RSLT_PERF_MDFIED (0x7) /* Command performed with modification (class e) */ | |
| 230 #define RSLT_SESS_USR_TERM (0x10) /* Proactive SIM session terminated by user */ | |
| 231 #define RSLT_SESS_USR_BACK (0x11) /* Backward move in proactive SIM session */ | |
| 232 #define RSLT_NO_RESP (0x12) /* No response from user */ | |
| 233 #define RSLT_HELP_USR_REQ (0x13) /* Help information required by user */ | |
| 234 #define RSLT_USER_TERM_SS (0x14) /* SS or USSD transaction terminated by user */ | |
| 235 #define RSLT_ME_UNAB_PROC (0x20) /* ME is unable to process command */ | |
| 236 #define RSLT_NTW_UNAB_PROC (0x21) /* Network is unable to process command */ | |
| 237 #define RSLT_USR_REJ (0x22) /* User did not accept set up request */ | |
| 238 #define RSLT_USR_CLR_DWN (0x23) /* User cleared down call before connection or network release */ | |
| 239 #define RSLT_CC_SIM_TMP (0x25) /* Interaction with call control by SIM temporary problem */ | |
| 240 #define RSLT_LABRWS_GENERIC (0x26) /* Launch browser generic error code (class e) */ | |
| 241 #define RSLT_ME_CAP (0x30) /* Command beyond ME capabilities */ | |
| 242 #define RSLT_UNKN_TYPE (0x31) /* Command type not understood */ | |
| 243 #define RSLT_UNKN_DATA (0x32) /* Command data not understood */ | |
| 244 #define RSLT_UNKN_NR (0x33) /* Command number not understood */ | |
| 245 #define RSLT_SS_ERR (0x34) /* SS return error */ | |
| 246 #define RSLT_SMS_ERR (0x35) /* SMS RP-ERROR */ | |
| 247 #define RSLT_ERR_REQ_VAL (0x36) /* Error, required values are missing */ | |
| 248 #define RSLT_USSD_ERR (0x37) /* USSD return error */ | |
| 249 #define RSLT_CC_SIM_PRM (0x39) /* interaction with call control by SIM or SMS control by SIM permanent problem */ | |
| 250 #define RSLT_BEARIND_PERR (0x3a) /* Bearer Independent Protocol error (class e) */ | |
| 251 | |
| 252 /* | |
| 253 * Value constants for VAL_add | |
| 254 */ | |
| 255 #define ADD_NO_CAUSE (0x0) /* No specific cause can be given */ | |
| 256 #define ADD_ME_SCR_BUSY (0x1) /* ME: Screen is busy */ | |
| 257 #define ADD_ME_CALL_BUSY (0x2) /* ME: currently busy on call */ | |
| 258 #define ADD_ME_SS_BUSY (0x3) /* ME: currently busy on SS transaction */ | |
| 259 #define ADD_ME_NO_SERV (0x4) /* ME: no service */ | |
| 260 #define ADD_ME_ACC_BAR (0x5) /* ME: Access control class bar */ | |
| 261 #define ADD_ME_RR_DENIED (0x6) /* ME: Radio resource not granted */ | |
| 262 #define ADD_ME_NO_SPCH_CALL (0x7) /* ME: Not in speech call */ | |
| 263 #define ADD_ME_USSD_BUSY (0x8) /* ME: currently busy on USSD transaction */ | |
| 264 #define ADD_CC_NOT_ALLWD (0x1) /* Call Control: Action not allowed */ | |
| 265 #define ADD_CC_REQ_CHNG (0x2) /* Call Control: Type of request has changed */ | |
| 266 #define ADD_LBP_BEARR_NAVAIL (0x1) /* Launch browser: Bearer unavailable (class c) */ | |
| 267 #define ADD_LBP_BRWSR_NAVAIL (0x2) /* Launch browser: Browser unavailable (class c) */ | |
| 268 #define ADD_LBP_ME_UNABL_RDPD (0x3) /* Launch browser: ME unable to read provisioning data (class c) */ | |
| 269 #define ADD_BIP_NO_CHAN_AVAIL (0x1) /* No channel available (class e) */ | |
| 270 #define ADD_BIP_CHAN_CLOSD (0x2) /* Channel closed (class e) */ | |
