diff src/g23m-gsm/alr/alr_nc.c @ 104:27a4235405c6

src/g23m-gsm: import from LoCosto source
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 04 Oct 2016 18:24:05 +0000
parents
children
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/g23m-gsm/alr/alr_nc.c	Tue Oct 04 18:24:05 2016 +0000
@@ -0,0 +1,8488 @@
+/*
++-----------------------------------------------------------------------------
+|  Project :  GSM-PS
+|  Modul   :  ALR_NC
++-----------------------------------------------------------------------------
+|  Copyright 2002 Texas Instruments Berlin, AG
+|                 All rights reserved.
+|
+|                 This file is confidential and a trade secret of Texas
+|                 Instruments Berlin, AG
+|                 The receipt of or possession of this file does not convey
+|                 any rights to reproduce or disclose its contents or to
+|                 manufacture, use, or sell anything it may describe, in
+|                 whole, or in part, without the specific written consent of
+|                 Texas Instruments Berlin, AG.
++-----------------------------------------------------------------------------
+|  Purpose :  This Modul defines the SDL process Idle_Neighbour_Cells.
++-----------------------------------------------------------------------------
+*/
+
+#ifndef ALR_NC_C 
+#define ALR_NC_C
+
+#define ENTITY_PL
+
+/*==== INCLUDES ===================================================*/
+#include <string.h>
+#include <stdlib.h>
+#include <limits.h>
+#include <ctype.h>
+#include "typedefs.h"
+#include "message.h"
+#include "ccdapi.h"
+#include "vsi.h"
+#include "custom.h"
+#include "gsm.h"
+#include "prim.h"
+#include "cnf_alr.h"
+#include "mon_alr.h"
+#include "pei.h"
+#include "tok.h"
+#include "pcm.h"
+#ifdef GPRS
+#include "alr_gprs.h"
+#endif
+
+#if !defined(NTRACE)
+#define TRACING
+#endif  /* !TRACING */
+
+#include "alr.h"
+#include "alr_em.h"
+
+#if defined (REL99) && defined (TI_PS_FF_EMR)
+#define  MAX_MEAN_BEP_VAL 32
+#define  MAX_CV_BEP_VAL   8
+
+/*Here Mean BEP for GMSK is given, since ECSD is not supported
+  it's assumed that 8PSK will not be required as of now*/
+/* These values are derived from sec.8.2.5 of 5.08 
+   The value given under the heading 'log10(actual BEP)' is multiplied
+   by 2^26 to get these values*/
+/*The following values are calculated assuming F6.26 format*/
+const ULONG mbep_map[MAX_MEAN_BEP_VAL] = 
+{ 
+    /******GMSK MAPPING TABLE***/
+    /* 0*/        16856941,
+    /* 1*/        13389560,
+    /* 2*/        10635412,
+    /* 3*/        8448334,
+    /* 4*/        6710886,
+    /* 5*/        5330457,
+    /* 6*/        4233898,
+    /* 7*/        3362825,
+    /* 8*/        2671603,
+    /* 9*/        2121982,
+    /* 10*/       1685103,
+    /* 11*/       1338821,
+    /* 12*/       1063004,
+    /* 13*/       844229,
+    /* 14*/       671088,
+    /* 15*/       532844,
+    /* 16*/       422785,
+    /* 17*/       336215,
+    /* 18*/       267093,
+    /* 19*/       212064,
+    /* 20*/       168443,
+    /* 21*/       133546,
+    /* 22*/       106032,
+    /* 23*/       83886,
+    /* 24*/       67108,
+    /* 25*/       53016,
+    /* 26*/       42278,
+    /* 27*/       33554,
+    /* 28*/       26172,
+    /* 29*/       20803,
+    /* 30*/       16777
+};
+
+/*Refer to sec.8.2.5,  5.08 
+  These values are derived by multiplying CV_BEP X value by 2^8*/
+/*The following values are calculated using F8.8 format: Refer to example at the end of file*/
+const USHORT cvbep_map[MAX_CV_BEP_VAL] = {
+    /* 0*/        512,
+    /* 1*/        448,
+    /* 2*/        384,
+    /* 3*/        320,
+    /* 4*/        256,
+    /* 5*/        192,
+    /* 6*/        128,
+    /* 7*/        64
+};
+#endif
+
+#if !defined(NTRACE) && defined(TRACING)
+LOCAL const char *nc_get_nc_state_str(UBYTE status);
+LOCAL const char * const alr_nc_state_trc[18] = {
+  "INACT",
+  "IDLE",
+  "RD_BCCH",
+  "FB_SB_SYNC",
+  "FB_SB_FAIL",
+  "RD_FB_SB",
+  "RD_SB",
+  "IDLE_SYNC",
+  "EXCL",
+  "FB_SB_SYNC_RR",
+  "RD_SB_BCCH",
+  "RD_BCCH_P",
+  "RD_FB_SB_P",
+  "RD_SB_P",
+  "RD_SB_BCCH_P",
+  "RD_BCCH_RR",
+  "RD_BCCH_P_RR",
+  "???"};
+#endif /* !NTRACE && TRACING */
+LOCAL const UBYTE unc_values[] =
+{
+  2, 4, 8, 12, 16, 22, 30, NOT_PRESENT_8BIT
+};
+typedef enum
+{
+  PRO_STA_SYNC=1,
+  PRO_STA_BCCH=2
+}T_PRO_STA_TYPE;
+/*==== EXPORT =====================================================*/
+
+/*==== PRIVAT =====================================================*/
+LOCAL UBYTE   nc_remove_channel_from_ba_list (USHORT                      index);
+LOCAL UBYTE   nc_is_in_ncell_list            (USHORT                      channel,
+                                              T_MPH_NEIGHBOURCELL_REQ   * ncell_list);
+LOCAL void    nc_process_status              (void);
+LOCAL void    nc_process_status_sync         (void);
+LOCAL void    nc_process_status_last_bsic    (void);
+LOCAL void    nc_process_status_bcch         (void);
+LOCAL BOOL    nc_ncell_in_plmn_permitted     (UBYTE                       bsic);
+LOCAL void    nc_find_cells                  (USHORT                    * c_found,
+                                              USHORT                      max,
+                                              UBYTE                       limitation,
+                                              UBYTE                       min_rxlev);
+LOCAL void    nc_store_rxlev                 (T_MPHC_RXLEV_PERIODIC_IND * report);
+LOCAL void    nc_rank_ncells                 (void);
+LOCAL void    nc_check_status                (UBYTE start_list);
+LOCAL void    nc_build_rr_report_dedi        (T_MPH_MEASUREMENT_IND     * rr_report);
+
+LOCAL void    nc_store_dedicated             (T_MPHC_MEAS_REPORT        * report);
+LOCAL UBYTE   nc_convert_quality             (USHORT                      errors,
+                                              USHORT                      total);
+LOCAL void    nc_store_bcch                  (T_MPHC_DATA_IND           * data_ind,
+                                              USHORT                      index,
+                                              UBYTE                       which);
+LOCAL void    nc_stop_bcch                   (USHORT                      index,
+                                              UBYTE                       new_status);
+LOCAL void    nc_stop_sync                   (USHORT                      index,
+                                              UBYTE                       new_status);
+LOCAL void    nc_clean_store_bcch            (USHORT                      index);
+LOCAL UBYTE   nc_check_bsic                  (USHORT                      index,
+                                              UBYTE                       bsic);
+#if 0
+#if !defined(NTRACE) && defined(TRACING)
+LOCAL UBYTE   nc_get_status                  (USHORT                      index);
+#endif  /* !NTRACE && TRACING */
+#endif /* 0|1 */
+LOCAL void    nc_restart_bcch                (USHORT                      index);
+LOCAL void    nc_set_fb_sb_sync_initial      (USHORT                      index);
+LOCAL void    nc_set_fb_sb_failed            (USHORT                      index,
+                                              UBYTE                       c_sync);
+LOCAL UBYTE   nc_sys_info_78_required        (USHORT                      index);
+LOCAL void    nc_sync_failed_attempt         (USHORT                      index);
+LOCAL void    nc_sync_failed_attempt_dedicated(USHORT                     index);
+LOCAL void    nc_build_rr_report             (T_MPH_MEASUREMENT_IND*      rr_report);
+LOCAL void    nc_release_bcch                (void);
+LOCAL void    nc_find_list_cells             (void);
+LOCAL void    nc_ncell_list_req              (void);
+LOCAL void    nc_start_eotd_confirm          (void);
+LOCAL void    nc_process_pos_req             (T_MPH_NCELL_POS_REQ*        pos_req);
+LOCAL void    nc_check_sync_ind_eotd         (T_MPHC_NCELL_SYNC_IND*      sync_ind,
+                                              USHORT                      arfcn);
+LOCAL void    nc_store_eotd                  (T_eotd_sc_res*              p_res,
+                                              T_MPHC_NCELL_SYNC_IND*      sync_ind,
+                                              USHORT                      arfcn);
+LOCAL void    nc_sync_ind_last_bsic_req      (T_MPHC_NCELL_SYNC_IND*      sync_ind,
+                                              USHORT                      index,
+                                              USHORT                      arfcn,
+                                              UBYTE                       bsic);
+LOCAL void    nc_sync_ind_ncell              (T_MPHC_NCELL_SYNC_IND*      sync_ind,
+                                              USHORT                      index,
+                                              USHORT                      arfcn,
+                                              UBYTE                       bsic);
+LOCAL void    nc_clear_last_bsic             (void);
+#if 0
+Symbol 'nc_stop_all_bcch(void)' 'nc_stop_all_sync(void)' and not referenced at the moment
+LOCAL void    nc_stop_all_bcch               (void);
+LOCAL void    nc_stop_all_sync               (void);
+#endif  /* 0|1 */
+LOCAL void    nc_stop_all                    (void);
+LOCAL void    nc_stop_all_inactive           (void);
+LOCAL void    nc_stop_if_active              (USHORT i);
+LOCAL void    nc_ncell_list_req_pos          (T_ncell_list* p_ncell_list,
+                                              T_ncell_eotd* asd_cell,
+                                              USHORT arfcn);
+LOCAL void    nc_get_timing_eotd             (T_ncell_list* p_ncell_list,
+                                              T_ncell_eotd* asd_cell);
+
+LOCAL BOOL    nc_is_sync                     (T_NC                      * p_ncell);
+LOCAL void    nc_build_sync_req              (USHORT                      index);
+LOCAL void    nc_init_pos_ind                (USHORT req_id);
+LOCAL void    nc_enable_conf                 (void);
+LOCAL void    nc_disable_conf                (BOOL bFree);
+LOCAL void    nc_start_ncell_confirm         (void);
+LOCAL void    nc_handle_new_strong_cells     (void);
+LOCAL void    nc_check_new_strong_cell       (USHORT index, UBYTE o_1of6, UBYTE rxlev);
+#ifdef GPRS
+LOCAL void    nc_rxlev_sc_req                (UBYTE rxlev);
+LOCAL void    nc_inform_grr_of_ncell         (USHORT index,
+                                              UBYTE type);
+LOCAL void    remove_ncell_and_inform_grr    (USHORT index);
+LOCAL void    nc_sync_failed_gprs            (USHORT index);
+LOCAL void    nc_check_bsic_pbcch(T_MPH_NEIGHBOURCELL_REQ* ncell_list);
+LOCAL void    nc_process_status_sync_gprs(void);
+#endif /* #ifdef GPRS */
+
+#if defined(_SIMULATION_)
+LOCAL void    trace_nc(void);
+#endif /* _SIMULATION_ */
+LOCAL void    nc_start_ncsync (void);
+LOCAL void    nc_set_si4_si78                (USHORT                  index, 
+                                              T_MPHC_NCELL_BCCH_IND  *data_ind,
+                                              UBYTE                   sys_info_78);
+LOCAL void nc_highst_field_strng             (USHORT                 *index, 
+                                              T_PRO_STA_TYPE          nc_pro_sta_type);
+#if defined (REL99) && defined (TI_PS_FF_EMR)
+/*Functions related to EMR */
+LOCAL void nc_fill_ncell_enh_meas_results( T_MPH_MEASUREMENT_IND *p_rep);
+LOCAL void nc_sort_cells_into_bins(T_enh_bin *p_sbin,
+                                   T_enh_bin *p_mbin,
+                                   T_enh_bin *p_rbin);
+LOCAL UBYTE get_band_index_for_emr (USHORT arfcn);
+LOCAL void nc_sort_and_store_meas_results(T_NC *pcell, T_enh_bin *p_bin, UBYTE nbr_rpt, 
+                                          T_MPH_MEASUREMENT_IND *p_rep);
+LOCAL UBYTE nc_scale_rxlev (UBYTE scale, UBYTE no_of_cells, UBYTE *rx_lev);
+LOCAL void nc_fill_serv_cell_enh_meas_results(T_MPH_MEASUREMENT_IND *p_rep);
+LOCAL UBYTE nc_map_mean_bep(ULONG value);
+LOCAL UBYTE nc_map_cv_bep(USHORT  value);
+LOCAL void nc_process_status_sync_emr(void);
+LOCAL void nc_add_to_rest(T_enh_bin *p_r, T_enh_bin *p_b, UBYTE start_index);
+LOCAL void nc_sort_rest(T_MPH_MEASUREMENT_IND *p_rep, T_enh_bin *p_bin);
+LOCAL void nc_swap_bin_content (T_enh_bin *p_bin, UBYTE i, UBYTE j );
+#endif
+
+#if defined (TI_PS_FF_RTD) && defined (REL99)
+LOCAL UINT nc_sync_fn_offset_calculation(USHORT rtd_value);
+LOCAL UINT nc_sync_time_alignment_calculation(USHORT rtd_value);
+#endif
+#ifdef TI_PS_FF_QUAD_BAND_SUPPORT
+LOCAL BOOL nc_compare_bsic_std (UBYTE bsic_std);
+#endif
+/*==== CONSTANTS ==================================================*/
+#define MAX_L1_SYNC_CNT         12
+#define MAX_L1_BCCH_CNT          6
+#define MAX_L1_SYNC_EOTD_CNT    14
+#define MAX_RR_NCELL_CNT         6
+
+#define ONLY_BCC                 7
+#define ONLY_BSIC               63
+
+#define NC_CHECK_OK             0
+#define NC_CHECK_NCC_FAILED     1
+#define NC_CHECK_BSIC_CHANGED   2
+
+#define CHECK_FOR_ACQUIRE_AND_BCCH_AND_FAIL 0
+#define CHECK_FOR_CONFIRM                   1
+
+#define DONT_FREE_POS_IND                   0
+#define FREE_POS_IND                        1
+
+/*
+ * Counter to realize a time interval of 10sec in terms of Control Multiframe
+ *  Idle state       :  42 * 51 * 4.615ms     = 9885ms
+ *  Dedicated State  :  42 * 104/2 * 4.615ms  = 10079ms
+ */
+#define TEN_SECONDS_NCSYNC        42
+
+#define TEN_SECONDS        1
+#define TWENTY_SECONDS     2
+#define THIRTY_SECONDS     3
+#define FIVE_MINUTES       30
+#define C_INVALID_SYNC     (THIRTY_SECONDS+1)
+/* +2 for rounding BCCH reading to confirmation boundary */
+#define C_INVALID_BCCH     (FIVE_MINUTES+2+1)
+
+#ifdef GPRS
+#define GRR_SB_FOUND     (MPH_BSIC_UNKNOWN+1)
+#define GRR_SB_NOT_FOUND  NOT_PRESENT_8BIT
+#define GRR_SB_UNKNOWN    MPH_BSIC_UNKNOWN
+#endif
+
+/*==== VARIABLES ==================================================*/
+#ifdef TI_PS_FF_QUAD_BAND_SUPPORT
+UBYTE alr_multiband_std = NOT_PRESENT_8BIT;
+#endif
+
+/*==== FUNCTIONS ==================================================*/
+#if defined (WIN32) && !defined (_SIMULATION_)
+#define _SIMULATION_
+#endif
+
+#if defined (_SIMULATION_)
+#define TRACING
+#endif  /* _SIMULATION_ */
+
+/*
+ * Defining Locosto flag for 20.7 for Simulation build
+ */
+#if defined (_SIMULATION_) && defined SIMU_LOCOSTO_CT_GCF_20_7
+#define CHIPSET 15
+#endif
+
+/*
+ * some traces
+ */
+#if defined (TRACING)
+#define ALR_TRACE_NC(a)  ALR_TRACE(a)
+#define ALR_TRACE_NC_CNT(a,b)     TRACE_EVENT_P2 ("[%4u] c_sync %d", \
+                                    ARFCN_TO_G23(a)&ARFCN_MASK, b)
+#define ALR_TRACE_NC_BSIC_CNF(a)  TRACE_EVENT_P1 ("[%4u] NC BSIC CNF passed", \
+                                    ARFCN_TO_G23(a)&ARFCN_MASK)
+#define ALR_TRACE_NC_SB_FAILED(a) TRACE_EVENT_P1 ("[%4u] NCELL SB IND failed", \
+                                    ARFCN_TO_G23(a)&ARFCN_MASK)
+#define ALR_TRACE_NC_BSIC_REQ(a)  TRACE_EVENT_P4 ("[%4u] NC BSIC REQ  %d %d %d", \
+                                    a&ARFCN_MASK, GET_STATE (STATE_NC), \
+                                    alr_data->nc_data.cell[LAST_BSIC_REQ].status, \
+                                    alr_data->nc_data.c_bcch_req)
+#define ALR_TRACE_NC_BCCH_OK(f,m)  TRACE_EVENT_P2 ("[%4u] NCELL BCCH IND passed msg:%d", \
+                                    f&ARFCN_MASK,m)
+#define ALR_TRACE_NC_SB_IND_PASSED(f) TRACE_EVENT_P1 ("[%4u] NCELL SB IND passed", \
+                                        f&ARFCN_MASK)
+#define ALR_TRACE_NC_RESELECT(a)   TRACE_EVENT_P1 ("[%4u] start reselect", a&ARFCN_MASK)
+#define ALR_TRACE_NC_FN_TA(_i,f,t)  TRACE_EVENT_P3 ("i %d, fn %d, ta %d ", _i, f, t)
+#if 0
+#define GET_NC_STATE(i)             nc_get_status(i)
+#endif /* 0|1 */
+#if defined(_SIMULATION_)
+#define ALR_TRACE_ALL_NC()          trace_nc()
+#else /* _SIMULATION_ */
+#define ALR_TRACE_ALL_NC()
+#endif /* _SIMULATION_ */
+#else /* TRACING */
+#define ALR_TRACE_NC(a)
+#define ALR_TRACE_NC_CNT(a,b)
+#define ALR_TRACE_NC_BSIC_CNF(a)
+#define ALR_TRACE_NC_SB_FAILED(a)
+#define ALR_TRACE_NC_BSIC_REQ(a)
+#define ALR_TRACE_NC_BCCH_OK(f,m)
+#define ALR_TRACE_NC_SB_IND_PASSED(f)
+#define ALR_TRACE_NC_RESELECT(a)
+#define ALR_TRACE_NC_FN_TA(i,f,t)
+#define GET_NC_STATE(i)                 alr_data->nc_data.cell[i].status
+#define ALR_TRACE_ALL_NC()
+#undef  TRACE_EVENT
+#undef  TRACE_EVENT_P1
+#undef  TRACE_EVENT_P2
+#undef  TRACE_EVENT_P3
+#undef  TRACE_EVENT_P4
+#undef  TRACE_EVENT_P5
+#undef  TRACE_EVENT_P6
+#undef  TRACE_EVENT_P7
+#undef  TRACE_EVENT_P8
+#undef  TRACE_EVENT_P9
+#define TRACE_EVENT(s)
+#define TRACE_EVENT_P1(s,a)
+#define TRACE_EVENT_P2(s,a,b)
+#define TRACE_EVENT_P3(s,a,b,c)
+#define TRACE_EVENT_P4(s,a,b,c,d)
+#define TRACE_EVENT_P5(s,a,b,c,d,e)
+#define TRACE_EVENT_P6(s,a,b,c,d,e,f)
+#define TRACE_EVENT_P7(s,a,b,c,d,e,f,g)
+#define TRACE_EVENT_P8(s,a,b,c,d,e,f,g,h)
+#define TRACE_EVENT_P9(s,a,b,c,d,e,f,g,h,i)
+#endif /* TRACING */
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_init                    |
++--------------------------------------------------------------------+
+
+  PURPOSE : Initialize Idle Neighbour Cell Process.
+
+*/
+GLOBAL void nc_init (void)
+{
+  GET_INSTANCE_DATA;
+
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+  UBYTE i;
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */ 
+
+#ifdef TI_PS_FF_QUAD_BAND_SUPPORT
+  alr_multiband_std                            = NOT_PRESENT_8BIT;
+#endif
+
+  nc_stop_all();
+  alr_data->nc_data.c_ba_arfcn                 = 0;
+  alr_data->nc_data.ba_id                      = ALR_BA_LOW;
+  alr_data->nc_data.sc_included                = FALSE;
+  alr_data->nc_data.cell[LAST_BSIC_REQ].status = IDLE;
+  alr_data->nc_data.cell[LAST_BSIC_REQ].ba_arfcn = NOT_PRESENT_16BIT;
+  alr_data->nc_data.c_reports                  = (UBYTE)-1;
+  alr_data->nc_data.cr_cell.ba_arfcn           = NOT_PRESENT_16BIT;
+  alr_data->nc_data.tim_state                  = NC_TIM_STOPPED;
+  alr_data->nc_data.c_nc_timer                 = 0;
+  if (alr_data->nc_data.ppos_ind NEQ NULL)
+  {
+    PFREE(alr_data->nc_data.ppos_ind);
+    alr_data->nc_data.ppos_ind = NULL;
+  }
+  if (alr_data->nc_data.ppos_req NEQ NULL)
+  {
+    PFREE(alr_data->nc_data.ppos_req);
+    alr_data->nc_data.ppos_req = NULL;
+  }
+  
+  /* Initialize the counter for realizing 10sec  timer  value */
+  alr_data->nc_data.c_ncsync_tim = 0;
+  alr_data->nc_data.ncsync_start_tim = 0;
+  
+  SET_STATE(STATE_NC_PROC, NC_ACQUIRE);
+  SET_STATE(STATE_NC, NC_NULL);
+#if defined (REL99) && defined (TI_PS_FF_EMR)
+  alr_data->nc_data.si2_count = NOT_PRESENT_8BIT;
+  alr_data->nc_data.emr_data.rep_type = REP_TYPE_NORM;
+#endif
+
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+  alr_data->nc_data.nxt_ind = 0;
+  for(i = 0;i < MAX_NEIGHBOURCELLS;i++)
+  {
+    alr_data->nc_data.cell[i].frame_offset=0 ;
+    alr_data->nc_data.cell[i].time_align=0;
+    alr_data->nc_data.cell[i].c_sync_req=0;
+  } 
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+
+}
+
+#ifdef GPRS
+/*
++----------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_GPRS                     |
+| STATE   : code                ROUTINE : nc_start_pbcch|
++----------------------------------------------------------------------+
+
+  PURPOSE :Checks whether pbcch is available and sets a relevant state.
+
+*/
+
+GLOBAL void nc_start_pbcch(void)
+{
+  GET_INSTANCE_DATA;
+  if(alr_data->gprs_data.ptm AND
+     alr_data->gprs_data.pbcch)
+  {
+    SET_STATE(STATE_NC, NC_PTM_PBCCH);
+  }
+  else if(alr_data->gprs_data.pbcch)
+  {
+    SET_STATE(STATE_NC, NC_PIM_PBCCH);
+  }
+
+  nc_enable_conf();
+  nc_process_status();
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_GPRS                   |
+| STATE   : code                ROUTINE : gprs_check_bsic_pbcch      |
++--------------------------------------------------------------------+
+
+  PURPOSE :
+
+*/
+LOCAL void nc_check_bsic_pbcch(T_MPH_NEIGHBOURCELL_REQ* ncell_list)
+{
+  GET_INSTANCE_DATA;
+  TRACE_EVENT("gprs_alr_check_bsic_pbcch");
+  if(!alr_data->gprs_data.pbcch) return;
+
+  if(ncell_list->sync_only EQ SYNC_LIST)
+  {
+
+    USHORT  n_rr;     /* index of RR neighbor cell list */
+    USHORT  n_alr;    /* index of ALR neighbor cell list */
+    UBYTE   last_alr; /* last index of ALR neighbor cell list */
+    USHORT  arfcn;
+    TRACE_EVENT("pbcch/check bsic");
+
+    /*
+     * remove all channels which are not longer member of the
+     * neighbour cell list.
+     */
+    last_alr = alr_data->nc_data.c_ba_arfcn;  /* current last index */
+    for (n_alr = 0; n_alr < last_alr; n_alr++)
+    {
+      arfcn = alr_data->nc_data.cell[n_alr].ba_arfcn;
+      if (!nc_is_in_ncell_list (arfcn, ncell_list))
+      /* AND
+          (arfcn NEQ alr_data->serving_cell))*/
+      {
+        switch(alr_data->nc_data.cell[n_alr].status)
+        {
+          case READ_FB_SB:
+          case READ_FB_SB_PENDING:
+          case READ_SB_PENDING:
+          case READ_SB:
+          case READ_SB_BCCH: /* in case we come from BCCH */
+          case INACTIVE: /* in case we returned from DEDIC */
+          case IDLE:     /* in case we returned from DEDIC */
+          case EXCLUDED: /* in case we returned from DEDIC */
+            TRACE_EVENT_P1("rem cell i%d",n_alr);
+            remove_ncell_and_inform_grr(n_alr);
+            last_alr = alr_data->nc_data.c_ba_arfcn;
+            n_alr--;
+            break;
+          case FB_SB_SYNC_RR_NOT_INFORMED:
+          case READ_BCCH_RR_NOT_INFORMED:
+          case READ_BCCH:
+          case FB_SB_SYNC:
+          case IDLE_SYNC:
+          case FB_SB_FAILED:
+            /*state change will be done with check_status*/
+            TRACE_EVENT_P1("i%d reset 1o6", n_alr);
+            alr_data->nc_data.cell[n_alr].one_of_six    = FALSE;
+            alr_data->nc_data.cell[n_alr].one_of_twelve = FALSE;
+            break;
+          default:
+            TRACE_EVENT_P3("i%d,arfcn:%d illegal status %d",n_alr,
+                              alr_data->nc_data.cell[n_alr].ba_arfcn,
+                              alr_data->nc_data.cell[n_alr].status);
+            break;
+        }
+      }
+      else
+      { /* ncell is in both lists */
+        switch(alr_data->nc_data.cell[n_alr].status)
+        {
+          case READ_FB_SB:
+          /* case READ_FB_SB_PENDING:
+            *case READ_SB_PENDING: 
+            */
+          case READ_SB:
+            break;
+          case READ_SB_BCCH: /* in case we come from BCCH */
+            nc_set_status(n_alr, READ_SB);
+            break;
+          case INACTIVE: /* in case we returned from DEDIC */
+          case IDLE:     /* in case we returned from DEDIC */
+          case EXCLUDED: /* in case we returned from DEDIC */
+            nc_set_status (n_alr, INACTIVE);
+            /* ALR does not receive measurements */
+            /* set them to idle */
+            nc_set_status (n_alr, IDLE);
+            /* and set it to one_of_six , the rest is done by check_status */
+            nc_set_status(n_alr, READ_FB_SB);
+            break;
+          case FB_SB_SYNC_RR_NOT_INFORMED:
+          case READ_BCCH_RR_NOT_INFORMED:
+          case READ_BCCH:
+            nc_set_status(n_alr, FB_SB_SYNC);
+            break;
+          default:
+            break;
+        }
+        alr_data->nc_data.cell[n_alr].one_of_six    = FALSE;
+        alr_data->nc_data.cell[n_alr].one_of_twelve = TRUE;
+      }
+    }
+
+    /*
+     * add all new channels.
+     */
+    for (n_rr = 0;
+         (n_rr < MAX_NEIGHBOURCELLS) AND (last_alr < BA_LIST_SIZE-1);
+         n_rr++)
+    {
+      arfcn = ncell_list->arfcn[n_rr];
+      if (arfcn EQ NOT_PRESENT_16BIT)
+        break;  /* no more entries in the RR ncell_list */
+
+      n_alr = nc_get_index (arfcn);
+
+      if (((n_alr EQ NOT_PRESENT_16BIT) OR (n_alr EQ LAST_BSIC_REQ)) AND
+          (arfcn NEQ alr_data->serving_cell))
+      {
+        T_NC* pcell = &alr_data->nc_data.cell[last_alr];
+
+#if defined(TRACING)
+        TRACE_EVENT_P2 ("NC%u[%u] add", last_alr, arfcn);
+#endif  /* TRACING */
+        pcell->ba_arfcn = arfcn;
+        nc_set_status (last_alr, INACTIVE);
+        /* ALR does not receive measurements */
+        /* set them to idle */
+        nc_set_status (last_alr, IDLE);
+        /* and set it to one_of_six , the rest is done by check_status */
+        alr_data->nc_data.cell[last_alr].one_of_six    = FALSE;
+        alr_data->nc_data.cell[last_alr].one_of_twelve = TRUE;
+        alr_data->nc_data.cell[last_alr].ba_status = IN_BA;
+        last_alr++; /* increment last index */
+      }
+    }
+    alr_data->nc_data.c_ba_arfcn = last_alr;  /* store new last index */
+    ALR_TRACE_ALL_NC ();
+
+    {
+      UBYTE six=0;
+      last_alr = alr_data->nc_data.c_ba_arfcn;  /* current last index */
+      for (n_alr = 0; n_alr < last_alr; n_alr++)
+      {
+        six += alr_data->nc_data.cell[n_alr].one_of_six;
+      }
+      /*XXX change this to handle 12 ncells */
+      if(six > 6)
+      {
+        TRACE_ERROR("more then six candidates!");
+      }
+    }
+#if 0 /*only for easing debugging */
+    /*
+     * Reorder the entries. The goal is that the propably strongest neigbour
+     * cells
+     * are measured in the first measurement period of a subsequent
+     * MPHC_RXLEV_PERIODIC_REQ/IND. The appropriate arfcn's are the first
+     * ones in
+     * ncell_list->arfcn
+     */
+    {
+      T_NC temp, *prr, *palr;
+
+      for (n_rr = 0; n_rr < 7; n_rr++)
+      {
+        if(ncell_list->arfcn[n_rr] NEQ NOT_PRESENT_16BIT)
+          n_alr = nc_get_index (ncell_list->arfcn[n_rr]);
+        else
+          break;
+
+        if ( ((n_alr NEQ NOT_PRESENT_16BIT) OR (n_alr NEQ LAST_BSIC_REQ)) AND
+             n_rr NEQ n_alr)
+        {
+          palr = &(alr_data->nc_data.cell[n_alr]);
+          prr  = &(alr_data->nc_data.cell[n_rr]);
+          memcpy(&temp, palr,  sizeof(T_NC));
+          memcpy(palr,  prr,   sizeof(T_NC));
+          memcpy(prr,   &temp, sizeof(T_NC));
+        /*TRACE_EVENT_P4("reordered NC%u[%u] and NC%u[%u]",
+                          n_rr,
+                          ncell_list->arfcn[n_rr],
+                          n_alr, ncell_list->arfcn[n_alr]);*/
+        }
+      }
+    }
+#endif
+    nc_check_status(CHECK_FOR_ACQUIRE_AND_BCCH_AND_FAIL);
+
+    if(alr_data->nc_sync_with_grr)
+    {
+      TRACE_EVENT("sync_with_grr");
+      last_alr = alr_data->nc_data.c_ba_arfcn;  /* current last index */
+      for (n_alr = 0; n_alr < last_alr; n_alr++)
+      {
+         if(alr_data->nc_data.cell[n_alr].one_of_twelve EQ FALSE)
+         {
+            TRACE_EVENT_P1("Cell %d not in requested list",alr_data->nc_data.cell[n_alr].ba_arfcn);
+            continue;
+         }
+          
+        switch(alr_data->nc_data.cell[n_alr].status)
+        {
+          case IDLE_SYNC:
+          case FB_SB_SYNC:
+          case READ_SB:
+          case READ_SB_PENDING:
+          case READ_FB_SB_PENDING:
+            TRACE_EVENT_P1("sync %d",alr_data->nc_data.cell[n_alr].ba_arfcn);
+            nc_inform_grr_of_ncell(n_alr, GRR_SB_FOUND);
+            break;
+          case FB_SB_FAILED:
+          case EXCLUDED:
+          case INACTIVE:
+          case IDLE:
+            TRACE_EVENT_P1("sync %d",alr_data->nc_data.cell[n_alr].ba_arfcn);
+            nc_inform_grr_of_ncell(n_alr, GRR_SB_NOT_FOUND);
+            break;
+          /* READ_FB_SB ->the cell will be synchronized next
+             and a result will be returnded anyway */
+          default:
+            break;
+        }
+      }
+      alr_data->nc_sync_with_grr=FALSE;
+    }
+
+    switch(GET_STATE(STATE_NC))
+    {
+      case NC_PIM_PBCCH:
+      case NC_PTM_PBCCH:
+        nc_process_status();
+        break;
+      default:
+        break;
+    }
+  }
+  else if(ncell_list->sync_only EQ RECONFIRM_SYNC_LIST)
+  {
+     nc_ncsync_tim_expiry();
+  }
+
+}
+
+#endif
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_stop                    |
++--------------------------------------------------------------------+
+
+  PURPOSE : stop the neighbourcell process. Is called by main process
+            if a recovery with power measurements is started.
+
+*/
+
+GLOBAL void nc_stop (void)
+{
+  /*
+   * clean or neighbourcells of the BA and LAST_BSIC_REQ list if needed
+   */
+  nc_stop_all_inactive();
+
+  /*
+   * initialize neighbourcell process and stops timer
+   */
+  nc_init();
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_is_in_ba                |
++--------------------------------------------------------------------+
+
+  PURPOSE : Check whether given ARFCN belongs to BA list, Serving cell.
+
+*/
+
+GLOBAL BOOL nc_is_in_ba(USHORT arfcn)
+{
+  GET_INSTANCE_DATA;
+  UBYTE i;
+  T_NC*   pcell;
+
+  for (i = 0, pcell = &alr_data->nc_data.cell[0]; i < alr_data->nc_data.c_ba_arfcn; i++, pcell++ )
+  {
+    
+    if (arfcn EQ pcell->ba_arfcn OR
+        arfcn EQ alr_data->serving_cell)
+    {
+      return TRUE;
+    }
+  }
+  return FALSE;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_stop_all_inactive       |
++--------------------------------------------------------------------+
+
+  PURPOSE : This stops all activities to bring a channel to state NC_NULL.
+
+*/
+
+LOCAL void nc_stop_all_inactive (void)
+{
+  GET_INSTANCE_DATA;
+  UBYTE i, stopped_sync=0, stopped_bcch=0;
+  /*
+   * depending on the current status
+   */
+  for (i = 0; i < alr_data->nc_data.c_ba_arfcn; i++)
+  {
+    switch (alr_data->nc_data.cell[i].status)
+    {
+      case READ_FB_SB_PENDING:
+      case READ_SB_PENDING:
+      case READ_SB_BCCH_PENDING:
+        /*
+         * stop the current running request for synchronisation in layer 1.
+         */
+        nc_set_status (i, INACTIVE);
+        stopped_sync++;
+        break;
+
+      case READ_BCCH_PENDING:
+      case READ_BCCH_PENDING_RR_NOT_INFORMED:
+        /*
+         * stop the current running request for BCCH reading in layer 1.
+         * If sys info 4 is already stored, but sys info 7 or 8 is requested
+         * clear also a stored BCCH message.
+         */
+        nc_set_status (i, INACTIVE);
+        stopped_bcch++;
+        break;
+      default:
+        /*
+         * sys infos are stored, but RR is still not informed.
+         * Then clean the stored message
+         */
+        nc_set_status (i, INACTIVE);
+        break;
+    }
+  }
+  switch (alr_data->nc_data.cell[LAST_BSIC_REQ].status)
+  {
+    case READ_FB_SB_PENDING:
+      nc_set_status (LAST_BSIC_REQ, IDLE);
+      alr_data->nc_data.cell[LAST_BSIC_REQ].ba_arfcn = NOT_PRESENT_16BIT;
+      stopped_sync++;
+      break;
+    case READ_BCCH_PENDING:
+      nc_set_status (LAST_BSIC_REQ, IDLE);
+      alr_data->nc_data.cell[LAST_BSIC_REQ].ba_arfcn = NOT_PRESENT_16BIT;
+      stopped_bcch++;
+      break;
+  }
+
+  /*send to L1*/
+  if (stopped_sync > 0)
+  { /* stop all synchronizations */
+    PALLOC (stop_req, MPHC_STOP_NCELL_SYNC_REQ);
+    stop_req->radio_freq_array_size = MAX_L1_SYNC_CNT;
+    PSENDX(L1, stop_req);
+  }
+  if (stopped_bcch > 0)
+  { /* stop all bcch */
+    PALLOC (stop_req, MPHC_STOP_NCELL_BCCH_REQ);
+    stop_req->radio_freq_array_size = MAX_L1_BCCH_CNT;
+    PSENDX(L1, stop_req);
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_stop_all                |
++--------------------------------------------------------------------+
+
+  PURPOSE : This stops all activities to bring a channel
+            its corresping READ_ state.
