FreeCalypso > hg > fc-magnetite
diff src/g23m-gsm/dl/dl.h @ 104:27a4235405c6
src/g23m-gsm: import from LoCosto source
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Tue, 04 Oct 2016 18:24:05 +0000 |
| parents | |
| children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/g23m-gsm/dl/dl.h Tue Oct 04 18:24:05 2016 +0000 @@ -0,0 +1,1278 @@ +/* ++----------------------------------------------------------------------------- +| Project : GSM-PS +| Modul : DL ++----------------------------------------------------------------------------- +| Copyright 2002 Texas Instruments Berlin, AG +| All rights reserved. +| +| This file is confidential and a trade secret of Texas +| Instruments Berlin, AG +| The receipt of or possession of this file does not convey +| any rights to reproduce or disclose its contents or to +| manufacture, use, or sell anything it may describe, in +| whole, or in part, without the specific written consent of +| Texas Instruments Berlin, AG. ++----------------------------------------------------------------------------- +| Purpose : Definitions for the Protocol Stack Entity +| Data Link Layer ++----------------------------------------------------------------------------- +*/ + +#ifndef __DL_H__ +#define __DL_H__ + +#ifdef TI_PS_HCOMM_CHANGE +#include "cl_hComm_handle.h" +#endif + +#if !defined(_SIMULATION_) && defined(WIN32) +#define _SIMULATION_ +#endif /* !_SIMULATION_ && WIN32 */ + +#if defined (_SIMULATION_) +#if defined(DL_2TO1) +#include <p_8010_148_l1test_sap.h> +#endif /* DL_2TO1 */ +#else /* _SIMULATION_ */ +#if !defined(_TARGET_) +#define _TARGET_ +#endif /* !_TARGET_ */ +#endif /* _SIMULATION_ */ + +/* + * the following defines have an impact on the behaviour of the layer 2 + */ +/* + * DL_TRACE_ENABLED + * is set : Enables the trace feature (buffered or immediately trace) + * isīnt set: Disables the trace feature + */ +#define DL_TRACE_ENABLED + +/* + * DL_IMMEDIATE_TRACE + * operates only with enabled trace feature! + * is set : Enables unbuffered trace. Write out the trace immediately without + * buffering (or rather delayed by signalling to itself while the MS + * is in interrupt context state). + * isīnt set: Enables buffered trace (write out in idle mode only) + * Attention: Due to the interrupt context of the uplink and downlink trace + this feature requires very fast trace capability. The normal trace + transfer rate of 115200 Baud is not sufficient! + */ +#define DL_IMMEDIATE_TRACE + +/* + * DISABLE_MEASREPORT_TRACE + * operates only with enabled buffered trace! + * is set : Disables trace of measurement reports + * isīnt set: Normal trace of measurement reports +#define DISABLE_MEASREPORT_TRACE + */ +/* + * DISABLE_EMPTY_UI + * operates only with enabled buffered trace! + * is set : Disables trace of empty frames + * isīnt set: Normal trace of empty frames + */ +#define DISABLE_EMPTY_UI + +/* + * DELAYED_RELEASE_IND + * is set : Delayed release indication after reception of DISC to enable + * layer 1 the transmission of the UA acknowledge (After sent of the + * release indication to RR, RR stops the dedicated mode in layer 1). + * During the delay, DL sends only dummy frames for some uplink + * opportunities (see DL_FACCH_RELEASE_DELAY_VALUE and + * DL_SDCCH_RELEASE_DELAY_VALUE). The delay stops after the given + * count of uplinked dummy frames or at a downlink on this channel. + * isīnt set: No delayed release indication + */ +#define DELAYED_RELEASE_IND + +#if defined(DELAYED_RELEASE_IND) +/* + * When RR stops the dedicated mode, the TI layer is not capable for correct + * completion of the UA response transmission. Therefore DL delays the release + * indication to RR for some uplink opportunities to give layer 1 time to + * transmit the frame completely before RR stops the dedicated mode. + */ +#define DL_FACCH_RELEASE_DELAY_VALUE 4 /* number of wait dummies on FACCH */ +#define DL_SDCCH_RELEASE_DELAY_VALUE 