| 271 #define ADD_BIP_CHANID_NT_VLD (0x3) /* Channel identifier not valid (class e) */ | |
| 272 #define ADD_BIP_BUF_SIZ_NAVAIL (0x4) /* Requested buffer size not available (class e) */ | |
| 273 #define ADD_BIP_SECUR_ERR (0x5) /* Security error (unsuccessful authentication) (class e) */ | |
| 274 #define ADD_BIP_SIME_ITL_NAVAIL (0x6) /* Requested SIM/ME interface transport level not available (class e) */ | |
| 275 | |
| 276 /* | |
| 277 * Value constants for VAL_tos | |
| 278 */ | |
| 279 #define VAL_TOS___DEF (0x0) /* Reserved */ | |
| 280 #define TOS_X213 (0x0) /* NSAP (X.213/ISO 8348 AD2) */ | |
| 281 #define TOS_USER (0x2) /* User Specified */ | |
| 282 | |
| 283 /* | |
| 284 * Value constants for VAL_oei | |
| 285 */ | |
| 286 #define OEI_EVEN (0x0) /* even number of address signals */ | |
| 287 #define OEI_ODD (0x1) /* odd number of address signals */ | |
| 288 | |
| 289 /* | |
| 290 * Value constants for VAL_event | |
| 291 */ | |
| 292 #define VAL_EVENT___DEF (0x0) /* Reserved */ | |
| 293 #define EVENT_MT_CALL (0x0) /* Incoming Call */ | |
| 294 #define EVENT_CALL_CONN (0x1) /* Call is connected */ | |
| 295 #define EVENT_CALL_DISC (0x2) /* Call is disconnected */ | |
| 296 #define EVENT_LOC_STATUS (0x3) /* Service status change */ | |
| 297 #define EVENT_USER_ACTIVE (0x4) /* User activity */ | |
| 298 #define EVENT_IDLE_SCREEN (0x5) /* Idle screen is available */ | |
| 299 #define EVENT_BROWS_TERMIN (0x8) /* Browser Termination (if class c supported) */ | |
| 300 #define EVENT_DATA_AVAIL (0x9) /* Data available (if class e supported) */ | |
| 301 #define EVENT_CHAN_STAT (0xa) /* Channel Status (if class e supported) */ | |
| 302 | |
| 303 /* | |
| 304 * Value constants for VAL_bc_rpi | |
| 305 */ | |
| 306 #define VAL_BC_RPI___DEF (0x0) /* Reserved */ | |
| 307 #define BC_RPI_ALT (0x1) /* Alternate mode */ | |
| 308 #define BC_RPI_SEQ (0x3) /* Sequential mode */ | |
| 309 | |
| 310 /* | |
| 311 * Value constants for VAL_loc_state | |
| 312 */ | |
| 313 #define VAL_LOC_STATE___DEF (0x0) /* Reserved */ | |
| 314 #define LOC_ST_NORMAL (0x1) /* Normal service */ | |
| 315 #define LOC_ST_LIMITED (0x2) /* Limited service */ | |
| 316 #define LOC_ST_NOSERV (0x3) /* No service */ | |
| 317 | |
| 318 /* | |
| 319 * Value constants for VAL_gprs_pdp_type | |
| 320 */ | |
| 321 #define PDP_TYPE_IP (0x2) /* Internet Protocol, IETF STD 5 */ | |
| 322 | |
| 323 /* | |
| 324 * Value constants for VAL_oth_addr_type | |
| 325 */ | |
| 326 #define VAL_OTH_ADDR_TYPE___DEF (0x0) /* reserved */ | |
| 327 #define IPv4 (0x21) /* Internet Protocal vers.4 */ | |
| 328 #define IPv6 (0x57) /* Internet Protocal vers.6 */ | |
| 329 | |
| 330 /* | |
| 331 * Value constants for VAL_trans_prot_type | |
| 332 */ | |
| 333 #define VAL_TRANS_PROT_TYPE___DEF (0x0) /* reserved */ | |
| 334 #define UDP (0x1) /* User Datagramm Protocol */ | |
| 335 #define TCP (0x2) /* Transmission Control Protocol */ | |
| 336 | |
| 337 /* | |
| 338 * Value constants for VAL_browser | |
| 339 */ | |
| 340 #define VAL_BROWSER___DEF (0x0) /* reserved */ | |
| 341 #define DEFAULT_BROWSER (0x0) /* Default browser usage */ | |
| 342 | |
| 343 /* | |
| 344 * Value constants for VAL_bearer | |
| 345 */ | |