+
+*/
+
+LOCAL void nc_stop_all (void)
+{
+  GET_INSTANCE_DATA;
+  UBYTE i, stopped_sync=0, stopped_bcch=0;
+  /*
+   * depending on the current status
+   */
+  for (i = 0; i < alr_data->nc_data.c_ba_arfcn; i++)
+  {
+    switch (alr_data->nc_data.cell[i].status)
+    {
+      case READ_FB_SB_PENDING:
+        nc_set_status (i, READ_FB_SB);
+        stopped_sync++;
+        break;
+      case READ_SB_PENDING:
+        nc_set_status (i, READ_SB);
+        stopped_sync++;
+        break;
+      case READ_SB_BCCH_PENDING:
+        nc_set_status (i, READ_SB_BCCH);
+        stopped_sync++;
+        break;
+      case READ_BCCH_PENDING:
+        nc_set_status (i, READ_BCCH);
+        stopped_bcch++;
+        break;
+      case READ_BCCH_PENDING_RR_NOT_INFORMED:
+        nc_set_status (i, READ_BCCH_RR_NOT_INFORMED);
+        stopped_bcch++;
+        break;
+      case FB_SB_SYNC_RR_NOT_INFORMED:
+        nc_set_status (i, READ_BCCH_RR_NOT_INFORMED);
+        break;
+    }
+  }
+  switch (alr_data->nc_data.cell[LAST_BSIC_REQ].status)
+  {
+    case READ_FB_SB_PENDING:
+      nc_set_status (LAST_BSIC_REQ, READ_FB_SB);
+      stopped_sync++;
+      break;
+    case READ_BCCH_PENDING:
+      nc_set_status (LAST_BSIC_REQ, READ_BCCH);
+      stopped_bcch++;
+      break;
+  }
+  /*send to L1*/
+  if ( stopped_sync > 0 OR
+       alr_data->nc_data.c_sync_req > 0 OR
+       (alr_data->nc_data.eotd_avail AND GET_STATE(STATE_NC_PROC) EQ NC_CONFIRM))
+  { /* stop all synchronizations if waiting for any NC synchronization (or 2nd SC in EOTD case) */
+    PALLOC (stop_req, MPHC_STOP_NCELL_SYNC_REQ);
+    stop_req->radio_freq_array_size = MAX_L1_SYNC_CNT;
+    PSENDX(L1, stop_req);
+    alr_data->nc_data.c_sync_req=0;
+    if (alr_data->nc_data.eotd_avail)
+      SET_STATE(STATE_NC_PROC, NC_ACQUIRE);
+  }
+  if(stopped_bcch > 0)
+  { /* stop all bcch */
+    PALLOC (stop_req, MPHC_STOP_NCELL_BCCH_REQ);
+    stop_req->radio_freq_array_size = MAX_L1_BCCH_CNT;
+    PSENDX(L1, stop_req);
+    alr_data->nc_data.c_bcch_req=0;
+  }
+}
+
+#if 0
+Symbol 'nc_stop_all_bcch(void)' not referenced at the moment
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_stop_all_sync           |
++--------------------------------------------------------------------+
+
+  PURPOSE : This stops all sync activities.
+
+*/
+LOCAL void nc_stop_all_sync (void)
+{
+  UBYTE i, stopped_sync=0;
+  /*
+   * depending on the current status
+   */
+  for (i = 0; i < alr_data->nc_data.c_ba_arfcn; i++)
+  {
+    switch (alr_data->nc_data.cell[i].status)
+    {
+      case READ_FB_SB_PENDING:
+        nc_set_status (i, READ_FB_SB);
+        stopped_sync++;
+        break;
+      case READ_SB_PENDING:
+        nc_set_status (i, READ_SB);
+        stopped_sync++;
+        break;
+      case READ_SB_BCCH_PENDING:
+        nc_set_status (i, READ_SB_BCCH);
+        stopped_sync++;
+        break;
+    }
+  }
+  switch (alr_data->nc_data.cell[LAST_BSIC_REQ].status)
+  {
+    case READ_FB_SB_PENDING:
+      nc_set_status (LAST_BSIC_REQ, READ_FB_SB);
+      stopped_sync++;
+      break;
+  }
+  /*send to L1*/
+  if (stopped_sync > 0)
+  { /* stop all synchronizations */
+    PALLOC (stop_req, MPHC_STOP_NCELL_SYNC_REQ);
+    stop_req->radio_freq_array_size = MAX_L1_SYNC_CNT;
+    PSENDX(L1, stop_req);
+    alr_data->nc_data.c_sync_req=0;
+  }
+}
+#endif  /* 0|1 */
+
+#if 0
+Symbol 'nc_stop_all_bcch(void)' not referenced at the moment
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_stop_all_bcch           |
++--------------------------------------------------------------------+
+
+  PURPOSE : This stops all activities to bring a channel to state NC_NULL.
+
+*/
+LOCAL void nc_stop_all_bcch (void)
+{
+  UBYTE i, stopped_bcch=0;
+  /*
+   * depending on the current status
+   */
+  for (i = 0; i < alr_data->nc_data.c_ba_arfcn; i++)
+  {
+    switch (alr_data->nc_data.cell[i].status)
+    {
+      case READ_BCCH_PENDING_RR_NOT_INFORMED:
+        nc_set_status (i, READ_BCCH_RR_NOT_INFORMED);
+        stopped_bcch++;
+        break;
+      case READ_BCCH_PENDING:
+        nc_set_status (i, READ_BCCH);
+        stopped_bcch++;
+        break;
+    }
+  }
+  switch (alr_data->nc_data.cell[LAST_BSIC_REQ].status)
+  {
+    case READ_BCCH_PENDING:
+      nc_set_status (LAST_BSIC_REQ, READ_BCCH);
+      stopped_bcch++;
+      break;
+  }
+  /*send to L1*/
+  if (stopped_bcch > 0)
+  { /* stop all bcch */
+    PALLOC (stop_req, MPHC_STOP_NCELL_BCCH_REQ);
+    stop_req->radio_freq_array_size = MAX_L1_BCCH_CNT;
+    PSENDX(L1, stop_req);
+    alr_data->nc_data.c_bcch_req=0;
+  }
+}
+#endif  /* 0|1 */
+
+LOCAL void nc_clear_last_bsic(void)
+{
+  GET_INSTANCE_DATA;
+  switch (alr_data->nc_data.cell[LAST_BSIC_REQ].status)
+  {
+    case READ_BCCH_PENDING:
+      nc_stop_bcch (LAST_BSIC_REQ, IDLE);
+      break;
+    case READ_FB_SB_PENDING:
+      nc_stop_sync (LAST_BSIC_REQ, IDLE);
+      break;
+  }
+
+  nc_set_status(LAST_BSIC_REQ, IDLE);
+  alr_data->nc_data.cell[LAST_BSIC_REQ].ba_arfcn = NOT_PRESENT_16BIT;
+
+}
+
+LOCAL void nc_stop_if_active(USHORT i)
+{
+  GET_INSTANCE_DATA;
+  /*
+   * the requested channel number is member of the BA list.
+   * clear a request to layer 1 if needed.
+   */
+  switch(alr_data->nc_data.cell[i].status)
+  {
+    case READ_SB_PENDING:
+      nc_stop_sync (i, READ_SB);
+      break;
+    case READ_SB_BCCH_PENDING:
+      nc_stop_sync (i, READ_SB_BCCH);
+      break;
+    case READ_FB_SB_PENDING:
+      nc_stop_sync (i, READ_FB_SB);
+      break;
+    case READ_BCCH_PENDING:
+      nc_stop_bcch (i, READ_BCCH);
+      break;
+    case READ_BCCH_PENDING_RR_NOT_INFORMED:
+      nc_stop_bcch (i, READ_BCCH_RR_NOT_INFORMED);
+      break;
+    default:
+      break;
+  }
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_ncell_list              |
++--------------------------------------------------------------------+
+
+  PURPOSE : Reception of a new neighbourcell list from RR.
+
+*/
+
+GLOBAL void nc_ncell_list (T_MPH_NEIGHBOURCELL_REQ * mph_neighbourcell_req)
+{
+  GET_INSTANCE_DATA;
+  UBYTE i, j;
+  switch (GET_STATE (STATE_NC))
+  {
+    case NC_DEDICATED:
+      {
+        UBYTE  c_ba_arfcn;
+        PALLOC (upd_dedi, MPHC_UPDATE_BA_LIST);
+
+        /*
+         * mix new list with old list
+         */
+        nc_update_ba_list (alr_data->serving_cell,
+                           mph_neighbourcell_req);
+
+        /*
+         * create new list for layer 1
+         */
+        c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+        for (i = 0, j = 0; i < c_ba_arfcn; i++)
+        {
+          if (alr_data->nc_data.cell[i].ba_status EQ IN_BA)
+            upd_dedi->chan_list.radio_freq[j++] =
+              ARFCN_TO_L1(alr_data->nc_data.cell[i].ba_arfcn);
+        }
+
+        /*
+         * send new list to layer 1
+         */
+        upd_dedi->num_of_chans = j;
+
+        alr_data->nc_data.ba_id = ALR_ALLOCATE_NEW_BA ( alr_data->nc_data.ba_id );
+        upd_dedi->ba_id = alr_data->nc_data.ba_id;
+
+        upd_dedi->pwrc = alr_data->nc_data.pwrc;
+        upd_dedi->dtx_allowed = alr_data->nc_data.dtx;
+
+        alr_data->nc_data.update = TRUE;
+        ma_nc_update_ba_list (upd_dedi);
+
+      }
+      break;
+    case NC_CON_EST: /*for PBCCH just update the list, is checked in
+                       nc_check_bsic_pbcch */
+#ifdef GPRS
+    case NC_PIM_PBCCH:
+    case NC_PTM_PBCCH:
+      nc_check_bsic_pbcch(mph_neighbourcell_req);
+#endif
+      break;
+    default:
+      /*
+       * idle mode
+       */
+      ALR_TRACE_NC ("ncell req in idle");
+
+      /*
+       * mix new list with old list
+       */
+      nc_update_ba_list (alr_data->serving_cell, mph_neighbourcell_req);
+
+      /*
+       * configure layer 1 and start monitoring on new list
+       */
+      nc_start_monitoring();
+      break;
+  }
+  return;
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_start_monitoring        |
++--------------------------------------------------------------------+
+
+  PURPOSE : Configure layer 1 with a new list for neighbourcell
+            measurements.
+
+*/
+
+static const UBYTE NO_OF_REPORTS [8] =
+{
+  10, 7, 5, 4, 3, 3, 2, 2
+};
+
+static const UBYTE INIT_OF_C_REPORTS [8] =
+{
+  5, 5, 2, 2, 1, 1, 0, 0  /* empirical for FTA 20.7, 20.19, for TC 084, 047  */
+};
+
+static BOOL first_period = FALSE, first_l1_meas = FALSE;
+
+GLOBAL void nc_start_monitoring (void)
+{
+  GET_INSTANCE_DATA;
+  USHORT  index, prim_index;
+  UBYTE   report_idx = alr_data->bs_pa_mfrms;
+  UBYTE   c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+  PALLOC (update, MPHC_RXLEV_PERIODIC_REQ);
+
+  ALR_TRACE_NC ("nc_start_mon");
+
+  first_period = first_l1_meas = TRUE;
+
+  alr_data->nc_data.max_reports = NO_OF_REPORTS [report_idx];
+  alr_data->nc_data.fn_offset   = (report_idx+2) * NO_OF_REPORTS[report_idx] * 51;
+
+  if (alr_data->nc_data.c_reports EQ (UBYTE)-1) /* initial value */
+    alr_data->nc_data.c_reports = INIT_OF_C_REPORTS [report_idx];
+  else  /* don´t touch c_reports except for max_reports is less */
+    if (alr_data->nc_data.c_reports >= alr_data->nc_data.max_reports)
+      alr_data->nc_data.c_reports = alr_data->nc_data.max_reports - 1;
+  index = nc_get_index(alr_data->serving_cell);
+  if (index NEQ NOT_PRESENT_16BIT)
+    alr_data->nc_data.cell[index].c_rxlev = NOT_PRESENT_8BIT;
+
+  /*
+   * for all neighbourcells: convert channel number
+   * and fill the primitive to layer 1.
+   */
+  for (index = 0, prim_index = 0; index < c_ba_arfcn; index++)
+  {
+    if (alr_data->nc_data.cell[index].ba_status EQ IN_BA)
+      update->chan_list.radio_freq[prim_index++] =
+        ARFCN_TO_L1(alr_data->nc_data.cell[index].ba_arfcn);
+  }
+
+  /*
+   * set number of channels and band id
+   */
+  update->num_of_chans = (UBYTE)prim_index;
+  alr_data->nc_data.ba_id = ALR_ALLOCATE_NEW_BA ( alr_data->nc_data.ba_id );
+  update->ba_id = alr_data->nc_data.ba_id;
+  update->next_radio_freq_measured = 0;
+
+#if defined(_SIMULATION_)
+  {
+    char buf[80], o;
+    o = sprintf (buf, "RXLEV_PERIODIC: c=%d id=%02x:", update->num_of_chans, update->ba_id);
+    for (index=0; index < update->num_of_chans; index++)
+    {
+      if (o > 80-6)
+      {
+        TRACE_EVENT (buf);
+        o = 0;
+      }
+      o += sprintf (buf+o, "%u,", update->chan_list.radio_freq[index]);
+    }
+    buf[o-1]=0;
+    TRACE_EVENT (buf);
+  }
+#endif  /* _SIMULATION_ */
+
+  SET_STATE (STATE_NC, NC_IDLE);
+/*
+  TRACE_EVENT_P2("glob reps: %d max_report: %d",
+    alr_data->nc_data.c_reports, alr_data->nc_data.max_reports);
+*/
+
+  /*
+   * configure layer 1.
+   */
+  ma_nc_rxlev_periodic_req(update);
+
+  nc_enable_conf();
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_enable_conf             |
++--------------------------------------------------------------------+
+
+  PURPOSE : Maintains what happens after 10 seconds interval.
+            restarts a pending ncell confirmation
+*/
+LOCAL void nc_enable_conf(void)
+{
+  GET_INSTANCE_DATA;
+  UBYTE tim_state = alr_data->nc_data.tim_state;
+  UBYTE st        = GET_STATE(STATE_NC);
+
+  TRACE_EVENT("nc_enable_conf()");
+  alr_data->nc_data.tim_state = NC_CONF_ENABLED;
+  SET_STATE(STATE_NC_PROC, NC_ACQUIRE);
+  switch(tim_state)
+  {
+    case NC_TIM_STOPPED:
+      if (alr_data->nc_data.ppos_req)
+        nc_process_pos_req (alr_data->nc_data.ppos_req);
+      /* Load the 10sec timer counter  variable */
+      nc_start_ncsync();
+      break;
+    case NC_CONF_PENDING:
+      if (alr_data->nc_data.ppos_req)
+        nc_process_pos_req (alr_data->nc_data.ppos_req);
+      else
+        nc_start_ncell_confirm();
+      break;
+    case NC_CONF_DISABLED:
+      if (alr_data->nc_data.ppos_req)
+        nc_process_pos_req (alr_data->nc_data.ppos_req);
+      else if (alr_data->nc_data.c_nc_timer EQ 0)
+        nc_start_ncell_confirm(); /* a confirmation is to restart */
+      break;
+    default:
+      break;
+  }
+  
+
+/*XXX add PBCCH here also */
+#ifdef GPRS
+  if ((st EQ NC_DEDICATED OR st EQ NC_PIM_PBCCH OR st EQ NC_PTM_PBCCH) AND
+#else
+  if ((st EQ NC_DEDICATED) AND
+#endif
+      alr_data->nc_data.c_nc_timer > TEN_SECONDS)
+  {
+    alr_data->nc_data.c_nc_timer = TEN_SECONDS;
+  }
+  else if (alr_data->nc_data.c_nc_timer EQ 0)
+  {
+    if( st EQ NC_DEDICATED OR alr_data->nc_data.eotd_avail
+#ifdef GPRS
+        OR st EQ NC_PIM_PBCCH OR st EQ NC_PTM_PBCCH
+#endif
+      )
+      alr_data->nc_data.c_nc_timer    = TEN_SECONDS;
+    else
+      alr_data->nc_data.c_nc_timer    = THIRTY_SECONDS;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_disable_conf            |
++--------------------------------------------------------------------+
+
+  PURPOSE : Maintains what happens after TIM_NCSYNC expiry.
+            prevents ncell confirmation
+*/
+LOCAL void nc_disable_conf(BOOL bFree)
+{
+  GET_INSTANCE_DATA;
+  TRACE_EVENT("nc_disable_conf()");
+  switch(alr_data->nc_data.tim_state)
+  {
+    case NC_TIM_STOPPED:
+    case NC_CONF_PENDING:
+      TRACE_ERROR("nc_disable_conf() in unexpected state");
+      break;
+    default:
+      break;
+  }
+
+  if(bFree AND (alr_data->nc_data.ppos_ind NEQ NULL))
+  {
+    PFREE(alr_data->nc_data.ppos_ind);
+    alr_data->nc_data.ppos_ind = NULL;
+  }
+
+  if(GET_STATE(STATE_NC_PROC) EQ NC_CONFIRM)
+  {
+    /*
+     * restart confirmation if it was aborted
+     * after the first expiry after the POS_REQ is done.
+     */
+    alr_data->nc_data.c_nc_timer = 0;
+  }
+
+  SET_STATE(STATE_NC_PROC, NC_ACQUIRE);
+  alr_data->nc_data.tim_state = NC_CONF_DISABLED;
+}
+
+LOCAL void nc_start_ncell_confirm(void)
+{
+  GET_INSTANCE_DATA;
+  BOOL acquire = FALSE;
+
+  switch(GET_STATE(STATE_NC))
+  {
+    case NC_DEDICATED:
+    case NC_IDLE:
+#ifdef GPRS
+    case NC_PIM_PBCCH:
+    case NC_PTM_PBCCH:
+#endif
+      if (alr_data->nc_data.eotd_avail AND
+          alr_data->nc_data.c_nc_timer EQ 0)
+      {
+        alr_data->nc_data.c_nc_timer      = TEN_SECONDS;
+
+        nc_stop_all();
+        nc_check_status(CHECK_FOR_CONFIRM);
+        nc_start_eotd_confirm();
+      }
+      else if ((alr_data->nc_data.c_nc_timer EQ 0) OR 
+               (alr_data->nc_data.c_sync_intrupted EQ TRUE) )
+      {
+        /*
+         * confirm ncells every thirty seconds in idle
+         * or every 10 seconds in dedicated
+         */
+        if (GET_STATE(STATE_NC) EQ NC_DEDICATED
+#ifdef GPRS
+            OR GET_STATE(STATE_NC) EQ NC_PIM_PBCCH
+            OR GET_STATE(STATE_NC) EQ NC_PTM_PBCCH
+#endif
+           )
+          alr_data->nc_data.c_nc_timer    = TEN_SECONDS;
+        else
+          alr_data->nc_data.c_nc_timer    = THIRTY_SECONDS;
+        nc_stop_all();
+        nc_check_status(CHECK_FOR_CONFIRM);
+        nc_ncell_list_req();
+        /* if a list_req was send we are in NC_CONFIRM
+           if no list_req was send we are in NC_ACQUIRE
+           This is needed for PBCCH, because there are
+           no measurements in ALR to trigger the initial
+           synchronizations, so we have to check this here
+           if no list_req was send, when a list_req was send
+           then we continue with initial sync after the last
+           sync_ind
+         */
+        if(GET_STATE(STATE_NC_PROC) EQ NC_ACQUIRE)
+          acquire = TRUE;
+
+      }
+      else /* acquire ncells (initial or previous failed ones) or
+            * read bcch
+            */
+      {
+        acquire = TRUE;
+      }
+
+      if(acquire EQ TRUE)
+      {
+        SET_STATE(STATE_NC_PROC, NC_ACQUIRE);
+        nc_check_status(CHECK_FOR_ACQUIRE_AND_BCCH_AND_FAIL);
+        nc_process_status();
+      }
+      break;
+    default:
+      TRACE_ERROR("nc_ncsync_tim_expiry in wrong state");
+      break;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_start_ncsync              |
++--------------------------------------------------------------------+
+  PURPOSE : Assigns/resets c_ncsync_tim counter
+*/
+LOCAL void  nc_start_ncsync (void)
+{
+  GET_INSTANCE_DATA;
+  alr_data->nc_data.c_ncsync_tim = TEN_SECONDS_NCSYNC;
+  TRACE_EVENT("NCSYNC counter loaded with 10 seconds");
+  vsi_t_time(VSI_CALLER &alr_data->nc_data.ncsync_start_tim);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_ncsync_tim_expiry              |
++--------------------------------------------------------------------+
+  PURPOSE : Called at the end of 10 seconds interval for NCELL synchronization
+
+*/
+GLOBAL void nc_ncsync_tim_expiry(void)
+{
+  GET_INSTANCE_DATA;
+  UBYTE i;
+  UBYTE c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+  T_NC* pcell;
+  
+  #ifdef GPRS
+  if(!alr_data->gprs_data.pbcch)
+  #endif
+  {
+    T_TIME tval;
+    vsi_t_time(VSI_CALLER &tval);
+    if(tval<alr_data->nc_data.ncsync_start_tim)
+      TRACE_EVENT_P2("NCSYNC expiry at %d milliseconds, BS_PA_MFRMS = %d",
+        ULONG_MAX-alr_data->nc_data.ncsync_start_tim+tval,
+        alr_data->bs_pa_mfrms+2);
+    else
+      TRACE_EVENT_P2("NCSYNC expiry at %d milliseconds, BS_PA_MFRMS = %d",
+        tval-alr_data->nc_data.ncsync_start_tim,
+        alr_data->bs_pa_mfrms+2);
+  }
+
+  
+  
+  if (alr_data->nc_data.tim_state NEQ NC_TIM_STOPPED)
+  {
+    #ifdef GPRS
+    if(!alr_data->gprs_data.pbcch)
+    #endif
+    {
+      nc_start_ncsync();
+    }
+
+    if (alr_data->nc_data.c_nc_timer > 0)
+      alr_data->nc_data.c_nc_timer--;
+    TRACE_EVENT_P1("c_nc_timer %d", alr_data->nc_data.c_nc_timer);
+
+    /* decrement counters */
+    for (i=0,pcell = &alr_data->nc_data.cell[0]; i < c_ba_arfcn; i++,pcell++)
+    {
+      if (pcell->c_sync > 0 AND pcell->c_sync < C_INVALID_SYNC)
+          pcell->c_sync--;
+      if (pcell->c_bcch > 0 AND pcell->c_bcch < C_INVALID_BCCH)
+        pcell->c_bcch--;
+
+      if(pcell->ba_arfcn NEQ alr_data->serving_cell)
+      {
+        switch(pcell->ba_status)
+        {
+          case NOT_IN_BA_SHORT:
+            pcell->ba_status = NOT_IN_BA_LONG;
+#if defined(TRACING)
+            TRACE_EVENT_P2 ("NC%u[%u] -> NOT_IN_BA_LONG", i, pcell->ba_arfcn);
+#endif  /* TRACING */
+            break;
+          case NOT_IN_BA_LONG:
+#if defined(TRACING)
+            TRACE_EVENT_P2 ("NC%u[%u] remove", i, pcell->ba_arfcn);
+            /* this trace must be performed before the removal to get right results */
+#endif  /* TRACING */
+            c_ba_arfcn = nc_remove_channel_from_ba_list (i);
+            i--;
+            pcell--;
+            ALR_TRACE_ALL_NC ();
+            break;
+          case IN_BA:
+            /* do nothing */
+            break;
+        }
+      }
+    }
+  }
+
+  switch(alr_data->nc_data.tim_state)
+  {
+    case NC_CONF_ENABLED:
+      nc_start_ncell_confirm();
+      break;
+    case NC_CONF_DISABLED:
+      alr_data->nc_data.tim_state = NC_CONF_PENDING;
+      break;
+    case NC_CONF_PENDING:
+      TRACE_ERROR("TIM_NCSYNC expiry in unexpected state");
+      /*
+       * this should never happen, but in case ALR is waiting
+       * more than 20 seconds for the last MPHC_NCELL_SYNC_IND of the
+       * confirmation procedure and the reason isn't a position request,
+       * then the confirmation procedure is restarted
+       */
+      if (GET_STATE(STATE_NC_PROC) EQ NC_CONFIRM AND
+        alr_data->nc_data.ppos_req EQ NULL)
+      {
+        alr_data->nc_data.c_nc_timer = 0;
+        nc_start_ncell_confirm();
+      }
+      break;
+  }
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_init_pos_ind            |
++--------------------------------------------------------------------+
+
+  PURPOSE : initial setting of a MPH_NCELL_POS_IND
+
+*/
+
+LOCAL void nc_init_pos_ind (USHORT req_id)
+{
+  GET_INSTANCE_DATA;
+  memset(&(alr_data->nc_data.ppos_ind->eotd_sc_res),  0, sizeof (T_eotd_sc_res ));
+  memset(&(alr_data->nc_data.ppos_ind->eotd_sc_res1), 0, sizeof (T_eotd_sc_res1));
+  alr_data->nc_data.ppos_ind->c_eotd_nc_res = 0;
+  alr_data->nc_data.ppos_ind->req_id = req_id;
+  alr_data->nc_data.ppos_ind->eotd_res = 0;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_is_sync                 |
++--------------------------------------------------------------------+
+
+  PURPOSE : checks whether a ncell is synchronized and timing values
+            are valid
+
+*/
+LOCAL BOOL nc_is_sync (T_NC * p_ncell)
+{
+  switch (p_ncell->status)
+  {
+    case FB_SB_SYNC:
+    case READ_SB:
+    case READ_SB_BCCH:
+    case READ_BCCH:
+    case READ_BCCH_RR_NOT_INFORMED:
+    case IDLE_SYNC:
+      return TRUE;
+    default:
+      return FALSE;
+  }
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_ncell_pos_req           |
++--------------------------------------------------------------------+
+
+  PURPOSE : reception of a ncell_pos_req
+
+*/
+
+void nc_ncell_pos_req (T_MPH_NCELL_POS_REQ* pos_req)
+{
+  GET_INSTANCE_DATA;
+  /* if there is an earlier position request disgard it*/
+  if (alr_data->nc_data.ppos_req NEQ NULL)
+    PFREE(alr_data->nc_data.ppos_req);
+  /* store the request until the end of the respective position indication */
+  alr_data->nc_data.ppos_req = pos_req;
+
+  /*
+   * process the request immediately if confirmation is enabled or
+   * another measurement is in progress
+   * (otherwise start processing when confirmation becomes enabled
+   */
+  if ( (alr_data->nc_data.tim_state EQ NC_CONF_ENABLED) OR
+       (alr_data->nc_data.tim_state EQ NC_CONF_DISABLED AND
+        GET_STATE(STATE_NC_PROC) EQ NC_CONFIRM) )
+    nc_process_pos_req(pos_req);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_process_pos_req         |
++--------------------------------------------------------------------+
+
+  PURPOSE : processes a ncell_pos_req
+
+*/
+
+LOCAL void nc_process_pos_req (T_MPH_NCELL_POS_REQ* pos_req)
+{
+  GET_INSTANCE_DATA;
+  UBYTE fail=1;
+
+  if (alr_data->nc_data.ppos_ind EQ NULL)
+  {
+    PALLOC (pos_ind, MPH_NCELL_POS_IND);
+    alr_data->nc_data.ppos_ind = pos_ind;
+  }
+
+  nc_init_pos_ind(pos_req->req_id);
+
+#if 0 /* allow position requests also in NC_IDLE mode to be able to answer a test SMS */
+  switch(GET_STATE(STATE_NC))
+  {
+    case NC_DEDICATED:
+#endif /* 0|1 */
+      if(alr_data->nc_data.eotd_avail)
+      {
+        T_NC*          p_ncell;
+        T_ncell_eotd*  p_ncell_pos = &pos_req->ncell_eotd[0];
+        T_NC*          list_of_asd_1o12 [12];
+        T_ncell_eotd*  list_of_asd_ba   [15];
+        T_ncell_eotd*  list_of_asd      [15];
+        T_NC**         p_asd_1o12 = &list_of_asd_1o12[0];
+        T_ncell_eotd** p_asd_ba   = &list_of_asd_ba[0];
+        T_ncell_eotd** p_asd      = &list_of_asd[0];
+        UBYTE          c_ba = alr_data->nc_data.c_ba_arfcn;
+        UBYTE          i,j;
+        UBYTE          c_list;
+        UBYTE          found;
+
+        fail=0;
+
+        nc_stop_all();
+
+        /*
+         * generate and send an appropriate MPHC_NCELL_LIST_SYNC_REQ
+         * 1/ take all ncells which are in ASD list and the twelve
+         *    strongest synchronized of the BA list (using timing values
+         *    from former synchronisation)
+         * 2/ then all ncells which are in ASD list and in the BA list
+         *    (using timings from the ASD list)
+         * 3/ then rest of ASD cells (using timings from the ASD list)
+         * 4/ then rest of BA list cells which are synchronized (using
+         *    timing values from former synchronisation)
+         */
+        {
+          PALLOC (ncell_list_req, MPHC_NCELL_LIST_SYNC_REQ);
+          ncell_list_req->eotd = TRUE;
+
+          /* for all ncells in ASD list */
+          for(j=0; j < MAX_NCELL_EOTD_L1 AND j < pos_req->c_ncell_eotd;
+              j++, p_ncell_pos++)
+          {
+            if (p_ncell_pos->arfcn EQ alr_data->serving_cell)
+            {
+              continue;
+            }
+            /* look if it is in BA list */
+            found=FALSE;
+            for (i = 0, p_ncell = &alr_data->nc_data.cell[0]; i < c_ba; i++, p_ncell++)
+            {
+              if(p_ncell_pos->arfcn EQ p_ncell->ba_arfcn)
+              {
+               /*
+                * if it is in both list then check
+                * if it is synchronized or not
+                * and use the correct list
+                */
+                if(nc_is_sync(p_ncell))
+                { /* case 1/ */
+                  *(p_asd_1o12++) = p_ncell;
+                  found=TRUE;
+                }
+                else
+                { /* case 2/ */
+                  *(p_asd_ba++) = p_ncell_pos;
+                  found=TRUE;
+                } /* is sync */
+                break;
+              } /*arfcn*/
+            } /*ba list*/
+
+            /* if nothing was found, then it is case 3/ */
+            if(!found)
+              *(p_asd++) = p_ncell_pos;
+
+          } /* asd list */
+
+          c_list=0;
+          for(i=0; c_list < MAX_L1_SYNC_CNT AND i < p_asd_1o12-list_of_asd_1o12;i++)
+          {
+            nc_ncell_list_req_pos(&ncell_list_req->ncell_list[c_list++],
+                                  NULL,
+                                  list_of_asd_1o12[i]->ba_arfcn);
+          } /*asd_1o12 */
+          for(i=0 ;c_list < MAX_L1_SYNC_CNT AND i < p_asd_ba-list_of_asd_ba;i++)
+          {
+            nc_ncell_list_req_pos(&ncell_list_req->ncell_list[c_list++],
+                                  list_of_asd_ba[i],
+                                  list_of_asd_ba[i]->arfcn);
+
+          }
+          for(i=0 ;c_list < MAX_L1_SYNC_CNT AND i < p_asd-list_of_asd;i++)
+          {
+            nc_ncell_list_req_pos(&ncell_list_req->ncell_list[c_list++],
+                                  list_of_asd[i],
+                                  list_of_asd[i]->arfcn);
+          }
+          /*
+           * fill the ncell list req with the remaining synchronized
+           * neigbour cells of the BA list (case 4/ )
+           */
+          for (i=0, p_ncell = &alr_data->nc_data.cell[0];
+               c_list < MAX_L1_SYNC_CNT AND i < c_ba;
+               i++, p_ncell++)
+          {
+            if (p_ncell->ba_arfcn EQ alr_data->serving_cell)
+            {
+              continue;
+            }
+            if (nc_is_sync(p_ncell))
+            {
+              USHORT l1_arfcn = ARFCN_TO_L1(p_ncell->ba_arfcn);
+              found=FALSE;
+              for (j=0; j < c_list;j++)
+              {
+                if (ncell_list_req->ncell_list[j].radio_freq EQ l1_arfcn)
+                {
+                  found = TRUE;
+                  break;
+                }
+              } /* MPHC_NCELL_LIST_SYNC_REQ */
+              if (!found)
+                nc_ncell_list_req_pos(&ncell_list_req->ncell_list[c_list++],
+                                      NULL,
+                                      p_ncell->ba_arfcn);
+            } /* is sync */
+          } /* BA list */
+
+          if (c_list > 0)
+          {
+            ncell_list_req->list_size     = c_list;
+            alr_data->nc_data.c_sync_req  = c_list;
+            if (c_list < MAX_NCELL_EOTD_L1)
+              memset(&(ncell_list_req->ncell_list[c_list]),
+                     0,
+                     (MAX_NCELL_EOTD_L1 - c_list) * sizeof(T_ncell_list));
+
+            alr_data->nc_data.c_sync_req += 2; /* for the 2 scell ind's */
+            nc_disable_conf(DONT_FREE_POS_IND);
+            SET_STATE(STATE_NC_PROC, NC_CONFIRM);
+            ma_nc_list_sync_req (ncell_list_req);
+            TRACE_EVENT_P1("MPHC_NCELL_LIST_SYNC_REQ eotd=TRUE c_sync_req=%u", alr_data->nc_data.c_sync_req);
+          }
+          else
+            fail = TRUE;
+        }/* PALLOC list_req */
+      } /* eotd_avail */
+      /* else fail=1*/
+#if 0
+      break;
+    default:
+      /*fail=1*/
+      break;
+  } /*switch NC_STATE*/
+#endif /* 0|1 */
+
+  if(fail)
+  { /* TODO complete ?? */
+    alr_data->nc_data.ppos_ind->eotd_res = EOTD_REF;
+    PSENDX(RR, alr_data->nc_data.ppos_ind);
+    alr_data->nc_data.ppos_ind = NULL;
+    PFREE(pos_req);
+    alr_data->nc_data.ppos_req = NULL;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_ncell_list_req_pos      |
++--------------------------------------------------------------------+
+
+  PURPOSE : Handles cell lists.
+
+*/
+
+LOCAL void nc_ncell_list_req_pos(T_ncell_list* p_ncell_list,
+                                 T_ncell_eotd* asd_cell,
+                                 USHORT arfcn)
+{
+  GET_INSTANCE_DATA;
+  USHORT index = nc_get_index(arfcn);
+
+  p_ncell_list->radio_freq       = ARFCN_TO_L1(arfcn);
+
+  if(asd_cell)
+  {
+    if(index NEQ NOT_PRESENT_16BIT AND index NEQ LAST_BSIC_REQ AND
+       alr_data->nc_data.cell[index].status EQ IDLE_SYNC)
+    {
+      p_ncell_list->fn_offset       = alr_data->nc_data.cell[index].frame_offset;
+      p_ncell_list->time_alignment  = alr_data->nc_data.cell[index].time_align;
+      p_ncell_list->timing_validity = TV_VALID_TIMING_INFO;
+      /*TODO what about reception of ncell_sync_ind for this cell
+        are timing info  and counter updated ?*/
+    }
+    else
+    {
+      nc_get_timing_eotd(p_ncell_list, asd_cell);
+      p_ncell_list->timing_validity  = TV_VALID_TIMING_INFO; /* TV_APPROX_TIMING_INFO;*/
+    }
+  } /*asd_cell*/
+  else
+  {
+    if(index NEQ NOT_PRESENT_16BIT AND index NEQ LAST_BSIC_REQ)
+    {
+      /* cell is in BA list and 1o12, so use the data we have */
+      switch(alr_data->nc_data.cell[index].status)
+      {
+        case READ_SB_BCCH:
+        case READ_BCCH:
+          nc_set_status(index,READ_SB_BCCH_PENDING);
+          break;
+        case READ_SB:
+        case FB_SB_SYNC:
+          nc_set_status(index,READ_SB_PENDING);
+          break;
+        case READ_FB_SB:
+        case READ_BCCH_RR_NOT_INFORMED:
+        case FB_SB_SYNC_RR_NOT_INFORMED:
+          /*TODO what about reception of ncell_sync_ind for this cell
+            are timing info  and counter updated ?*/
+        break;
+      } /*status*/
+      p_ncell_list->fn_offset       = alr_data->nc_data.cell[index].frame_offset;
+      p_ncell_list->time_alignment  = alr_data->nc_data.cell[index].time_align;
+      p_ncell_list->timing_validity = TV_VALID_TIMING_INFO;
+    }
+    else
+    {
+      TRACE_ERROR("nc_ncell_list_req_pos: asd_cell==0 but cell not in BA");
+    }
+  }/*asd_cell*/
+}
+
+LOCAL void nc_get_timing_eotd(T_ncell_list* p_ncell_list,
+                              T_ncell_eotd* asd_cell)
+{
+  USHORT td, adjust = 0, offs;
+  /*
+   * The values mfrm_offset, rough_rtd and exp_otd are differences
+   * between the BTS in question and the reference BTS.
+   * L1 expects the differences between serving BTS and BTS in question:
+   *
+   *                   +----+----+----+----+----+....+----+----+----+----+----+ serving BTS
+   *                   0                                                      51
+   *                   |
+   *             0 Net | L1 1250 (5000)
+   *             +---->V<----+
+   *              \         /
+   *               \      /
+   * +----+----+----+----+----+....+----+----+----+----+----+  BTS in question
+   * 0                                                      51
+   * +-----Net----->|    |<---------L1----------------------+
+   *
+   * time differences are indicated in bits by the net, but expected
+   * in quarterbits by L1
+   */
+
+  offs = asd_cell->mfrm_offset;
+
+  if (asd_cell->otd_type EQ BOTH_OTD)
+  {
+    int diff = asd_cell->rough_rtd - asd_cell->exp_otd;
+    if (diff >= 850)
+      adjust = 1;
+    else if (diff <= -850)
+      adjust = (USHORT)-1;  /* adjust is USHORT type so typecasting -1 with USHORT  */
+    /*
+     * GSM 04.31 section A.2.2.3 version 8.7.0 says that adjust shall be
+     * equal 0 for -400 <= diff <= 400 and states an error for
+     * -850 < diff < -450 and for 450 < diff < 850, but doesn't
+     * describe the behaviour in this cases.