1 /* number of wait dummies on SDCCH */ +#endif /* DELAYED_RELEASE_IND */ + +/* + * DELAYED_SABM + * is set : To give layer 1 some time to switch the physical channel on FACCH + * DL delays the transmit of the SABM frame. After (re-)establishment + * request from RR, DL sends only dummies (return NULL) for the first + * uplink opportunities (see DL_FACCH_SABM_DELAY_VALUE). + * isīnt set: No delayed uplink of the SABM frame. + */ +#define DELAYED_SABM + +#if defined(DELAYED_SABM) +#undef DELAYED_SABM +#endif /* DELAYED_SABM */ + +#if defined(DELAYED_SABM) +/* + * To give layer 1 some time to switch the physical channel on FACCH + * DL delays the transmit of the SABM frame. After (re-)establishment request + * from RR, DL sends only dummies (return NULL) for the first uplink + * opportunities. + */ +#define DL_FACCH_SABM_DELAY_VALUE 1 +#endif /* DELAYED_SABM */ + +/* + * LATE_LEAVING_DEDICATED + * is set : The leaving of dedicated mode happens in latest moment, after + * the reception of an UA frame after sent of DISC + * or before uplink of the UA frame after reception of a DISC frame. + * isīnt set: In this case the dedicated mode is leaving immediately after + * the detection of a release (after the incoming L3 message + * CHANNEL RELEASE, or after reception of a DISC frame or before + * the uplink of a DISC frame). + */ +#define LATE_LEAVING_DEDICATED + +/* + * IFRAME_AS_RR + * is set : I frame might response with I frame + * isīnt set: I frame must response with RR frame + */ +#define IFRAME_AS_RR + +/* + * INVOKE_SIGNAL + * is set : DL does not send primitives or traces within L1 interrupt context + * anymore. It sends signals instead. The primitives or traces are + * delayed until the entity will be in the own context. + * isīnt set: Primitves or traces are processed immediately even is DL within + * in L1 interrupt context. + */ +#define INVOKE_SIGNAL + +/* + * SEND_FN_TO_L2_IN_DCCH + * is set to 1: The function dll_dcch_downlink() contains one more parameter, + the absolute frame number FN. + * is set to 0: No changes relating to dll_dcch_downlink. + */ +#define SEND_FN_TO_L2_IN_DCCH 1 + +/* + * RR_SHORT_PD_DETECT_KNOWN_MSG_ONLY + * is set to 1: The Bter format is detected for known message types + * only (the known messages are defined some lines after in + * this header file). + * is set to 0: The Bter format is detected on the basis of the short L2 header + * format. This is a more general approach, but with the + * disadvantage of possibly misconstrued invalid messages. + */ +//#define RR_SHORT_PD_DETECT_KNOWN_MSG_ONLY + +/* + * DL_2TO1 flag is used to identify new L1 interface via the MPHC entity + * as well as the test interface of the new 2to1 stack. + */ +#ifdef DL_2TO1 +#define MAX_L2_FRAME_SIZE L1_MAX_L2_FRAME_SIZE +#define T_RADIO_FRAME T_L1_RADIO_FRAME +#define T_PH_DATA_IND T_MPHC_PH_DATA_IND +#define PH_DATA_IND MPHC_PH_DATA_IND +#define L2_CHANNEL_SDCCH L1_L2_CHANNEL_SDCCH +#define L2_CHANNEL_FACCH_F L1_L2_CHANNEL_FACCH_F +#define L2_CHANNEL_FACCH_H L1_L2_CHANNEL_FACCH_H +#define L2_CHANNEL_SACCH L1_L2_CHANNEL_SACCH +#define CM_SIGNALLING_ONLY MPHC_CM_SIGNALLING_ONLY +#define CM_TCH_FS MPHC_CM_TCH_FS +#define CM_TCH_HS MPHC_CM_TCH_HS +#define VALID_BLOCK L1_VALID_BLOCK +#define DATA_VALID MPHC_DATA_VALID +#define DL_SAPI_0 PS_SAPI_0 +#define DL_SAPI_3 PS_SAPI_3 +#define PH_READY_TO_SEND L1TEST_CALL_MPHC_READ_DCCH +#endif /*DL_2TO1*/ + +#if defined(_SIMULATION_) +#define DL_TRACE_ENABLED /* trace during simulation */ +#define DL_IMMEDIATE_TRACE /* is write out immediately */ +#undef DISABLE_MEASREPORT_TRACE /* enable trace of measurement reports */ +#undef DISABLE_EMPTY_UI /* enable trace of empty frames */ +#define DL_TRACE_WIN32 + +#define TRACE_EVENT_WIN(s) TRACE_EVENT(s) +#define TRACE_EVENT_WIN_P1(s,a1) TRACE_EVENT_P1(s,a1) +#define TRACE_EVENT_WIN_P2(s,a1,a2) TRACE_EVENT_P2(s,a1,a2) +#define