| 346 #define VAL_BEARER___DEF (0x0) /* reserved */ | |
| 347 #define B_SMS (0x0) /* short message service */ | |
| 348 #define B_CSD (0x1) /* circle switched data */ | |
| 349 #define B_USSD (0x2) /* unstructured supplementary service data */ | |
| 350 #define B_GPRS (0x3) /* generel packet radio systeme */ | |
| 351 | |
| 352 /* | |
| 353 * Value constants for VAL_brows_term_s | |
| 354 */ | |
| 355 #define USER_TERMINATION (0x0) /* terminated by user action */ | |
| 356 #define ERROR_TERMINATION (0x1) /* terminated by error */ | |
| 357 | |
| 358 /* | |
| 359 * Value constants for VAL_chan_id | |
| 360 */ | |
| 361 #define NO_CHAN_AVAIL (0x0) | |
| 362 #define CHANNEL_ID_1 (0x1) | |
| 363 #define CHANNEL_ID_2 (0x2) | |
| 364 #define CHANNEL_ID_3 (0x3) | |
| 365 #define CHANNEL_ID_4 (0x4) | |
| 366 #define CHANNEL_ID_5 (0x5) | |
| 367 #define CHANNEL_ID_6 (0x6) | |
| 368 #define CHANNEL_ID_7 (0x7) | |
| 369 | |
| 370 /* | |
| 371 * Value constants for VAL_chan_stat_inf1 | |
| 372 */ | |
| 373 #define VAL_CHAN_STAT_INF1___DEF (0x0) /* reserved */ | |
| 374 | |
| 375 /* | |
| 376 * Value constants for VAL_chan_stat_link | |
| 377 */ | |
| 378 #define LINK_NO_ESTABL (0x0) /* link not established or PDP context not activated */ | |
| 379 #define LINK_ESTABL (0x1) /* link established or PDP context activated */ | |
| 380 | |
| 381 /* | |
| 382 * Value constants for VAL_chan_stat_inf2 | |
| 383 */ | |
| 384 #define VAL_CHAN_STAT_INF2___DEF (0x0) /* reserved */ | |
| 385 #define NO_FURTH_INFO (0x0) /* no further info can be given */ | |
| 386 #define VAL_CHAN_STAT_INF2___1 (0x1) /* reserved */ | |
| 387 #define VAL_CHAN_STAT_INF2___2 (0x2) /* reserved */ | |
| 388 #define VAL_CHAN_STAT_INF2___3 (0x3) /* reserved */ | |
| 389 #define VAL_CHAN_STAT_INF2___4 (0x4) /* reserved */ | |
| 390 #define LINK_DROPPED (0x5) /* link dropped */ | |
| 391 | |
| 392 /* | |
| 393 * Value constants for VAL_bear_type | |
| 394 */ | |
| 395 #define BT_CSD (0x1) /* bearer type CSD */ | |
| 396 #define BT_GPRS (0x2) /* bearer type GPRS */ | |
| 397 #define BT_DEFAULT (0x3) /* default bearer parameters */ | |
| 398 | |
| 399 /* | |
| 400 * user defined constants | |
| 401 */ | |
| 402 #define MAX_PARTY_NUM_SAT (0x1e0) | |
| 403 #define MAX_SUBADDR_NUM (0x14) | |
| 404 #define MAX_CH_DATA_LEN (0xf1) | |
| 405 #define MAX_CMD_AT_LEN (0xf1) | |
| 406 #define MAX_ALPHA_ID_LEN (0xf1) | |
| 407 #define MAX_SS_STRING_LEN (0x3c) | |
| 408 #define MAX_SAT_USSD_LEN (0xa0) | |
| 409 #define MAX_SMS_DIGIT_LEN (0x14) | |
| 410 #define MAX_SMS_TPDU_LEN (0xb8) | |
| 411 #define MAX_CAP_CNF_LEN (0x70) | |
| 412 #define MAX_TEXT_LEN (0xa0) | |
| 413 #define MAX_EVENT_LIST_LEN (0xa) | |
| 414 #define MAX_TI_LEN (0x10) | |
| 415 #define MAX_DTMF_LEN (0x50) | |
| 416 #define MAX_PROV_F_PATH_LEN (0x10) | |
| 417 #define MAX_BEARER_LIST_LEN (0xfd) | |
| 418 #define MAX_CAUSE_LEN (0x1e) | |
| 419 #define CCR_ALLW_NO_MDFY (0x0) | |
| 420 #define CCR_NOT_ALLW (0x1) | |
| 421 #define CCR_ALLW_WITH_MDFY (0x2) | |
| 422 #define MAX_SAT_APN_LEN (0x66) | |
| 423 #define MAX_URL_LEN (0xfd) | |
| 424 #define MAX_PFP_ELEM (0xa) | |
| 425 | |
| 426 #include "CDG_LEAVE.h" | |
| 427 | |
| 428 | |
| 429 #endif |