+     * All this valid and invalid cases are implemented here by
+     * adjust = 0
+     */
+  }
+
+  if (asd_cell->otd_type EQ ROUGH_OTD)
+    td = asd_cell->rough_rtd;
+  else
+  { /*
+     * uncertainty indicates how many bits the search window
+     * for measurement should be opended earlier than the expected
+     * value. Because of the subsequent subtraction we have to ADD
+     * the uncertainty value.
+     * no special handling for uncertainty value 7 (uncertainty > 30 bits)
+     * is implemented yet
+     */
+    td = asd_cell->exp_otd + unc_values[asd_cell->uncertainty];
+    if (td >= 1250)
+      offs++;
+  }
+  td %= 1250;
+
+  if (td)
+  {
+    p_ncell_list->time_alignment = 5000 - 4 * td;
+    offs++;
+  }
+  else
+    p_ncell_list->time_alignment = 0;
+
+  offs = (offs + adjust) % 51;
+
+  if (offs)
+    p_ncell_list->fn_offset = 51 - offs;
+  else
+    p_ncell_list->fn_offset = 0;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_start_eotd_confirm      |
++--------------------------------------------------------------------+
+
+  PURPOSE : generates an MPHC_NCELL_LIST_SYNC_REQ from the BA list.
+*/
+LOCAL void nc_start_eotd_confirm(void)
+{
+  GET_INSTANCE_DATA;
+  /*
+   * this check is needed for the resume
+   * in the GPRS case because we need
+   * to keep the states over a
+   * start transition
+   */
+  if(alr_data->nc_data.ppos_ind EQ NULL)
+  {
+    PALLOC (pos_ind, MPH_NCELL_POS_IND);
+    alr_data->nc_data.ppos_ind = pos_ind;
+  }
+  nc_init_pos_ind (NOT_PRESENT_16BIT);
+
+  /* generate and send an appropriate MPHC_NCELL_LIST_SYNC_REQ */
+  nc_ncell_list_req();
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_ncell_list_req          |
++--------------------------------------------------------------------+
+
+  PURPOSE : generates an MPHC_NCELL_LIST_SYNC_REQ based on the 12
+            strongest neighbour cells of the BA
+
+*/
+LOCAL void nc_ncell_list_req (void)
+{
+  GET_INSTANCE_DATA;
+  UBYTE c_found = 0, found, i, validity;
+  USHORT c_ba = alr_data->nc_data.c_ba_arfcn;
+  T_NC*   pcell;
+  T_ncell_list *pnc;
+  PALLOC (ncell_list_req, MPHC_NCELL_LIST_SYNC_REQ);
+
+  if (alr_data->nc_data.c_sync_req NEQ 0)
+    TRACE_EVENT_P1("nc_ncell_list_req with c_sync_req=%u before", alr_data->nc_data.c_sync_req);
+
+  ncell_list_req->eotd = alr_data->nc_data.eotd_avail;
+
+  nc_stop_all();
+  for (i = 0, pcell = &alr_data->nc_data.cell[0]; i < c_ba; i++, pcell++)
+  {
+    if (alr_data->nc_data.eotd_avail AND pcell->ba_arfcn EQ alr_data->serving_cell)
+    {
+      continue;
+    }
+    if (pcell->one_of_twelve)
+    {
+      switch (pcell->status)
+      {
+        case READ_SB:
+          nc_set_status(nc_get_index(pcell->ba_arfcn), READ_SB_PENDING);
+          found         = TRUE;
+          validity      = TV_VALID_TIMING_INFO;
+          break;
+        case READ_SB_BCCH:
+          nc_set_status(nc_get_index(pcell->ba_arfcn), READ_SB_BCCH_PENDING);
+          found         = TRUE;
+          validity      = TV_VALID_TIMING_INFO;
+          break;
+          /* TODO(opt): if !eotd_avail maybe optimize later
+        case READ_FB_SB:
+        break*/
+          /*
+        case READ_BCCH_RR_NOT_INFORMED:
+        case READ_BCCH_PENDING_RR_NOT_INFORMED:
+        case READ_BCCH:
+        case READ_BCCH_PENDING:
+          found         = TRUE;
+          validity      = TV_VALID_TIMING_INFO;
+          break;*/
+        default:
+          found = FALSE;
+          validity      = TV_INVALID_TIMING_INFO;
+          break;
+      }
+
+      if (found)
+      {
+        pnc = &(ncell_list_req->ncell_list[c_found++]);
+        pnc->radio_freq      = ARFCN_TO_L1(pcell->ba_arfcn);
+        if (validity EQ TV_VALID_TIMING_INFO)
+        {
+          pnc->fn_offset       = pcell->frame_offset;
+          pnc->time_alignment  = pcell->time_align;
+        }
+        else
+        {
+          pnc->fn_offset       = 0;
+          pnc->time_alignment  = 0;
+        }
+        pnc->timing_validity = validity;
+      }
+    }
+  }
+
+  /*
+   * in case there are no synchronized neighbour cells
+   * send an empty MPHC_NCELL_LIST_SYNC_REQ to L1
+   * (to serve the cursor task later with a position indication
+   * containing measurements of the serving cell only)
+   */
+  if(c_found OR alr_data->nc_data.eotd_avail)
+  {
+    ncell_list_req->list_size = c_found;
+    alr_data->nc_data.c_sync_req = c_found;
+    if (c_found < MAX_NCELL_EOTD_L1)
+      memset(&(ncell_list_req->ncell_list[c_found]),
+             0,
+             (MAX_NCELL_EOTD_L1 - c_found) * sizeof(T_ncell_list));
+
+    if(alr_data->nc_data.eotd_avail)
+      /* add the 2 scell sync_ind */
+      alr_data->nc_data.c_sync_req += 2;
+
+    nc_disable_conf(DONT_FREE_POS_IND);
+    SET_STATE(STATE_NC_PROC, NC_CONFIRM);
+    ma_nc_list_sync_req (ncell_list_req);
+    TRACE_EVENT_P3("MPHC_NCELL_LIST_SYNC_REQ eotd=%d c_sync_req=%u SC=%u",
+                    alr_data->nc_data.eotd_avail,
+                    alr_data->nc_data.c_sync_req,
+                    alr_data->serving_cell);
+  }
+  else
+  {
+    PFREE(ncell_list_req);
+    SET_STATE(STATE_NC_PROC, NC_ACQUIRE);
+    nc_enable_conf();
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_store_eotd              |
++--------------------------------------------------------------------+
+
+  PURPOSE : copies the measurement results into the MPH_NCELL_POS_IND
+
+*/
+LOCAL void nc_store_eotd (T_eotd_sc_res         * p_res,
+                          T_MPHC_NCELL_SYNC_IND * sync_ind,
+                          USHORT                  arfcn)
+{
+  p_res->sb_flag    = sync_ind->sb_flag;
+  p_res->bsic       = sync_ind->bsic;
+  p_res->arfcn      = arfcn;
+  memcpy(&(p_res->eotd_crosscor),
+         &(sync_ind->a_eotd_crosscor),
+         sizeof(sync_ind->a_eotd_crosscor));
+  p_res->d_eotd_nrj = sync_ind->d_eotd_nrj;
+  p_res->time_tag   = sync_ind->time_tag;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_stop_ext_meas_ind       |
++--------------------------------------------------------------------+
+
+  PURPOSE : Notify RR about the end of the end of the Extended
+            Measurement procedure.
+
+*/
+GLOBAL void nc_stop_ext_meas_ind (void)
+{
+  GET_INSTANCE_DATA;
+  PALLOC ( mph_sync_ind, MPH_SYNC_IND );
+  mph_sync_ind->cs    = CS_STOP_PLMN_SEARCH;
+  mph_sync_ind->arfcn = NOT_PRESENT_16BIT;
+  PSENDX ( RR, mph_sync_ind );
+
+  if( alr_data->cs_data.p_power_cnf NEQ NULL )
+  {
+    PFREE(alr_data->cs_data.p_power_cnf)
+    alr_data->cs_data.p_power_cnf = NULL;
+  }
+  if( IS_EXT_MEAS_RUNNING )/*alr_data->cs_data.mph_ext_meas_req NEQ NULL */
+  {
+    PFREE ( alr_data->cs_data.mph_ext_meas_req );
+    alr_data->cs_data.mph_ext_meas_req = NULL;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_stop_rr_activity        |
++--------------------------------------------------------------------+
+
+  PURPOSE : Stop BCCH reading or PLMN seach originated by RR.
+
+*/
+GLOBAL void nc_stop_rr_activity (UBYTE stop)
+{
+  GET_INSTANCE_DATA;
+  /*
+   * RR signals stop BCCH reading or stop PLMN search
+   */
+  if( (IS_EXT_MEAS_RUNNING) AND
+       (alr_data->nc_data.cell[LAST_BSIC_REQ].status EQ READ_FB_SB_PENDING) )
+  {
+        /*
+         * Wait for MPHC_NCELL_SYNC_IND  or MPHC_STOP_NCELL_SYNC_CON
+         */
+        alr_data->cs_data.ext_meas_state_pend = CS_ACTIVE_SYNC;
+  }
+  nc_clear_last_bsic();
+
+  /*
+   * RR signals end of PLMN search
+   */
+  if (stop)
+  {
+    alr_data->plmn_search_running = FALSE;
+#ifdef TI_PS_FF_QUAD_BAND_SUPPORT
+    alr_multiband_std = NOT_PRESENT_8BIT;
+#endif
+    nc_enable_conf();
+  }
+
+  if ( IS_EXT_MEAS_RUNNING AND (alr_data->cs_data.ext_meas_state_pend EQ CS_NULL) )
+  {
+      nc_stop_ext_meas_ind();
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (8403)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_bsic_req                |
++--------------------------------------------------------------------+
+
+  PURPOSE : Request of RR to search for frequency correction
+            burst and synchron burst.
+
+*/
+
+GLOBAL void nc_bsic_req (T_MPH_BSIC_REQ *mph_bsic_req)
+{
+  GET_INSTANCE_DATA;
+  USHORT i;
+
+  nc_clear_last_bsic();
+
+#ifdef TI_PS_FF_QUAD_BAND_SUPPORT
+  if (alr_data->plmn_search_running)
+  {
+    if (nc_compare_bsic_std (STD_GET_FROM_ARFCN (mph_bsic_req->arfcn)))
+    {
+      alr_multiband_std = STD_GET_FROM_ARFCN (mph_bsic_req->arfcn);
+      TRACE_EVENT_P2 ("Received BSIC req for different std %d, %d", std, alr_multiband_std);
+    }
+  }
+#endif
+
+  mph_bsic_req->arfcn &= ARFCN_MASK;
+  ALR_TRACE_NC_BSIC_REQ (mph_bsic_req->arfcn);
+
+  ALR_EM_NEIGHBOURCELL_BSIC_REQUEST;
+
+
+  /*
+   * look if the requested channel number is also in the normal
+   * BA list to stop it.
+   */
+  i = nc_get_index( mph_bsic_req->arfcn );
+
+  switch(i)
+  {
+    case NOT_PRESENT_16BIT:
+    case LAST_BSIC_REQ:
+      break;
+    default:
+      nc_stop_if_active(i);
+      TRACE_ERROR("bsic_req for arfcn which is in BA list");
+      break;
+  }
+
+
+  /*
+   * fill in parameters for BSIC request
+   */
+  nc_set_status (LAST_BSIC_REQ, READ_FB_SB);
+  alr_data->nc_data.cell[LAST_BSIC_REQ].ba_arfcn = mph_bsic_req->arfcn;
+
+  /*
+   * forward synchronisation request to layer 1, if not full
+   */
+  if (alr_data->nc_data.c_sync_req < MAX_L1_SYNC_CNT)
+  {
+    /*
+     * reset if we are in NC_CON_EST
+     */
+
+    if(GET_STATE(STATE_NC) EQ NC_CON_EST
+#ifdef GPRS
+       AND !alr_data->gprs_data.pbcch
+#endif
+      )
+    {
+      SET_STATE(STATE_NC, NC_IDLE);
+    }
+#ifdef GPRS
+    else if(GET_STATE(STATE_NC) EQ NC_CON_EST AND
+             alr_data->gprs_data.pbcch) /* AND */
+/* add later          alr_data->gprs_data.pim) */
+    {
+      SET_STATE(STATE_NC, NC_PIM_PBCCH);
+    }
+#endif
+
+    nc_process_status ();
+  }
+
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : alr_nc                     |
+| STATE   : code                ROUTINE : nc_bcch_ind                |
++--------------------------------------------------------------------+
+
+  PURPOSE : Reception of a system information message for a neighbourcell.
+
+*/
+
+GLOBAL void nc_bcch_ind (T_MPHC_NCELL_BCCH_IND *data_ind)
+{
+  GET_INSTANCE_DATA;
+  USHORT index;
+  UBYTE  msg_t            = data_ind->l2_frame.content[SI_CONTENTS_MSG_T];
+
+  if (alr_data->nc_data.cell[LAST_BSIC_REQ].status EQ READ_BCCH_PENDING AND
+      alr_data->nc_data.cell[LAST_BSIC_REQ].ba_arfcn EQ ARFCN_TO_G23(data_ind->radio_freq))
+  {
+    /*
+     * Cell selection or PLMN available search triggered by RR.
+     */
+    if (data_ind->error_flag NEQ VALID_BLOCK)
+    {
+      /*
+       * Reception of an invalid block
+       */
+      ALR_TRACE_NC ("invalid PLMN BCCH");
+
+      /*
+       * indicate BCCH read error to RR, too many errors are controlled by RR
+       */
+      ma_error_ind (CS_BCCH_READ_ERROR, ARFCN_TO_G23(data_ind->radio_freq));
+    }
+    else
+    {
+      UBYTE mt = data_ind->l2_frame.content[2];
+
+      ALR_TRACE_NC ("valid PLMN BCCH");
+
+      /*
+       * forward message to RR
+       */
+      ma_send_unitdata ((T_MPHC_DATA_IND *)data_ind);
+
+      switch (mt)
+      {
+        case D_SYS_INFO_3:
+        case D_SYS_INFO_4:
+          alr_data->nc_data.cell[LAST_BSIC_REQ].blocks_required = 0;
+          break;
+
+        default:
+          /*
+           * Reception of any other message. Shall not happen after
+           * GSM 5.02 chapter 6.3.1.3 Mapping of BCCH data, but
+           * is possible for future extensions.
+           * Read this tc again plus all which are not read until now.
+           */
+          break;
+      }
+    }
+
+    /*
+     * all frames received, then decrement pending BCCH request
+     */
+    if (alr_data->nc_data.cell[LAST_BSIC_REQ].blocks_required EQ 0)
+    {
+
+      nc_set_status (LAST_BSIC_REQ, IDLE);
+      alr_data->nc_data.cell[LAST_BSIC_REQ].ba_arfcn = NOT_PRESENT_16BIT;
+
+      /*
+       * L3 may avoid sending a stop message to terminate a NCELL_BCCH process
+       * if there no more pending request in L1
+       */
+      if (alr_data->nc_data.c_bcch_req > 0)
+      {
+        /*
+         * stop any ongoing request in layer 1
+         */
+        ma_nc_stop_ncell_bcch_req(ARFCN_TO_G23(data_ind->radio_freq));
+
+        /*
+         * decrement the number of pending requests in layer 1.
+         */
+        alr_data->nc_data.c_bcch_req--;
+      }
+    }
+    else
+    {
+      /*
+       * stop pending request and start again.
+       */
+      nc_restart_bcch (LAST_BSIC_REQ);
+    }
+    return ;
+  }
+
+  /*
+   * Normal Ncell Handling, get position in neighbourcell list
+   */
+  index = nc_get_index (ARFCN_TO_G23(data_ind->radio_freq));
+
+  if (index NEQ NOT_PRESENT_16BIT AND
+      index NEQ LAST_BSIC_REQ     AND
+      (alr_data->nc_data.cell[index].status EQ READ_BCCH_PENDING OR
+       alr_data->nc_data.cell[index].status EQ READ_BCCH_PENDING_RR_NOT_INFORMED))
+  {
+    /*
+     * normal member of the neighbourcell list and an answer is expected.
+     */
+    if (data_ind->error_flag EQ VALID_BLOCK)
+    {
+      switch (msg_t)
+      {
+        case D_SYS_INFO_3:
+          /*
+           * Sys Info 3 contains the needed information in any case
+           */
+#if defined(TRACING)
+          TRACE_EVENT_P3("NC%u[%d] BCCH ok %s",
+            index,
+            alr_data->nc_data.cell[index].ba_arfcn EQ NOT_PRESENT_16BIT ?
+              -1 : alr_data->nc_data.cell[index].ba_arfcn&ARFCN_MASK, "si3");
+#endif  /* TRACING */
+          if (alr_data->nc_data.cell[index].status EQ READ_BCCH_PENDING_RR_NOT_INFORMED)
+          {
+            /*
+             * store data if RR is not informed yet about
+             * synchronisation
+             */
+            /*lint !e419 (Warning -- Apparent data overrun)*/
+            nc_store_bcch((T_MPHC_DATA_IND *) data_ind, index,0);
+            nc_set_status (index, FB_SB_SYNC_RR_NOT_INFORMED);
+          }
+          else
+          {
+            /*
+             * forward information to RR
+             */
+            ma_send_unitdata ((T_MPHC_DATA_IND *)data_ind);
+            nc_set_fb_sb_sync_initial (index);
+
+          }
+          break;
+
+        case D_SYS_INFO_4:
+          if ((data_ind->l2_frame.content[SI_CONTENTS_CS2] & ONLY_ACS) EQ 0)
+          {
+            nc_set_si4_si78 (index, data_ind, 0);
+          }
+          else
+          {
+#if defined(TRACING)
+          TRACE_EVENT_P3("NC%u[%d] BCCH ok %s",
+            index,
+            alr_data->nc_data.cell[index].ba_arfcn EQ NOT_PRESENT_16BIT ?
+              -1 : alr_data->nc_data.cell[index].ba_arfcn&ARFCN_MASK, "si4_n78");
+#endif  /* TRACING */
+            /*
+             * additional information from system info 7 or 8
+             * is needed for cell reselection purposes
+             */
+            if(alr_data->nc_data.cell[index].status EQ READ_BCCH_PENDING_RR_NOT_INFORMED)
+            {
+              /*
+               * store data if RR is not informed yet about synchronisation
+               */
+              nc_store_bcch((T_MPHC_DATA_IND *) data_ind, index,0);
+            }
+            else
+            {
+              /*
+               * forward information to RR
+               */
+              ma_send_unitdata ((T_MPHC_DATA_IND *)data_ind);
+            }
+
+            /*
+             * system info 3, 7 or 8 required
+             * -> tc = 2,6 for normal BCCH or 3,7 for extended BCCH
+             */
+            alr_data->nc_data.cell[index].blocks_required = NCELL_BCCH_SI_3_7_8;
+          }
+          break;
+
+        case D_SYS_INFO_7:
+        case D_SYS_INFO_8:
+          if (nc_sys_info_78_required (index))
+          {
+            nc_set_si4_si78(index, data_ind, 1);
+          }
+          else
+            /*
+             * increment error counter and request tc again.
+             */
+            alr_data->nc_data.cell[index].c_error++;
+
+          break;
+
+        default:
+          /*
+           * increment error counter and request tc again.
+           */
+          alr_data->nc_data.cell[index].c_error++;
+          break;
+      }
+    }
+    else
+    {
+      /*
+       * BCCH reading failed
+       *
+       * error counter is incremented and tc shall be read again.
+       */
+      alr_data->nc_data.cell[index].c_error++;
+    }
+
+    /*
+     * restart next attempt
+     */
+    if (alr_data->nc_data.cell[index].blocks_required EQ 0)
+    {
+      if (alr_data->nc_data.c_bcch_req > 0)
+      {
+        /*
+         * decrement number of pending BCCH requests in layer 1.
+         */
+          alr_data->nc_data.c_bcch_req--;
+
+        /*
+         * Stop the pending reading, if not all tc-s read
+         */
+        ma_nc_stop_ncell_bcch_req (alr_data->nc_data.cell[index].ba_arfcn);
+      }
+      alr_data->nc_data.cell[index].c_attempt = 0;
+
+      /*
+       * start next request to layer 1 if necessary
+       */
+      nc_process_status ();
+    }
+    else
+    {
+      if (alr_data->nc_data.cell[index].c_error >= 4)
+      {
+        /*
+         * set status to failed or excluded depending on the failed
+         * attempt counter and/or restart for this channel.
+         */
+        nc_sync_failed_attempt (index);
+
+        /*
+         * L3 may avoid sending a stop message to terminate a NCELL_BCCH process
+         * if there no more pending request in L1
+         */
+        if (alr_data->nc_data.c_bcch_req > 0)
+        {
+          /*
+           * decrement number of pending BCCH requests in layer 1.
+           */
+            alr_data->nc_data.c_bcch_req--;
+
+          /*
+           * Stop the pending reading, if not all tc-s read
+           */
+          ma_nc_stop_ncell_bcch_req (alr_data->nc_data.cell[index].ba_arfcn);
+        }
+
+        /*
+         * start next request to layer 1 if necessary
+         */
+        nc_process_status ();
+      }
+      else
+      {
+        /*
+         * restart the BCCH reading for this TC again.
+         */
+        nc_restart_bcch (index);
+      }
+    }
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : alr_nc                     |
+| STATE   : code                ROUTINE : nc_restart_bcch            |
++--------------------------------------------------------------------+
+
+  PURPOSE : Stop old request and start new request to layer 1.
+
+*/
+
+LOCAL void nc_restart_bcch (USHORT index)
+{
+  GET_INSTANCE_DATA;
+  PALLOC (ncell_bcch, MPHC_NCELL_BCCH_REQ);
+
+  if (alr_data->nc_data.c_bcch_req > 0)
+  {
+    /*
+     * if necessary stop previous request to avoid on the fly change
+     */
+    ma_nc_stop_ncell_bcch_req(alr_data->nc_data.cell[index].ba_arfcn);
+  }
+
+  ncell_bcch->radio_freq           = ARFCN_TO_L1(alr_data->nc_data.cell[index].ba_arfcn);
+  ncell_bcch->fn_offset            = alr_data->nc_data.cell[index].frame_offset;
+  ncell_bcch->time_alignment       = alr_data->nc_data.cell[index].time_align;
+  ncell_bcch->tsc                  = (UBYTE)(alr_data->nc_data.cell[index].bsic & ONLY_BCC);
+  ncell_bcch->bcch_blocks_required = alr_data->nc_data.cell[index].blocks_required;
+#ifdef GPRS
+  /*if the mobile is in PTM the GPRS_PRIORITY must be set to TOP*/
+  if(alr_data->pch_data.pl_idle.page_mode EQ PGM_REORG OR
+     alr_data->pch_data.pl_idle.page_mode EQ PGM_REORG_CS OR
+     alr_data->pch_data.reorg_bcch_reading EQ TRUE OR
+     alr_data->nc_data.cell[index].new_strong_cell OR
+     !alr_data->nc_data.cell[index].c_attempt OR  // EQ 0
+     ma_is_ptm())
+  {
+    ncell_bcch->gprs_prio            = GPRS_PRIO_TOP;
+  }
+  else
+#endif
+    ncell_bcch->gprs_prio            = GPRS_PRIO_NORM;
+
+  /*
+   * and start next request
+   */
+  ma_nc_bcch_req (ncell_bcch);
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : alr_nc                     |
+| STATE   : code                ROUTINE : nc_store_sync_ind          |
++--------------------------------------------------------------------+
+
+  PURPOSE : stores the data of an MPHC_NCELL_SYNC_IND end enters
+            a new state of ncell.
+
+*/
+
+LOCAL void nc_store_sync_ind (USHORT index,
+                              T_MPHC_NCELL_SYNC_IND *sync_ind,
+                              UBYTE new_status)
+{
+  GET_INSTANCE_DATA;
+  T_NC* pcell = &alr_data->nc_data.cell[index];
+  pcell->bsic         = (UBYTE)(sync_ind->bsic & ONLY_BSIC);
+  pcell->frame_offset = sync_ind->fn_offset;
+  pcell->time_align   = sync_ind->time_alignment;
+  pcell->tim_valid    = TV_VALID_TIMING_INFO;
+  nc_set_status (index, new_status);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : alr_nc                     |
+| STATE   : code                ROUTINE : nc_sync_ind                |
++--------------------------------------------------------------------+
+
+  PURPOSE : Confirmation for a synchronisation request to layer 1.
+
+*/
+
+GLOBAL void nc_sync_ind (T_MPHC_NCELL_SYNC_IND *sync_ind)
+{
+  GET_INSTANCE_DATA;
+  USHORT  index;
+  UBYTE   bsic = (UBYTE)(sync_ind->bsic & ONLY_BSIC);
+  USHORT  arfcn;
+
+#ifdef TI_PS_FF_QUAD_BAND_SUPPORT
+  if (alr_data->plmn_search_running AND (alr_multiband_std NEQ NOT_PRESENT_8BIT))
+    arfcn = ARFCN_STD_TO_G23 (sync_ind->radio_freq, alr_multiband_std)&ARFCN_MASK;
+  else
+#endif
+    arfcn = ARFCN_TO_G23(sync_ind->radio_freq)&ARFCN_MASK;
+
+  index = nc_get_index (arfcn);
+
+  switch (GET_STATE (STATE_NC))
+  {
+    case NC_IDLE:
+    case NC_DEDICATED:
+#ifdef GPRS
+    case NC_PIM_PBCCH:
+    case NC_PTM_PBCCH: /*XXX*/
+#endif
+      TRACE_EVENT_P5("nc_sync_ind[%d] sb_flag=%d fn_offset=%ld time_alignment=%ld bsic=%d",
+                      arfcn, sync_ind->sb_flag, sync_ind->fn_offset,
+                      sync_ind->time_alignment, sync_ind->bsic);
+      if (alr_data->nc_data.c_sync_req > 0)
+        alr_data->nc_data.c_sync_req--;
+
+#if defined (REL99) && defined (TI_PS_FF_EMR)
+      /*EMR :If all the previous sync requests are successful, start fresh ranking for
+        sync requests*/
+      if (  (alr_data->nc_data.emr_data.rep_type EQ REP_TYPE_ENH ) AND
+            (alr_data->nc_data.c_sync_req EQ 0) )           
+      {
+        alr_data->nc_data.rank_cell_bmp = 0; 
+      }
+#endif
+      if (alr_data->nc_data.cell[LAST_BSIC_REQ].status EQ READ_FB_SB_PENDING AND
+          alr_data->nc_data.cell[LAST_BSIC_REQ].ba_arfcn EQ arfcn AND
+#ifdef GPRS
+          (GET_STATE(STATE_NC) EQ NC_IDLE OR GET_STATE(STATE_NC) EQ NC_PIM_PBCCH)
+         )
+#else
+           GET_STATE(STATE_NC) EQ NC_IDLE
+         )
+#endif
+      {
+        nc_sync_ind_last_bsic_req(sync_ind,index,arfcn,bsic);
+      }
+      else
+      {
+        if (index NEQ NOT_PRESENT_16BIT AND
+            index NEQ LAST_BSIC_REQ)
+        {
+          nc_sync_ind_ncell(sync_ind,index,arfcn,bsic);
+        }   /* valid index   check */
+        else if (alr_data->nc_data.eotd_avail AND
+                 alr_data->nc_data.ppos_ind NEQ NULL)
+          nc_check_sync_ind_eotd(sync_ind, arfcn);
+           /* LAST_BSIC_REQ check */
+        else if ( (index EQ NOT_PRESENT_16BIT) AND (IS_EXT_MEAS_RUNNING) AND
+                    (GET_STATE(STATE_NC) EQ NC_IDLE))
+        {
+          if ( alr_data->cs_data.ext_meas_state_pend NEQ CS_NULL )
+          {
+            nc_stop_ext_meas_ind();
+            alr_data->cs_data.ext_meas_state_pend = CS_NULL;
+            return;
+          }
+        }
+      }
+
+      if( alr_data->nc_data.c_sync_intrupted EQ TRUE AND alr_data->nc_data.c_sync_req EQ 0)
+      {
+        nc_enable_conf();
+        alr_data->nc_data.c_sync_intrupted = FALSE;
+      }
+
+      if(GET_STATE(STATE_NC_PROC) EQ NC_ACQUIRE)
+      {
+        nc_process_status();
+      }
+
+      break;
+    default:
+      break;
+  } /* STATE_NC */
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : alr_nc                     |
+| STATE   : code                ROUTINE : nc_sync_ind_last_bsic_req  |
++--------------------------------------------------------------------+
+
+  PURPOSE : Confirmation of the LAST_BSIC_REQ synchronisation request
+
+*/
+
+LOCAL void nc_sync_ind_last_bsic_req(T_MPHC_NCELL_SYNC_IND* sync_ind,
+                                     USHORT index,
+                                     USHORT arfcn,
+                                     UBYTE bsic)
+{
+  GET_INSTANCE_DATA;
+
+  /*
+   * decoding of FB / SB of hplmn cell is in progress
+   * send confirmation to RR.
+   */
+  PALLOC (mph_bsic_cnf, MPH_BSIC_CNF);
+
+  mph_bsic_cnf->arfcn = arfcn;
+  mph_bsic_cnf->bsic  = bsic;
+
+  if (sync_ind->sb_flag EQ SB_FOUND)
+  {
+    ALR_TRACE_NC_BSIC_CNF(sync_ind->radio_freq);
+
+    /*
+     * FCB and SCB found, set result code
+     */
+    mph_bsic_cnf->cs = CS_NO_ERROR;
+
+#if TI_PS_FF_QUAD_BAND_SUPPORT
+    if (alr_data->plmn_search_running AND (alr_multiband_std NEQ NOT_PRESENT_8BIT))
+    {
+      mph_bsic_cnf->arfcn = STD_ADD_TO_ARFCN(arfcn, alr_multiband_std);
+      /* US_BIT should be used to differentiate an US frequency channel. */
+      switch (alr_multiband_std)
+      {
+        case STD_1900:
+        case STD_850:
+        case STD_DUAL_US:
+          mph_bsic_cnf->arfcn |= US_BIT;
+          break;
+        case STD_850_1800:
+        case STD_850_900_1800:
+          if ((arfcn >= LOW_CHANNEL_850) && (arfcn <= HIGH_CHANNEL_850))
+            mph_bsic_cnf->arfcn |= US_BIT;
+          break;
+        case STD_900_1900:
+          if ((arfcn >= LOW_CHANNEL_1900) && (arfcn <= HIGH_CHANNEL_1900))
+            mph_bsic_cnf->arfcn |= US_BIT;
+          break;
+        case STD_850_900_1900:
+          if (arfcn >= HIGH_CHANNEL_900)
+            mph_bsic_cnf->arfcn |= US_BIT;
+          break;
+        default:
+          break;
+      }
+    }
+#endif
+    
+    if ( IS_EXT_MEAS_RUNNING )
+    {
+      nc_set_status (LAST_BSIC_REQ, IDLE);
+      alr_data->nc_data.cell[LAST_BSIC_REQ].ba_arfcn = NOT_PRESENT_16BIT;
+
+      if ( alr_data->cs_data.ext_meas_state_pend NEQ CS_NULL )
+      {
+        PFREE ( mph_bsic_cnf );
+        nc_stop_ext_meas_ind();
+      }
+      else
+      {
+        ma_bsic_cnf (mph_bsic_cnf);
+      }
+      return;
+    }
+
+    ALR_EM_NEIGHBOURCELL_BCCH(EM_AVAIL);
+
+    /* save data for next cell reselection */
+    {
+      T_NC *pcr_cell = &alr_data->nc_data.cr_cell;
+      pcr_cell->ba_arfcn = arfcn;
+      pcr_cell->bsic = bsic;
+      pcr_cell->frame_offset = sync_ind->fn_offset;
+      pcr_cell->time_align = sync_ind->time_alignment;
+    }
+
+    ma_bsic_cnf (mph_bsic_cnf);
+
+    nc_store_sync_ind (LAST_BSIC_REQ, sync_ind, READ_BCCH);
+#ifdef GPRS
+    /* don't do the next checks for PBCCH just return
+     * maybe later TODO(opt)
+     */
+    if (GET_STATE (STATE_NC) EQ NC_PIM_PBCCH OR
+        GET_STATE (STATE_NC) EQ NC_PTM_PBCCH)
+    {
+      return;
+    }
+#endif
+
+    index = nc_get_index (arfcn);
+
+    if(index NEQ LAST_BSIC_REQ AND
+       index NEQ NOT_PRESENT_16BIT)
+    {
+      /*
+       * check BSIC of the incoming BCCH message
+       */
+      switch (nc_check_bsic (index, bsic))
+      {
+        case NC_CHECK_OK:
+          /*
+           * channel has passed NCC permitted check.
+           */
+          switch (alr_data->nc_data.cell[index].status)
+          {
+
+            case IDLE:
+              /* This patch helps during parallel search in Limited service.
+               * Cell synchronised in the last BSIC_REQ fromm RR during parallel
+               * search is also a part of BA list. In such a case, we store the
+               * synchrinisation information, so that its can be used later by
+               * nc_start_reselect. 
+               */
+              if(alr_data->nc_data.cell[index].one_of_twelve)
+                nc_store_sync_ind (index, sync_ind, READ_BCCH_RR_NOT_INFORMED);
+              else
+                nc_store_sync_ind (index, sync_ind, IDLE_SYNC);                
+              break;
+
+            case READ_FB_SB:
+            /*
+               * the channel shall start synchronisation of FB/SB
+               * so reading of BCCH shall be started.
+               */
+              if(alr_data->nc_data.cell[index].one_of_six AND
+                 GET_STATE(STATE_NC) NEQ NC_DEDICATED)
+                nc_store_sync_ind (index, sync_ind, READ_BCCH_RR_NOT_INFORMED);
+              else if(alr_data->nc_data.cell[index].one_of_twelve)
+                nc_store_sync_ind (index, sync_ind, FB_SB_SYNC);
+              break;
+
+            case READ_SB:
+              /*
+               * the channel shall start synchronisation of SB
+               * so this is done.
+               */
+              if(alr_data->nc_data.cell[index].one_of_twelve)
+                nc_store_sync_ind (index, sync_ind, FB_SB_SYNC);
+              break;
+
+            case FB_SB_FAILED:
+              /*
+               * A channel synchronisation has failed in the past.
+               * Now it is synchronized again. Start BCCH reading
+               * and send this information to RR after indicating
+               * the synchronisation with next measurement report.
+               */
+              if(alr_data->nc_data.cell[index].one_of_six AND
+                GET_STATE(STATE_NC) NEQ NC_DEDICATED)
+                nc_store_sync_ind (index, sync_ind, READ_BCCH_RR_NOT_INFORMED);
+              else if(alr_data->nc_data.cell[index].one_of_twelve)
+                nc_store_sync_ind (index, sync_ind, FB_SB_SYNC);
+              break;
+
+
+            case READ_SB_BCCH:
+              /*
+               * the channel shall start synchronisation of SB
+               * followed by BCCH reading. SB synchronisation
+               * is done.
+               */
+              if(alr_data->nc_data.cell[index].one_of_six)
+                nc_store_sync_ind (index, sync_ind, READ_BCCH);
+              break;
+
+            case READ_FB_SB_PENDING:
+            case READ_SB_PENDING:
+            case READ_SB_BCCH_PENDING:
+            case READ_BCCH_PENDING:
+            case READ_BCCH_PENDING_RR_NOT_INFORMED:
+              /*
+               * REMARK: this shall not happen, because this
+               *         attempt shall be killed if RR requests
+               *         procedure for the channel.
+               */
+              ALR_TRACE_NC ("Abnormal situation sync ind");
+              break;
+
+            default:
+              break;
+          }
+          break;
+
+        case NC_CHECK_BSIC_CHANGED:
+          /*
+           * BSIC of the channel has changed.
+           */
+          switch (alr_data->nc_data.cell[index].status)
+          {
+            case READ_SB:
+              /*
+               * the channel shall start synchronisation of SB
+               * so this is done, but a changed BSIC is stored.
+               * Read BCCH of the channel and forward to RR.
+               */
+              if(alr_data->nc_data.cell[index].one_of_six AND
+                 GET_STATE(STATE_NC) NEQ NC_DEDICATED)
+                nc_store_sync_ind (index, sync_ind, READ_BCCH_RR_NOT_INFORMED);
+              else if(alr_data->nc_data.cell[index].one_of_twelve)
+                nc_store_sync_ind (index, sync_ind, FB_SB_SYNC);
+              break;
+
+            case FB_SB_FAILED:
+              /*
+               * A channel synchronisation has failed in the past.
+               * Now it is synchronized again. Start BCCH reading
+               * and send this information to RR after indicating
+               * the synchronisation with next measurement report.
+               */
+              if(alr_data->nc_data.cell[index].one_of_six AND
+                 GET_STATE(STATE_NC) NEQ NC_DEDICATED)
+                nc_store_sync_ind (index, sync_ind, READ_BCCH_RR_NOT_INFORMED);
+              else if(alr_data->nc_data.cell[index].one_of_twelve)
+                nc_store_sync_ind (index, sync_ind, FB_SB_SYNC);
+              break;
+
+            case READ_SB_BCCH:
+                /*
+                 * the channel shall start synchronisation of SB
+                 * followed by BCCH reading. SB synchronisation
+                 * is done. Read BCCH of the channel and forward to RR.
+                 */
+              if(alr_data->nc_data.cell[index].one_of_six)
+                nc_store_sync_ind (index, sync_ind, READ_BCCH_RR_NOT_INFORMED);
+              break;
+
+            case READ_FB_SB:
+            case READ_FB_SB_PENDING:
+            case READ_SB_PENDING:
+            case READ_SB_BCCH_PENDING:
+            case READ_BCCH_PENDING:
+            case READ_BCCH_PENDING_RR_NOT_INFORMED:
+              /*
+               * REMARK: this shall not happen, because this
+               *         attempt shall be killed if RR requests
+               *         procedure for the channel.