TRACE_EVENT_WIN_P3(s,a1,a2,a3) TRACE_EVENT_P3(s,a1,a2,a3) +#define TRACE_EVENT_WIN_P4(s,a1,a2,a3,a4) TRACE_EVENT_P4(s,a1,a2,a3,a4) +#define TRACE_EVENT_WIN_P5(s,a1,a2,a3,a4,a5) TRACE_EVENT_P5(s,a1,a2,a3,a4,a5) +#define TRACE_EVENT_WIN_P6(s,a1,a2,a3,a4,a5,a6) TRACE_EVENT_P6(s,a1,a2,a3,a4,a5,a6) +#if 0 +#define TRACE_EVENT_WIN_P7(s,a1,a2,a3,a4,a5,a6,a7) TRACE_EVENT_P7(s,a1,a2,a3,a4,a5,a6,a7) +#endif /* 0 */ +#define TRACE_EVENT_WIN_P8(s,a1,a2,a3,a4,a5,a6,a7,a8) TRACE_EVENT_P8(s,a1,a2,a3,a4,a5,a6,a7,a8) +#define TRACE_EVENT_WIN_P9(s,a1,a2,a3,a4,a5,a6,a7,a8,a9) TRACE_EVENT_P9(s,a1,a2,a3,a4,a5,a6,a7,a8,a9) +#else /* _SIMULATION_ */ +#undef DL_TRACE_WIN32 + +#define TRACE_EVENT_WIN(s) +#define TRACE_EVENT_WIN_P1(s,a1) +#define TRACE_EVENT_WIN_P2(s,a1,a2) +#define TRACE_EVENT_WIN_P3(s,a1,a2,a3) +#define TRACE_EVENT_WIN_P4(s,a1,a2,a3,a4) +#define TRACE_EVENT_WIN_P5(s,a1,a2,a3,a4,a5) +#define TRACE_EVENT_WIN_P6(s,a1,a2,a3,a4,a5,a6) +#define TRACE_EVENT_WIN_P7(s,a1,a2,a3,a4,a5,a6,a7) +#define TRACE_EVENT_WIN_P8(s,a1,a2,a3,a4,a5,a6,a7,a8) +#define TRACE_EVENT_WIN_P9(s,a1,a2,a3,a4,a5,a6,a7,a8,a9) +#endif /* _SIMULATION_ */ + + +/*==== CONSTANTS ==================================================*/ +/* + * Frame Header Macros + */ +#define GET_LENGTH_INDICATOR(s) ((((s)[2]) & 0xFC)>>2) +#define GET_P_BIT(s) ((((s)[1]) & 0x10)>>4) +#define GET_M_BIT(s) ((((s)[2]) & 0x02)>>1) +#define GET_RECEIVE_NUMBER(s) ((((s)[1]) & 0xE0)>>5) +#define GET_SEND_NUMBER(s) ((((s)[1]) & 0x0E)>>1) +#define GET_SAPI(s) ((((s)[0]) & 0x1C)>>2) +#define GET_EA(s) (((s)[0]) & 1) +#define GET_FORMAT_TYPE(s) (((s)[1]) & 3) +#define GET_CR(s) ((((s)[0]) & 2)>>1) +#define GET_EL(s) (((s)[2]) & 1) +#define GET_S_TYPE(s) (((s)[1]) & 0x0F) +#define GET_U_TYPE(s) (((s)[1]) & 0xEF) +#define GET_BTER_FORMAT(s) (((s)[0]) & (BTER_FORMAT_MASK)) +#if 0 +#define GET_LENGTH_FIELD(s) (((s)[2])) +#define GET_PSEUDO_LENGTH(s) ((((s)[0]) & 0xFC)>>2) +#endif /* 0 */ + + + +/* Boolean constants */ +#if !defined(TRUE) +#define TRUE (1 EQ 1) +#define FALSE (1 EQ 0) +#endif + +#if !defined(ELEMENTS) +#define ELEMENTS(array) (sizeof(array)/sizeof(array[0])) +#endif /* !ELEMENTS */ + +/* + * Bitoffset for encoding/decoding + */ +#define ENCODE_OFFSET 24 + +/* + * TI Circuit Switches Interface + */ +#define SIG_ONLY 0 +#define NO_SIGNALLING 1 + +/* + * Frame Sizes + * Maximum number of octets for the information field for frames of + * format A and B (SACCH, SDCCH, FACCH) + */ +#define N201_SDCCH DL_N201_DCCH_A_B +#define N201_SACCH DL_N201_SACCH_A_B +#define N201_FACCH DL_N201_DCCH_A_B + +/* + * VTX commands + */ +#define EMPTY_CMD 0 +#define RR_CMD 1 +#define SABM_CMD 2 +#define DISC_CMD 3 +#define UA_CMD 4 +#define DM_CMD 5 +#define RR_RSP 6 +#define REJ_CMD 7 + +/* + * Format Types (Control field format: octet bits 2+1) + */ +#define I_FORMAT 0 /* information transfer format (only bit 1) */ +#define I1_FORMAT 2 /* information transfer format (only bit 1) + N(S) */ +#define S_FORMAT 1 /* supervisory format (bits 2+1) */ +#define U_FORMAT 3 /* unnumbered format (bits 2+1) */ + +/* + * Frame Types (Control field format: octet bits 8-6,4-1) + */ +#define I_FRAME 0 /* I format (only bit 1) */ +#define RR_FRAME 1 /* S format (bits 4-1) */ +#define RNR_FRAME 5 /* S format (bits 4-1) */ +#define REJ_FRAME 9 /* S format (bits 4-1) */ +#define DISC_FRAME 0x43 /* U format (bits 8-6,4-1) */ +#define SABM_FRAME 0x2F /* U format (bits 8-6,4-1) */ +#define UI_FRAME 0x03 /* U format (bits 8-6,4-1) */ +#define DM_FRAME 0x0F /* U format (bits 8-6,4-1) */ +#define UA_FRAME 0x63 /* U format (bits 8-6,4-1) */ + +/* + * L2 Header Values + */ +#define MS2BS_CMD 0 +#define MS2BS_RSP 1 +#if 0 +#define BS2MS_CMD 1 +#define BS2MS_RSP 0 +#define ADDR_RESP_SAPI0 0x03 +#define ADDR_RESP_SAPI3 0x0F +#define ADDR_CMD_SAPI0 0x01 +#define ADDR_CMD_SAPI3 0x0D +#define UA_F0 0x63 +#define UA_F1 0x73 +#define RR_F0 0x01 +#define RR_F1 0x11 +#define RR_P0 0x01 +#define RR_P1 0x11 +#define REJ_F0 0x09 +#define REJ_F1 0x19 +#define DISC_P0 0x43 +#define DISC_P1 0x53 +#define SABM_P0 0x2F +#define SABM_P1 0x3F +#define DM_F0 0x0F +#define DM_F1 0x1F +#define UI_P0 0x03 +#define I_P0 0x00 +#define I_P1 0x10 +#define LENGTH_ZERO 0x01 +#endif /* 0 */ + +/* + * Message types for RR messsages using the RR short PD + * + * up/downlink message type channel name + * BSS->MS downlink | 0 0 0 0 0 | | SACCH System Information Type 10 + * BSS->MS downlink | 0 0 0 0 1 | | FACCH Notification/FACCH + * BSS->MS downlink | 0 0 0 1 0 | | DCCH Uplink Free + * MS->BSS uplink | 0 0 1 0 0 | | SACCH Enhanced Measurement Report + * BSS->MS downlink | 0 0 1 0 1 | | SACCH Measurement Information + * | | | + * 0 | | RR short PD + * 0 0 Short L2 header type 1 + */ + +#define RR_SHORT_PD 0 +#define L2_SHORT_HEAD 0 +#if defined(RR_SHORT_PD_DETECT_KNOWN_MSG_ONLY) /* detection of known messages only */ +#define RR_SHORT_PD_SI10 (((RR_SHORT_PD)<<7)|(0x00<<2)|(L2_SHORT_HEAD)) /* 0x00 */ +#define RR_SHORT_PD_NOTI_FACCH (((RR_SHORT_PD)<<7)|(0x01<<2)|(L2_SHORT_HEAD)) /* 0x04 */ +#define RR_SHORT_PD_UPLINK_FREE (((RR_SHORT_PD)<<7)|(0x02<<2)|(L2_SHORT_HEAD)) /* 0x08 */ +#define RR_SHORT_PD_ENH_MEAS_REP (((RR_SHORT_PD)<<7)|(0x04<<2)|(L2_SHORT_HEAD)) /* 0x10 */ +#define RR_SHORT_PD_MEAS_INFO (((RR_SHORT_PD)<<7)|(0x05<<2)|(L2_SHORT_HEAD)) /* 0x14 */ +#endif /* RR_SHORT_PD_DETECT_KNOWN_MSG_ONLY */ +/* general mask for Bter format */ +#define NOT_RR_SHORT_PD ((~RR_SHORT_PD)&0x01) +#define NOT_L2_SHORT_HEAD ((~L2_SHORT_HEAD)&0x03) +#define BTER_FORMAT_MASK (((NOT_RR_SHORT_PD)<<7)|(0x00<<2)|(NOT_L2_SHORT_HEAD)) /* 0x83 */ +#define SHORT_L2_HEADER_TYPE_1 (((RR_SHORT_PD)<<7)|(0x00<<2)|(L2_SHORT_HEAD)) /* 0x00 */ +/* + * Repetitions + */ +#define FACCH_N200_FR 34 +#define FACCH_N200_HR 29 +#define SDCCH_N200 23 +#define SACCH_N200 5 +#define N200_ESTABLISHMENT 5 + +#ifndef DL_2TO1 + /* align DL.sap with 8010_152_PS_Include.sap */ + #define PS_SAPI_0 DL_SAPI_0 + #define PS_SAPI_3 DL_SAPI_3 + /* align DL.sap with 8010_153_Cause_Include.sap */ + #define CAUSE_DL_INFO_FIELD_MISMATCH DL_INFO_FIELD_MISMATCH +#endif /* DL_2TO1 */ + +#define C_DCCH0 0 /* SAPI=0: SDCCH, FACCH */ +#define C_DCCH3 1 /* SAPI=3: SDCCH, SACCH */ +#define C_SACCH0 2 /* SAPI=0: SACCH */ +#define MAX_CHANNELS 3 + +#define PROCESS_NAME_INIT \ + "DCCH0", \ + "DCCH3", \ + "SACCH0" + +/* + * States of all Processes + */ +#define STATE_INVALID 0 +#define STATE_DISABLED 1 +#define STATE_IDLE_DL 2 +#define STATE_SUSPENDED 3 +#define STATE_CONTENTION_RESOLUTION 4 +#define STATE_AWAITING_ESTABLISHMENT 4 +#define STATE_MULTIPLE_FRAME_ESTABLISHED 5 +#define STATE_TIMER_RECOVERY 6 +#define STATE_AWAITING_RELEASE 7 +#define MAX_STATES 8 + +/* + * States of the Process DCCH0, (SAPI=0: SDCCH, FACCH) + */ +#define STATE_DCCH0_NAME_INIT \ + "invalid" ,\ + "DISABLED" ,\ + "IDLE" ,\ + "SUSPENDED" ,\ + "CONTENTION_RESOLUTION" ,\ + "MULTIPLE_FRAME_ESTABLISHED" ,\ + "TIMER_RECOVERY" ,\ + "AWAITING_RELEASE" +/* + * States of the Process DCCH3 (SAPI=3: SDCCH, SACCH) + */ +#define STATE_DCCH3_NAME_INIT \ + "invalid" ,\ + "DISABLED" ,\ + "IDLE" ,\ + "SUSPENDED" ,\ + "AWAITING_ESTABLISHMENT" ,\ + "MULTIPLE_FRAME_ESTABLISHED" ,\ + "TIMER_RECOVERY" ,\ + "AWAITING_RELEASE" + +/* + * DL manages 3 (MAX_CHANNELS) states: SACCH0, DCCH0, DCCH3 + */ +#ifdef OPTION_MULTITHREAD + #define PROCESS_NAME _ENTITY_PREFIXED(PROCESS_NAME) +#endif + +/* + * A definition is provided in DL_PEI.C + */ +#ifdef DL_PEI_C + GLOBAL const char * const STATE_DCCH0_NAME[MAX_STATES] = { STATE_DCCH0_NAME_INIT }; + GLOBAL const char * const STATE_DCCH3_NAME[MAX_STATES] = { STATE_DCCH3_NAME_INIT }; + GLOBAL const char * const PROCESS_NAME[MAX_CHANNELS] = { PROCESS_NAME_INIT }; + +#if defined(DL_TRACE_WIN32) + GLOBAL const char * const CH_TYPE_NAME[] = + { + "ch=0?", + "SACCH", /* 0x1 SACCH */ + "SDCCH", /* 0x2 SDCCH */ + "FACCH_H", /* 0x3 FACCH