+               */
+              ALR_TRACE_NC ("Abnormal situation sync ind (changed BSIC)");
+              break;
+
+            default:
+              break;
+          }
+          break;
+
+        case NC_CHECK_NCC_FAILED:
+          /*
+           * ncc permitted check failed
+           */
+          nc_set_status (index, EXCLUDED);
+          break;
+
+        default:
+          break;
+      }
+    }
+
+    ALR_EM_NEIGHBOURCELL_BSIC_CONFIRM(EM_AVAIL);
+
+  }
+  else
+  {
+    /*
+     * FCB and SCB not found, set result code,
+     * mark cell[LAST_BSIC_REQ] and cr_cell as invalid
+     * and send negative answer to RR
+     */
+    mph_bsic_cnf->cs = CS_NO_BCCH_AVAIL;
+    nc_set_status (LAST_BSIC_REQ, IDLE);
+    alr_data->nc_data.cell[LAST_BSIC_REQ].ba_arfcn = NOT_PRESENT_16BIT;
+    alr_data->nc_data.cr_cell.ba_arfcn = NOT_PRESENT_16BIT;
+
+    ma_bsic_cnf (mph_bsic_cnf);
+
+    ALR_EM_NEIGHBOURCELL_BSIC_CONFIRM(EM_NOT_AVAIL);
+
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : alr_nc                     |
+| STATE   : code                ROUTINE : nc_sync_ind_ncell          |
++--------------------------------------------------------------------+
+
+  PURPOSE : Confirmation of a ncell synchronisation request
+
+*/
+
+LOCAL void nc_sync_ind_ncell(T_MPHC_NCELL_SYNC_IND* sync_ind,
+                             USHORT index,
+                             USHORT arfcn,
+                             UBYTE  bsic)
+{
+  GET_INSTANCE_DATA;
+#ifdef GPRS
+  BOOL bsic_chg = FALSE;
+#endif
+
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+    /* Differentiate normal sync ind from the reconfirmation case,
+     * decrement the sync req counter if it is not reconfirmation case.
+     */
+  if(alr_data->nc_data.cell[index].tim_valid EQ TV_RTD_TIMING_INFO AND 
+      alr_data->nc_data.cell[index].c_sync_req > 0)
+     alr_data->nc_data.cell[index].c_sync_req--;
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+
+
+  if (GET_STATE(STATE_NC_PROC) EQ NC_CONFIRM)
+  {
+    /* eotd confirmation is active */
+    if(alr_data->nc_data.eotd_avail)
+      nc_check_sync_ind_eotd(sync_ind, arfcn);
+
+    TRACE_EVENT_P2("sync_ind[%u] c_sync_req=%u", arfcn, alr_data->nc_data.c_sync_req);
+    /*
+     * check if the end of the CONFIRM procedure (LIST_REQ) is
+     * reached
+     * this is done here because it is independent from EOTD
+     */
+    if(alr_data->nc_data.c_sync_req EQ 0)
+    {
+      nc_enable_conf();
+    }
+    /*
+     * skip the rest of this function for scell
+     * because the status for the scell is always FB_SB_SYNC
+     */
+    if(alr_data->nc_data.eotd_avail AND
+       arfcn EQ alr_data->serving_cell)
+      return;
+  }
+
+  if (sync_ind->sb_flag EQ SB_FOUND)
+  {
+    /*
+     * Synchronization successful for a normal member of the BA list.
+     */
+    ALR_TRACE_NC_SB_IND_PASSED(arfcn);
+
+    ALR_EM_NEIGHBOURCELL_SB(EM_AVAIL);
+
+  switch (GET_STATE (STATE_NC))
+  {
+    case NC_IDLE:
+    case NC_DEDICATED:
+      /*
+       * check neighbourcell
+       */
+      switch (nc_check_bsic (index, bsic))
+      {
+        case NC_CHECK_OK:
+          /*
+           * channel has passed NCC permitted check.
+           */
+          switch (alr_data->nc_data.cell[index].status)
+          {
+            case READ_FB_SB_PENDING:
+              /*
+               * initial synchronization to FB and SB
+               * if the cell is a 1o6 we read the BCCH
+               * otherwise we just set it to synchronized
+               */
+
+              if(alr_data->nc_data.cell[index].one_of_six AND
+                 GET_STATE(STATE_NC) NEQ NC_DEDICATED)
+              {
+                nc_store_sync_ind (index, sync_ind, READ_BCCH_RR_NOT_INFORMED);
+              }
+              else if(alr_data->nc_data.cell[index].one_of_twelve)
+                nc_store_sync_ind (index, sync_ind, FB_SB_SYNC);
+              else
+              {
+                TRACE_EVENT_P1("sync ind for not 1o12 cell %d", arfcn);
+              }
+              break;
+
+            case READ_SB_PENDING:
+              /*
+               * confirmation of SB
+               */
+              alr_data->nc_data.cell[index].c_attempt = 0;
+              if(alr_data->nc_data.cell[index].one_of_twelve)
+                nc_store_sync_ind (index, sync_ind, FB_SB_SYNC);
+              else
+                nc_store_sync_ind (index, sync_ind, IDLE_SYNC);
+              break;
+
+            case READ_SB_BCCH_PENDING:
+              /*
+               * confirmation of SB before reading
+               * neighbour cell BCCH all five minutes.
+               */
+              if(alr_data->nc_data.cell[index].one_of_six AND
+                 GET_STATE(STATE_NC) EQ NC_IDLE)
+              {
+                nc_store_sync_ind (index, sync_ind, READ_BCCH);
+              }
+              else
+              {
+                alr_data->nc_data.cell[index].c_attempt = 0;
+                if(alr_data->nc_data.cell[index].one_of_twelve)
+                  nc_store_sync_ind (index, sync_ind, FB_SB_SYNC);
+                else
+                  nc_store_sync_ind (index, sync_ind, IDLE_SYNC);
+              }
+              break;
+            case READ_BCCH_RR_NOT_INFORMED: /*TODO(opt)*/
+            case READ_BCCH_PENDING_RR_NOT_INFORMED:/*TODO(opt)*/
+            case READ_BCCH:/*TODO(opt)*/
+            case READ_BCCH_PENDING:/*TODO(opt)*/
+              TRACE_ERROR("sync_ind for ncell in READ_BCCH*");
+              if(alr_data->nc_data.cell[index].one_of_six AND
+                 GET_STATE(STATE_NC) EQ NC_IDLE)
+              {
+                nc_store_sync_ind (index, sync_ind, FB_SB_SYNC);
+              }
+              break;
+            default:
+              break;
+          } /*switch(status)*/
+          break;
+        case NC_CHECK_BSIC_CHANGED:	
+          /*
+           * channel has passed NCC permitted check,
+           * but a changed BSIC has been detected.
+           */
+          switch (alr_data->nc_data.cell[index].status)
+          {
+            case READ_SB_PENDING:
+            case READ_SB_BCCH_PENDING:
+              /*
+               * confirmation of SB indicates new BSIC
+               */
+              if(alr_data->nc_data.cell[index].one_of_six AND
+                 GET_STATE(STATE_NC) NEQ NC_DEDICATED)
+              {
+                nc_store_sync_ind (index, sync_ind, READ_BCCH_RR_NOT_INFORMED);
+              }
+              else if(alr_data->nc_data.cell[index].one_of_twelve)
+              {
+                alr_data->nc_data.cell[index].c_attempt = 0;
+                nc_store_sync_ind (index, sync_ind, FB_SB_SYNC);
+              }
+              else
+              {
+                TRACE_EVENT_P1("sync ind for not 1o12 cell %d", arfcn);
+                nc_store_sync_ind (index, sync_ind, IDLE_SYNC);
+              }
+              break;
+
+            default:
+              break;
+          } /*switch(status)*/
+          break;
+
+        case NC_CHECK_NCC_FAILED:
+          /*
+           * ncc permitted check failed. Attempt again.
+           * BSIC of a cell may always change. So do not
+           * exclude this cell in IDLE mode meaurements
+           */
+          if(GET_STATE(STATE_NC) EQ NC_IDLE)
+          {
+            alr_data->nc_data.cell[index].c_attempt = 0;
+            nc_set_fb_sb_failed (index, TEN_SECONDS);
+          }
+          else if(GET_STATE(STATE_NC) EQ NC_DEDICATED)
+          {
+            alr_data->nc_data.cell[index].c_attempt = 0;
+            nc_set_fb_sb_failed (index, THIRTY_SECONDS);
+          }
+          else
+          {
+            nc_set_status (index, EXCLUDED);
+          }
+          break;
+        }
+        break;
+#ifdef GPRS
+      case NC_PIM_PBCCH:
+      case NC_PTM_PBCCH: /*XXX*/
+        TRACE_EVENT("sync_ind PBCCH");
+        switch (alr_data->nc_data.cell[index].status)
+        {
+            case READ_FB_SB_PENDING:
+              nc_store_sync_ind (index, sync_ind, FB_SB_SYNC);
+              nc_inform_grr_of_ncell(index, GRR_SB_FOUND);
+              break;
+            case READ_SB_PENDING:
+              if(bsic NEQ alr_data->nc_data.cell[index].bsic)
+                bsic_chg = TRUE;
+              else
+                bsic_chg = FALSE;
+
+              if(alr_data->nc_data.cell[index].one_of_twelve)
+                nc_store_sync_ind (index, sync_ind, FB_SB_SYNC);
+              else
+                nc_store_sync_ind (index, sync_ind, IDLE_SYNC);
+
+              if(bsic_chg)
+                nc_inform_grr_of_ncell(index, GRR_SB_FOUND);
+              break;
+            default:
+              break;
+        }
+        break;
+      default:
+        break;
+#endif
+    } /* NC_STATE */
+  }
+  else /* sb_flag EQ FALSE */
+  {
+    /*
+     * Synchronization failed
+     */
+    ALR_TRACE_NC_SB_FAILED (sync_ind->radio_freq);
+    if (alr_data->nc_data.cell[index].ba_status EQ IN_BA)
+    {
+      switch (alr_data->nc_data.cell[index].status)
+      {
+        case READ_FB_SB_PENDING:
+        case READ_SB_PENDING:
+        case READ_SB_BCCH_PENDING:
+
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+         /* 
+          * NC sync with all RTD values for that ARFCN has failed,
+          * need to try with normal sync with out RTD value.If any
+          * of the sync indication have succeded then status would 
+          * changed to BCCH reading.
+          */
+          if(alr_data->nc_data.cell[index].c_sync_req EQ 0 AND 
+            alr_data->nc_data.cell[index].tim_valid EQ TV_RTD_TIMING_INFO)
+          {
+            if(alr_data->nc_data.c_sync_req < MAX_L1_SYNC_CNT)
+            {
+              /* invalidate the rtd information because we couldn't sync using this values */
+              alr_data->nc_data.emr_data.enh_para.enh_cell_list[index].v_rtd = 0;
+              alr_data->nc_data.cell[index].tim_valid = TV_INVALID_TIMING_INFO;
+              nc_build_sync_req(index);
+              ALR_TRACE_NC ("ncell_sync_req");
+            } /*if*/
+          } 
+          if(alr_data->nc_data.cell[index].c_sync_req EQ 0 AND 
+            (alr_data->nc_data.cell[index].tim_valid NEQ TV_RTD_TIMING_INFO ))
+          {
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+
+
+          ALR_EM_NEIGHBOURCELL_SB(EM_NOT_AVAIL);
+
+          if(GET_STATE(STATE_NC) EQ NC_IDLE)
+            nc_sync_failed_attempt(index);
+          else if(GET_STATE(STATE_NC) EQ NC_DEDICATED)
+            nc_sync_failed_attempt_dedicated(index);
+#ifdef GPRS /*XXX*/
+          else
+            nc_sync_failed_gprs(index);
+#endif
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+          }
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+
+          break;
+        default:
+          break;
+      }
+    }
+    else
+    { /*
+       * the cell currently or perhaps for a longer time doesn't
+       * belong to the BA list, no more attempts to synchronize now
+       */
+      switch (alr_data->nc_data.cell[index].status)
+      {
+        case READ_FB_SB_PENDING:
+          nc_set_status (index, IDLE);
+          break;
+        case READ_SB_PENDING:
+          alr_data->nc_data.cell[index].c_attempt++;
+          alr_data->nc_data.cell[index].tim_valid = TV_APPROX_TIMING_INFO;
+          nc_set_status (index, READ_SB);
+          break;
+        case READ_SB_BCCH_PENDING:
+          alr_data->nc_data.cell[index].c_attempt++;
+          alr_data->nc_data.cell[index].tim_valid = TV_APPROX_TIMING_INFO;
+          nc_set_status (index, READ_SB_BCCH);
+          break;
+        default:
+          break;
+      }
+    }
+  } /* error_flag    check */
+
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+  if((alr_data->nc_data.nxt_ind NEQ 0) AND (alr_data->nc_data.cell[index].tim_valid EQ TV_RTD_TIMING_INFO))
+    SET_STATE(STATE_NC_PROC,NC_ACQUIRE);
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_check_sync_ind_eotd     |
++--------------------------------------------------------------------+
+
+  PURPOSE : copies the measurement results to the MPH_NCELL_POS_IND
+            while EOTD is active
+
+*/
+LOCAL void nc_check_sync_ind_eotd (T_MPHC_NCELL_SYNC_IND* sync_ind, USHORT arfcn)
+{
+  GET_INSTANCE_DATA;
+  T_MPH_NCELL_POS_IND* ppos_ind;
+
+  if ((ppos_ind = alr_data->nc_data.ppos_ind) EQ NULL)
+  {
+    TRACE_ERROR("nc_check_sync_ind_eotd() while alr_data->nc_data.ppos_ind==0");
+    return;
+  }
+
+  if (arfcn EQ alr_data->serving_cell)
+  {
+    if (ppos_ind->eotd_res EQ 0) /*0 doesn't mean EOTD_SUCC here
+                                   - it indicates that no SC results are present*/
+    {
+      nc_store_eotd(&(ppos_ind->eotd_sc_res), sync_ind, arfcn);
+      ppos_ind->fn = sync_ind->fn_in_sb;
+      ppos_ind->eotd_res++;
+    }
+    else  /*first EOTD results for SC are already present
+           - now continue with second SC results*/
+    {
+      nc_store_eotd((T_eotd_sc_res*)(&(ppos_ind->eotd_sc_res1)), sync_ind,
+                    arfcn);
+      ppos_ind->eotd_res = EOTD_SUCC;
+      ppos_ind->ta       = GET_STATE(STATE_NC) EQ NC_DEDICATED ?
+                                alr_data->nc_data.tav : NOT_PRESENT_8BIT;
+      PSENDX (RR, ppos_ind);
+      alr_data->nc_data.ppos_ind = NULL;
+
+      if (alr_data->nc_data.ppos_req NEQ NULL)
+      {
+        PFREE(alr_data->nc_data.ppos_req);
+        alr_data->nc_data.ppos_req = NULL;
+      }
+    }
+  }
+  else
+  {
+    if (ppos_ind->c_eotd_nc_res < MAX_NCELL_EOTD_RES)
+    {
+      nc_store_eotd((T_eotd_sc_res*)(
+        &(ppos_ind->eotd_nc_res[ppos_ind->c_eotd_nc_res])) , sync_ind, arfcn);
+      (ppos_ind->c_eotd_nc_res)++;
+    }
+    else
+      TRACE_ERROR("more than MAX_NCELL_EOTD_RES ncell sync indications");
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_sync_failed_attempt     |
++--------------------------------------------------------------------+
+
+  PURPOSE : A synchronisation attempt has failed during idle mode.
+
+*/
+LOCAL void nc_sync_failed_attempt (USHORT index)
+{
+  GET_INSTANCE_DATA;
+  switch (alr_data->nc_data.cell[index].c_attempt)
+  {
+    case 0:
+    case 1:
+    case 2:
+    case 3:
+      /*
+       * for attempts 1 to 4 try it again
+       * after ten seconds
+       */
+      nc_set_fb_sb_failed (index, TEN_SECONDS);
+       
+      break;
+    default:
+      /*
+       * if there are more attempts, exclude
+       * the cell from further attempts
+       * Store last fieldstrength value
+       */
+      nc_set_status (index, EXCLUDED);
+      break;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103) MODULE  : ALR_NC                           |
+| STATE   : code          ROUTINE : nc_sync_failed_attempt_dedicated |
++--------------------------------------------------------------------+
+
+  PURPOSE : A synchronisation attempt has failed during dedicated mode.
+
+*/
+LOCAL void nc_sync_failed_attempt_dedicated (USHORT index)
+{
+  GET_INSTANCE_DATA;
+  /*
+   * Store last fieldstrength value
+   */
+  switch (alr_data->nc_data.cell[index].c_attempt)
+  {
+    case 0:
+    case 1:
+    case 2:
+      /*
+       * for attempts 1 to 3 try it again immediately
+       */
+      alr_data->nc_data.cell[index].c_attempt++;
+      if (alr_data->nc_data.cell[index].status EQ READ_FB_SB_PENDING)
+        alr_data->nc_data.cell[index].tim_valid = TV_INVALID_TIMING_INFO;
+      else
+        alr_data->nc_data.cell[index].tim_valid = TV_APPROX_TIMING_INFO;
+      nc_set_status (index, READ_FB_SB);
+      break;
+    default:
+      /*
+       * if there are more attempts, exclude
+       * the cell from further attempts
+       */
+      nc_set_status (index, EXCLUDED);
+      break;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_start_dedicated         |
++--------------------------------------------------------------------+
+
+  PURPOSE : Process signal nc_start_dedicated from SDL process
+            Main_Control.
+
+*/
+
+GLOBAL void nc_start_dedicated (UBYTE pwrc, UBYTE dtx)
+{
+  GET_INSTANCE_DATA;
+  USHORT i;
+
+  switch(GET_STATE(STATE_NC))
+  {
+    case NC_CON_EST:
+      for (i = 0; i < alr_data->nc_data.c_ba_arfcn; i++)
+      {
+        switch (alr_data->nc_data.cell[i].status)
+        {
+          case READ_BCCH_RR_NOT_INFORMED:
+          case FB_SB_SYNC_RR_NOT_INFORMED:
+          case READ_BCCH:
+            /*
+             * BCCH reading is not needed during dedicated mode,
+             * but SB synchronisation is already done.
+             * clear a stored BCCH if needed.
+             */
+            nc_set_status (i, FB_SB_SYNC);
+            break;
+
+          case READ_SB_BCCH:
+            nc_set_status (i, READ_SB);
+            break;
+
+          case READ_FB_SB_PENDING:
+          case READ_SB_PENDING:
+          case READ_SB_BCCH_PENDING:
+          case READ_BCCH_PENDING_RR_NOT_INFORMED:
+          case READ_BCCH_PENDING:
+            TRACE_ERROR("Abnormal situation nc_start_dedi");
+            nc_set_status (i, IDLE);
+            break;
+          case FB_SB_FAILED:
+            nc_set_status (i, IDLE);
+            break;
+          case IDLE_SYNC:
+            if (alr_data->nc_data.cell[i].c_sync > 0)
+              alr_data->nc_data.cell[i].c_sync = TEN_SECONDS;
+            break;
+          default:
+            break;
+        }
+      }
+
+      nc_clear_last_bsic();
+
+      alr_data->nc_data.pwrc = pwrc;
+      alr_data->nc_data.dtx = dtx;
+
+      SET_STATE (STATE_NC, NC_DEDICATED);
+      nc_enable_conf();
+      break;
+    default:
+      TRACE_ERROR("nc_start_dedicated in wrong state");
+      break;
+  }
+
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_suspend                 |
++--------------------------------------------------------------------+
+
+  PURPOSE : This stops all active processes like FB/SB and BCCH reading
+            if
+            - the mobile start connection establishment
+            - RR requests power measurements parallel to idle mode
+            - leave dedicated mode.
+
+*/
+
+GLOBAL void nc_suspend (void)
+{
+  GET_INSTANCE_DATA;
+  ALR_TRACE_NC( "nc_suspend");
+
+  switch (GET_STATE(STATE_NC))
+  {
+    case NC_IDLE:
+    case NC_DEDICATED:
+      nc_clear_last_bsic();
+      nc_stop_all();
+      nc_disable_conf(FREE_POS_IND);
+
+      SET_STATE(STATE_NC, NC_CON_EST);
+      break;
+    case NC_CON_EST:
+      break;
+#ifdef GPRS
+    case NC_PIM_PBCCH:
+      if(alr_data->nc_data.cell[LAST_BSIC_REQ].status NEQ IDLE)
+        nc_clear_last_bsic();
+      /*lint -fallthrough*/
+    case NC_PTM_PBCCH:
+      nc_stop_all();
+      nc_disable_conf(FREE_POS_IND);
+      SET_STATE(STATE_NC, NC_CON_EST);
+      break;
+#endif
+    default:
+      break;
+  }
+}
+
+GLOBAL void nc_suspend_handover (void)
+{
+  GET_INSTANCE_DATA;
+        
+  ALR_TRACE_NC( "nc_suspend_handover");
+
+  switch (GET_STATE(STATE_NC))
+  {
+    case NC_DEDICATED:
+      nc_stop_all();
+      nc_disable_conf(FREE_POS_IND);
+      break;
+  }
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : alr_nc                     |
+| STATE   : code                ROUTINE : nc_resume                  |
++--------------------------------------------------------------------+
+
+  PURPOSE : Only needed for alr_gprs.c
+
+*/
+
+GLOBAL void nc_resume (void)
+{
+  GET_INSTANCE_DATA;
+
+  SET_STATE (STATE_NC, NC_IDLE);
+  nc_enable_conf();
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_update_dedicated        |
++--------------------------------------------------------------------+
+
+  PURPOSE : Process signal nc_update_dedicated from SDL process
+            Dedi_Control.
+
+*/
+
+GLOBAL void nc_update_dedicated (UBYTE dtx, UBYTE pwrc)
+{
+  GET_INSTANCE_DATA;
+  UBYTE i, j;
+  UBYTE   c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+
+  switch(GET_STATE (STATE_NC))
+  {
+    case NC_DEDICATED:
+      {
+        PALLOC (upd_dedi, MPHC_UPDATE_BA_LIST);
+
+        /*
+         * updated values of pwrc or dtx can be configure
+         * only by sending a new neighbourcell list to layer 1
+         */
+        alr_data->nc_data.pwrc = pwrc;
+        alr_data->nc_data.dtx = dtx;
+
+        for (i = 0, j = 0; i < c_ba_arfcn; i++)
+        {
+          if (alr_data->nc_data.cell[i].ba_status EQ IN_BA)
+            upd_dedi->chan_list.radio_freq[j++] =
+              ARFCN_TO_L1(alr_data->nc_data.cell[i].ba_arfcn);
+        }
+
+        upd_dedi->num_of_chans = j;
+        alr_data->nc_data.ba_id = ALR_ALLOCATE_NEW_BA ( alr_data->nc_data.ba_id );
+        upd_dedi->ba_id = alr_data->nc_data.ba_id;
+        upd_dedi->pwrc = alr_data->nc_data.pwrc;
+        upd_dedi->dtx_allowed = alr_data->nc_data.dtx;
+
+        alr_data->nc_data.update = TRUE;
+        ma_nc_update_ba_list (upd_dedi);
+      }
+      break;
+    default:
+      TRACE_ERROR("nc_update_dedicated in wrong state");
+      break;
+  }
+}
+
+GLOBAL void nc_resume_dedicated(void)
+{
+  nc_enable_conf();
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_get_fn_time             |
++--------------------------------------------------------------------+
+
+  PURPOSE : Export Procedure to request frame offset and time
+            alignment of neighbour cells.
+
+            Returns FALSE if timing information not found.
+
+*/
+
+GLOBAL BOOL nc_get_fn_time (USHORT channel,
+                            ULONG *fn,
+                            ULONG *time)
+{
+  GET_INSTANCE_DATA;
+  USHORT index;
+  if( channel EQ alr_data->serving_cell)
+  {
+    *fn = 0;
+    *time = 0;
+    return TRUE;
+  }
+
+  /* Check if we have read SYNC on this channel */
+  index = nc_get_index (channel);
+  if (index NEQ NOT_PRESENT_16BIT)
+  {
+    *fn = alr_data->nc_data.cell[index].frame_offset;
+    *time = alr_data->nc_data.cell[index].time_align;
+
+    if(alr_data->nc_data.cell[index].tim_valid EQ TV_VALID_TIMING_INFO)
+    {
+#if defined (REL99) && defined (FF_BHO)
+      TRACE_EVENT_P1("ARFCN %d - Sync Info Present in NC data", channel);
+#endif
+      return TRUE;
+    }
+    else
+    {
+#if defined (REL99) && defined (FF_BHO)
+      alr_data->dedi_data.bho_cell_index = index;
+      TRACE_EVENT_P1("ARFCN %d - Sync Info NOT Present in NC data", channel);
+#endif
+      return FALSE;
+    }
+  }
+  else
+  {
+    *fn = NOT_PRESENT_32BIT;
+    *time = NOT_PRESENT_32BIT;
+#if defined (REL99) && defined (FF_BHO)
+    alr_data->dedi_data.bho_cell_index = index;
+    TRACE_EVENT_P1("ARFCN %d - NOT Present in NC data", channel);
+#endif
+    return FALSE;
+  }
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_start_reselect          |
++--------------------------------------------------------------------+
+
+  PURPOSE : Process signal nc_start_reselect from SDL process
+            Main_Control.
+
+*/
+
+GLOBAL void nc_start_reselect (USHORT arfcn)
+{
+  GET_INSTANCE_DATA;
+  USHORT  index;
+  T_NC    *pcell;
+
+  ALR_TRACE_NC_RESELECT(arfcn);
+
+  index = nc_get_index (arfcn);
+  if (index EQ NOT_PRESENT_16BIT)
+  {
+    if (arfcn NEQ alr_data->nc_data.cr_cell.ba_arfcn)
+    {
+      ma_error_ind (CS_BCCH_READ_ERROR, arfcn);
+      return;
+    }
+    else
+    {
+      pcell = &alr_data->nc_data.cr_cell;
+    }
+  }
+  else
+  {
+    pcell = &alr_data->nc_data.cell[index];
+
+    /* Cannot to reselect to a cell for which the synchronization information
+     * is not available
+     */
+    if (pcell->bsic EQ NOT_PRESENT_8BIT)
+    {
+       ma_error_ind (CS_NC_SYNC_FAILED, arfcn);
+       return;
+    }
+  }
+
+
+  {
+    PALLOC(reselect, MPHC_NEW_SCELL_REQ);
+
+    reselect->radio_freq = ARFCN_TO_L1(arfcn);
+    reselect->fn_offset = (ULONG)pcell->frame_offset;
+    reselect->time_alignment = (ULONG)pcell->time_align;
+    reselect->tsc = pcell->bsic;
+    alr_data->nc_data.channel = arfcn;
+
+    ALR_TRACE_NC_FN_TA(index, reselect->fn_offset, reselect->time_alignment);
+
+    ALR_EM_CONFIGURE_CELL_RESELECTION;
+
+    ma_new_scell_req(reselect);
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_report                  |
++--------------------------------------------------------------------+
+
+  PURPOSE : Process signal nc_report from SDL process
+            Main_Control.
+
+*/
+
+GLOBAL void nc_report (T_MPHC_RXLEV_PERIODIC_IND *rxlev_periodic_ind)
+{
+  GET_INSTANCE_DATA;
+        
+  ALR_TRACE_NC("nc_report");
+
+
+  switch(GET_STATE(STATE_NC))
+  {
+    case NC_IDLE:
+    case NC_CON_EST:
+      nc_store_rxlev (rxlev_periodic_ind);
+
+#ifdef GPRS
+      nc_rxlev_sc_req (rxlev_periodic_ind->s_rxlev);
+#endif
+      nc_check_activity();
+      break;
+    default:
+      TRACE_ERROR("nc_report in invalid state");
+      break;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_report_dedicated        |
++--------------------------------------------------------------------+
+
+  PURPOSE : Process signal nc_report_dedicated from SDL process
+            Main_Control.
+
+*/
+
+GLOBAL void nc_report_dedicated (T_MPHC_MEAS_REPORT *meas_report)
+{
+  GET_INSTANCE_DATA;
+        
+  switch(GET_STATE(STATE_NC))
+  {
+    case NC_DEDICATED:
+      nc_store_dedicated (meas_report);
+      nc_check_activity   ();
+      break;
+    default:
+      TRACE_ERROR("nc_report_dedicated in wrong state");
+      break;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_update_list             |
++--------------------------------------------------------------------+
+
+  PURPOSE : Procedure to update frame offset and time alignment after
+            cell change. All values are relative to the actual serving
+            cell.
+
+*/
+
+#define TDMA_FRAMES_PER_HYPERFRAME  2715648
+
+GLOBAL void nc_update_list (USHORT channel)
+{
+  GET_INSTANCE_DATA;
+  USHORT index;
+  USHORT i;
+
+  switch(GET_STATE(STATE_NC))
+  {
+    case NC_CON_EST:
+    case NC_DEDICATED:
+    case NC_IDLE:
+      index = nc_get_index (channel);
+      if (index NEQ NOT_PRESENT_16BIT)
+      {
+        for (i = 0; i < alr_data->nc_data.c_ba_arfcn; i++)
+        {
+          if ((i NEQ index) AND (alr_data->nc_data.cell[i].tim_valid NEQ TV_INVALID_TIMING_INFO))
+          {
+            ULONG new_frame_offset;
+            ULONG new_time_align;
+
+            new_frame_offset = (alr_data->nc_data.cell[i].frame_offset -
+                                alr_data->nc_data.cell[index].frame_offset +
+                                TDMA_FRAMES_PER_HYPERFRAME) %
+                               TDMA_FRAMES_PER_HYPERFRAME;
+            if (alr_data->nc_data.cell[i].time_align >= alr_data->nc_data.cell[index].time_align)
+            {
+              new_time_align = alr_data->nc_data.cell[i].time_align -
+                               alr_data->nc_data.cell[index].time_align;
+            }
+            else
+            {
+              new_time_align = 5000 + alr_data->nc_data.cell[i].time_align -
+                               alr_data->nc_data.cell[index].time_align;
+              new_frame_offset = (new_frame_offset + 1) %
+                                 TDMA_FRAMES_PER_HYPERFRAME;
+            } /* time_align */
+            alr_data->nc_data.cell[i].frame_offset = new_frame_offset;
+            alr_data->nc_data.cell[i].time_align = new_time_align;
+          } /* i NEQ index */
+        } /* for(all ncells) */
+
+        ALR_TRACE_NC("set chan to 0");
+
+        alr_data->nc_data.cell[index].frame_offset = 0;
+        alr_data->nc_data.cell[index].time_align = 0;
+      } /* NOT_PRESENT */
+      break;
+    default:
+      TRACE_ERROR("nc_update_list in invalid state");
+      break;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_add_offset              |
++--------------------------------------------------------------------+
+
+  PURPOSE : If the mobile comes back from dedicated mode all synchronized
+            neighbourcells make a status transition to READ_BCCH_RR_NOT_INFORMED.
+            This triggers reading of the neighbourcell BCCH.
+
+*/
+
+GLOBAL void nc_add_offset (void)
+{
+  GET_INSTANCE_DATA;
+  USHORT i;
+  USHORT  c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+
+  for (i = 0; i < c_ba_arfcn; i++)
+  {
+    if (alr_data->nc_data.cell[i].ba_arfcn NEQ alr_data->serving_cell)
+    {
+      /*XXX c_sync should be the same in idle and dedic also for pbcchc
+        so no action here */
+      switch (alr_data->nc_data.cell[i].status)
+      {
+        case FB_SB_SYNC:
+        case READ_SB:
+          nc_set_status (i, READ_BCCH_RR_NOT_INFORMED);
+          break;
+        default:
+          break;
+
+      }
+    }
+    else
+      nc_set_status (i, FB_SB_SYNC);
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_fill_report_sc_dedi     |
++--------------------------------------------------------------------+
+
+  PURPOSE : Fills the serving cell values for a measurement report.
+
+*/
+
+GLOBAL void nc_fill_report_sc_dedi (T_MPH_MEASUREMENT_IND *rr_report,
+                                    UBYTE ncells)
+{
+  GET_INSTANCE_DATA;
+  rr_report->valid = TRUE;
+  rr_report->ncells.no_of_ncells = ncells;
+  rr_report->arfcn = alr_data->serving_cell;
+  rr_report->fn_offset = 103;   /* average of SDCCH/FACCH */
+  rr_report->dtx = alr_data->nc_data.act_dtx;
+  rr_report->rx_lev_full = (UBYTE)alr_data->nc_data.rxlev_full;
+  if (rr_report->rx_lev_full > 63)
+    rr_report->rx_lev_full = 63;
+  rr_report->rx_lev_sub = (UBYTE)alr_data->nc_data.rxlev_sub;
+  if (rr_report->rx_lev_sub > 63)
+    rr_report->rx_lev_sub = 63;
+  rr_report->rx_qual_full = alr_data->nc_data.rxqual_full;
+  rr_report->rx_qual_sub = alr_data->nc_data.rxqual_sub;
+  rr_report->otd = alr_data->nc_data.tav;
+
+  if(ncells EQ 0)
+  {
+    /* 
+     * rxlev of SC BCCH channel is not avail
+     * use approx value (rxlev_sub)
+     */
+    rr_report->bcch_rxlev_of_sc = rr_report->rx_lev_sub;
+  }
+  else
+  {
+    USHORT index = nc_get_index(alr_data->serving_cell);
+    if(index EQ NOT_PRESENT_16BIT)
+    {
+      TRACE_EVENT("Error SC not present in BA list");
+      rr_report->bcch_rxlev_of_sc = rr_report->rx_lev_sub;
+    }
+    else
+    {
+      if((UBYTE) alr_data->nc_data.cell[index].rxlev_average > 63)
+        rr_report->bcch_rxlev_of_sc = 63;
+      else
+        rr_report->bcch_rxlev_of_sc = (UBYTE)alr_data->nc_data.cell[index].rxlev_average;
+    }
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : inform GRR                 |
++--------------------------------------------------------------------+
+
+  PURPOSE : inform GRR
+
+*/
+
+#ifdef GPRS
+LOCAL void nc_inform_grr_of_ncell (USHORT index, UBYTE type)
+{
+  GET_INSTANCE_DATA;
+  PALLOC(rr_rep, MPH_MEASUREMENT_IND);
+  rr_rep->ncells.no_of_ncells = 1;
+  rr_rep->ncells.arfcn[0] = alr_data->nc_data.cell[index].ba_arfcn;
+  if(type EQ GRR_SB_FOUND)
+    rr_rep->ncells.bsic[0]  =  alr_data->nc_data.cell[index].bsic;
+  else
+    rr_rep->ncells.bsic[0]  = type;
+  rr_rep->gprs_sync = SYNC_RESULTS;
+  PSENDX(RR,rr_rep);
+}
+
+LOCAL void remove_ncell_and_inform_grr (USHORT index)
+{
+  nc_inform_grr_of_ncell (index, GRR_SB_UNKNOWN);
+  nc_remove_channel_from_ba_list(index);
+}
+#endif
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_build_rr_report         |
++--------------------------------------------------------------------+
+
+  PURPOSE : Fills a measurement report to RR with neighbour cell
+            information.
+
+*/
+
+LOCAL void nc_build_rr_report (T_MPH_MEASUREMENT_IND *rr_report)
+{
+  GET_INSTANCE_DATA;
+  UBYTE c_report;
+  UBYTE c_ba_list;
+  T_NC * pcell = alr_data->nc_data.cell;
+
+  c_report = 0;
+  rr_report->valid = TRUE;
+
+  for (c_ba_list = 0; c_ba_list < alr_data->nc_data.c_ba_arfcn AND
+       c_report < MAX_RR_NCELL_CNT; c_ba_list++, pcell++)
+  {
+    if(pcell->one_of_six AND pcell->ba_status EQ IN_BA)
+    {
+      switch (pcell->status)
+      {
+        case FB_SB_SYNC_RR_NOT_INFORMED:
+          /*
+           * the cell is synchronized but RR has no prior
+           * knowledge of the cell, but we may have already
+           * read data from the ncell BCCH. This check is performed
+           * after sending the measurement report
+           */
+        case FB_SB_SYNC:
+        case READ_BCCH:
+        case READ_SB:
+        case READ_SB_BCCH:
+          /*
+           * we may be currently reading this SB/FB or BCCH of the cell
+           * pass up this cell also
+           * if READ_FB_SB_PENDING this may be the first time that the
+           * cell is read so check if the bsic of this cell has been
+           * read already
+           */
+        case READ_SB_PENDING:
+        case READ_SB_BCCH_PENDING:
+        case READ_BCCH_PENDING:
+        case READ_FB_SB_PENDING:
+          if (pcell->ba_arfcn NEQ alr_data->serving_cell AND
+              pcell->bsic NEQ NOT_PRESENT_8BIT)
+          {
+            rr_report->ncells.arfcn[c_report] = pcell->ba_arfcn;
+            rr_report->ncells.rx_lev[c_report] = (UBYTE)pcell->rxlev_average;
+  #if defined(_SIMULATION_)
+            TRACE_EVENT_P3 ("rx_lev%u[%u]=%d",
+              c_report, rr_report->ncells.arfcn[c_report],
+              rr_report->ncells.rx_lev[c_report]);
+  #endif  /* _SIMULATION_ */
+            rr_report->ncells.bsic[c_report] = pcell->bsic;
+            rr_report->ncells.time_alignmt[c_report] = pcell->time_align;
+            rr_report->ncells.frame_offset[c_report++] = pcell->frame_offset;
+          }
+          break;
+        case READ_BCCH_RR_NOT_INFORMED:
+        case READ_BCCH_PENDING_RR_NOT_INFORMED:
+        case READ_FB_SB:
+          /* do nothing */
+        default:
+        break;
+      }
+    }/* not one_of_six*/
+  }
+  rr_report->ncells.no_of_ncells = c_report;
+#ifdef FF_PS_RSSI
+  rr_report->rx_qual_full = alr_data->nc_data.rxqual_full;
+#endif
+#if defined (REL99) && defined (TI_PS_FF_EMR)
+  /*Further, if we are reporting 6 strongest and if report type is enhanced.....*/
+  if ( (c_report) AND (alr_data->nc_data.emr_data.rep_type EQ REP_TYPE_ENH) )
+  {
+    /*...add the other cells in BA to the report: this can be used by GRR for P-EMR*/
+    pcell = alr_data->nc_data.cell;
+    for (c_ba_list = c_report; c_ba_list < alr_data->nc_data.c_ba_arfcn AND
+       c_report < MAX_NUM_CELLS_IN_REPORT; c_ba_list++, pcell++)
+    {
+      /*All those which are not in six strongest*/
+      if ( (!pcell->one_of_six) AND pcell->ba_status EQ IN_BA)
+      {
+        if (pcell->ba_arfcn NEQ alr_data->serving_cell AND 
+          pcell->bsic NEQ NOT_PRESENT_8BIT)
+        {
+          rr_report->ncells.arfcn[c_report] = pcell->ba_arfcn;
+          rr_report->ncells.rx_lev[c_report] = (UBYTE)pcell->rxlev_average;
+  #if defined(_SIMULATION_)
+        TRACE_EVENT_P3 ("rx_lev%u[%u]=%d",
+          c_report, rr_report->ncells.arfcn[c_report],
+          rr_report->ncells.rx_lev[c_report]);
+  #endif  /* _SIMULATION_ */
+          rr_report->ncells.bsic[c_report] = pcell->bsic;
+          rr_report->ncells.time_alignmt[c_report] = pcell->time_align;
+          rr_report->ncells.frame_offset[c_report++] = pcell->frame_offset;
+        }
+      }
+    }/*for 'c_report'*/
+    rr_report->ncells.no_of_ncells = c_report;
+  }/*rep_type = REP_TYPE_ENH*/
+#endif
+}
+
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_build_nwctrl_rr_report  |
++--------------------------------------------------------------------+
+
+  PURPOSE : Fills a measurement report to RR with neighbour cell
+            information.