Halfrate */ + "FACCH_F", /* 0x4 FACCH Fullrate */ + "CCCH", /* 0x5 CCCH */ + "NBCCH", /* 0x6 normal BCCH */ + "PCH", /* 0x7 PCH */ + "EPCH", /* 0x8 extended PCH */ + "CBCH", /* 0x9 Cell Broadcast Channel */ + "EBCCH" /* 0xa extended BCCH */ + }; + GLOBAL const char * const VTX_NAME[] = + { + "EMPTY_CMD", /* 0 */ + "RR_CMD", /* 1 */ + "SABM_CMD", /* 2 */ + "DISC_CMD", /* 3 */ + "UA_CMD", /* 4 */ + "DM_CMD", /* 5 */ + "RR_RSP", /* 6 */ + "REJ_CMD" /* 7 */ + }; + GLOBAL const char * const SEND_NAME[] = + { + "RETURN_NULL", /* 0 */ + "UPLINK_NULL", /* 1 */ + "UPLINK_EMPTY", /* 2 */ + "UPLINK_NORMAL", /* 3 */ + "UPLINK_UA", /* 4 */ + "UPLINK_UA_F", /* 5 */ + "UPLINK_IFRAME", /* 6 */ + "UPLINK_IFRAME_P", /* 7 */ + "UPLINK_RR", /* 8 */ + "UPLINK_RR_F", /* 9 */ + "UPLINK_REJ", /* 10 */ + "UPLINK_REJ_F", /* 11 */ + "UPLINK_DCCH3", /* 12 */ + "UPLINK_REPORT" /* 13 */ + }; +#endif /* DL_TRACE_WIN32 */ + +#else /* DL_PEI_C */ + EXTERN const char * const STATE_DCCH0_NAME[MAX_STATES]; + EXTERN const char * const STATE_DCCH3_NAME[MAX_STATES]; + EXTERN const char * const PROCESS_NAME[MAX_CHANNELS]; + +#if defined(DL_TRACE_WIN32) + EXTERN const char * const CH_TYPE_NAME[]; + EXTERN const char * const VTX_NAME[]; + EXTERN const char * const SEND_NAME[]; +#endif /* DL_TRACE_WIN32 */ +#endif /* DL_PEI_C */ + +/* + * TRACE Constants + */ +#define TRACE_UPLINK 0 +#define TRACE_DOWNLINK 1 +#define TRACE_DL_EVENT 2 +#define TRACE_CHSTATE 3 +#define TRACE_PL_EVENT 4 +#define TRACE_RR_EVENT 5 +#define TRACE_UACK_UP 6 +#define TRACE_UACK_DN 7 + +#define TRACE_CH_UNKNOWN MAX_CHANNELS + +/* + * Error Causes + */ +#define T200_EXPIRED_N200_PLUS_1_TIMES 0 +#define UNSOLICITED_UA_RESPONSE 2 +#define UNSOLICITED_DM_RESPONSE 3 +#define UNSOLICITED_DM_RESPONSE_ABNORMAL_REL 4 +#define UNSOLICITED_SUPERVISORY_RESPONSE 5 +#define SEQUENCE_ERROR 6 +#define U_FRAME_WITH_INCORRECT_PARAMETERS 7 +#define S_FRAME_WITH_INCORRECT_PARAMETERS 8 +#define I_FRAME_WITH_INCORRECT_USE_OF_M_BIT 9 +#define I_FRAME_WITH_INCORRECT_LENGTH 10 +#define FRAME_NOT_IMPLEMENTED 11 + +/* + * DL Uplink commands + */ +enum uplink_enum +{ + RETURN_NULL = 0, + UPLINK_NULL, + UPLINK_EMPTY, + UPLINK_NORMAL, + UPLINK_UA, + UPLINK_UA_F, + UPLINK_IFRAME, + UPLINK_IFRAME_P, + UPLINK_RR, + UPLINK_RR_F, + UPLINK_REJ, + UPLINK_REJ_F, + UPLINK_DCCH3, + UPLINK_REPORT +}; + +#if defined(__PEI_H__) /* frame version 2.4.x */ +typedef ULONG T_SIGNAL_OPC; +#define FRAME_2_4_X +#elif defined(PEI_H) /* frame version 2.3.x */ +typedef USHORT T_SIGNAL_OPC; +#define FRAME_2_3_X +#else /* frame version unknown */ +#pragma error("unknown frame version, missing PEI_H or __PEI_H__") +#endif /* frame version */ + + +/*==== TYPES ======================================================*/ +typedef struct +{ + USHORT l_buf; + USHORT o_buf; + UBYTE buf [DL_MAX_L2_FRAME_SIZE]; +} T_FRAME; + +/* Buffer concept: + * Store buffer Contains complete layer 3 messages for the uplink direction + * Sending buffer Contains the complete message which is just send on uplink + * Transmit buffer Contains the segment which is just send on uplink + * Switch buffer Contains a layer 3 message in case of resumption or reconnection + */ +#define INDEX_MAX_STORE_BUFFER (MAX_QUEUED_MESSAGES-1) +#define INDEX_SENDING_BUFFER MAX_QUEUED_MESSAGES +#define INDEX_SWITCH_BUFFER (MAX_QUEUED_MESSAGES+1) +typedef struct +{ + USHORT no_of_stored_messages; + T_DL_DATA_REQ * store_buffer [MAX_QUEUED_MESSAGES]; + T_DL_DATA_REQ * sending_buffer; + T_DL_DATA_REQ * switch_buffer; + USHORT act_length; + USHORT act_offset; + T_FRAME transmit_buffer; + UBYTE m_bit; +} T_QUEUE; + +typedef struct +{ + UBYTE ch_type; + UBYTE vtx; + UBYTE T200_counter; + UBYTE time_flag; + UBYTE contention_resolution; + UBYTE reject_exception; + UBYTE acknowledge_pending; + UBYTE rc; + UBYTE f_bit; + UBYTE f_bit_flag; + UBYTE p_bit_flag; + UBYTE va; + UBYTE vr; + UBYTE vs; +} T_CCH; + +#if defined(INVOKE_SIGNAL) +typedef