+
+*/
+
+
+#ifdef GPRS
+GLOBAL void nc_build_nwctrl_rr_report (T_MPH_MEAS_REP_CNF *rr_report)
+{
+  GET_INSTANCE_DATA;
+  UBYTE  c_report;
+  UBYTE  c_ba_list;
+  USHORT index;
+  T_NC * pcell;
+
+  /*
+   * Store the rxlev average  for the serving cell
+   */
+  index = nc_get_index(alr_data->serving_cell);
+  if ( index NEQ NOT_PRESENT_16BIT )
+  {
+    pcell = &alr_data->nc_data.cell[index];
+    rr_report->meas_rep[0].arfcn   = alr_data->serving_cell;
+    rr_report->meas_rep[0].bsic    = pcell->bsic;
+
+    if(pcell->c_nc_rxlev)
+    {
+      rr_report->meas_rep[0].rx_lev = pcell->nc_rxlev/pcell->c_nc_rxlev;
+    }
+#if defined(_SIMULATION_)
+    TRACE_EVENT_P3 ("nw_sc__rxlev[%u]=acc : %d, count:%d",rr_report->meas_rep[0].arfcn,pcell->nc_rxlev,pcell->c_nc_rxlev);
+#endif  /* _SIMULATION_ */
+  }
+
+  c_report = 0;
+  pcell = alr_data->nc_data.cell;
+
+  for (c_ba_list = 0; c_ba_list < alr_data->nc_data.c_ba_arfcn AND
+       c_report < MAX_RR_NCELL_CNT; c_ba_list++, pcell++)
+  {
+    if(pcell->one_of_six AND pcell->ba_status EQ IN_BA)
+    {
+      switch (pcell->status)
+      {
+        case FB_SB_SYNC_RR_NOT_INFORMED:
+        /*
+         * the cell is synchronized but RR has no prior
+         * knowledge of the cell, but we may have already
+         * read data from the ncell BCCH. This check is performed
+         * after sending the measurement report
+         */
+        case FB_SB_SYNC:
+        case READ_BCCH:
+        case READ_SB:
+        case READ_SB_BCCH:
+        /*
+         * we may be currently reading this SB/FB or BCCH of the cell
+         * pass up this cell also
+         * if READ_FB_SB_PENDING this may be the first time that the
+         * cell is read so check if the bsic of this cell has been
+         * read already
+         */
+        case READ_SB_PENDING:
+        case READ_SB_BCCH_PENDING:
+        case READ_BCCH_PENDING:
+        case READ_FB_SB_PENDING:
+          if (pcell->ba_arfcn NEQ alr_data->serving_cell AND
+              pcell->bsic NEQ NOT_PRESENT_8BIT)
+          {
+            rr_report->meas_rep[c_report+1].arfcn = pcell->ba_arfcn;
+            rr_report->meas_rep[c_report+1].bsic   = pcell->bsic;
+            if(pcell->c_nc_rxlev)
+            {
+	      rr_report->meas_rep[c_report+1].rx_lev = pcell->nc_rxlev/pcell->c_nc_rxlev;
+            }
+
+#if defined(_SIMULATION_)
+            TRACE_EVENT_P3 ("nwctrl_rxlev%u[%u]=%d",c_report+1, rr_report->meas_rep[c_report+1].arfcn,rr_report->meas_rep[c_report+1].rx_lev);
+#endif  /* _SIMULATION_ */
+            c_report++;
+          }
+          break;
+        case READ_BCCH_RR_NOT_INFORMED:
+        case READ_BCCH_PENDING_RR_NOT_INFORMED:
+        case READ_FB_SB:
+          /* do nothing */
+        default:
+          break;
+      }
+    }/* not one_of_six*/
+  }
+
+  if( (c_report + 1 )  < RR_ALR_MEAS_REPORT_SIZE )
+  {
+    rr_report->meas_rep[c_report+1].arfcn  = NOT_PRESENT_16BIT ;
+    rr_report->meas_rep[c_report+1].rx_lev = NOT_PRESENT_8BIT ;
+    rr_report->meas_rep[c_report+1].bsic   = NOT_PRESENT_8BIT ;
+  }
+}
+#endif /* ifdef GPRS */
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_store_tav               |
++--------------------------------------------------------------------+
+
+  PURPOSE : Stores timing advance receveived with dedicated mode SI's
+*/
+GLOBAL void nc_store_tav(USHORT tav)
+{
+  GET_INSTANCE_DATA;
+  alr_data->nc_data.tav = tav;
+}
+
+
+/*
+ *========================================================================
+ * Helper Functions
+ *========================================================================
+ */
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_check_status            |
++--------------------------------------------------------------------+
+
+  PURPOSE : Checks the status of the neighbour cells.
+*/
+
+LOCAL void nc_check_status (UBYTE start_list)
+{
+  GET_INSTANCE_DATA;
+  USHORT i;
+  USHORT c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+  T_NC * pcell = alr_data->nc_data.cell;
+
+  for (i = 0; i < c_ba_arfcn; i++, pcell++)
+  {
+    if (pcell->ba_arfcn NEQ alr_data->serving_cell)
+    {
+      switch (GET_STATE(STATE_NC))
+      {
+        case NC_DEDICATED:
+          switch (pcell->status)
+          {
+            case INACTIVE:
+              break;
+            case IDLE:
+              if (pcell->one_of_twelve)
+                nc_set_status (i, READ_FB_SB);
+              if (start_list EQ CHECK_FOR_CONFIRM)
+              {
+                if (pcell->tim_valid EQ TV_VALID_TIMING_INFO)
+                  pcell->tim_valid = TV_APPROX_TIMING_INFO;
+                else if (pcell->tim_valid EQ TV_APPROX_TIMING_INFO)
+                  pcell->tim_valid = TV_INVALID_TIMING_INFO;
+              }
+              break;
+            case READ_FB_SB:
+              if (pcell->one_of_twelve EQ FALSE)
+              {
+                nc_set_status (i, IDLE);
+                if (start_list EQ CHECK_FOR_CONFIRM AND pcell->tim_valid EQ TV_APPROX_TIMING_INFO)
+                  pcell->tim_valid = TV_INVALID_TIMING_INFO;
+              }
+              break;
+            case FB_SB_SYNC:
+              if (pcell->one_of_twelve EQ FALSE)
+              {
+                nc_set_status (i, IDLE_SYNC);
+              }
+              else
+              {
+                if ( (start_list) AND (alr_data->nc_data.c_sync_intrupted EQ FALSE))
+                  nc_set_status (i, READ_SB);
+              }
+              break;
+            case IDLE_SYNC:
+              if (pcell->one_of_twelve)
+              {
+                if (pcell->c_sync EQ 0)
+                  nc_set_status (i, READ_FB_SB);
+                else
+                  nc_set_status (i, FB_SB_SYNC);
+              }
+              else
+              {
+                if (pcell->c_sync EQ 0)
+                {
+                  nc_set_status (i, IDLE);
+                }
+              }
+              break;
+            case READ_SB:
+              if (pcell->one_of_twelve EQ FALSE)
+              {
+                pcell->tim_valid = TV_APPROX_TIMING_INFO;
+                nc_set_status (i, IDLE);
+              }
+              break;
+            case READ_BCCH_RR_NOT_INFORMED:
+            case READ_BCCH:
+            case READ_SB_BCCH:
+              TRACE_EVENT("unexpected STATE_NC during NC_DEDICATED");
+              if (pcell->one_of_twelve)
+                nc_set_status (i, READ_FB_SB);
+              else
+              {
+                pcell->tim_valid = TV_APPROX_TIMING_INFO;
+                nc_set_status (i, IDLE);
+              }
+              break;
+
+            case FB_SB_FAILED:
+              if (pcell->one_of_twelve EQ FALSE)
+                nc_set_status (i, IDLE);
+              else if (pcell->c_sync EQ 0)
+                nc_set_status (i, READ_FB_SB);
+              break;
+
+            default:
+              break;
+          }
+          break;
+        case NC_IDLE:
+          switch (pcell->status)
+          {
+            case INACTIVE:
+              break;
+            case IDLE:
+              if (pcell->one_of_twelve)
+						//Nina modify to avoid frequent NSY_R
+
+#if 0
+                nc_set_status (i, READ_FB_SB);
+
+#else
+if(pcell->rank_of_the_six < 2)
+							{
+                nc_set_status (i, READ_FB_SB);
+							}
+						else
+							{
+							pcell->one_of_six = 0;
+							pcell->one_of_twelve =0;
+							}
+						#endif
+              if (start_list EQ CHECK_FOR_CONFIRM)
+              {
+                if (pcell->tim_valid EQ TV_VALID_TIMING_INFO)
+                  pcell->tim_valid = TV_APPROX_TIMING_INFO;
+                else if (pcell->tim_valid EQ TV_APPROX_TIMING_INFO)
+                  pcell->tim_valid = TV_INVALID_TIMING_INFO;
+              }
+              break;
+            case READ_FB_SB:
+              if (pcell->one_of_twelve EQ FALSE)
+              {
+                nc_set_status (i, IDLE);
+                if (start_list EQ CHECK_FOR_CONFIRM AND pcell->tim_valid EQ TV_APPROX_TIMING_INFO)
+                  pcell->tim_valid = TV_INVALID_TIMING_INFO;
+              }
+              break;
+            case FB_SB_SYNC:
+              if (pcell->one_of_twelve EQ FALSE)
+              {
+                nc_set_status (i, IDLE_SYNC);
+              }
+              else
+              {
+                if (start_list)
+                  nc_set_status (i, READ_SB);
+                if (pcell->one_of_six AND
+                    pcell->c_bcch EQ 0)
+                  nc_set_status (i, READ_SB_BCCH);
+              }
+              break;
+            case FB_SB_SYNC_RR_NOT_INFORMED:
+              if (pcell->one_of_six EQ FALSE)
+              {
+                if (pcell->one_of_twelve EQ FALSE)
+                {
+                  nc_set_status (i, IDLE_SYNC);
+                }
+                else
+                {
+                  nc_set_status (i, FB_SB_SYNC);
+                }
+              }
+              break;
+            case FB_SB_FAILED:
+				//Nina add to judge the syn failure times
+			if(pcell->syn_failure_times > 2)
+			{
+				nc_set_status (i, EXCLUDED);
+				break;
+ 
+			}
+              if (pcell->one_of_twelve EQ FALSE)
+                nc_set_status (i, IDLE);
+              else if (pcell->c_sync EQ 0)
+              	{
+              	if(pcell->rank_of_the_six < 4)
+              		{
+				nc_set_status (i, READ_FB_SB);
+              		}
+				else
+					{
+							pcell->one_of_six = 0;
+							pcell->one_of_twelve =0;
+
+					}
+              }
+              break;
+            case IDLE_SYNC:
+              if (pcell->one_of_twelve)
+              {
+                if(pcell->one_of_six)
+                {
+                  if (pcell->c_sync EQ 0)
+                    nc_set_status (i, READ_FB_SB);
+                  else
+                    nc_set_status (i, READ_BCCH_RR_NOT_INFORMED);
+                }
+                else
+                {
+                  if (pcell->c_sync EQ 0)
+                    nc_set_status (i, READ_FB_SB);
+                  else
+                    nc_set_status (i, FB_SB_SYNC);
+                }
+              }
+              else
+              {
+                if (pcell->c_sync EQ 0)
+                {
+                  pcell->tim_valid = TV_APPROX_TIMING_INFO;
+                  nc_set_status (i, IDLE);
+                }
+              }
+              break;
+            case READ_SB:
+              if (pcell->one_of_twelve EQ FALSE)
+              {
+                pcell->tim_valid = TV_APPROX_TIMING_INFO;
+                nc_set_status (i, IDLE);
+              }
+              else
+              {
+                if (pcell->c_bcch EQ 0)
+                  nc_set_status (i, READ_SB_BCCH);
+              }
+              break;
+            case READ_BCCH:
+              if (pcell->one_of_six EQ FALSE)
+              {
+                if (pcell->one_of_twelve EQ FALSE)
+                {
+                  nc_set_status (i, IDLE_SYNC);
+                }
+                else
+                {
+                  nc_set_status (i, FB_SB_SYNC);
+                }
+              }
+              break;
+            case READ_BCCH_RR_NOT_INFORMED:
+              if (pcell->one_of_six EQ FALSE)
+              {
+                if (pcell->one_of_twelve EQ FALSE)
+                {
+                  nc_set_status (i, IDLE_SYNC);
+                }
+                else
+                {
+                  nc_set_status (i, FB_SB_SYNC);
+                }
+              }
+              break;
+
+            case READ_SB_BCCH:
+              if (pcell->one_of_six EQ FALSE)
+              {
+                if (pcell->one_of_twelve)
+                  nc_set_status(i, READ_SB);
+                else
+                {
+                  pcell->tim_valid = TV_APPROX_TIMING_INFO;
+                  nc_set_status (i, IDLE);
+                }
+              }
+              break;
+
+            default:
+              break;
+          }
+          break;
+#ifdef GPRS
+        case NC_PIM_PBCCH:
+        case NC_PTM_PBCCH: /*XXX*/
+        case NC_CON_EST: /*in case of an updated list in CON_EST */
+          switch (pcell->status)
+          {
+            case IDLE:
+              if(pcell->one_of_twelve)
+                nc_set_status (i, READ_FB_SB);
+              if (start_list EQ CHECK_FOR_CONFIRM)
+              {
+                if (pcell->tim_valid EQ TV_VALID_TIMING_INFO)
+                  pcell->tim_valid = TV_APPROX_TIMING_INFO;
+                else if (pcell->tim_valid EQ TV_APPROX_TIMING_INFO)
+                  pcell->tim_valid = TV_INVALID_TIMING_INFO;
+              }
+              break;
+            case FB_SB_SYNC:
+              if(pcell->one_of_twelve EQ FALSE)
+                nc_set_status (i, IDLE_SYNC);
+              else
+              {
+                if (start_list)
+                  nc_set_status (i, READ_SB);
+              }
+              break;
+            case FB_SB_FAILED:
+              if(pcell->one_of_twelve EQ FALSE)
+                remove_ncell_and_inform_grr(i);
+              else
+                if(pcell->c_sync EQ 0)
+                  nc_set_status (i, READ_FB_SB);
+              break;
+            case READ_FB_SB:
+              break;
+            case READ_SB:
+              if (pcell->one_of_twelve EQ FALSE)
+              {
+                pcell->tim_valid = TV_APPROX_TIMING_INFO;
+                nc_set_status (i, IDLE);
+              }
+              break;
+            case IDLE_SYNC:
+              if(pcell->c_sync EQ 0)
+                remove_ncell_and_inform_grr(i);
+              else
+              {
+                if(pcell->one_of_twelve)
+                  nc_set_status (i, FB_SB_SYNC);
+              }
+              break;
+            case READ_BCCH_RR_NOT_INFORMED:
+            case READ_BCCH:
+            case FB_SB_SYNC_RR_NOT_INFORMED:
+              if (pcell->one_of_twelve EQ FALSE)
+              {
+                nc_set_status (i, IDLE_SYNC);
+              }
+              break;
+            default:
+              TRACE_EVENT_P4("wrong state in check_st: i%d a%d 1o6%d st%d", i,
+                               pcell->ba_arfcn,
+                               pcell->one_of_six,
+                               pcell->status);
+              break;
+          }
+          break;
+#endif
+        default:
+          break;
+      }/*switch state*/
+    } /*if*/
+  } /*for*/
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_build_rr_report_dedi    |
++--------------------------------------------------------------------+
+
+  PURPOSE : Fills a measurement report to RR with neighbour cell
+            information in dedicated mode.
+            In dedicated mode the serving cell may be included.
+
+*/
+LOCAL void nc_build_rr_report_dedi (T_MPH_MEASUREMENT_IND *rr_report)
+{
+  GET_INSTANCE_DATA;
+  UBYTE c_report = 0;
+  UBYTE c_ba_list;
+  UBYTE found = TRUE;
+  UBYTE index;
+  UBYTE i;
+  UBYTE in_report[34];
+  T_NC * pcell1;
+
+  memset (in_report, 0, 34);
+
+#if defined (REL99) && defined (TI_PS_FF_EMR)
+  if (alr_data->nc_data.emr_data.rep_type EQ REP_TYPE_ENH )
+  {    
+    nc_fill_ncell_enh_meas_results(rr_report);
+    nc_fill_serv_cell_enh_meas_results(rr_report);
+    return;
+  }
+#endif
+
+  for ( i = 0; i < 6 AND found EQ TRUE; i++)
+  {
+    found = FALSE;
+    index = NOT_PRESENT_8BIT;
+    pcell1 = alr_data->nc_data.cell;
+
+    for (c_ba_list = 0; c_ba_list < alr_data->nc_data.c_ba_arfcn; c_ba_list++, pcell1++)
+    {
+      if (in_report[c_ba_list] EQ FALSE AND pcell1->ba_status EQ IN_BA)
+      {
+        switch (pcell1->status)
+        {
+          case FB_SB_SYNC:
+          case READ_SB:
+          case READ_SB_PENDING:
+            if (nc_ncell_in_plmn_permitted(pcell1->bsic))
+            {
+              if ((pcell1->ba_arfcn NEQ alr_data->serving_cell AND
+                   pcell1->one_of_six) OR
+                  (pcell1->ba_arfcn EQ alr_data->serving_cell AND
+                   alr_data->nc_data.sc_included))
+              {
+                if (index EQ NOT_PRESENT_8BIT)
+                  index = c_ba_list;
+                else
+                {
+                 if (pcell1->rxlev_average >
+                     alr_data->nc_data.cell[index].rxlev_average)
+                   index = c_ba_list;
+                }
+              }
+            }
+          break;
+        }
+      }
+    }
+
+    if (index NEQ NOT_PRESENT_8BIT)
+    {
+      T_NC* pcell = &alr_data->nc_data.cell[index];
+      found = TRUE;
+      in_report[index] = TRUE;
+
+      rr_report->ncells.arfcn[c_report] = pcell->ba_arfcn;
+
+      if ((UBYTE)pcell->rxlev_average > 63)
+        rr_report->ncells.rx_lev[c_report] = 63;
+      else
+        rr_report->ncells.rx_lev[c_report] = (UBYTE)pcell->rxlev_average;
+
+      rr_report->ncells.bsic[c_report] = pcell->bsic;
+      rr_report->ncells.time_alignmt[c_report] = pcell->time_align;
+      rr_report->ncells.frame_offset[c_report++] = pcell->frame_offset;
+    }
+
+  } /*for (up to 6 ncells)*/
+  /*
+   * insert serving cell values
+   */
+  nc_fill_report_sc_dedi (rr_report, c_report);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_rank_ncells             |
++--------------------------------------------------------------------+
+
+  PURPOSE : Searches for the six and additionally the twelve strongest neighbourcells.
+
+*/
+LOCAL void nc_rank_ncells (void)
+{
+  GET_INSTANCE_DATA;
+  USHORT  c_found, i;
+  USHORT  last = (sizeof alr_data->nc_data.cell /
+                  sizeof alr_data->nc_data.cell[0]);
+  UBYTE   old_1of6[ sizeof alr_data->nc_data.cell /
+                    sizeof alr_data->nc_data.cell[0] ];
+  UBYTE num_1of6, hyst_rxlev, nc_conf_active = FALSE;
+
+  num_1of6   = 0;
+  hyst_rxlev = 63;
+  alr_data->nc_data.new_strong_cell_detect = FALSE;
+
+  for ( i = 0; i < last; i++ )
+  {
+    old_1of6[i] = alr_data->nc_data.cell[i].one_of_six;
+    alr_data->nc_data.cell[i].new_strong_cell = FALSE;
+
+    if(old_1of6[i])
+    {
+      num_1of6++;
+
+      if(alr_data->nc_data.cell[i].rxlev_average < hyst_rxlev)
+        hyst_rxlev = alr_data->nc_data.cell[i].rxlev_average;
+    }
+
+	alr_data->nc_data.cell[i].one_of_six = FALSE;
+
+  }
+
+  if(num_1of6 < MAX_RR_NCELL_CNT)
+     hyst_rxlev = 0;
+
+  if((GET_STATE(STATE_NC_PROC) EQ NC_CONFIRM) AND
+     (GET_STATE(STATE_NC) EQ NC_DEDICATED) AND 
+     (!alr_data->nc_data.eotd_avail))
+    nc_conf_active = TRUE;
+
+  c_found = 0;
+
+  if ((std EQ STD_DUAL) OR (std EQ STD_DUAL_EGSM) OR (std EQ STD_DUAL_US)
+#ifdef TI_PS_FF_QUAD_BAND_SUPPORT
+    OR (std EQ STD_850_1800) OR (std EQ STD_900_1900) OR (std EQ STD_850_900_1800) OR (std EQ STD_850_900_1900)
+#endif
+    )
+  {
+    switch (alr_data->nc_data.multiband)
+    {
+      case MULTI_BAND_0:
+        /* Find 6 cells from any band */
+        nc_find_cells (&c_found, MAX_RR_NCELL_CNT, NO_BAND_LIMITATION, ALR_RXLEV_AVERAGE_MIN);
+        break;
+      case MULTI_BAND_1:
+        /* Find 1 cell from bands other than Serving cell band */
+        nc_find_cells (&c_found, 1, EXCLUDE_SC_BAND, ALR_RXLEV_AVERAGE_LWR_THR);
+
+        /* Find 5 cells from the Serving cell band */
+        nc_find_cells (&c_found, MAX_RR_NCELL_CNT-1, ONLY_SC_BAND, ALR_RXLEV_AVERAGE_LWR_THR);
+
+        /* If number of found cells are less than six, find the remaining from any band.
+         * Also relax the Rxlev criteria
+         */
+        nc_find_cells (&c_found, (USHORT)(MAX_RR_NCELL_CNT - c_found), NO_BAND_LIMITATION,
+          ALR_RXLEV_AVERAGE_MIN);
+        break;
+      case MULTI_BAND_2:
+        /* Find 2 cell from bands other than Serving cell band */
+        nc_find_cells (&c_found, 2, EXCLUDE_SC_BAND, ALR_RXLEV_AVERAGE_LWR_THR);
+
+        /* Find 4 cells from the Serving cell band */
+        nc_find_cells (&c_found, MAX_RR_NCELL_CNT-2, ONLY_SC_BAND, ALR_RXLEV_AVERAGE_LWR_THR);
+
+        /* If number of found cells are less than six, find the remaining from any band.
+         * Also relax the Rxlev criteria
+         */
+        nc_find_cells (&c_found, (USHORT)(MAX_RR_NCELL_CNT - c_found), NO_BAND_LIMITATION,
+          ALR_RXLEV_AVERAGE_MIN);
+        break;
+      case MULTI_BAND_3:
+        /* Find 3 cell from bands other than Serving cell band */
+        nc_find_cells (&c_found, 3, EXCLUDE_SC_BAND, ALR_RXLEV_AVERAGE_LWR_THR);
+
+        /* Find 3 cells from the Serving cell band */
+        nc_find_cells (&c_found, MAX_RR_NCELL_CNT-3, ONLY_SC_BAND, ALR_RXLEV_AVERAGE_LWR_THR);
+
+        /* If number of found cells are less than six, find the remaining from any band.
+         * Also relax the Rxlev criteria
+         */
+        nc_find_cells (&c_found, (USHORT)(MAX_RR_NCELL_CNT - c_found), NO_BAND_LIMITATION,
+          ALR_RXLEV_AVERAGE_MIN);
+        break;
+    }
+  }
+  else
+    nc_find_cells (&c_found, MAX_RR_NCELL_CNT, NO_BAND_LIMITATION, ALR_RXLEV_AVERAGE_MIN);
+
+  for ( i = 0; i < last; i++ )
+  {
+    if (alr_data->nc_data.cell[i].one_of_six AND !old_1of6[i] AND
+        GET_STATE(STATE_NC) NEQ NC_DEDICATED)
+    { /* the cell becomes one of six */
+      switch (alr_data->nc_data.cell[i].status)
+      {
+        case FB_SB_SYNC:
+          /* the cell is treaded as synchronized, perform BCCH reading ASAP */
+          nc_set_status(i, READ_BCCH_RR_NOT_INFORMED);
+          break;
+        case READ_SB:
+        case IDLE_SYNC:
+        case FB_SB_FAILED:
+          /* the cell shall be synchronized ASAP, then BCCH info is to send to RR */
+          nc_set_status(i, READ_FB_SB);
+          break;
+        case READ_SB_PENDING:
+          /* after receipt of sync ind the BCCH is to read and to send to RR */
+          nc_set_status(i, READ_FB_SB_PENDING);
+          break;
+        default:
+          break;
+      }
+    }
+    if (old_1of6[i] AND
+        !alr_data->nc_data.cell[i].one_of_six AND
+        alr_data->nc_data.cell[i].status EQ FB_SB_SYNC)
+      alr_data->nc_data.cell[i].c_attempt = 0;
+
+    /* Check the new strong cell criteria when confirmation is active */
+    if(nc_conf_active)
+    {
+      nc_check_new_strong_cell(i, old_1of6[i], hyst_rxlev);
+
+    }
+  }
+
+  nc_find_list_cells();
+
+  TRACE_EVENT_P1("New strong cell detect:%d", 
+                  alr_data->nc_data.new_strong_cell_detect);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_find_cells              |
++--------------------------------------------------------------------+
+
+  PURPOSE : Searches for the six strongest neighbourcells,
+            using multiband parameter if needed.
+            For Quad Band MS called only in case of the value of 'std' is set to
+            STD_DUAL, STD_DUAL_EGSM, STD_DUAL_US, STD_850_1800, STD_900_1900,
+            STD_850_900_1800 or STD_850_900_1900. 
+            For Dual Band MS called only in case of the value of 'std' is set to
+            STD_DUAL, STD_DUAL_EGSM or STD_DUAL_US.
+
+*/
+LOCAL void nc_find_cells (USHORT *c_found, USHORT max, UBYTE limitation,
+                          UBYTE min_rxlev)
+{
+  GET_INSTANCE_DATA;
+  int     i, j;
+  BOOL    limit;
+  int     index;
+
+UBYTE      rank = 0;
+
+  USHORT  c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+  T_NC*   pcell;
+  UBYTE   band_nc;
+  UBYTE   band_sc = get_band (alr_data->serving_cell);
+
+  if (*c_found >= MAX_RR_NCELL_CNT)
+    return;
+
+  if (band_sc EQ BAND_E_GSM)
+    band_sc = BAND_GSM_900; /* equal treatment of E-GSM and GSM900 */
+
+  for (j = 0, index = 0; (j < max) AND (index NEQ NOT_PRESENT_16BIT); j++)
+  {
+    index = NOT_PRESENT_16BIT;
+
+    for (i = 0; i < c_ba_arfcn; i++)
+    {
+      pcell = &alr_data->nc_data.cell[i];
+      /*
+       * The six strongest neighbour cells do not include cells
+       * currently not belonging to BA list
+       */
+      if (pcell->ba_status NEQ IN_BA)
+        continue;
+
+      switch (pcell->status)
+      {
+        case INACTIVE:
+        case EXCLUDED:
+          /*
+           * The six strongest neighbour cells do not include failed ncells.
+           */
+          break;
+        default:
+          if (pcell->ba_arfcn NEQ alr_data->serving_cell AND
+              pcell->one_of_six EQ FALSE AND
+              pcell->rxlev_average > min_rxlev)  /* > -106 dBm */
+          {
+            band_nc = get_band (pcell->ba_arfcn);
+            if (band_nc EQ BAND_E_GSM)
+              band_nc = BAND_GSM_900; /* equal treatment of E-GSM and GSM900 */
+
+            switch (limitation)
+            {
+              default:
+              case NO_BAND_LIMITATION:
+                limit = FALSE;
+                break;
+              case EXCLUDE_SC_BAND:
+                limit = (band_sc EQ band_nc);
+                break;
+              case ONLY_SC_BAND:
+                limit = (band_sc NEQ band_nc);
+                break;
+            }
+
+            if (!limit)
+            {
+              if (index EQ NOT_PRESENT_16BIT)
+              {
+                index = i;
+              }
+              else
+              {
+                if (pcell->rxlev_average >
+                    alr_data->nc_data.cell[index].rxlev_average)
+                {
+                  index = i;
+                }
+              }
+            }
+          }
+          break;
+      } /*ncell status*/
+    }
+
+    if (index NEQ NOT_PRESENT_16BIT)
+    {
+      alr_data->nc_data.cell[index].one_of_six = TRUE;
+	  alr_data->nc_data.cell[index].rank_of_the_six = rank;
+	  rank++;
+      (*c_found)++;
+    }
+  }
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_find_list_cells         |
++--------------------------------------------------------------------+
+
+  PURPOSE : Searches for the 6 or 12 strongest neighbourcells
+
+*/
+LOCAL void nc_find_list_cells (void)
+{
+  GET_INSTANCE_DATA;
+  USHORT  i, j;
+  UBYTE   found, c_found = 0;
+  USHORT  index;
+  USHORT  c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+  T_NC*   pcell;
+
+  for (i = 0, pcell = &alr_data->nc_data.cell[0]; i < c_ba_arfcn; i++, pcell++ )
+  {
+    if ((pcell->one_of_twelve = pcell->one_of_six) EQ TRUE)
+      c_found++;
+  }
+  /*
+   * The flag one_of_six controls the property to include a neighbour cell
+   * into the measurement report,
+   * the flag one_of_twelve controls whether the ncell is included into the
+   * synchronisation confirmation process. In case of EOTD up to 12 cell are 
+   * included, in case of non-EOTD 6 cells are sufficient.
+   */
+#if defined (REL99) && defined (TI_PS_FF_EMR)
+  if ( (!alr_data->nc_data.eotd_avail) AND
+       (alr_data->nc_data.emr_data.rep_type NEQ REP_TYPE_ENH) )
+#else
+  if (!alr_data->nc_data.eotd_avail)
+#endif
+    return;
+
+  for (j = c_found, found = TRUE; (j < MAX_L1_SYNC_CNT) AND (found EQ TRUE); j++)
+  {
+    index = NOT_PRESENT_16BIT;
+    found = FALSE;
+
+    for (i = 0; i < c_ba_arfcn; i++)
+    {
+      pcell = &alr_data->nc_data.cell[i];
+      /*
+       * The 12 strongest neighbour cells do not include ncells currently not belonging to BA list.
+       */
+      if (pcell->ba_status NEQ IN_BA)
+        continue;
+
+      switch (pcell->status)
+      {
+        case INACTIVE:
+        case EXCLUDED:
+          /*
+           * The 12 strongest neighbour cells do not include failed ncells.
+           */
+          break;
+        default:
+          if (pcell->ba_arfcn NEQ alr_data->serving_cell AND
+              pcell->one_of_twelve EQ FALSE AND
+              pcell->rxlev_average > ALR_RXLEV_AVERAGE_MIN)  /* > -110 dBm */
+          {
+            if (index EQ NOT_PRESENT_16BIT)
+            {
+              index = i;
+              found = TRUE;
+            }
+            else
+            {
+              if (pcell->rxlev_average >
+                  alr_data->nc_data.cell[index].rxlev_average)
+              {
+                index = i;
+                found = TRUE;
+              }
+            }
+          }
+          break;
+      } /*ncell status*/
+    }
+
+    if (found AND (index NEQ NOT_PRESENT_16BIT))
+      alr_data->nc_data.cell[index].one_of_twelve = TRUE;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_store_rxlev             |
++--------------------------------------------------------------------+
+
+  PURPOSE : Stores the fieldstrength values of the neighbour cells.
+            Calculates the average of the fieldstrength after five
+            samples.
+
+*/
+
+
+LOCAL void nc_store_rxlev (T_MPHC_RXLEV_PERIODIC_IND *report)
+{
+  GET_INSTANCE_DATA;
+  USHORT  i;
+  USHORT  index;
+  UBYTE   diff;
+  int     max_attempt;
+  T_NC*   pcell;
+
+  ALR_TRACE_NC("store rxlev");
+  /*
+   * Patch for 20.5
+   * The fieldstrength average for a new channel
+   * increases too slow if more then eight channels
+   * are in the neighbourcell list, because layer 1
+   * sends not raw data every paging period.
+   */
+  if (test_house AND
+      alr_data->nc_data.c_ba_arfcn > 8)
+    max_attempt = 3;
+  else
+    max_attempt = 5;
+
+  if (alr_data->nc_data.tim_state NEQ NC_TIM_STOPPED)
+  {
+    /* Decrement the 10sec timer counter variable by BS_PA_MFRMS */
+    alr_data->nc_data.c_ncsync_tim = (UBYTE)(alr_data->nc_data.c_ncsync_tim - alr_data->bs_pa_mfrms - 2);
+  
+    if ((signed char)(alr_data->nc_data.c_ncsync_tim) < 0)
+      alr_data->nc_data.c_ncsync_tim = 0;
+
+    if( alr_data->nc_data.c_ncsync_tim EQ 0 )
+      nc_ncsync_tim_expiry();         /* 10 sec have elapsed. Perform all requisite tasks */
+  }
+
+  /* serving cell rxlev storage */
+  index = nc_get_index (alr_data->serving_cell);
+  pcell = &alr_data->nc_data.cell[index];
+
+  if ( (signed char)report->s_rxlev < 0)
+    report->s_rxlev = 0;
+
+  if (pcell->c_rxlev EQ NOT_PRESENT_8BIT)
+  {
+    pcell->c_rxlev = 0;
+    memset (pcell->rxlev, report->s_rxlev, 5);
+  }
+  else
+  {
+    pcell->rxlev[pcell->c_rxlev++] = report->s_rxlev;
+  }
+  pcell->c_rxlev %= 5;
+
+  /*
+   * store the results seperately for averaging when NC=1 or NC=2
+   */
+#ifdef GPRS
+  if(alr_data->nwctrl_meas_active)
+  {
+    pcell->nc_rxlev += report->s_rxlev;
+    pcell->c_nc_rxlev++;
+  }
+#endif
+
+  /*
+   * ncell rxlev storage
+   */
+  for (i = 0; i < report->nbr_of_carriers; i++)
+  {
+    /*
+     * The RX level from TI is signed in the SAP
+     * we define it as unsigned
+     */
+    if ((signed char) (report->result[i].rxlev) < 0)
+    {
+      report->result[i].rxlev = 0;
+    }
+
+    index = nc_get_index (ARFCN_TO_G23(report->result[i].radio_freq));
+    if (index NEQ NOT_PRESENT_16BIT AND
+        index NEQ LAST_BSIC_REQ AND
+        ARFCN_TO_G23(report->result[i].radio_freq) NEQ alr_data->serving_cell)
+    {
+      int     temp;
+      UBYTE   rxlev = report->result[i].rxlev;
+      pcell = &alr_data->nc_data.cell[index];
+
+      if (pcell->c_rxlev EQ NOT_PRESENT_8BIT)
+      {
+        /*
+         * if it is a new cell, build an average from the first value
+         * to speed up fb sb read
+         */
+        pcell->rxlev[0] = rxlev;
+        pcell->rxlev[1] = rxlev;
+        pcell->rxlev[2] = rxlev;
+        pcell->rxlev[3] = rxlev;
+        pcell->rxlev[4] = rxlev;
+        pcell->c_rxlev = 0;
+      }
+      else
+      {
+        pcell->rxlev[pcell->c_rxlev++] = rxlev;
+        if (pcell->c_rxlev >= (UBYTE)max_attempt)
+          pcell->c_rxlev = 0;
+      }
+      temp =  pcell->rxlev[0] +
+              pcell->rxlev[1] +
+              pcell->rxlev[2];
+
+      if (max_attempt EQ 5)
+      {
+        temp += pcell->rxlev[3] +
+                pcell->rxlev[4];
+      }
+
+      pcell->rxlev_average = (UBYTE)(temp / max_attempt);
+      /*
+      * store the results seperately for averaging when NC=1 or NC=2
+      */
+#ifdef GPRS
+      if(alr_data->nwctrl_meas_active)
+      {
+        pcell->nc_rxlev += rxlev;
+        pcell->c_nc_rxlev++;
+      }
+#endif
+
+
+#if defined(TRACING)
+      TRACE_EVENT_P4("NC%u[%d] rx=%d av=%d",
+        index,
+        pcell->ba_arfcn EQ NOT_PRESENT_16BIT ? -1 : pcell->ba_arfcn&ARFCN_MASK,
+        report->result[i].rxlev, pcell->rxlev_average);
+#endif  /* TRACING */
+
+      switch (pcell->status)
+      {
+        case INACTIVE:
+          nc_set_status (index, IDLE);
+          break;
+        case EXCLUDED:
+          diff = (UBYTE)(pcell->rxlev_average - pcell->last_rxlev);
+          if (diff < 128 AND diff >= 6)
+          {
+            /*
+             * result is positive and more than 6 dBm
+             */
+            nc_set_status (index, IDLE);
+          }
+          break;
+        default:
+          break;
+      }
+    }
+  }
+#ifdef FF_PS_RSSI
+  alr_data->nc_data.rxqual_full =
+    nc_convert_quality ((USHORT)report->qual_acc_idle,
+                        (USHORT)report->qual_nbr_meas_idle);
+#endif
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_find_serving_cell_entry |
++--------------------------------------------------------------------+
+
+  PURPOSE : Finds an entry for serving cell
+            in the BCCH allocation list.