struct +{ + UBYTE ch_type; + UBYTE sapi; + UBYTE indication; +} T_DL_SIG_ESTABLISH_IND; + +typedef struct +{ + UBYTE ch_type; + UBYTE sapi; +} T_DL_SIG_ESTABLISH_CNF; + +typedef struct +{ + UBYTE ch_type; + UBYTE sapi; + ULONG fn; +} T_DL_SIG_DATA_IND; + +typedef struct +{ + UBYTE sapi; +} T_DL_SIG_DATA_CNF; + +#if 0 /* happens in primitive context only */ +typedef struct +{ + UBYTE error_flag; + UBYTE layer1head[2]; + UBYTE layer3msg[DL_N201_SACCH_A_B]; + UBYTE length; + ULONG fn; +} T_DL_SIG_UNITDATA_IND; +#endif /* 0 */ + +typedef struct +{ + UBYTE ch_type; + UBYTE error_flag; + UBYTE layer1head[2]; + UBYTE layer3msg[DL_N201_DCCH_Bter]; + UBYTE length; + ULONG fn; +} T_DL_SIG_SHORT_UNITDATA_IND; + +typedef struct +{ + UBYTE ch_type; + UBYTE sapi; + UBYTE cs; + BOOL init; +} T_DL_SIG_RELEASE_IND; + +typedef struct +{ + UBYTE ch_type; + UBYTE sapi; + BOOL init; +} T_DL_SIG_RELEASE_CNF; + +typedef struct +{ + UBYTE ch_type; + UBYTE sapi; +} T_DL_SIG_ERROR_IND; + +typedef struct +{ + void *pointer; +} T_DL_SIG_FREE_POINTER; + +typedef struct +{ + T_DL_DATA_IND ** in_msg; + UBYTE new_data_in[MAX_L2_FRAME_SIZE]; +} T_DL_SIG_CONCATENATE; + +typedef struct +{ + UBYTE trace_type; + UBYTE channel; + UBYTE ch_type; + UBYTE data_len; + T_TIME trace_time; + UBYTE data[MAX_L2_FRAME_SIZE]; +} T_DL_SIG_L2TRACE; + +typedef struct +{ + UBYTE type; + UBYTE ch_type; + UBYTE *frame; +} T_DL_SIG_L3TRACE; + +typedef struct +{ + UBYTE data[7 /*EM_DL_BUFFER_SIZE*/]; + UBYTE length; +} T_DL_SIG_EM_WRITE; + + +typedef union +{ + T_DL_SIG_ESTABLISH_IND establish_ind; + T_DL_SIG_ESTABLISH_CNF establish_cnf; + T_DL_SIG_DATA_IND data_ind; + T_DL_SIG_DATA_CNF data_cnf; +#if 0 /* happens in primitive context only */ + T_DL_SIG_UNITDATA_IND unitdata_ind; +#endif /* 0 */ + T_DL_SIG_SHORT_UNITDATA_IND short_unitdata_ind; + T_DL_SIG_RELEASE_IND release_ind; + T_DL_SIG_RELEASE_CNF release_cnf; + T_DL_SIG_ERROR_IND error_ind; + T_DL_SIG_FREE_POINTER free_pointer; + T_DL_SIG_CONCATENATE concatenate; + T_DL_SIG_L3TRACE l3trace; +#if defined(DL_TRACE_ENABLED) && defined(DL_IMMEDIATE_TRACE) + T_DL_SIG_L2TRACE l2trace; +#endif /* DL_TRACE_ENABLED && DL_IMMEDIATE_TRACE */ +#if defined(FF_EM_MODE) + T_DL_SIG_EM_WRITE em_write; +#endif /* FF_EM_MODE */ +} T_DL_SIGNAL_DATA_UNION; + +typedef struct +{ + BOOL busy; +#if defined(_SIMULATION_) + UBYTE idx; +#endif /* _SIMULATION_ */ + T_DL_SIGNAL_DATA_UNION u; +} T_DL_SIGNAL_DATA; + +#if defined(DL_TRACE_ENABLED) + #define DL_SIGNAL_DATA_ELEMENTS 9 +#else /* DL_TRACE_ENABLED */ + #define DL_SIGNAL_DATA_ELEMENTS 6 +#endif /* DL_TRACE_ENABLED */ + +/* + * number of signal data entries must be sufficient for + * 1 data indication or confirmation + * 1 error indication + * 1-2 free commands + * 1-2 engineering command + * 2-3 traces + */ +typedef struct +{ + int sig_idx; + T_DL_SIGNAL_DATA sig_data[DL_SIGNAL_DATA_ELEMENTS]; +} T_DL_SIGNAL; +#endif /* INVOKE_SIGNAL */ + +typedef struct +{ + BOOL dl_active; + BOOL interrupt_context; + UBYTE state[MAX_CHANNELS]; + T_CCH cch[MAX_CHANNELS]; + T_FRAME sacch_act_buffer; + T_FRAME sacch_last_buffer; + T_FRAME rr_short_pd_buffer; + UBYTE rr_short_pd_ch_type; + UBYTE sacch_mode; + T_DL_DATA_IND * dcch0_in_msg; + T_DL_DATA_IND * dcch3_in_msg; + T_QUEUE dcch0_queue; + T_QUEUE dcch3_queue; + BOOL dcch0_unserved; /* storing of indication (unserved DL-DATA_REQīs) */ + BOOL dcch3_unserved; /* for use with DL-ESTABLISHMENT-CNF */ + T_RADIO_FRAME l2_frame;/* Buffer for l2_frame and empty l2 frame */ + BOOL RR_dedicated;/* Flag for RR dedictated mode + * (necessary for measurement reports) */ + ULONG fn; /* last received frame number */ + UBYTE dcch0_ch_type; + UBYTE dcch0_disc_request;/* Flags for faster sending of DISC */ + UBYTE dcch3_disc_request;/* after L3 msg CAHNNEL RELEASE */ + + /* + * Flag for priority arrangement on the SACCH channel. + * DL must ensure that if a SAPI=3 frame is awaiting