+
+*/
+GLOBAL USHORT nc_find_serving_cell_entry (USHORT serving_cell)
+{
+  GET_INSTANCE_DATA;
+  T_NC*   pcell;
+  USHORT  i;
+  UBYTE   last_alr = alr_data->nc_data.c_ba_arfcn;
+
+  if (last_alr < LAST_BSIC_REQ)
+  {
+    pcell = &alr_data->nc_data.cell[last_alr];
+#if defined(TRACING)
+    TRACE_EVENT_P2 ("NC%u[%u] add", last_alr, serving_cell);
+#endif  /* TRACING */
+    alr_data->nc_data.c_ba_arfcn = last_alr+1;  /* store new last index */
+    i = last_alr;
+    ALR_TRACE_ALL_NC ();
+  }
+  else
+  { /* ALR list is full, search for an entry not in state IN_BA */
+    for (i = 0, pcell = alr_data->nc_data.cell; i < LAST_BSIC_REQ; i++, pcell++)
+    {
+      if (pcell->ba_status NEQ IN_BA)
+        break;
+    } /* for (i...) */
+    if (i >= LAST_BSIC_REQ)
+    { /*
+       * no entry found
+       * reuse the last entry to make sure there is a place for serving cell
+       */
+      i = LAST_BSIC_REQ-1;
+      pcell = &alr_data->nc_data.cell[i];
+    }
+
+    nc_stop_if_active(i);
+#if defined(TRACING)
+    TRACE_EVENT_P2 ("NC%u[%u] replace", i, serving_cell);
+#endif  /* TRACING */
+  }
+  nc_set_status (i, FB_SB_SYNC);
+  pcell->ba_status = IN_BA;    /* even if not in the BA but other functions need it */
+  pcell->ba_arfcn  = serving_cell;
+  return i;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_add_serving_cell_ba_list|
++--------------------------------------------------------------------+
+
+  PURPOSE : Adds serving cell to neighbourcell list.
+            This function is called just before nc_start_reselect
+            and not after the MPHC_NEW_SCELL_CNF.
+
+*/
+LOCAL void nc_add_serving_cell_ba_list (USHORT serving_cell)
+{
+  GET_INSTANCE_DATA;
+  USHORT  index = nc_get_index (serving_cell);
+  T_NC*   pcell;
+
+  /*
+   * Add serving cell if not included
+   */
+  switch (index)
+  {
+    case NOT_PRESENT_16BIT:
+    case LAST_BSIC_REQ:
+      /* serving cell isn´t inside the BA list */
+      index = nc_find_serving_cell_entry(serving_cell);
+      pcell = &alr_data->nc_data.cell[index];
+      pcell->bsic               = alr_data->nc_data.cr_cell.bsic;
+      pcell->frame_offset       = alr_data->nc_data.cr_cell.frame_offset;
+      pcell->time_align         = alr_data->nc_data.cr_cell.time_align;
+      break;
+
+    default:
+      if (index < ELEMENTS(alr_data->nc_data.cell))
+      {
+        /* serving cell is already included in ba list */
+        /* For GPRS the scell may not be in FB_SB_SYNC so put it there */
+        pcell = &alr_data->nc_data.cell[index];
+  
+        /* Check whether the cell has valid sync info */
+        if (pcell->bsic NEQ NOT_PRESENT_8BIT)
+        {
+          nc_set_status(index, FB_SB_SYNC);
+          alr_data->nc_data.cell[index].one_of_six = FALSE;
+          alr_data->nc_data.cell[index].ba_status  = IN_BA; /* even if not in the BA but other functions need it */
+        }
+      }
+      break;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_update_ba_list          |
++--------------------------------------------------------------------+
+
+  PURPOSE : Updates the BCCH allocation list.
+
+*/
+
+GLOBAL void nc_update_ba_list (USHORT serving_cell, T_MPH_NEIGHBOURCELL_REQ *ncell_list)
+{
+  GET_INSTANCE_DATA;
+  USHORT  n_rr;     /* index of RR neighbor cell list */
+  USHORT  n_alr;    /* index of ALR neighbor cell list */
+  UBYTE   last_alr; /* last index of ALR neighbor cell list */
+  USHORT  arfcn;
+  T_NC*   pcell;
+
+  alr_data->nc_data.multiband = ncell_list->multi_band;
+
+  /*
+   * remove or mark all channels which are not longer member of the
+   * neighbour cell list.
+   */
+  last_alr = alr_data->nc_data.c_ba_arfcn;  /* current last index */
+  for (n_alr = 0; n_alr < last_alr; n_alr++)
+  {
+    pcell = &alr_data->nc_data.cell[n_alr];
+    arfcn = pcell->ba_arfcn;
+    if (!nc_is_in_ncell_list (arfcn, ncell_list) AND
+        (arfcn NEQ serving_cell))
+    {
+      if (GET_STATE(STATE_NC) EQ NC_IDLE)
+      { /* the RR neighbor cell list is complete */
+        last_alr = nc_remove_channel_from_ba_list (n_alr);
+#if defined(TRACING)
+        TRACE_EVENT_P2 ("NC%u[%u] remove", n_alr, arfcn);
+#endif  /* TRACING */
+        n_alr--;
+        ALR_TRACE_ALL_NC ();
+      }
+      else
+      { /* the RR neighbor cell list may be incomplete so mark only the entry */
+        if (pcell->ba_status EQ IN_BA)
+        {
+          pcell->ba_status = NOT_IN_BA_SHORT;
+
+#if defined(TRACING)
+          TRACE_EVENT_P2 ("NC%u[%u] -> NOT_IN_BA_SHORT", n_alr, arfcn);
+#endif  /* TRACING */
+        }
+      }
+    }
+  }
+
+  /*
+   * add all new channels.
+   */
+  for (n_rr = 0; n_rr < MAX_NEIGHBOURCELLS; n_rr++)
+  {
+    arfcn = ncell_list->arfcn[n_rr];
+    if (arfcn EQ NOT_PRESENT_16BIT)
+      break;  /* no more entries in the RR ncell_list */
+
+    n_alr = nc_get_index (arfcn);
+
+    if (arfcn NEQ serving_cell)
+    {
+      if (n_alr EQ NOT_PRESENT_16BIT OR n_alr EQ LAST_BSIC_REQ)
+      {
+        if (last_alr < BA_LIST_SIZE)
+        {
+          pcell = &alr_data->nc_data.cell[last_alr];
+
+#if defined(TRACING)
+          TRACE_EVENT_P2 ("NC%u[%u] add", last_alr, arfcn);
+#endif  /* TRACING */
+          pcell->ba_arfcn = arfcn;
+          nc_set_status (last_alr, INACTIVE);
+          pcell->ba_status = IN_BA;
+          last_alr++; /* increment last index */
+        }
+        else
+        { /* ALR list is full, search for an entry not in state IN_BA */
+          USHORT i;
+          for (i = 0, pcell = alr_data->nc_data.cell; i < BA_LIST_SIZE; i++, pcell++)
+          {
+            if (pcell->ba_status NEQ IN_BA AND pcell->ba_arfcn NEQ serving_cell)
+            {
+              nc_stop_if_active(i);
+#if defined(TRACING)
+              TRACE_EVENT_P2 ("NC%u[%u] replace", i, arfcn);
+#endif  /* TRACING */
+              pcell->ba_arfcn = arfcn;
+              nc_set_status (i, INACTIVE);
+              pcell->ba_status = IN_BA;
+              break;
+            }
+          } /* for (i...) */
+        }
+      }
+      else
+      {
+#if defined(TRACING)
+        if (alr_data->nc_data.cell[n_alr].ba_status NEQ IN_BA)
+          TRACE_EVENT_P2 ("NC%u[%u] -> IN_BA", n_alr, arfcn);
+#endif
+        alr_data->nc_data.cell[n_alr].ba_status = IN_BA;
+      }
+    }  /* if (arfcn NEQ serving_cell) */
+  }
+
+  /*
+   * store whether SC was included into the BA list by the net
+   */
+  if (nc_is_in_ncell_list (serving_cell, ncell_list))
+  {
+    alr_data->nc_data.sc_included = TRUE;
+  }
+  else
+  {
+    alr_data->nc_data.sc_included = FALSE;
+  }
+  alr_data->nc_data.c_ba_arfcn = last_alr;  /* store new last index */
+
+  /*
+   * Add serving cell if not included
+   */
+  n_alr = nc_get_index (serving_cell);
+  switch (n_alr)
+  {
+    case NOT_PRESENT_16BIT:
+    case LAST_BSIC_REQ:
+      n_alr = nc_find_serving_cell_entry(serving_cell);
+      pcell = &alr_data->nc_data.cell[n_alr];
+
+      pcell->bsic               = alr_data->bsic;
+      pcell->frame_offset       = 0;
+      pcell->time_align         = 0;
+      break;
+
+    default:
+      /* serving cell is already included */
+      pcell = &alr_data->nc_data.cell[n_alr];
+      pcell->bsic               = alr_data->bsic;
+      pcell->frame_offset       = 0;
+      pcell->time_align         = 0;
+      pcell->ba_status          = IN_BA;          /* even if not in the BA but other functions need it */
+      nc_set_status (n_alr, FB_SB_SYNC);          /* make sure the SC is reported in measurement reports if included into BA list */
+      break;
+  }
+
+  /*
+   * reset status of neighbour cells with failed
+   * synchronisation attempts.
+   */
+  for (n_alr = 0; n_alr < last_alr; n_alr++)
+  {
+    switch (alr_data->nc_data.cell[n_alr].status)
+    {
+      case FB_SB_FAILED:
+      case EXCLUDED:
+        alr_data->nc_data.cell[n_alr].tim_valid = TV_INVALID_TIMING_INFO;
+        nc_set_status (n_alr, IDLE);
+        break;
+    }
+  }
+
+  /*
+   * Reorder the entries. The goal is that the propably strongest neigbour cells
+   * are measured in the first measurement period of a subsequent
+   * MPHC_RXLEV_PERIODIC_REQ/IND. The appropriate arfcn's are the first ones in
+   * ncell_list->arfcn
+   */
+  if (last_alr > 8)
+  {
+    T_NC temp, *prr, *palr;
+
+    for (n_rr = 0; n_rr < 8 && ncell_list->arfcn[n_rr] NEQ NOT_PRESENT_16BIT; n_rr++)
+    {
+      n_alr = nc_get_index (ncell_list->arfcn[n_rr]);
+      if (n_rr NEQ n_alr)
+      {
+        palr = &(alr_data->nc_data.cell[n_alr]);
+        prr  = &(alr_data->nc_data.cell[n_rr]);
+        memcpy(&temp, palr,  sizeof(T_NC));
+        memcpy(palr,  prr,   sizeof(T_NC));
+        memcpy(prr,   &temp, sizeof(T_NC));
+      /*TRACE_EVENT_P4("reordered NC%u[%u] and NC%u[%u]",
+                        n_rr,
+                        ncell_list->arfcn[n_rr],
+                        n_alr, ncell_list->arfcn[n_alr]);*/
+      }
+    }
+  }
+
+  ALR_TRACE_ALL_NC ();
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_new_serving_cell        |
++--------------------------------------------------------------------+
+
+  PURPOSE : Store old, set new serving cell, and add to neighbourcell list.
+
+*/
+GLOBAL void nc_new_serving_cell (USHORT serving_cell)
+{
+  GET_INSTANCE_DATA;
+  alr_data->old_serving_cell = alr_data->serving_cell;
+  alr_data->serving_cell = serving_cell;
+  alr_data->sc_band = get_band (alr_data->serving_cell);
+  nc_add_serving_cell_ba_list(serving_cell);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_is_in_ncell_list        |
++--------------------------------------------------------------------+
+
+  PURPOSE : Checks whether a channel is in the ncell_list of RR.
+
+*/
+LOCAL UBYTE nc_is_in_ncell_list (USHORT channel, T_MPH_NEIGHBOURCELL_REQ *ncell_list)
+{
+  USHORT i;
+
+  for (i = 0; i < MAX_NEIGHBOURCELLS AND ncell_list->arfcn[i] NEQ NOT_PRESENT_16BIT; i++)
+  {
+    if (channel EQ ncell_list->arfcn[i])
+      return TRUE;
+  }
+
+  return FALSE;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)   MODULE  : ALR_NC                         |
+| STATE   : code            ROUTINE : nc_remove_channel_from_ba_list |
++--------------------------------------------------------------------+
+
+  PURPOSE : Removes one channel from the BCCH allocation.
+
+*/
+
+LOCAL UBYTE nc_remove_channel_from_ba_list (USHORT index)
+{
+  GET_INSTANCE_DATA;
+  USHORT  i;
+  UBYTE   c_ba_arfcn;
+
+  switch(alr_data->nc_data.cell[index].status)
+  {
+    case READ_SB_PENDING:
+    case READ_SB_BCCH_PENDING:
+      if ( alr_data->nc_data.eotd_avail AND
+           ( GET_STATE(STATE_NC_PROC) EQ NC_CONFIRM) )
+      {
+        /* we cannot stop this
+         * because we are using a list_req
+         */
+        nc_set_status(index, INACTIVE);
+        break;
+      }
+      /*lint -fallthrough*/
+    case READ_FB_SB_PENDING:
+      /*
+       * sync request is ongoing in layer 1.
+       */
+      nc_stop_sync (index, INACTIVE);
+      break;
+    case READ_BCCH_PENDING:
+    case READ_BCCH_PENDING_RR_NOT_INFORMED:
+      /*
+       * stop pending BCCH request
+       */
+      nc_stop_bcch (index, INACTIVE);
+      break;
+    default:
+      nc_set_status (index, INACTIVE);
+      break;
+  }
+
+  c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+  for (i = index + 1; i < c_ba_arfcn; i++)
+  {
+    memcpy (&alr_data->nc_data.cell[i - 1],&alr_data->nc_data.cell[i],sizeof(T_NC));  /*shift NC*/
+  }
+  memset (&alr_data->nc_data.cell[i - 1],0,sizeof (T_NC));/*delete old content of obsolete ba_list entry*/
+
+  alr_data->nc_data.c_ba_arfcn--;
+  return (alr_data->nc_data.c_ba_arfcn);
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_get_index               |
++--------------------------------------------------------------------+
+
+  PURPOSE : Calculates the index in the BCCH allocation.
+
+*/
+
+GLOBAL USHORT nc_get_index (USHORT arfcn)
+{
+  GET_INSTANCE_DATA;
+  USHORT  i;
+  T_NC    *pcell; /* use pointer to increase processing speed */
+  USHORT  last_alr; /* last index of ALR neighbor cell list */
+
+  last_alr = alr_data->nc_data.c_ba_arfcn;
+  pcell = &alr_data->nc_data.cell[0]; /* pointer to first cell */
+  for (i = 0; i < last_alr; i++, pcell++)
+  {
+    if (arfcn EQ pcell->ba_arfcn)
+      return i;
+  }
+
+  if (arfcn EQ alr_data->nc_data.cell[LAST_BSIC_REQ].ba_arfcn)
+    return LAST_BSIC_REQ;
+
+  return NOT_PRESENT_16BIT;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_build_sync_req          |
++--------------------------------------------------------------------+
+
+  PURPOSE : Builds an MPHC_NCELL_SYNC_REQ and sends it to L1.
+
+*/
+LOCAL void nc_build_sync_req (USHORT index)
+{
+  GET_INSTANCE_DATA;
+
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+  UBYTE  i,j;
+  T_enh_para_struct *enh_para = &alr_data->nc_data.emr_data.enh_para;
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+
+  T_NC * p_ncell = &alr_data->nc_data.cell[index];
+
+#ifdef TI_PS_FF_QUAD_BAND_SUPPORT
+  USHORT l1_arfcn;
+#endif
+
+#ifdef TI_PS_FF_QUAD_BAND_SUPPORT
+  if (alr_data->plmn_search_running AND (index EQ LAST_BSIC_REQ) AND (alr_multiband_std NEQ NOT_PRESENT_8BIT))
+  {
+    l1_arfcn = ARFCN_STD_TO_L1 (p_ncell->ba_arfcn, alr_multiband_std);
+    TRACE_EVENT_P2 ("Converted ARFCN %d for std %d", l1_arfcn, alr_multiband_std);
+  }
+  else
+    l1_arfcn = ARFCN_TO_L1 (p_ncell->ba_arfcn);
+#endif
+
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+  if(enh_para->enh_cell_list[index].v_rtd EQ 1)
+    p_ncell->tim_valid=TV_RTD_TIMING_INFO ;
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+
+
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+  if(p_ncell->tim_valid EQ TV_RTD_TIMING_INFO)
+  {
+    for(j=0;j<MAX_NEIGHBOURCELLS;j++)
+    { 
+      if(p_ncell->ba_arfcn EQ enh_para->enh_cell_list[j].arfcn)
+        break;
+    } /*for*/
+   if(j < MAX_NEIGHBOURCELLS)
+    {	
+    for(i=0;i<enh_para->enh_cell_list[j].c_rtd;i++)
+    { 
+
+      PALLOC (sync_req, MPHC_NCELL_SYNC_REQ);
+      sync_req->radio_freq = ARFCN_TO_L1(p_ncell->ba_arfcn);
+      sync_req->fn_offset = nc_sync_fn_offset_calculation(enh_para->enh_cell_list[index].rtd[i]);
+      sync_req->time_alignment = nc_sync_time_alignment_calculation(enh_para->enh_cell_list[index].rtd[i]);
+      sync_req->timing_validity =p_ncell->tim_valid ;
+      alr_data->nc_data.cell[index].c_sync_req++;
+      TRACE_EVENT_P4("nc_build_sync_req[%d] timing_validity=%d fn_offset=%ld, time_alignment=%ld",
+                      p_ncell->ba_arfcn,
+                      sync_req->timing_validity,
+                      sync_req->fn_offset,
+                      sync_req->time_alignment);
+
+      ma_nc_sync_req(sync_req);
+      alr_data->nc_data.c_sync_req++;
+
+    } /*for*/
+  }
+   }
+  else
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+  {
+    PALLOC (sync_req, MPHC_NCELL_SYNC_REQ);
+#ifdef TI_PS_FF_QUAD_BAND_SUPPORT
+    sync_req->radio_freq = l1_arfcn;
+#else
+    sync_req->radio_freq = ARFCN_TO_L1(p_ncell->ba_arfcn);
+#endif
+
+    if (p_ncell->tim_valid EQ TV_INVALID_TIMING_INFO) 
+	{
+
+      sync_req->fn_offset      = 0;
+      sync_req->time_alignment = 0;
+
+	}
+    else
+	{
+      sync_req->fn_offset      = p_ncell->frame_offset;
+      sync_req->time_alignment = p_ncell->time_align;
+	}
+
+    sync_req->timing_validity = p_ncell->tim_valid;
+    TRACE_EVENT_P4("nc_build_sync_req[%d] timing_validity=%d fn_offset=%ld, time_alignment=%ld",
+                  p_ncell->ba_arfcn,
+                  sync_req->timing_validity,
+                  sync_req->fn_offset,
+                  sync_req->time_alignment);
+    ma_nc_sync_req (sync_req);
+    alr_data->nc_data.c_sync_req++;
+  }
+
+
+  ALR_EM_READ_NEIGHBOURCELL_SB;
+
+  nc_set_status (index, READ_FB_SB_PENDING);
+
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_process_status          |
++--------------------------------------------------------------------+
+
+  PURPOSE : Starts a specific procedure for neighbour cells like
+            synchronisation to frequency correction burst and
+            synchron burst, confirmation of synchron burst or
+            reading of BCCH. With the new ALR interface it's possible
+            to send up to 12 SYNC_REQ's and BCCH_REQ's.
+
+*/
+
+LOCAL void nc_process_status (void)
+{
+  GET_INSTANCE_DATA;
+  UBYTE st = GET_STATE(STATE_NC);
+
+  /* Sync requests for New cells are allowed only in dedicated state
+   * when eotd is not enabled. Fix for 
+   */
+  if(((alr_data->nc_data.eotd_avail) OR ( st NEQ NC_DEDICATED)) AND 
+     (GET_STATE(STATE_NC_PROC) EQ NC_CONFIRM))
+    return;
+
+#ifdef GPRS
+  if((st EQ NC_IDLE AND !ma_is_ptm()) OR
+      st EQ NC_PIM_PBCCH )
+    nc_process_status_last_bsic();
+#else
+  nc_process_status_last_bsic();
+#endif
+
+
+  if(alr_data->plmn_search_running)
+    return;
+
+#ifdef GPRS
+  if(st EQ NC_PIM_PBCCH OR
+     st EQ NC_PTM_PBCCH   )
+     nc_process_status_sync_gprs();
+  else
+#endif
+    nc_process_status_sync();
+
+  if(st EQ NC_IDLE)
+    nc_process_status_bcch();
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_process_status_last_bsic|
++--------------------------------------------------------------------+
+
+  PURPOSE : When doing idle mode cell selection we use
+      LAST_BSIC_REQ for storing the information of the cell.
+            This has priority over normal neighbour cell monitoring.
+
+*/
+
+
+LOCAL void nc_process_status_last_bsic(void)
+{
+  GET_INSTANCE_DATA;
+  T_NC* pbsic = &alr_data->nc_data.cell[LAST_BSIC_REQ];
+
+
+  switch (pbsic->status)
+  {
+    case READ_FB_SB:
+      if (alr_data->nc_data.c_sync_req < MAX_L1_SYNC_CNT)
+      {
+        pbsic->tim_valid = TV_INVALID_TIMING_INFO;
+        nc_build_sync_req (LAST_BSIC_REQ);
+        ALR_TRACE_NC ("ncell_sync_req HPLMN");
+
+   /* If the Mobile is in page mode REORG the NC search cannot be
+    * performed because L1 is too busy listening to the PCH. Therefore
+    * the page mode is changed from REORG to REORG_NC_SYNC (NORMAL).
+    */
+    if(alr_data->pch_data.pl_idle.page_mode EQ PGM_REORG OR
+       alr_data->pch_data.pl_idle.page_mode EQ PGM_REORG_CS)
+    {
+      page_mode_before_hplmn_search = alr_data->pch_data.pl_idle.page_mode;
+      alr_data->pch_data.pl_idle.page_mode = PGM_REORG_NC_SYNC;
+      pch_start_ccch_req ();
+      ALR_TRACE_NC ("HPLMN search cannot be performed with REORG - possible loss of pagings");
+    }
+
+      }
+      return ;
+
+    case READ_BCCH:
+      if (alr_data->nc_data.c_bcch_req < MAX_L1_BCCH_CNT)
+      {
+        PALLOC (ncell_bcch, MPHC_NCELL_BCCH_REQ);
+
+#ifdef TI_PS_FF_QUAD_BAND_SUPPORT
+        if (alr_data->plmn_search_running AND (alr_multiband_std NEQ NOT_PRESENT_8BIT))
+        {
+          ncell_bcch->radio_freq = ARFCN_STD_TO_L1(pbsic->ba_arfcn, alr_multiband_std);
+          alr_multiband_std = NOT_PRESENT_8BIT;
+        }
+        else
+#endif
+          ncell_bcch->radio_freq = ARFCN_TO_L1(pbsic->ba_arfcn);
+        ncell_bcch->fn_offset = pbsic->frame_offset;
+        ncell_bcch->time_alignment = pbsic->time_align;
+        /*
+         * The training sequence code on broadcast and common control channels
+         * has to be equal to the base station color code see GSM 5.02
+         */
+        ncell_bcch->tsc = (UBYTE)(pbsic->bsic & ONLY_BCC);
+        /*
+         * Read SI 3/4 to get the MNC/MCC
+         */
+        pbsic->blocks_required =
+          ncell_bcch->bcch_blocks_required = NCELL_BCCH_SI_3_4;
+#ifdef GPRS
+        if(alr_data->pch_data.pl_idle.page_mode EQ PGM_REORG OR
+           alr_data->pch_data.pl_idle.page_mode EQ PGM_REORG_CS OR
+           alr_data->pch_data.reorg_bcch_reading EQ TRUE OR
+           pbsic->new_strong_cell OR
+           !pbsic->c_attempt   // EQ 0
+)
+        {
+          ncell_bcch->gprs_prio            = GPRS_PRIO_TOP;
+        }
+        else
+#endif
+        ncell_bcch->gprs_prio = GPRS_PRIO_NORM;
+
+        ma_nc_bcch_req (ncell_bcch);
+        alr_data->nc_data.c_bcch_req++;
+        nc_set_status (LAST_BSIC_REQ, READ_BCCH_PENDING);
+      }
+      return;
+    case READ_FB_SB_PENDING:
+    case READ_BCCH_PENDING:
+      return;
+    default:
+      break;
+  }
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_process_status_sync     |
++--------------------------------------------------------------------+
+
+  PURPOSE : Processes cell synchronisation.
+
+*/
+
+
+
+LOCAL void nc_process_status_sync(void)
+{
+  GET_INSTANCE_DATA;
+  /* To avoid warnings */
+  USHORT index;
+
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+  USHORT i;
+  T_enh_para_struct *enh_para = &alr_data->nc_data.emr_data.enh_para;
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+
+  /* Sync requests for New cells are allowed only in dedicated state
+   * when eotd is not enabled. Patch for 
+   */
+  if((!alr_data->nc_data.eotd_avail) AND 
+     ( GET_STATE(STATE_NC) EQ NC_DEDICATED) AND 
+     (GET_STATE(STATE_NC_PROC) EQ NC_CONFIRM))
+  {
+    if(alr_data->nc_data.new_strong_cell_detect)
+      nc_handle_new_strong_cells();
+   
+    alr_data->nc_data.new_strong_cell_detect = FALSE;    
+    return;
+  }
+
+#if defined (REL99) && defined (TI_PS_FF_EMR)
+  if ( alr_data->nc_data.emr_data.rep_type EQ REP_TYPE_ENH )
+  {
+    nc_process_status_sync_emr();
+    return;
+  }
+#endif
+
+  while (alr_data->nc_data.c_sync_req < MAX_L1_SYNC_CNT)
+  {
+    /*
+     * It is possible to send more sync requests to layer 1
+     */
+
+    index = NOT_PRESENT_16BIT;
+     nc_highst_field_strng(&index, PRO_STA_SYNC);
+
+    if (index NEQ NOT_PRESENT_16BIT)
+    {
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+      if ((alr_data->nc_data.emr_data.rep_type NEQ REP_TYPE_ENH) AND (!enh_para->enh_cell_list[index].v_rtd ))
+      {
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+          /*
+           * Request synchronisation for this cell
+           */
+          nc_build_sync_req(index);
+          ALR_TRACE_NC ("ncell_sync_req");
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+      }
+      else
+      {
+
+      for(i=0;i<MAX_NEIGHBOURCELLS;i++)
+      {
+        if(alr_data->nc_data.cell[index].ba_arfcn EQ enh_para->enh_cell_list[i].arfcn)
+          break;
+      } /*for*/ 
+      if((i < MAX_NEIGHBOURCELLS) AND (enh_para->enh_cell_list[i].c_rtd < MAX_L1_SYNC_CNT - alr_data->nc_data.c_sync_req))
+      { 
+        /*
+           * Request synchronisation for this cell
+           */
+          nc_build_sync_req(index);
+          ALR_TRACE_NC ("ncell_sync_req_for_rtd");
+          alr_data->nc_data.nxt_ind++;  
+      }
+      else
+        break; /*while loop */
+      	}
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+
+    }
+    else
+      break; /*while loop */
+  } /* while( c_sync_req < MAX_L1_SYNC_CNT) */
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+  /* reset the sync flag if we have sent sync req for all neighbourcells*/
+  if(alr_data->nc_data.nxt_ind EQ alr_data->nc_data.c_ba_arfcn - 1) 
+    alr_data->nc_data.nxt_ind = 0; 
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+
+}
+
+#if defined (REL99) && defined (TI_PS_FF_EMR)
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE    : code                ROUTINE : nc_process_status_sync_emr |
++--------------------------------------------------------------------+
+
+  PURPOSE : Processes cell synchronisation status for EMR. In EMR
+  we may have to request for synchronization for more than 12 cells.
+  Since L1 has limitation of handling more than 12, we have to consider
+  how many are being handled by L1 already and then form the request 
+  accordingly.
+*/
+LOCAL void nc_process_status_sync_emr(void)
+{
+  GET_INSTANCE_DATA;
+  UBYTE             i = 0;
+  T_NC*             pcell = &alr_data->nc_data.cell[0];
+  UBYTE             j;
+  T_ncell_list      *sync_req;
+  UBYTE             k;  
+  ULONG             rank_cell_bmp=alr_data->nc_data.rank_cell_bmp;
+  UBYTE             num_scb = 0;
+  UBYTE             num_mb = 0;
+  UBYTE             num_rest = 0;
+  UBYTE             total_to_req = 0;
+  UBYTE             scb[4];
+  UBYTE             mb[4];
+  UBYTE             rest[32];
+  UBYTE             max=0;
+  T_enh_para_struct *p_enh = &alr_data->nc_data.emr_data.enh_para;  
+  UBYTE             nc_index;
+  
+  memset (scb, 0, 4 * sizeof (UBYTE));
+  memset (mb, 0, 4 * sizeof (UBYTE));
+  memset (rest, 0, 32 * sizeof (UBYTE));
+    /*First rank the cells as per EMR related criteria*/
+  while ( i <alr_data->nc_data.c_ba_arfcn  )
+  {
+    max = 0;  
+    k = i;
+    for (j= 0; j < alr_data->nc_data.c_ba_arfcn; j++)
+    {
+    /*Do not include ranked cells in subsequent search*/
+      if (( ((rank_cell_bmp >>j) &(0x00000001)) EQ FALSE ) AND
+        (pcell[j].rxlev_average > max ) AND 
+        ( pcell[j].status EQ READ_FB_SB))
+      {
+        max = pcell[j].rxlev_average;
+        k = j;
+      }          
+    }
+    /*For the highest rxlev with status READ_FB_SB :
+    find into which category this cell falls into*/
+    
+    if ( k NEQ i )          
+    {
+      if ( get_band(pcell[k].ba_arfcn) EQ get_band(alr_data->serving_cell) )
+      {
+        /*serving band: we require only first SERVINGBAND_REPORTING number of 
+       cells which will have higher priority */
+        if (num_scb < p_enh->servingband_rep)
+          scb[num_scb++] = k;
+        else
+          rest[num_rest++] = k;
+      }         
+      else
+      {
+      /*It's a cell on non-serving band: On a priority basis, we need
+        to synchronize atleast first MULTIBAND_REPORTING number of cells*/
+        if( num_mb < p_enh->multiband_rep)
+          mb[num_mb++] = k;
+        else
+          rest[num_rest++] = k;
+      }    
+      rank_cell_bmp |= 1<<k; /*Indicate that this cell is ranked*/
+    }
+    i++;    
+  }/*while 'i'*/
+  
+  alr_data->nc_data.rank_cell_bmp = rank_cell_bmp;
+  total_to_req = num_scb + num_mb + num_rest;
+  
+  k=0;  
+  if ( total_to_req > 0)
+  {
+    PALLOC (ncell_list_req, MPHC_NCELL_LIST_SYNC_REQ);    
+       
+    i = ncell_list_req->list_size = 0; 
+    /*If previously some sync requests are pending, we consider this number while
+    forming the current sync request*/  
+    while ( (i < (MAX_L1_SYNC_CNT - alr_data->nc_data.c_sync_req)) AND
+            (i < total_to_req)  )
+    {
+      /*Include the cells in the order - cells in serving band, cells in non-serving band,
+      and the other cells with low RXLEV*/
+      nc_index = NOT_PRESENT_8BIT;
+      if (num_scb > 0)
+      {
+        nc_index = scb[k++];
+        num_scb--;
+        if (num_scb EQ 0)
+          k = 0;
+      }
+      else if (num_mb > 0)
+      {
+        nc_index = mb[k++];
+        num_mb--;
+        if (num_mb EQ 0)
+          k = 0;
+      }
+      else if (num_rest > 0)
+      {
+        nc_index = rest[k++];
+        num_rest--;
+      }        
+      if (nc_index NEQ NOT_PRESENT_8BIT )
+      {
+        sync_req = &ncell_list_req->ncell_list[i++];
+        sync_req->radio_freq  = ARFCN_TO_L1(pcell[nc_index].ba_arfcn);
+        sync_req->timing_validity = pcell[nc_index].tim_valid;
+        
+        if (pcell[nc_index].tim_valid EQ TV_INVALID_TIMING_INFO)
+        {
+          sync_req->fn_offset = 0;
+          sync_req->time_alignment = 0;
+        }
+        else
+        {
+          sync_req->fn_offset = pcell[nc_index].frame_offset;
+          sync_req->time_alignment = pcell[nc_index].time_align;
+        }      
+        nc_set_status(nc_index,READ_FB_SB_PENDING);          
+      }
+      
+    }
+    ncell_list_req->list_size = i;
+    alr_data->nc_data.c_sync_req += i;
+    ncell_list_req->eotd = FALSE;
+    ma_nc_list_sync_req(ncell_list_req);
+  }  
+}
+#endif
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_process_status_sync_gprs|
++--------------------------------------------------------------------+
+
+  PURPOSE : Processes GPRS cell synchronisation.
+
+*/
+
+
+#ifdef GPRS /*XXX*/
+LOCAL void nc_process_status_sync_gprs(void)
+{
+  GET_INSTANCE_DATA;
+  USHORT i;
+#ifdef FF_RTD
+  USHORT j;
+  T_enh_para_struct *enh_para = &alr_data->nc_data.emr_data.enh_para;
+#endif /* #ifdef FF_RTD */
+
+  T_NC* pbsic = &alr_data->nc_data.cell[LAST_BSIC_REQ];
+  USHORT  c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+
+
+  for (i = 0; i < c_ba_arfcn AND alr_data->nc_data.c_sync_req < MAX_L1_SYNC_CNT; i++)
+  {
+    /*
+     * search for the candidate with the highest fieldstrength
+     */
+    T_NC* pcell = &alr_data->nc_data.cell[i];
+
+    if ((pcell->ba_arfcn NEQ pbsic->ba_arfcn) AND
+        (pcell->ba_arfcn NEQ alr_data->serving_cell) AND
+        (pcell->status EQ READ_FB_SB))
+    {
+#ifdef FF_RTD 
+      for(j=0;j<MAX_NEIGHBOURCELLS;j++)
+      { 
+        if(pcell->ba_arfcn EQ enh_para->enh_cell_list[j].arfcn)
+        break;
+      } /*for*/ 
+      if(enh_para->enh_cell_list[j].c_rtd < MAX_L1_SYNC_CNT - alr_data->nc_data.c_sync_req)
+      {
+#endif /* #ifdef FF_RTD */
+
+      /*
+       * Request synchronisation for this cell
+       */
+      nc_build_sync_req(i);
+      ALR_TRACE_NC ("ncell_sync_req");
+#ifdef FF_RTD 
+        alr_data->nc_data.nxt_ind++;
+      }
+      else
+        break;
+#endif /* #ifdef FF_RTD */
+    }
+  }
+#ifdef FF_RTD 
+  if(alr_data->nc_data.nxt_ind EQ c_ba_arfcn-1)
+    alr_data->nc_data.nxt_ind = 0;
+#endif /* #ifdef FF_RTD */
+
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_sync_failed_gprs      |
++--------------------------------------------------------------------+
+
+  PURPOSE : Handles synchronisation failed situation
+
+*/
+
+
+LOCAL void nc_sync_failed_gprs(USHORT index)
+{
+  GET_INSTANCE_DATA;
+  alr_data->nc_data.cell[index].c_sync = 1; /*XXX*/
+  nc_set_status (index, FB_SB_FAILED);
+  nc_inform_grr_of_ncell(index, GRR_SB_NOT_FOUND);
+}
+#endif
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_process_status_bcch     |
++--------------------------------------------------------------------+
+
+  PURPOSE : Processes CB status
+
+*/
+
+
+LOCAL void nc_process_status_bcch(void)
+{
+  GET_INSTANCE_DATA;
+
+  /* To avoid warnings */
+  USHORT index;
+
+  /* To avoid warnings */
+  while (alr_data->nc_data.c_bcch_req < MAX_L1_BCCH_CNT)
+  {
+    /*
+     * It is possible to send more BCCH request to layer 1
+     */
+
+  /* To avoid warnings */
+    index = NOT_PRESENT_16BIT;
+     nc_highst_field_strng(&index, PRO_STA_BCCH);
+
+    if (index NEQ NOT_PRESENT_16BIT)
+    {
+      /*
+       * Request BCCH reading for this cell
+       */
+      T_NC* pcell = &alr_data->nc_data.cell[index];
+      PALLOC (ncell_bcch, MPHC_NCELL_BCCH_REQ);
+
+      ncell_bcch->radio_freq = ARFCN_TO_L1(pcell->ba_arfcn);
+      ncell_bcch->fn_offset = pcell->frame_offset;
+      ncell_bcch->time_alignment = pcell->time_align;
+      /*
+       * The training sequence code on broadcast and common control channels
+       * has to be equal to the Base Station Colour Code (BCC),
+       * see 3GPP TS 5.02, section 5.2.3 and
+       * 3GPP TS 03.03, section 4.3.2 Base Station Identify Code (BSIC)
+       */
+      ncell_bcch->tsc = (UBYTE)(pcell->bsic & ONLY_BCC);
+      pcell->blocks_required =
+        ncell_bcch->bcch_blocks_required = NCELL_BCCH_SI_3_4;
+#ifdef GPRS
+      /*if the mobile is in PTM the GPRS_PRIORITY must be set to TOP*/
+      if(alr_data->pch_data.pl_idle.page_mode EQ PGM_REORG OR
+         alr_data->pch_data.pl_idle.page_mode EQ PGM_REORG_CS OR
+         alr_data->pch_data.reorg_bcch_reading EQ TRUE OR
+         pcell->new_strong_cell OR
+         !pcell->c_attempt OR  // EQ 0
+         ma_is_ptm())
+      {
+        ncell_bcch->gprs_prio = GPRS_PRIO_TOP;
+      }
+      else
+#endif
+        ncell_bcch->gprs_prio = GPRS_PRIO_NORM;
+
+
+      ma_nc_bcch_req (ncell_bcch);
+
+      ALR_TRACE_NC("ncell_bcch_read");
+
+      alr_data->nc_data.c_bcch_req++;
+      /*
+       * read a maximum of four blocks
+       *
+       * sys info 3 normal BCCH TC 2 or 6
+       * sys info 4 normal BCCH TC 3 or 7
+       */
+      if(pcell->status EQ READ_BCCH)
+        nc_set_status (index, READ_BCCH_PENDING);
+      else
+        nc_set_status (index, READ_BCCH_PENDING_RR_NOT_INFORMED);
+    }
+    else
+      break; /*while loop */
+  } /* while(c_bcch_req < MAX_L1_BCCH_CNT)*/
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_ncell_in_plmn_permitted |
++--------------------------------------------------------------------+
+
+  PURPOSE : checks whether the national colour code (ncc) is member
+            of the ncc permitted field.