transmission, two SAPI=3 + * frames are not sent in consecutive SACCH frames. + * Dl must also be ensured that any SAPI=3 frame is followed by at least one + * SAPI=0 frame. + * This flag controls the priority of SMS messages and measurement reports. + */ + UBYTE sacch_last_uplink_sapi; +#if !defined(FF_GTI) +#if defined(DELAYED_SABM) + UBYTE dcch0_sabm_flag; + UBYTE dcch0_sabm_delay; +#endif /* DELAYED_SABM */ +#if defined(DELAYED_RELEASE_IND) + UBYTE release_ind_ch_type; + UBYTE release_ind_sapi; + UBYTE release_ind_delay; +#endif /* DELAYED_RELEASE_IND */ +#endif /* !FF_GTI */ +#if defined(INVOKE_SIGNAL) + T_DL_SIGNAL signal_struct; +#endif /* INVOKE_SIGNAL */ + +} T_DL_DATA_STORE; + +/* + * Predefined mesaurement reports + * + * If all entities are linked into one module this definitions + * prefixes all this functions with the enity name + */ +#ifdef OPTION_MULTITHREAD +#define meas_report_no_nc _ENTITY_PREFIXED(meas_report_no_nc) +#endif +EXTERN const T_FRAME meas_report_no_nc; + +/*==== EXPORT =====================================================*/ +#if defined(WIN32) +#include <stdio.h> +#endif /* WIN32 */ + +/* + * Prototypes Distribute RR + */ +EXTERN void drr_dl_establish_req (T_DL_ESTABLISH_REQ * est_req); +EXTERN void drr_dl_establish_ind (UBYTE ch_type, + UBYTE sapi, + UBYTE indication); +EXTERN void drr_dl_resume_req (T_DL_RESUME_REQ * resume_req); +EXTERN void drr_dl_reconnect_req (T_DL_RECONNECT_REQ * reconnect_req); +EXTERN void drr_dl_release_req (T_DL_RELEASE_REQ * release_req); +#ifndef DL_2TO1 +EXTERN void drr_mdl_release_req (T_MDL_RELEASE_REQ * release_req); +#endif /* DL_2TO1 */ +EXTERN void drr_dl_suspend_req (T_DL_SUSPEND_REQ * suspend_req); +EXTERN void drr_dl_data_req (T_DL_DATA_REQ * data_req); +EXTERN void drr_dl_data_ind (UBYTE sapi, + ULONG fn); +EXTERN void drr_dl_data_cnf (UBYTE sapi); +EXTERN void drr_dl_unitdata_req (T_DL_UNITDATA_REQ * unitdata_req); +EXTERN void drr_dl_unitdata_ind (UBYTE error_flag, + UBYTE * layer1head, + UBYTE * layer3msg, + UBYTE length, + ULONG fn); +EXTERN void drr_dl_short_unitdata_req (T_DL_SHORT_UNITDATA_REQ * short_unitdata_req); +EXTERN void drr_dl_short_unitdata_ind (UBYTE ch_type, + UBYTE error_flag, + UBYTE * layer1head, + UBYTE * layer3msg, + UBYTE length, + ULONG fn); +EXTERN void drr_dl_establish_cnf (UBYTE ch_type, + UBYTE sapi); +EXTERN void drr_dl_release_ind (UBYTE ch_type, + UBYTE sapi, + UBYTE cs, + BOOL init); +EXTERN void drr_dl_release_cnf (UBYTE ch_type, + UBYTE sapi, + BOOL init); +EXTERN void drr_error_ind (UBYTE ch_type, + UBYTE sapi); + +/* + * Prototypes Slow Associated Control Channel + */ +EXTERN void sacch0_init_dl_data (void); +EXTERN void sacch0_reset_meas (void); +EXTERN void sacch0_send_data (void); +/* + * Prototypes Slow Dedicated Control Channel (SAPI 0) + */ +EXTERN void dcch0_init_dl_data (void); +EXTERN void dcch0_delay_sabm (T_CCH * pcch); +EXTERN void dcch0_establish_req (T_DL_ESTABLISH_REQ * est_req); +EXTERN void dcch0_resume_req (T_DL_RESUME_REQ * resume_req); +EXTERN void dcch0_reconnect_req (T_DL_RECONNECT_REQ * reconnect_req); +EXTERN BOOL dcch0_release_req (T_DL_RELEASE_REQ * dl_release_req); +EXTERN void dcch0_mdl_release_req (void); +EXTERN void dcch0_suspend_req (T_DL_SUSPEND_REQ * suspend_req); +EXTERN void dcch0_data_req (T_DL_DATA_REQ * data_req); +EXTERN int dcch0_check_disc (int send); + +/* + * Prototypes Slow Dedicated Control Channel (SAPI 3) + */ +EXTERN void dcch3_init_dl_data (void); +EXTERN void dcch3_enable (UBYTE ch_type); +EXTERN void dcch3_establish_req (T_DL_ESTABLISH_REQ * est_req); +EXTERN BOOL dcch3_release_req (T_DL_RELEASE_REQ * dl_release_req); +EXTERN void dcch3_mdl_release_req (void); +EXTERN void dcch3_data_req (T_DL_DATA_REQ * data_req); +EXTERN int dcch3_check_disc (int send); + +#if defined(INVOKE_SIGNAL) +EXTERN void sig_init_signal_data (void); +EXTERN void sig_invoke_drr_dl_establish_ind (UBYTE