+
+*/
+static const UBYTE ncc_bit_mask[8] =
+  {
+    BIT_0, BIT_1, BIT_2, BIT_3,
+    BIT_4, BIT_5, BIT_6, BIT_7
+  };
+
+LOCAL BOOL nc_ncell_in_plmn_permitted (UBYTE bsic)
+{
+  GET_INSTANCE_DATA;
+  return ((BOOL) ((UBYTE) (alr_data->ncc_permitted &
+                           ncc_bit_mask[(bsic >> 3) & BIT_012])) NEQ 0);
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_store_dedicated         |
++--------------------------------------------------------------------+
+
+  PURPOSE : Stores the values of the neighbour cells
+            and the serving cell.
+
+*/
+LOCAL void nc_store_dedicated (T_MPHC_MEAS_REPORT *report)
+{
+  GET_INSTANCE_DATA;
+  USHORT i;
+  USHORT index;
+
+  if (alr_data->nc_data.tim_state NEQ NC_TIM_STOPPED)
+  {
+    /* Decrement the 10sec timer counter variable by 2 */
+    alr_data->nc_data.c_ncsync_tim = alr_data->nc_data.c_ncsync_tim-2;
+  
+    if ((signed char)( alr_data->nc_data.c_ncsync_tim) < 0)
+      alr_data->nc_data.c_ncsync_tim = 0;
+
+    if( alr_data->nc_data.c_ncsync_tim EQ 0 )    /* 10 sec have elapsed. Perform all requisite tasks */
+      nc_ncsync_tim_expiry();
+  }
+ 
+  for (i = 0; i < report->no_of_ncells_meas; i++)
+  {
+    T_NC* pcell;
+    T_res_list* plist = &report->ncell_meas.res_list[i];
+
+    index = nc_get_index (ARFCN_TO_G23(plist->bcch_freq));
+    if ((index EQ NOT_PRESENT_16BIT) OR (index EQ LAST_BSIC_REQ))
+      continue;
+    pcell = &alr_data->nc_data.cell[index];
+
+    if (plist->rxlev_nbr_meas EQ 0)
+      pcell->rxlev_average = 0;
+    else
+    {
+      if ((signed short)(plist->rxlev_acc) < 0)
+        plist->rxlev_acc = 0;
+
+      /* why this casting? - a "real" expression is of type int */
+      pcell->rxlev_average = (UBYTE)(plist->rxlev_acc/plist->rxlev_nbr_meas);
+    }
+    if (pcell->status EQ INACTIVE)
+      nc_set_status (index, IDLE);
+
+    if (pcell->status EQ EXCLUDED)
+    {
+      int diff;
+
+      diff = pcell->rxlev_average - pcell->last_rxlev;
+
+      if (diff >= 6)
+      {
+        /*
+         * result is positive and more than 6 dBm
+         */
+        nc_set_status (index, IDLE);
+      }
+    }
+  }
+
+
+  alr_data->nc_data.act_dtx = report->dtx_used;
+
+  if (report->rxlev_full_nbr_meas EQ 0)
+    alr_data->nc_data.rxlev_full = 0;
+  else
+  {
+    if ((signed short)(report->rxlev_full_acc) < 0)
+      report->rxlev_full_acc = 0;
+
+    alr_data->nc_data.rxlev_full =
+      (UBYTE)(report->rxlev_full_acc / report->rxlev_full_nbr_meas);
+  }
+
+  if (report->rxlev_sub_nbr_meas EQ 0)
+    alr_data->nc_data.rxlev_sub = 0;
+  else
+  {
+    if ((signed short)(report->rxlev_sub_acc) < 0)
+      report->rxlev_sub_acc = 0;
+    alr_data->nc_data.rxlev_sub = (UBYTE)(report->rxlev_sub_acc / report->rxlev_sub_nbr_meas);
+  }
+
+  alr_data->nc_data.rxqual_full =
+    nc_convert_quality (report->rxqual_full_acc_errors,
+                        report->rxqual_full_nbr_bits);
+
+  alr_data->nc_data.rxqual_sub =
+    nc_convert_quality (report->rxqual_sub_acc_errors,
+                        report->rxqual_sub_nbr_bits);
+#if defined (REL99) && defined (TI_PS_FF_EMR)
+  /* Additions for EMR */
+  if (alr_data->nc_data.emr_data.rep_type EQ REP_TYPE_ENH)
+  {    
+    /* store the serving cell measurements that have to be reported in
+       enhanced measurement report*/
+    if (report->rxlev_val_nbr_meas EQ 0)
+      alr_data->nc_data.rxlev_val = 0;
+    else
+    {
+      if ((signed short)(report->rxlev_val_acc) < 0)
+      report->rxlev_val_acc = 0;
+      alr_data->nc_data.rxlev_val = (UBYTE)(report->rxlev_val_acc / report->rxlev_val_nbr_meas);
+    }      
+
+    alr_data->nc_data.nbr_rcvd_blks = report->nbr_rcvd_blocks;
+    alr_data->nc_data.m_bep = alr_data->nc_data.cv_bep = 0;
+    if (report->mean_bep_block_num NEQ 0)
+    {      
+      alr_data->nc_data.m_bep = nc_map_mean_bep((ULONG) (report->mean_bep_block_acc/ report->mean_bep_block_num));      
+    }
+    if (report->cv_bep_block_num NEQ 0)
+    {    
+      alr_data->nc_data.cv_bep = nc_map_cv_bep ( (USHORT) (report->cv_bep_block_acc/ report->cv_bep_block_num));
+    }    
+  }
+#endif
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_convert_quality         |
++--------------------------------------------------------------------+
+
+  PURPOSE : Calculates the quality Value.
+
+*/
+
+LOCAL UBYTE nc_convert_quality (USHORT errors, USHORT total)
+{
+  USHORT quality;
+
+  if (total EQ 0)
+    quality = 0;
+  else
+    quality = (USHORT)((errors * 500) / total);
+
+  if (quality EQ 0)
+    return 0;          /* RX_QUAL_0 */
+
+  if (quality EQ 1)
+    return 1;          /* RX_QUAL_1 */
+
+  if (quality < 4)
+    return 2;          /* RX_QUAL_2 */
+
+  if (quality < 8)
+    return 3;          /* RX_QUAL_3 */
+
+  if (quality < 16)
+    return 4;          /* RX_QUAL_4 */
+
+  if (quality < 32)
+    return 5;          /* RX_QUAL_5 */
+
+  if (quality < 64)
+    return 6;          /* RX_QUAL_6 */
+
+  return 7;            /* RX_QUAL_7 */
+
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_release_bcch            |
++--------------------------------------------------------------------+
+
+PURPOSE : Check if we have read the BCCH of a ncell but RR has
+          not yet received the data because this cell has not
+          been reported to RR before.
+*/
+
+LOCAL void nc_release_bcch (void)
+{
+  GET_INSTANCE_DATA;
+  USHORT i;
+  USHORT c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+  /*
+   * for every ncell
+   */
+  for (i = 0; i < c_ba_arfcn; i++)
+  {
+    T_NC* pcell = &alr_data->nc_data.cell[i];
+
+    switch (pcell->status)
+    {
+      case FB_SB_SYNC_RR_NOT_INFORMED:
+        /*
+         * Reading of the BCCH of the neighbourcell is performed,
+         * but RR has been just informed with a measurement report
+         * about synchronisation.
+         */
+        if(pcell->mph_unitdata_ind NEQ NULL)
+        {
+          ALR_TRACE_NC ("send 34");
+
+          /*
+           * a system info type 3 or 4 message is stored.
+           * Send the message to RR and clear the internal variable.
+           */
+          PSENDX(RR, pcell->mph_unitdata_ind);
+          pcell->mph_unitdata_ind = NULL;
+        }
+
+        if(pcell->mph_unitdata_ind78 NEQ NULL)
+        {
+          ALR_TRACE_NC ("send 78");
+
+          /*
+           * a system info type 7 or 8 message is stored.
+           * Send the message to RR and clear the internal variable.
+           */
+          PSENDX(RR, pcell->mph_unitdata_ind78);
+          pcell->mph_unitdata_ind78 = NULL;
+        }
+
+        /*
+         * set status to FB_SB_SYNC, that means RR is completely informed.
+         */
+        nc_set_fb_sb_sync_initial (i);
+        break;
+
+      default:
+        break;
+    }
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_store_bcch              |
++--------------------------------------------------------------------+
+
+PURPOSE : Temporarily store BCCH data for ncell.
+
+*/
+
+LOCAL void nc_store_bcch (T_MPHC_DATA_IND* data_ind, USHORT index, UBYTE sys_info_78)
+{
+  GET_INSTANCE_DATA;
+  #define SYS_INFO_LEN 24
+
+  USHORT len_in_bits = SYS_INFO_LEN * BITS_PER_BYTE;
+  T_NC* pcell = &alr_data->nc_data.cell[index];
+  /*
+   * Allocate a SDU for sending later to RR
+   */
+  PALLOC_SDU (data_out, MPH_UNITDATA_IND, len_in_bits);
+
+  /*
+   * set length and offset, but cut IE and Pseudo Length
+   */
+  data_out->sdu.l_buf = (SYS_INFO_LEN - 2) * BITS_PER_BYTE;
+  data_out->sdu.o_buf = 1 * BITS_PER_BYTE;
+
+  /*
+   * copy content of the message
+   */
+  /*lint -e{419} (Warning -- Apparent data overrun)*/
+  memcpy (data_out->sdu.buf, &data_ind->l2_frame, SYS_INFO_LEN - 1);
+
+  /*
+   * set BCCH frequency of the message
+   */
+  data_out->arfcn = ARFCN_TO_G23(data_ind->radio_freq)&ARFCN_MASK;
+  data_out->fn    = data_ind->fn;
+
+  if (sys_info_78)
+  {
+    ALR_TRACE_NC ("store 78");
+
+    /*
+     * if it is a system info 7 or 8 message, free the previous
+     * stored message, if something is stored and store the new
+     * one.
+     */
+    if (pcell->mph_unitdata_ind78 NEQ NULL)
+    {
+      ALR_TRACE_NC ("store,free old 78");
+
+      PFREE(pcell->mph_unitdata_ind78);
+    }
+
+    pcell->mph_unitdata_ind78 = data_out;
+
+  }
+  else
+  {
+    ALR_TRACE_NC ("store 34");
+
+    /*
+     * if it is a system info 3 or 4 message, free the previous
+     * stored message, if something is stored and store the new
+     * one.
+     */
+    if (pcell->mph_unitdata_ind NEQ NULL)
+    {
+      ALR_TRACE_NC( "store,free old 34");
+
+      PFREE(pcell->mph_unitdata_ind);
+    }
+
+    pcell->mph_unitdata_ind = data_out;
+
+  }
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_sys_info_78_required    |
++--------------------------------------------------------------------+
+
+PURPOSE : The function checks whether sys info 7 or 8 are expected
+          and required.
+
+*/
+
+LOCAL UBYTE nc_sys_info_78_required (USHORT index)
+{
+  GET_INSTANCE_DATA;
+  if (alr_data->nc_data.cell[index].mph_unitdata_ind NEQ 0)
+  {
+    T_sdu * sdu = &alr_data->nc_data.cell[index].mph_unitdata_ind->sdu;
+    /*lint -e{415} -e{416} (Warning -- creation of out-of-bounds pointer/access of out-of-bounds pointer)*/
+    if ((sdu->buf[SI_CONTENTS_CS2] & ONLY_ACS) NEQ 0)
+      return TRUE;
+  }
+  return FALSE;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_stop_bcch               |
++--------------------------------------------------------------------+
+
+  PURPOSE : Stop a pending BCCH.
+
+*/
+
+LOCAL void nc_stop_bcch (USHORT index, UBYTE new_status)
+{
+  GET_INSTANCE_DATA;
+  /*
+   * L3 may avoid sending a stop message to terminate a NCELL_BCCH process
+   * if there no more pending request in L1
+   */
+
+  if (alr_data->nc_data.c_bcch_req > 0)
+  {
+    /*
+     * stop BCCH request in layer 1.
+     */
+    ma_nc_stop_ncell_bcch_req(alr_data->nc_data.cell[index].ba_arfcn);
+
+    /*
+     * decrement counter of pending requests
+     */
+    alr_data->nc_data.c_bcch_req--;
+  }
+
+  /*
+   * set new status
+   */
+  nc_set_status (index, new_status);
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_stop_sync               |
++--------------------------------------------------------------------+
+
+  PURPOSE : Stop a pending Sync request.
+
+*/
+
+LOCAL void nc_stop_sync (USHORT index, UBYTE new_status)
+{
+  GET_INSTANCE_DATA;
+  /*
+   * L3 may avoid sending a stop message to terminate a NCELL_SYNC process
+   * if there no more pending request in L1
+   */
+
+  if (alr_data->nc_data.c_sync_req > 0)
+  {
+    /*
+     * stop sync request in layer 1.
+     */
+    ma_nc_stop_ncell_sync_req (alr_data->nc_data.cell[index].ba_arfcn);
+
+    /*
+     * decrement counter of pending requests
+     */
+    alr_data->nc_data.c_sync_req--;
+    /*
+     * check whether the confirmation procedure is finished indirectly
+     */
+    if (alr_data->nc_data.c_sync_req EQ 0 AND
+        alr_data->nc_data.eotd_avail EQ FALSE AND
+        GET_STATE(STATE_NC_PROC) EQ NC_CONFIRM)
+    {
+      nc_enable_conf();
+    }
+  }
+
+  /*
+   * set new status
+   */
+  nc_set_status (index, new_status);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_clean_store_bcch        |
++--------------------------------------------------------------------+
+
+  PURPOSE : Clean a stored BCCH.
+
+*/
+
+LOCAL void nc_clean_store_bcch (USHORT index)
+{
+  GET_INSTANCE_DATA;
+  T_NC* pcell = &alr_data->nc_data.cell[index];
+  if (pcell->mph_unitdata_ind NEQ NULL)
+  {
+    ALR_TRACE_NC ("free 34");
+
+    /*
+     * a system info type 3 or 4 message is stored
+     * then free the message and clean the pointer.
+     */
+
+    PFREE(pcell->mph_unitdata_ind);
+    pcell->mph_unitdata_ind = NULL;
+
+  }
+
+  if(pcell->mph_unitdata_ind78 NEQ NULL)
+  {
+    ALR_TRACE_NC ("free 78");
+
+    /*
+     * a system info type 7 or 8 message is stored
+     * then free the message and clean the pointer.
+     */
+
+    PFREE(pcell->mph_unitdata_ind78);
+    pcell->mph_unitdata_ind78 = NULL;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_check_bsic              |
++--------------------------------------------------------------------+
+
+  PURPOSE : Check a base station identification code of a neighbourcell
+            The following return values are possible:
+
+            NC_CHECK_OK           : BSIC has not changed and is permitted.
+            NC_CHECK_NCC_FAILED   : NCC permitted check has failed
+            NC_CHECK_BSIC_CHANGED : a BSIC change has occured
+
+
+*/
+
+LOCAL UBYTE nc_check_bsic (USHORT index, UBYTE bsic)
+{
+  GET_INSTANCE_DATA;
+  /*
+   * check only the lowest 6 bits (= NCC + BCC)
+   */
+  bsic = (UBYTE)(bsic & ONLY_BSIC);
+
+  /*
+   * first check whether ncc is member of the ncc permitted field
+   */
+  if (!nc_ncell_in_plmn_permitted (bsic))
+    return NC_CHECK_NCC_FAILED;
+
+  /*
+   * no bsic stored until now.
+   */
+  if (alr_data->nc_data.cell[index].bsic EQ NOT_PRESENT_8BIT)
+    return NC_CHECK_OK;
+
+  /*
+   * check against BSIC changes
+   */
+  if (alr_data->nc_data.cell[index].bsic NEQ bsic)
+    return NC_CHECK_BSIC_CHANGED;
+
+  /*
+   * all checks passed
+   */
+  return NC_CHECK_OK;
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_check_new_ncc_permitted |
++--------------------------------------------------------------------+
+
+PURPOSE : Checks whether status transitions are needed after reception
+          of a changed NCC permitted field.
+
+*/
+
+GLOBAL void nc_check_new_ncc_permitted (UBYTE new_ncc_permitted)
+{
+  GET_INSTANCE_DATA;
+  USHORT i;
+  USHORT c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+  if (new_ncc_permitted NEQ alr_data->ncc_permitted)
+  {
+    /*
+     * a change has occured, so store new value and check all cells
+     */
+    alr_data->ncc_permitted = new_ncc_permitted;
+
+    for (i = 0; i < c_ba_arfcn; i++)
+    {
+      switch (alr_data->nc_data.cell[i].status)
+      {
+        case FB_SB_SYNC:
+        case FB_SB_SYNC_RR_NOT_INFORMED:
+        case READ_SB:
+        case READ_BCCH:
+        case IDLE_SYNC:
+        case READ_SB_BCCH:
+        case READ_BCCH_RR_NOT_INFORMED:
+          if (nc_ncell_in_plmn_permitted(alr_data->nc_data.cell[i].bsic) EQ FALSE)
+            nc_set_status (i, EXCLUDED);
+          break;
+
+        case READ_BCCH_PENDING:
+        case READ_BCCH_PENDING_RR_NOT_INFORMED:
+          if (nc_ncell_in_plmn_permitted(alr_data->nc_data.cell[i].bsic) EQ FALSE)
+            nc_set_status (i, EXCLUDED);
+          break;
+
+        case EXCLUDED:
+          /*
+           * give channel a new chance
+           */
+          nc_set_status (i, IDLE);
+          break;
+      }
+    }
+  }
+}
+
+#if !defined(DEFINE_OLD_NC_STATUS)
+LOCAL UBYTE nc_get_nc_status(UBYTE status)
+{
+  UBYTE st;
+
+  switch (status)
+  {
+  case  INACTIVE:st=0;break;
+  case  IDLE:st=1;break;
+  case  READ_BCCH:st=2;break;
+  case  FB_SB_SYNC:st=3;break;
+  case  FB_SB_FAILED:st=4;break;
+  case  READ_FB_SB:st=5;break;
+  case  READ_SB:st=6;break;
+  case  IDLE_SYNC:st=7;break;
+  case  EXCLUDED:st=8;break;
+  case  FB_SB_SYNC_RR_NOT_INFORMED:st=9;break;
+  case  READ_SB_BCCH:st=10;break;
+  case  READ_BCCH_PENDING:st=11;break;
+  case  READ_FB_SB_PENDING:st=12;break;
+  case  READ_SB_PENDING:st=13;break;
+  case  READ_SB_BCCH_PENDING:st=14;break;
+  case  READ_BCCH_RR_NOT_INFORMED:st=15;break;
+  case  READ_BCCH_PENDING_RR_NOT_INFORMED:st=16;break;
+  default:st=17;break;
+  }
+
+  return st;
+}
+#else  /* DEFINE_OLD_NC_STATUS */
+#define nc_get_nc_status(st) (((int)(st) >= 18) ? 18 : (st))
+#endif  /* DEFINE_OLD_NC_STATUS */
+
+#if !defined(NTRACE) && defined(TRACING)
+LOCAL const char * nc_get_nc_state_str(UBYTE status)
+{
+  return alr_nc_state_trc[nc_get_nc_status(status)];
+}
+#endif /* !NTRACE && TRACING */
+#if 0 /* not needed currently */
+#if defined(TRACING)
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_get_status              |
++--------------------------------------------------------------------+
+
+PURPOSE : The function returns the status for a channel.
+
+*/
+
+LOCAL UBYTE nc_get_status (USHORT index)
+{
+  /* use pointer to save time and ROM */
+  T_NC* pcell = &alr_data->nc_data.cell[index];
+
+  TRACE_USER_CLASS_P3 (TC_USER1, "NC%u[%d] %s",
+    index,
+    pcell->ba_arfcn EQ NOT_PRESENT_16BIT ? -1 : pcell->ba_arfcn&ARFCN_MASK,
+    nc_get_nc_state_str(pcell->status));
+
+  return pcell->status;
+}
+#endif  /* TRACING */
+#endif /* 0|1 */
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_set_status              |
++--------------------------------------------------------------------+
+
+PURPOSE : The function sets a new status for a channel. Depending on
+          the new status several variables which are not valid in
+          the new status are initialised to their default values.
+
+
+*/
+
+GLOBAL void nc_set_status (USHORT index, UBYTE new_status)
+{
+  GET_INSTANCE_DATA;
+  /* use pointer to save time and ROM */
+  T_NC* pcell = &alr_data->nc_data.cell[index];
+
+#if defined(TRACING)
+  TRACE_EVENT_P4 ("NC%u[%d] %s -> %s",
+    index,
+    pcell->ba_arfcn EQ NOT_PRESENT_16BIT ? -1 : pcell->ba_arfcn&ARFCN_MASK,
+    nc_get_nc_state_str(pcell->status),
+    nc_get_nc_state_str(new_status));
+#endif  /* TRACING */
+
+  switch (new_status)
+  {
+    case INACTIVE:
+      pcell->bsic            = NOT_PRESENT_8BIT;
+      pcell->frame_offset    = NOT_PRESENT_32BIT;
+      pcell->time_align      = NOT_PRESENT_32BIT;
+      pcell->last_rxlev      = 0;
+      pcell->c_rxlev         = NOT_PRESENT_8BIT;
+      pcell->rxlev_average   = 0;
+      memset (pcell->rxlev, 0, 5);
+      pcell->one_of_six = FALSE;
+      pcell->one_of_twelve   = FALSE;
+      pcell->c_attempt       = 0;
+      pcell->c_bcch          = C_INVALID_BCCH;
+      pcell->c_sync          = C_INVALID_SYNC;
+      pcell->tim_valid       = TV_INVALID_TIMING_INFO;
+      pcell->blocks_required = 0;
+      pcell->c_error         = 0;
+	  pcell->syn_failure_times= 0;
+      nc_clean_store_bcch (index);
+      break;
+
+    case IDLE:
+      pcell->bsic            = NOT_PRESENT_8BIT;
+/*      pcell->frame_offset    = 0;
+      pcell->time_align      = 0;
+      pcell->last_rxlev      = 0;  */
+      pcell->one_of_six      = FALSE;
+      pcell->one_of_twelve   = FALSE;
+      /*pcell->c_attempt       = 0;*/
+      pcell->c_bcch          = C_INVALID_BCCH;
+      pcell->c_sync          = C_INVALID_SYNC;
+      pcell->blocks_required = 0;
+      pcell->c_error         = 0;
+      nc_clean_store_bcch (index);
+      break;
+
+    case READ_FB_SB:
+    case READ_FB_SB_PENDING:
+      pcell->bsic            = NOT_PRESENT_8BIT;
+/*      pcell->frame_offset    = 0;
+      pcell->time_align      = 0;  */
+      pcell->last_rxlev      = 0;
+      pcell->c_bcch          = C_INVALID_BCCH;
+      pcell->c_sync          = C_INVALID_SYNC;
+      pcell->blocks_required = 0;
+      pcell->c_error         = 0;
+      nc_clean_store_bcch (index);
+      break;
+
+    case READ_BCCH:
+      pcell->last_rxlev      = 0;
+      /*pcell->c_attempt       = 0;*/
+      pcell->c_bcch          = C_INVALID_BCCH;
+      pcell->c_sync          = C_INVALID_SYNC;
+      pcell->c_error         = 0;
+      pcell->blocks_required = 0;
+      nc_clean_store_bcch (index);
+      break;
+    case READ_BCCH_RR_NOT_INFORMED:
+      pcell->last_rxlev      = 0;
+      pcell->c_bcch          = C_INVALID_BCCH;
+      pcell->c_sync          = C_INVALID_SYNC;
+      pcell->c_error         = 0;
+      pcell->blocks_required = 0;
+      nc_clean_store_bcch (index);
+      break;
+
+    case FB_SB_SYNC_RR_NOT_INFORMED:
+      pcell->last_rxlev      = 0;
+      pcell->c_bcch          = C_INVALID_BCCH;
+      pcell->c_sync          = C_INVALID_SYNC;
+      pcell->blocks_required = 0;
+      pcell->c_attempt       = 0;
+      pcell->c_error         = 0;
+      break;
+
+    case FB_SB_SYNC:
+		if((pcell->status == READ_FB_SB) || (pcell->status == READ_FB_SB_PENDING))
+			{
+			if(pcell->syn_failure_times > 0)
+				pcell->syn_failure_times --;
+			}
+      pcell->last_rxlev      = 0;
+      pcell->blocks_required = 0;
+      if (!pcell->one_of_six)
+        pcell->c_attempt       = 0;
+      pcell->c_error         = 0;
+      pcell->c_sync          = C_INVALID_SYNC;
+      pcell->tim_valid       = TV_VALID_TIMING_INFO;
+      nc_clean_store_bcch (index);
+      break;
+
+    case READ_SB:
+    case READ_SB_PENDING:
+      pcell->last_rxlev      = 0;
+      pcell->c_sync          = C_INVALID_SYNC;
+      pcell->blocks_required = 0;
+      /*pcell->c_attempt       = 0;*/
+      pcell->c_error         = 0;
+      nc_clean_store_bcch (index);
+      break;
+
+    case READ_SB_BCCH:
+    case READ_SB_BCCH_PENDING:
+      pcell->last_rxlev      = 0;
+      pcell->c_bcch          = C_INVALID_BCCH;
+      pcell->c_sync          = C_INVALID_SYNC;
+      pcell->blocks_required = 0;
+      pcell->c_error         = 0;
+      /*pcell->c_attempt       = 0;*/
+      nc_clean_store_bcch (index);
+      break;
+
+
+    case IDLE_SYNC:
+      pcell->last_rxlev      = 0;
+      pcell->c_bcch          = C_INVALID_BCCH;
+      pcell->one_of_six      = FALSE;
+      pcell->one_of_twelve   = FALSE;
+      pcell->c_attempt       = 0;
+      pcell->blocks_required = 0;
+      pcell->c_error         = 0;
+      pcell->c_sync          = alr_data->nc_data.c_nc_timer; /*TODO maybe move this to a function*/
+      nc_clean_store_bcch (index);
+      break;
+
+    case FB_SB_FAILED:
+		if((pcell->status == READ_FB_SB) || (pcell->status == READ_FB_SB_PENDING))
+			{
+				pcell->syn_failure_times ++;
+			}
+      pcell->bsic            = NOT_PRESENT_8BIT;
+      if (pcell->status EQ READ_FB_SB_PENDING)
+      {
+        pcell->frame_offset  = NOT_PRESENT_32BIT;
+        pcell->time_align    = NOT_PRESENT_32BIT;
+        pcell->tim_valid     = TV_INVALID_TIMING_INFO;
+      }
+      else
+        pcell->tim_valid     = TV_APPROX_TIMING_INFO;
+      pcell->last_rxlev      = 0;
+      pcell->c_bcch          = C_INVALID_BCCH;
+      pcell->blocks_required = 0;
+      pcell->c_error         = 0;
+      nc_clean_store_bcch (index);
+      break;
+
+    case EXCLUDED:
+      pcell->bsic            = NOT_PRESENT_8BIT;
+      pcell->frame_offset    = NOT_PRESENT_32BIT;
+      pcell->time_align      = NOT_PRESENT_32BIT;
+      pcell->one_of_six      = FALSE;
+      pcell->one_of_twelve   = FALSE;
+      pcell->last_rxlev      = pcell->rxlev_average; /* TODO maybe move this to a function */
+      pcell->c_attempt       = 0;
+      pcell->c_bcch          = C_INVALID_BCCH;
+      pcell->c_sync          = C_INVALID_SYNC;
+      pcell->tim_valid       = TV_INVALID_TIMING_INFO;
+      pcell->blocks_required = 0;
+      pcell->c_error         = 0;
+      pcell->syn_failure_times= 0;
+      nc_clean_store_bcch (index);
+      break;
+
+    case READ_BCCH_PENDING:
+    case READ_BCCH_PENDING_RR_NOT_INFORMED:
+      pcell->last_rxlev      = 0;
+      /*pcell->c_attempt       = 0;*/
+      pcell->c_bcch          = C_INVALID_BCCH;
+      pcell->c_sync          = C_INVALID_SYNC;
+      nc_clean_store_bcch (index);
+      break;
+  }
+
+  /*
+   * set new status
+   */
+  pcell->status           = new_status;
+}
+
+GLOBAL void nc_check_activity (void)
+{
+  GET_INSTANCE_DATA;
+  int i;
+  switch(GET_STATE(STATE_NC))
+  {
+    case NC_IDLE:
+      /* count number of reports */
+      alr_data->nc_data.c_reports++;
+
+      nc_rank_ncells   ();
+      nc_check_status  (CHECK_FOR_ACQUIRE_AND_BCCH_AND_FAIL);
+      nc_process_status();
+
+      if (first_period AND !first_l1_meas)
+      {
+        if (alr_data->nc_data.c_reports EQ alr_data->nc_data.max_reports OR
+            alr_data->nc_data.c_reports EQ alr_data->nc_data.max_reports - 1)
+        {
+          UBYTE all_sync = TRUE;
+          /*
+           * for every ncell
+           */
+          for (i = 0; i < alr_data->nc_data.c_ba_arfcn; i++)
+          {
+            if (alr_data->nc_data.cell[i].status EQ READ_BCCH_PENDING OR
+                alr_data->nc_data.cell[i].status EQ READ_BCCH_PENDING_RR_NOT_INFORMED
+#if (CHIPSET EQ 15) 
+/* For Locosto: Give an additional period if all ncells are not yet synchronized. Gives FTA 20.7 a better chance to pass */
+                OR alr_data->nc_data.cell[i].status EQ READ_FB_SB 
+                OR alr_data->nc_data.cell[i].status EQ READ_FB_SB_PENDING
+#endif                
+                )
+            {
+              /* not all needed SI are read yet */
+              all_sync = FALSE;
+              break;
+            }
+          }
+          if (!all_sync AND
+              alr_data->nc_data.c_reports EQ alr_data->nc_data.max_reports)
+          {
+            /* spend an additional reporting period to give FTA 20.7 a better chance to pass */
+            alr_data->nc_data.c_reports--;
+            first_period = FALSE;
+            ALR_TRACE_NC ("one additional period");
+          }
+          else if (all_sync AND
+                   alr_data->nc_data.c_reports EQ alr_data->nc_data.max_reports - 1)
+          {
+            /* skip an additional reporting period to give FTA 20.19 a better chance to pass */
+            alr_data->nc_data.c_reports++;
+            first_period = FALSE;
+            ALR_TRACE_NC ("one period skipped");
+          }
+        }
+      }
+      first_l1_meas = FALSE;
+
+#if defined(_SIMULATION_)
+      TRACE_EVENT_P2 ("c_reports=%u/%u",
+        alr_data->nc_data.c_reports, alr_data->nc_data.max_reports);
+#endif  /* WIN32 */
+
+      /* check if 5sec have passed, we then have to inform RR */
+      if (alr_data->nc_data.c_reports EQ alr_data->nc_data.max_reports)
+      {
+        USHORT index, average;
+        T_NC* pcell;
+        PALLOC (report, MPH_MEASUREMENT_IND);
+        memset (report, 0, sizeof (T_MPH_MEASUREMENT_IND));
+
+        first_period = FALSE;
+#ifdef GPRS
+        report->gprs_sync = NORMAL_MEAS_REP;
+#endif
+
+        report->arfcn = alr_data->serving_cell;
+
+        average = 0;
+        index = nc_get_index(alr_data->serving_cell);
+        if ( index NEQ NOT_PRESENT_16BIT )
+        {
+          pcell = &alr_data->nc_data.cell[index];
+          pcell->rxlev_average = 0;  /* Is this really needed? */
+          for (i = 0; i < 5; i++)
+            average += pcell->rxlev[i];
+        }
+
+        report->rx_lev_full = (UBYTE) (average / 5);
+        report->fn_offset = alr_data->nc_data.fn_offset;
+
+        alr_data->nc_data.c_reports                 = 0;
+
+        nc_build_rr_report (report);
+        ma_nc_report_res   (report);
+        nc_release_bcch    ();
+#if defined (REL99) && defined (TI_PS_FF_EMR)
+        alr_data->nc_data.si2q_per = (alr_data->nc_data.si2q_per +1)%6;
+#ifdef GPRS
+        if(gprs_check_read_si13_only())
+#endif
+        {
+        /*Periodic acquisition of SI-2quater every 30 sec, when it is
+          configured on EBCCH and when GPRS is not supported*/
+          if (alr_data->nc_data.si2q_per	EQ 0)
+          {
+            if ( (alr_data->nc_data.si2quater_status NEQ SI2QUATER_ABSENT) AND
+              (alr_data->nc_data.si2quater_pos EQ SI2QUATER_ON_EBCCH) )
+            {
+              ma_scell_mon_si2quater_ebcch();
+              alr_data->nc_data.si2quater_status = SI2QUATER_ACQ_PENDING ;
+            }
+          }
+        } 
+#endif
+      }
+      break;
+    case NC_DEDICATED:
+      nc_rank_ncells   ();
+      nc_check_status  (CHECK_FOR_ACQUIRE_AND_BCCH_AND_FAIL);
+      nc_process_status();
+      {
+        PALLOC(mph_measurement_ind, MPH_MEASUREMENT_IND);
+#ifdef GPRS
+        mph_measurement_ind->gprs_sync = NORMAL_MEAS_REP;
+#endif
+        nc_build_rr_report_dedi (mph_measurement_ind);
+        ma_nc_report_res        (mph_measurement_ind);
+      }
+      break;
+    default:
+      break;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_set_fb_sb_sync_initial  |
++--------------------------------------------------------------------+
+
+PURPOSE : Inital setting of status FB_SB_SYNC. Counter for SB
+          confirmation and BCCH re-reading are initialized.
+
+*/
+
+LOCAL void nc_set_fb_sb_sync_initial (USHORT index)
+{
+  GET_INSTANCE_DATA;
+  alr_data->nc_data.cell[index].c_bcch   = FIVE_MINUTES;
+
+  if(!alr_data->nc_data.eotd_avail)
+  {
+   /*round to next confirmation boundary */
+   if(alr_data->nc_data.c_nc_timer NEQ THIRTY_SECONDS)
+    alr_data->nc_data.cell[index].c_bcch += alr_data->nc_data.c_nc_timer;
+  }
+
+  nc_set_status (index, FB_SB_SYNC);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)              MODULE  : ALR_NC              |
+| STATE   : code                       ROUTINE : nc_set_fb_sb_failed |
++--------------------------------------------------------------------+
+
+PURPOSE : Set the status to FB_SB_FAILED, update the attempt counter
+          and set time until next attempt is started.
+
+*/
+
+LOCAL void nc_set_fb_sb_failed (USHORT index,
+                                UBYTE  c_sync)
+{
+  GET_INSTANCE_DATA;
+  alr_data->nc_data.cell[index].c_attempt++;
+  alr_data->nc_data.cell[index].c_sync = c_sync;
+  nc_set_status (index, FB_SB_FAILED);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103) MODULE  : ALR_NC                           |
+| STATE   : code          ROUTINE : nc_rxlev_sc_req                  |
++--------------------------------------------------------------------+
+
+PURPOSE : A new RXLEV value of the serving cell has been measured.
+          Inform GPL in case it is necessary.
+
+*/
+#ifdef GPRS
+
+LOCAL void nc_rxlev_sc_req (UBYTE rxlev)
+{
+  GET_INSTANCE_DATA;
+  if(GET_STATE (STATE_NC) EQ NC_IDLE)
+  {
+    PALLOC (rxlev_sc_req, TB_RXLEV_SC_REQ);
+
+    rxlev_sc_req->sc_rxlev = rxlev;
+
+    ma_nc_rxlev_sc_req (rxlev_sc_req);
+  }
+}
+
+#endif /* #ifdef GPRS */
+
+#if defined(_SIMULATION_)
+LOCAL void trace_nc(void)
+{
+  GET_INSTANCE_DATA;
+  char buf[80];
+  int  i, o;
+  T_NC* pcell;
+  o = sprintf (buf, "NC: ");
+
+  for (i=0,pcell = &alr_data->nc_data.cell[0]; i < alr_data->nc_data.c_ba_arfcn; i++,pcell++)
+  {
+    if(pcell->ba_arfcn EQ alr_data->serving_cell)
+    {
+      o += sprintf (buf+o, "%u[SC=%u]%u, ", i, pcell->ba_arfcn, pcell->ba_status);
+    }
+    else
+    {
+      o += sprintf (buf+o, "%u[%u]%u, ", i, pcell->ba_arfcn, pcell->ba_status);
+    }
+    if (o > 60)
+    {
+      TRACE_EVENT (buf);
+      o = sprintf (buf, "NC: ");
+    }
+  }
+  if (o>4)
+  {
+    buf[o-2]=0;
+    TRACE_EVENT (buf);
+  }
+}
+#endif  /* _SIMULATION_ */
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_check_new_strong_cell   |
++--------------------------------------------------------------------+
+
+  PURPOSE : Checks the New strong cell criteria
+
+*/
+
+LOCAL void nc_check_new_strong_cell(USHORT index, UBYTE o_1of6, 
+                                    UBYTE rxlev)
+{
+  GET_INSTANCE_DATA;
+  T_NC* pcell = &alr_data->nc_data.cell[index];
+
+  if((pcell->one_of_six ) AND (!o_1of6))
+  {
+    /* NCELL confirmation active. New 1of6 cell found */
+    if((pcell->rxlev_average > rxlev) AND
+       ((pcell->rxlev_average - rxlev ) >= 5))
+      pcell->new_strong_cell = TRUE;
+  }
+  else if ((pcell->one_of_six ) AND (o_1of6) AND
+           (pcell->status EQ READ_FB_SB) AND
+           (pcell->c_attempt EQ 0 ))
+  {
+    /* NCELL confirmation interrupted the sync of last 1of6 cell
+     * This has to be synchronized again
+     */
+    pcell->new_strong_cell = TRUE;
+  }
+
+  if(pcell->new_strong_cell)
+  {
+    alr_data->nc_data.new_strong_cell_detect = TRUE;
+    TRACE_EVENT_P1("[%d]New strong cell",pcell->ba_arfcn);
+  }
+
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103)       MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_handle_new_strong_cells |
++--------------------------------------------------------------------+
+
+  PURPOSE : Processes cell synchronisation.
+
+*/
+
+LOCAL void nc_handle_new_strong_cells(void)
+{
+  GET_INSTANCE_DATA;
+  USHORT i;
+  USHORT index;
+  UBYTE  first_sync_req = TRUE;
+  T_NC* pbsic = &alr_data->nc_data.cell[LAST_BSIC_REQ];
+
+  alr_data->nc_data.c_sync_intrupted = FALSE;
+
+  while (alr_data->nc_data.c_sync_req < MAX_L1_SYNC_CNT)
+  {
+    /*
+     * It is possible to send more sync requests to layer 1
+     */
+    USHORT  c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+    index = NOT_PRESENT_16BIT;
+
+    for (i = 0; i < c_ba_arfcn; i++)
+    {
+      /*
+       * search for "New strong cell" with the highest fieldstrength
+       */
+      T_NC* pcell = &alr_data->nc_data.cell[i];
+
+      if ((pcell->ba_arfcn NEQ pbsic->ba_arfcn) AND
+          (pcell->ba_arfcn NEQ alr_data->serving_cell) AND
+          (pcell->new_strong_cell))
+      {
+        switch (pcell->status)
+        {
+          case READ_FB_SB:
+            if (index EQ NOT_PRESENT_16BIT)
+              index = i;
+            else
+            {
+              if (pcell->rxlev_average >
+                  alr_data->nc_data.cell[index].rxlev_average)
+                index = i;
+            }
+            break;
+          default:
+            break;
+        }
+      }
+    }
+
+    if (index NEQ NOT_PRESENT_16BIT)
+    {
+
+      if(first_sync_req EQ TRUE) 
+      {
+        first_sync_req = FALSE;
+
+        if(alr_data->nc_data.c_sync_req > 0)
+        {
+
+          TRACE_EVENT("RE-SYNC interrupted");
+          alr_data->nc_data.c_sync_intrupted = TRUE;
+
+          nc_stop_all();
+
+          if(!alr_data->nc_data.c_sync_req)
+          {
+            alr_data->nc_data.tim_state = NC_CONF_PENDING;
+            SET_STATE(STATE_NC_PROC, NC_ACQUIRE);
+          }
+        }      
+      } /* first_sync_req */
+
+      /*
+       * Request synchronisation for this cell
+       */
+      nc_build_sync_req(index);
+      alr_data->nc_data.cell[index].new_strong_cell = FALSE;
+      TRACE_EVENT_P1("[%d]N_S_C sync req",alr_data->nc_data.cell[index].ba_arfcn);
+    }
+    else
+      break; /*while loop */
+  } /* while( c_sync_req < MAX_L1_SYNC_CNT) */
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT :                             MODULE  : ALR_NC             |
+| STATE   : code                        ROUTINE : nc_set_si4_si78    |
++--------------------------------------------------------------------+
+
+  PURPOSE : Replaces the common  code for SI4 and SI7-8.
+
+*/
+
+LOCAL void  nc_set_si4_si78 ( USHORT                  index,
+                              T_MPHC_NCELL_BCCH_IND  *data_ind,
+                              UBYTE                   sys_info_78)
+{
+  GET_INSTANCE_DATA;
+  ALR_TRACE_NC ("nc_set_si4_si78");
+#if defined(TRACING)
+    TRACE_EVENT_P4("NC%u[%d] BCCH ok %s",
+                     index,alr_data->nc_data.cell[index].ba_arfcn EQ NOT_PRESENT_16BIT ? -1 
+                    : alr_data->nc_data.cell[index].ba_arfcn&ARFCN_MASK, "%s",
+                      (sys_info_78) ? "si78" : "si4");
+#endif  /* TRACING */
+  /*
+   * additional cell selection info from sys info 7 or 8 is not necessary
+   */
+  if (alr_data->nc_data.cell[index].status EQ READ_BCCH_PENDING_RR_NOT_INFORMED)
+  {
+    /*
+     * store data if RR is not informed yet about synchronisation
+     */
+    nc_store_bcch((T_MPHC_DATA_IND *) data_ind, index, sys_info_78);
+    nc_set_status (index, FB_SB_SYNC_RR_NOT_INFORMED);
+  }
+  else
+  {
+    /*
+     * forward information to RR
+     */
+    ma_send_unitdata ((T_MPHC_DATA_IND *)data_ind);
+    nc_set_fb_sb_sync_initial (index);
+  }
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT :                     MODULE  : ALR_NC                     |
+| STATE   : code                ROUTINE : nc_highst_field_strng      |
++--------------------------------------------------------------------+
+
+  PURPOSE : Replaces the common  code of ' searching the candidate 
+            with the highest fieldstrength' from functions-
+            "nc_process_status_sync" and "nc_process_status_bcch".
+
+*/
+LOCAL void nc_highst_field_strng (USHORT *index, T_PRO_STA_TYPE  nc_pro_sta_type)
+{
+  GET_INSTANCE_DATA;
+  UBYTE  i;
+  USHORT c_ba_arfcn = alr_data->nc_data.c_ba_arfcn;
+  T_NC*  pbsic = &alr_data->nc_data.cell[LAST_BSIC_REQ];
+  ALR_TRACE_NC ("nc_highst_field_strng");
+  for (i = 0; i < c_ba_arfcn; i++)
+  {
+    /*
+     * search for the candidate with the highest fieldstrength
+     */
+    T_NC* pcell = &alr_data->nc_data.cell[i];
+
+    if ((pcell->ba_arfcn NEQ pbsic->ba_arfcn) AND
+        (pcell->ba_arfcn NEQ alr_data->serving_cell))
+    {
+      if((pcell->status EQ READ_FB_SB AND (nc_pro_sta_type EQ PRO_STA_SYNC)) OR 
+         ((pcell->status EQ READ_BCCH OR 
+           pcell->status EQ READ_BCCH_RR_NOT_INFORMED) AND (nc_pro_sta_type EQ PRO_STA_BCCH)))
+       {
+        if (*index EQ NOT_PRESENT_16BIT)
+          *index = i;
+        else
+        {
+         if (pcell->rxlev_average >
+             alr_data->nc_data.cell[*index].rxlev_average)
+           *index = i;
+        }
+      }
+    }
+  }
+}
+#if defined (REL99) && defined (TI_PS_FF_EMR)
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103) MODULE  : ALR_NC                           |
+| STATE   : code          ROUTINE : nc_fill_ncell_enh_meas_results                  |
++--------------------------------------------------------------------+
+
+PURPOSE : The purpose of this function is to handle all the specific requirements
+          for EMR - sorting according to priority as given in 5.08 V8.16.0, sec.8.4.8.1,
+          and scaling of rxlev values.
+*/
+LOCAL void nc_fill_ncell_enh_meas_results( T_MPH_MEASUREMENT_IND *p_rep)
+{
+  GET_INSTANCE_DATA;
+  T_enh_bin           sc_bin;
+  T_enh_bin           mband_bin[5]; /* 0 - 900, 1 - 1800, 2 - 400, 3 - 1900, 4 - 850*/
+  T_enh_bin           rest_bin;
+  UBYTE               i;  
+  T_NC                *pcell = alr_data->nc_data.cell;
+  T_enh_para_struct   *p_enh = &alr_data->nc_data.emr_data.enh_para;
+  
+  p_rep->ncells.no_of_ncells = 0;
+  memset (&sc_bin,0,sizeof (T_enh_bin));
+  memset(mband_bin, 0, 5 * sizeof(T_enh_bin) );
+  memset(&rest_bin,0, sizeof(T_enh_bin) );
+  /* Step 1: Sort cells into different bins - serving cell band bin,
+    non-serving cell band bin, and the rest which can contain invalid BSIC
+    cells*/
+  nc_sort_cells_into_bins( &sc_bin, mband_bin, &rest_bin);
+
+  /* Step 2: Fill the cells from each bin, after sorting in descending order
+     of RXLEV, in the order of : sc_bin, mband_bin and rest_bin.
+     Further number of cells from sc_bin and mband_bin is restricted by SERVING_BAND
+     and MULTIBAND reporting parameters*/
+  if (sc_bin.num_valid > 0)
+  {
+    nc_sort_and_store_meas_results(pcell, &sc_bin, p_enh->servingband_rep, p_rep);
+    /*remaining cells in sc bin apart from first servingband_rep number of cells,
+      will be filled into rest bin */
+    if (sc_bin.num_valid > p_enh->servingband_rep)
+      nc_add_to_rest(&rest_bin,&sc_bin,p_rep->ncells.no_of_ncells);
+  }    
+  /* Fill cells from multi band after sorting*/
+  for ( i = 0; i < MAX_NUM_BANDS; i++)    
+  {
+    if ( (p_rep->ncells.no_of_ncells < MAX_NUM_CELLS_IN_REPORT) AND
+         (mband_bin[i].num_valid > 0) )
+    {
+      nc_sort_and_store_meas_results(pcell, &mband_bin[i], p_enh->multiband_rep, p_rep);    
+      if (mband_bin[i].num_valid > p_enh->multiband_rep )
+        nc_add_to_rest(&rest_bin, &mband_bin[i], p_enh->multiband_rep );
+    }         
+  }
+  
+  /*Sort the cells in rest bin */
+  if ( (p_rep->ncells.no_of_ncells < MAX_NUM_CELLS_IN_REPORT ) AND
+       ( rest_bin.num_valid > 0) )
+       nc_sort_rest(p_rep, &rest_bin); 
+
+  /* This leaves us with final step in neighbour cell measurement reporting - scaling.*/
+  p_rep->scale_used = nc_scale_rxlev (p_enh->scale_order, 
+                                      p_rep->ncells.no_of_ncells,
+                                      p_rep->ncells.rx_lev);    
+
+  return;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103) MODULE  : ALR_NC                           |
+| STATE   : code          ROUTINE : nc_sort_cells_into_bins                  |
++--------------------------------------------------------------------+
+
+PURPOSE : The purpose of this function is to sort the cells into various
+          bins. This is the first step in handling reporting priority 
+          as given in 5.08 sec.8.4.8.1
+*/
+LOCAL void nc_sort_cells_into_bins( T_enh_bin *p_sbin,
+                                   T_enh_bin *p_mbin,
+                                   T_enh_bin *p_rbin)
+{
+  GET_INSTANCE_DATA;
+  UBYTE               i = 0;
+  UBYTE               j;
+  USHORT              arfcn1;
+  UBYTE               bsic1;  
+  UBYTE               band;
+  UBYTE               sc_band;
+  UBYTE               rth;  
+  BOOL                bsic_found;
+  T_NC                *pcell = alr_data->nc_data.cell;
+  T_enh_para_struct   *p_enh = &alr_data->nc_data.emr_data.enh_para;
+
+  sc_band = get_band_index_for_emr (alr_data->serving_cell );
+  p_rbin->num_valid = 0;
+  p_mbin->num_valid = 0;
+  p_sbin->num_valid = 0;
+
+  while ( pcell[i].ba_arfcn NEQ NOT_PRESENT_16BIT ) 
+  {
+    /* Do the rest only if it is in BA list and it's a valid value of BSIC*/
+    if (( pcell[i].ba_status EQ IN_BA ) AND ( pcell[i].bsic NEQ NOT_PRESENT_8BIT ) 
+         AND 
+         (( pcell[i].ba_arfcn NEQ alr_data->serving_cell )
+           OR
+           (( pcell[i].ba_arfcn EQ alr_data->serving_cell ) AND ( alr_data->nc_data.sc_included EQ TRUE )) 
+         )
+       )
+    {
+      arfcn1 = pcell[i].ba_arfcn;
+      bsic1  = pcell[i].bsic;      
+      bsic_found  = FALSE;
+      for ( j = 0; j < p_enh->num_valid_cells; j++ )
+      {
+        if ( p_enh->enh_cell_list[j].arfcn EQ arfcn1 ) 
+        {
+          if (p_enh->enh_cell_list[j].bsic EQ bsic1 )
+          {
+              /*Find the band of this arfcn*/
+            band = get_band_index_for_emr(arfcn1);
+            rth = p_enh->enh_rep_data[band].rep_threshold; 
+            if (band EQ sc_band )
+            {
+              /* Apply the threshold criteria for serving band*/
+              if ( rth NEQ REP_THRESHOLD_INF )                  
+              {
+                if((rth EQ REP_THRESHOLD_NONE) OR (pcell[i].rxlev_average > (rth * 6) ) )         
+                {
+                  p_sbin->index[p_sbin->num_valid] = i;
+                  p_sbin->nc_index[p_sbin->num_valid] = j;
+                  p_sbin->priority[p_sbin->num_valid++] = p_enh->enh_cell_list[j].rep_priority;
+                }      
+                else
+                {
+                  p_rbin->index[p_rbin->num_valid] = i;
+                  p_rbin->nc_index[p_rbin->num_valid] = j;
+                  p_rbin->priority[p_rbin->num_valid++] = p_enh->enh_cell_list[j].rep_priority;
+                }
+              } /*otherwise report-never*/            
+            } /* otherwise cell in non-serving band*/
+            else
+            {
+               /* Apply the threshold criteria for this band*/
+              if ( rth NEQ REP_THRESHOLD_INF )                  
+              {
+                if((rth EQ REP_THRESHOLD_NONE) OR (pcell[i].rxlev_average > (rth * 6) ) )
+                {
+                  p_mbin[band].index[p_mbin[band].num_valid] = i;
+                  p_mbin[band].nc_index[p_mbin[band].num_valid] = j;
+                  p_mbin[band].priority[p_mbin[band].num_valid++] = p_enh->enh_cell_list[j].rep_priority;
+                }                  
+                else
+                {
+                  p_rbin->index[p_rbin->num_valid] = i;
+                  p_rbin->nc_index[p_rbin->num_valid] = j;
+                  p_rbin->priority[p_rbin->num_valid++] = p_enh->enh_cell_list[j].rep_priority;
+                }                  
+              } /*otherwise report never*/            
+            } 
+            bsic_found = TRUE;
+            break;
+          } /* end of if on 'bsic1'*/                      
+        } /* end of if on 'arfcn1'*/
+      } /*end of loop on 'j'*/
+      
+      /* If there's no cell with the given BSIC, then it falls under Invalid BSIC category 
+         */
+      if ( bsic_found EQ FALSE ) 
+      {
+        /*check whether Invalid BSIC reporting is enabled or not and NCC part is permitted or not*/
+        if ( (p_enh->inv_bsic_enabled EQ TRUE  ) AND
+             ( ((p_enh->ncc_permitted) & (ncc_bit_mask[((bsic1 >> 3) & BIT_012)])) NEQ 0) )
+        {
+            /*put it in rest bin*/
+            p_rbin->index[p_rbin->num_valid] = i;  
+            p_rbin->nc_index[p_rbin->num_valid] = NOT_PRESENT_8BIT; /*Indicates that this is an invalid BSIC cell*/
+            p_rbin->priority[p_rbin->num_valid++] = REP_PRIOR_HIGH;
+        }
+      }      
+    } /* if ba_status */
+    i++;
+  } /* end of while */
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103) MODULE  : ALR_NC                           |
+| STATE   : code          ROUTINE : get_band_index_for_emr                  |
++--------------------------------------------------------------------+
+
+PURPOSE : This is implementation specific function. This is used to
+          get index into emr reporting data (reporting threshold and
+          offset) array, which is band specific.
+*/
+LOCAL UBYTE get_band_index_for_emr (USHORT arfcn)
+{
+  
+  if ( INRANGE(LOW_CHANNEL_900, arfcn, HIGH_CHANNEL_900) )
+  {
+    return 0;
+  }
+  else if ( INRANGE(LOW_CHANNEL_1800, arfcn, HIGH_CHANNEL_1800))
+  {
+    return 1;
+  }
+  else if (INRANGE(LOW_CHANNEL_1900, arfcn, HIGH_CHANNEL_1900))
+  {
+    return 3;
+  }
+  else if ( INRANGE(LOW_CHANNEL_850, arfcn, HIGH_CHANNEL_850))
+  {
+    return 4;
+  }
+  else
+  {
+    return 2;
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103) MODULE  : ALR_NC                           |
+| STATE   : code          ROUTINE : nc_sort_and_store_meas_results                  |
++--------------------------------------------------------------------+
+
+PURPOSE : This function sorts the cells collected in each bin, in
+          descending order of RXLEV and then fills it into the report
+          that has to be sent to RR.
+*/
+LOCAL void nc_sort_and_store_meas_results(T_NC *pcell, T_enh_bin *p_bin, UBYTE nbr_rpt, 
+                                          T_MPH_MEASUREMENT_IND *p_rep)
+{
+  UBYTE     n = p_rep->ncells.no_of_ncells;
+  UBYTE     i;
+  UBYTE     j;
+  UBYTE     max_rxlev;
+  UBYTE     k;
+
+
+
+  
+  for (i = 0; i < (p_bin->num_valid ) ; i++)
+  {
+    if ( (n < MAX_NUM_CELLS_IN_REPORT) AND (nbr_rpt > 0) )
+    {
+      max_rxlev = pcell[p_bin->index[i]].rxlev_average;
+      k = i;
+      for ( j = i+1; j < p_bin->num_valid ; j++ )
+      {
+        if ( pcell[p_bin->index[j]].rxlev_average > max_rxlev )
+        {
+          k = j; 
+          max_rxlev = pcell[p_bin->index[j]].rxlev_average;
+        }
+      }
+      p_rep->ncells.arfcn[n] = pcell[p_bin->index[k]].ba_arfcn;
+      p_rep->ncells.bsic[n] = pcell[p_bin->index[k]].bsic;
+      p_rep->ncells.rx_lev[n] = pcell[p_bin->index[k]].rxlev_average;
+      p_rep->ncells.time_alignmt[n] = pcell[p_bin->index[k]].time_align;
+      p_rep->ncells.frame_offset[n] = pcell[p_bin->index[k]].frame_offset;
+      p_rep->nc_index[n]  = p_bin->nc_index[k];
+      /*swap the contents to get the information in sorted form*/
+      if ( k NEQ i)
+        nc_swap_bin_content (p_bin, i,k);    
+      n++;
+      nbr_rpt--;
+    }
+    else
+      break;
+  }
+  p_rep->ncells.no_of_ncells = n;
+  return;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103) MODULE  : ALR_NC                           |
+| STATE   : code          ROUTINE : nc_add_to_rest                  |
++--------------------------------------------------------------------+
+
+PURPOSE : This function updates the rest bin by appending the left out
+          cells in the other bins. These may also have to be reported
+          along with the cells in rest bin.
+*/
+LOCAL void nc_add_to_rest(T_enh_bin *p_r, T_enh_bin *p_b, UBYTE start_index)
+{
+  UBYTE     i;
+
+  for ( i = start_index; i < p_b->num_valid ; i++ )
+  {
+    p_r->index[p_r->num_valid] = p_b->index[i];
+    p_r->nc_index[p_r->num_valid] = p_b->nc_index[i];
+    p_r->priority[p_r->num_valid++] = p_b->priority[i];
+  }  
+  return;
+}
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103) MODULE  : ALR_NC                           |
+| STATE   : code          ROUTINE : nc_scale_rxlev                  |
++--------------------------------------------------------------------+
+
+PURPOSE : This function performs the scaling of RXLEV.
+*/
+LOCAL UBYTE nc_scale_rxlev (UBYTE scale, UBYTE no_of_cells, UBYTE *rx_lev)
+{
+  GET_INSTANCE_DATA;
+  UBYTE     i;
+    /*If scaling is automatic, then we find the scaling as below:
+     If the maximum RXLEV is greater than 63 (MAX_RXLEV), then we add 10dB
+     and check whether it falls into the range after scaling*/
+  /* Note: The assumption is L1 reports values in the following way -
+     if actual value of rxlev (x) is between y and y+1 dBm, then the reported value
+     is 110+x rounded off to next integer. */
+  if ( scale EQ SCALE_AUTO )
+  {
+    UBYTE     max = alr_data->nc_data.rxlev_val; /*need to scale serving cell RXLEV also*/        
+    for ( i = 0; i < no_of_cells ; i++ )
+    {
+      if (rx_lev[i] > max )
+        max = rx_lev[i];
+    }
+    /*if ( (max > 63 ) AND ( (max -10) < 64) )*/
+    if(max > 63 ) 
+    {
+      /*even if the max value is greater than 73, we still scale by 10 so that atleast
+      rxlev values of some other cells will come into range*/
+      scale = 10;
+    }
+    else
+      scale = 0;
+  }
+  else
+    scale = scale * 10;
+
+  /*Apply the scale to the values to be reported*/
+  alr_data->nc_data.rxlev_val -= scale;
+  for ( i = 0; i < no_of_cells ; i++ )
+  {
+    if (rx_lev[i] > scale )
+      rx_lev[i] -= scale;
+    else
+      rx_lev[i] = 0;
+    if (rx_lev[i] > 63 )
+      rx_lev[i] = 63;
+  }
+  return (scale/10);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103) MODULE  : ALR_NC                           |
+| STATE   : code          ROUTINE : nc_fill_serv_cell_enh_meas_results                  |
++--------------------------------------------------------------------+
+
+PURPOSE : This function fills the serving cell measurement results into
+          the report that is sent to RR.
+*/
+LOCAL void nc_fill_serv_cell_enh_meas_results(T_MPH_MEASUREMENT_IND *p_rep)
+{
+  GET_INSTANCE_DATA;
+  p_rep->rxlev_val = alr_data->nc_data.rxlev_val;
+  p_rep->mean_bep = alr_data->nc_data.m_bep;
+  p_rep->cv_bep = alr_data->nc_data.cv_bep;
+  p_rep->nbr_rcvd_blks = alr_data->nc_data.nbr_rcvd_blks;
+  p_rep->dtx = alr_data->nc_data.act_dtx;
+  p_rep->rx_qual_full = alr_data->nc_data.rxqual_full;
+  p_rep->valid = TRUE;  
+  p_rep->arfcn = alr_data->serving_cell;
+  p_rep->fn_offset = 103;   /* average of SDCCH/FACCH */
+  p_rep->dtx = alr_data->nc_data.act_dtx;
+  p_rep->rx_lev_full = (UBYTE)alr_data->nc_data.rxlev_full;
+  if (p_rep->rx_lev_full > 63)
+    p_rep->rx_lev_full = 63;
+  p_rep->rx_lev_sub = (UBYTE)alr_data->nc_data.rxlev_sub;
+  if (p_rep->rx_lev_sub > 63)
+    p_rep->rx_lev_sub = 63;  
+  p_rep->rx_qual_sub = alr_data->nc_data.rxqual_sub;
+  p_rep->otd = alr_data->nc_data.tav;
+  return;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103) MODULE  : ALR_NC                           |
+| STATE   : code          ROUTINE : nc_sort_rest                  |
++--------------------------------------------------------------------+
+
+PURPOSE : This function sorts cells in the rest bin which may contain both valid and 
+  invalid BSIC cells. Here we use the reporting offset along with measured RXLEV,
+  for sorting. According to 5.08, sec.8.4.8.1 we need to find those cells whose sum of 
+  RXLEV and xxx_reporting_offset is maximum. This can be acheived by sorting the cells
+  in the order of their rxlevm, where rxlevm = rxlev + offset.
+*/
+LOCAL void nc_sort_rest(T_MPH_MEASUREMENT_IND *p_rep, T_enh_bin *p_bin)
+{
+  GET_INSTANCE_DATA;
+  UBYTE                 n = p_rep->ncells.no_of_ncells;    
+  UBYTE                 j;
+  UBYTE                 max_rxlevm;
+  UBYTE                 band;
+  UBYTE                 rxlevm;
+  UBYTE                 k;  
+  ULONG                 xtra_cells_bmp = 0;
+  UBYTE                 i;
+  T_NC                  *pcell = alr_data->nc_data.cell;
+  T_enh_para_struct     *p_enh = &alr_data->nc_data.emr_data.enh_para;  
+  
+  for (i = 0; i < p_bin->num_valid ; i++)
+  {
+    if ( n < MAX_NUM_CELLS_IN_REPORT ) 
+    {
+      band = get_band_index_for_emr (pcell[p_bin->index[i]].ba_arfcn);
+      max_rxlevm = pcell[p_bin->index[i]].rxlev_average + 
+        (p_enh->enh_rep_data[band].rep_offset * 6) ;
+      k = i;      
+      for ( j = i+1; j < p_bin->num_valid ; j++ )
+      {
+        band = get_band_index_for_emr (pcell[p_bin->index[j]].ba_arfcn);
+        rxlevm = pcell[p_bin->index[j]].rxlev_average +
+          (p_enh->enh_rep_data[band].rep_offset * 6) ;
+        if ( rxlevm > max_rxlevm )
+        {
+          k = j;
+          max_rxlevm = rxlevm;            
+        }
+      }          
+      
+      /*When reduced reporting is enabled we have to report low priority cell once
+      in 4 reporting periods. The RXLEV then should be average of previous two periods*/
+      
+      j = p_bin->index[k];
+      /*swap the contents of rest_bin to push max in this iteration out of 
+      next search*/
+      if ( k NEQ i)      
+        nc_swap_bin_content (p_bin, i,k);           
+      k = i;
+      
+      if ( (pcell[j].one_of_six NEQ TRUE ) AND
+           (p_enh->rep_rate EQ REDUCED_REP_RATE) AND 
+           (p_bin->priority[k] EQ REP_PRIOR_NORM ))
+      {          
+        rxlevm = (pcell[j].rxlev_average + pcell[j].last_rxlev) >> 1; /*division by 2*/    
+        pcell[j].last_rxlev = pcell[j].rxlev_average;
+        pcell[j].rxlev_average = rxlevm;
+        xtra_cells_bmp |= (1<<k); /*The lower index, has the highest rxlev due to sorting done above
+                                    This ensures we don't need to sort again*/                  
+      }
+      else        
+      {
+        p_rep->ncells.arfcn[n] = pcell[j].ba_arfcn;
+        p_rep->ncells.bsic[n] = pcell[j].bsic;
+        p_rep->ncells.rx_lev[n] = pcell[j].rxlev_average;
+        p_rep->ncells.time_alignmt[n] = pcell[j].time_align;
+        p_rep->ncells.frame_offset[n] = pcell[j].frame_offset;
+        p_rep->nc_index[n] = p_bin->nc_index[k];
+        /*Verify whether this cell is one of six strongest and 
+          it has a Invalid BSIC to set the bsic_seen value*/
+        if ( (p_bin->nc_index[k] EQ NOT_PRESENT_8BIT ) AND
+             (pcell[j].one_of_six EQ TRUE) )
+             p_rep->bsic_seen = TRUE; 
+        n++;
+      }      
+      
+    } /*end of if 'n'*/     
+  } /*end of for 'i'*/
+  
+    /*In case there are any low priority cells that hadn't got a chance above,
+  we can report these cells here*/          
+  j=0;
+  while ( (n < MAX_NUM_CELLS_IN_REPORT) AND (xtra_cells_bmp NEQ 0) )
+  {
+    /*include these extra cells also in the report, first all those
+      whose inclusion is due*/
+    k = p_bin->index[j];
+    if ( ((xtra_cells_bmp >>j) & 0x00000001) EQ TRUE )
+    {      
+      p_rep->ncells.arfcn[n] = pcell[k].ba_arfcn;
+      p_rep->ncells.bsic[n] = pcell[k].bsic;
+      p_rep->ncells.rx_lev[n] = pcell[k].rxlev_average;
+      p_rep->ncells.time_alignmt[n] = pcell[k].time_align;
+      p_rep->ncells.frame_offset[n] = pcell[k].frame_offset;
+      p_rep->nc_index[n]  = p_bin->nc_index[j];
+      xtra_cells_bmp &= (~ (ULONG)((1<<j) )); /*resets the bit for location p*/
+      n++;
+    }
+    j++;
+  }          
+  p_rep->ncells.no_of_ncells = n;  
+  return;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6103) MODULE  : ALR_NC                           |
+| STATE   : code          ROUTINE : nc_swap_bin_content                  |
++--------------------------------------------------------------------+
+
+PURPOSE : 
+*/
+LOCAL void nc_swap_bin_content (T_enh_bin *p_bin, UBYTE i, UBYTE j )
+{
+  UBYTE     temp;
+
+  temp = p_bin->index[i];
+  p_bin->index[i] = p_bin->index[j];
+  p_bin->index[j] = temp;
+  temp = p_bin->nc_index[i];
+  p_bin->nc_index[i] = p_bin->nc_index[j];
+  p_bin->nc_index[j] = temp;
+  temp = p_bin->priority[i];
+  p_bin->priority[i] = p_bin->priority[j];
+  p_bin->priority[j] = temp;
+
+  return;
+}
+
+
+/*##############################################################################
+  Refer sec.8.2.5 of 5.08 for mapping of mean and cv BEP values.
+  Refer L1-interface documents for formats (F1.31 and F3.13) description
+  An example is given at the end of these functions to illustrate the algorithm
+  given here for conversion from these formats to a format for L23 processing
+  #############################################################################*/
+/*
++------------------------------------------------------------------------------
+| Function    : nc_map_mean_bep
++------------------------------------------------------------------------------
+| Description : This function is for mapping the measured and scaled BEP values
+|               to the corresponding enums as defined in 5.08. The mapping table,
+|               it's size are constants and the value that needs to be mapped is passed as 
+|               input parameters.The function returns the mapped value .  
++------------------------------------------------------------------------------
+*/
+LOCAL UBYTE nc_map_mean_bep(ULONG value)
+{
+  UBYTE i=0;
+  
+  TRACE_FUNCTION( "nc_map_mean_bep" );
+  while( i < MAX_MEAN_BEP_VAL )
+  {
+    if( value >= mbep_map[i] )
+      break;
+    i++;
+    if(i EQ MAX_MEAN_BEP_VAL)
+      return i-1; /* Any value lower than the lowest is mapped to
+                     the last enum value '31'*/    
+  }
+  return i;
+}
+
+/*
++------------------------------------------------------------------------------
+| Function    : nc_map_cv_bep
++------------------------------------------------------------------------------
+| Description : This function is for mapping the measured and scaled BEP values
+|               to the corresponding enums as defined in 5.08. The mapping table,
+|               it's size are constants and the value that needs to be mapped is passed as 
+|               input parameters. 
++------------------------------------------------------------------------------
+*/
+LOCAL UBYTE nc_map_cv_bep(USHORT value)
+{
+  UBYTE i=0;
+  
+  TRACE_FUNCTION( "nc_map_cv_bep" );
+  while( i < MAX_CV_BEP_VAL )
+  {
+    if( value >= cvbep_map[i] )
+      break;
+    i++;
+    if(i EQ MAX_CV_BEP_VAL)
+    return i-1; /* Any value lower than the lowest is mapped to
+                     the last enum value '7'*/
+  }
+  return i;
+}
+
+
+
+/*########### E X A M P L E for FORMAT F8.8 ##########
+FX.Y format means: 
+X MSB bits dedicated to integer part
+Y LSB bits are dedicated to the floating part
+So for example with F8.8, you need to divide the 16 bits word by 2^8 to have the 
+equivalent floating value
+
+Example
+bep = 0x1234 (4660)  F8.8 encoded
+then bep = 4660 / 2^8 = 18,203125... 
+
+The mapping table given by "cvbep_map" contains the actual values
+multiplied by 2^8
+while the mapping table given by "mbep_map" contains the actual values
+multiplied by 2^26
+#####################################################################*/
+
+#endif
+
+#if defined (TI_PS_FF_RTD) AND defined (REL99)
+
+/*
++------------------------------------------------------------------------------
+| Function    : nc_sync_fn_offset_calculation
++------------------------------------------------------------------------------
+| Description : This function will calculate Fn_offset for a given RTD value.
++------------------------------------------------------------------------------
+*/
+
+LOCAL UINT nc_sync_fn_offset_calculation(USHORT rtd_value)
+{
+  if((rtd_value & 0x8000) EQ 1) 
+    return (UINT)(rtd_value / NUM_OF_TDMA_FRAMES);
+  else
+  {
+    rtd_value &= RTD_12BIT_EXTRACT;
+    return (UINT)(rtd_value / NUM_OF_TDMA_FRAMES);
+  }
+}
+
+/*
++------------------------------------------------------------------------------
+| Function    : nc_sync_time_alignment_calculation
++------------------------------------------------------------------------------
+| Description : This function will calculate time_alignment for a RTD value
+|               given in units of 1/64 TDMA frame.
++------------------------------------------------------------------------------
+*/
+
+LOCAL UINT nc_sync_time_alignment_calculation(USHORT rtd_value)
+{
+  UBYTE  frame_offset;
+  if((rtd_value & 0x8000) EQ 1)
+  {
+    frame_offset = nc_sync_fn_offset_calculation(rtd_value);
+    return (UINT)((rtd_value - (frame_offset * NUM_OF_TDMA_FRAMES))*MAX_NUM_OF_QBITS/NUM_OF_TDMA_FRAMES);
+  }
+  else
+  {
+    rtd_value &= RTD_12BIT_EXTRACT;
+    frame_offset = nc_sync_fn_offset_calculation(rtd_value);
+    return (UINT)((rtd_value - (frame_offset * NUM_OF_TDMA_FRAMES))*MAX_NUM_OF_QBITS/NUM_OF_TDMA_FRAMES);
+  }
+}
+#endif /* #if defined (TI_PS_FF_RTD) AND defined (REL99) */
+
+#ifdef TI_PS_FF_QUAD_BAND_SUPPORT
+LOCAL BOOL nc_compare_bsic_std (UBYTE bsic_std)
+{
+  BOOL match_std = TRUE;
+  switch (std)
+  {
+    case STD_900:
+    case STD_EGSM:
+    case STD_1900:
+    case STD_1800:
+    case STD_850:
+      if (bsic_std EQ std)
+        match_std = FALSE;
+      break;
+    case STD_DUAL:
+      if ((bsic_std EQ STD_900) OR (bsic_std EQ STD_1800) OR (bsic_std EQ STD_DUAL))
+        match_std = FALSE;
+      break;
+    case STD_DUAL_EGSM:
+      if ((bsic_std EQ STD_EGSM) OR (bsic_std EQ STD_1800) OR (bsic_std EQ STD_DUAL_EGSM))
+        match_std = FALSE;
+      break;
+    case STD_DUAL_US:
+      if ((bsic_std EQ STD_850) OR (bsic_std EQ STD_1900) OR (bsic_std EQ STD_DUAL_US))
+        match_std = FALSE;
+      break;
+    case STD_850_1800:
+      if ((bsic_std EQ STD_850) OR (bsic_std EQ STD_1800) OR (bsic_std EQ STD_850_1800))
+        match_std = FALSE;
+      break;
+    case STD_900_1900:
+      if ((bsic_std EQ STD_EGSM) OR (bsic_std EQ STD_1900) OR (bsic_std EQ STD_900_1900))
+        match_std = FALSE;
+      break;
+    case STD_850_900_1800:
+      if ((bsic_std EQ STD_EGSM) OR (bsic_std EQ STD_850) OR (bsic_std EQ STD_1800) OR (bsic_std EQ STD_850_900_1800))
+        match_std = FALSE;
+      break;
+    case STD_850_900_1900:
+      if ((bsic_std EQ STD_EGSM) OR (bsic_std EQ STD_850) OR (bsic_std EQ STD_1900) OR (bsic_std EQ STD_850_900_1900))
+        match_std = FALSE;
+      break;
+    default:
+      TRACE_EVENT_P1 ("Invalid std value in nc_compare_bsic_std %d", std);
+      break;
+  }
+  return match_std;
+}
+#endif
+
+#endif