ch_type, + UBYTE sapi, + UBYTE indication); +EXTERN void sig_invoke_drr_dl_data_cnf (UBYTE sapi); +#if 0 /* happens in primitive context only */ +EXTERN void sig_invoke_drr_dl_unitdata_ind (UBYTE error_flag, + UBYTE * layer1head, + UBYTE * layer3msg, + UBYTE length, + ULONG fn); +#endif /* 0 */ +EXTERN void sig_invoke_drr_dl_short_unitdata_ind (UBYTE ch_type, + UBYTE error_flag, + UBYTE * layer1head, + UBYTE * layer3msg, + UBYTE length, + ULONG fn); +EXTERN void sig_invoke_drr_dl_establish_cnf (UBYTE ch_type, + UBYTE sapi); +EXTERN void sig_invoke_drr_dl_release_ind (UBYTE ch_type, + UBYTE sapi, + UBYTE cs, + BOOL init); +EXTERN void sig_invoke_drr_dl_release_cnf (UBYTE ch_type, + UBYTE sapi, + BOOL init); +EXTERN void sig_invoke_drr_error_ind (UBYTE ch_type, + UBYTE sapi); +EXTERN void sig_invoke_com_free_pointer (void * pointer); +EXTERN void sig_invoke_com_concatenate (T_DL_DATA_IND ** in_msg, + UBYTE * new_data_in); +EXTERN void sig_invoke_com_data_ind (UBYTE ch_type, + UBYTE sapi, + ULONG fn); +EXTERN void sig_invoke_com_l3trace (UBYTE type, + UBYTE ch_type, + UBYTE * frame); +#if defined(DL_TRACE_ENABLED) && defined(DL_IMMEDIATE_TRACE) +EXTERN void sig_invoke_com_l2trace (UBYTE trace_type, + UBYTE channel, + UBYTE ch_type, + T_TIME trace_time, + UBYTE * data); +#endif /* DL_TRACE_ENABLED && DL_IMMEDIATE_TRACE */ +#if defined(FF_EM_MODE) +EXTERN void sig_invoke_dl_em_write (UBYTE length, + UBYTE * data); +EXTERN void sig_invoke_dl_em_first_event_check (void); +#endif /* FF_EM_MODE */ + +EXTERN void sig_handle_drr_dl_establish_ind (T_DL_SIGNAL_DATA * signal); +EXTERN void sig_handle_drr_dl_data_cnf (T_DL_SIGNAL_DATA * signal); + +EXTERN void sig_handle_drr_dl_short_unitdata_ind (T_DL_SIGNAL_DATA * signal); +EXTERN void sig_handle_drr_dl_establish_cnf (T_DL_SIGNAL_DATA * signal); +EXTERN void sig_handle_drr_dl_release_ind (T_DL_SIGNAL_DATA * signal); +EXTERN void sig_handle_drr_dl_release_cnf (T_DL_SIGNAL_DATA * signal); +EXTERN void sig_handle_drr_error_ind (T_DL_SIGNAL_DATA * signal); +EXTERN void sig_handle_com_free_pointer (T_DL_SIGNAL_DATA * signal); +EXTERN void sig_handle_com_concatenate (T_DL_SIGNAL_DATA * signal); +EXTERN void sig_handle_com_free_pointer (T_DL_SIGNAL_DATA * signal); +EXTERN void sig_handle_com_data_ind (T_DL_SIGNAL_DATA * signal); +EXTERN void sig_handle_com_l3trace (T_DL_SIGNAL_DATA * signal); +#if defined(DL_TRACE_ENABLED) && defined(DL_IMMEDIATE_TRACE) +EXTERN void sig_handle_com_l2trace (T_DL_SIGNAL_DATA * signal); +#endif /* DL_TRACE_ENABLED && DL_IMMEDIATE_TRACE */ +#if defined(FF_EM_MODE) +EXTERN UBYTE em_dl_write (UBYTE length, + UBYTE * data); +EXTERN void sig_handle_dl_em_write (T_DL_DATA_STORE * dl_data, + T_DL_SIGNAL_DATA * signal); +EXTERN void dl_em_first_event_check(void);/*for ACI notification of first EM event*/ +EXTERN void sig_handle_dl_em_first_event_check (void); +#endif /* FF_EM_MODE */ +#endif /* INVOKE_SIGNAL */ + +/* + * Prototypes Distribute PL + */ + +#ifdef _SIMULATION_ +#ifdef DL_2TO1 +EXTERN void l1test_call_mphc_read_dcch (T_L1TEST_CALL_MPHC_READ_DCCH * ready); +EXTERN void l1test_return_mphc_read_dcch (T_RADIO_FRAME * frame); +EXTERN void l1test_call_mphc_read_sacch (T_L1TEST_CALL_MPHC_READ_SACCH * ready); +EXTERN void l1test_return_mphc_read_sacch (T_RADIO_FRAME* frame); +EXTERN void l1test_call_mphc_dcch_downlink (T_L1TEST_CALL_MPHC_DCCH_DOWNLINK * data_ind); +EXTERN void l1test_return_mphc_dcch_downlink (T_L1TEST_RETURN_MPHC_DCCH_DOWNLINK * resp); +#else /* DL_2TO1 */ +EXTERN void dph_ph_ready_to_send (T_PH_READY_TO_SEND * ready); +#endif /* DL_2TO1 */ +#endif /* _SIMULATION_ */ + +/* SACCH Uplink Interface according to L1M_GS011-1 v.1.22, section 23. */ +EXTERN T_RADIO_FRAME *dll_read_sacch (U8 chn_mode); + +/* SACCH Downlink Interface according to L1M_GS011-1 v.1.22, section 24. */ +/* SACCH (SDCCH/FACCH only simulation) Downlink Test Interface */ +EXTERN void dph_ph_data_ind (T_PH_DATA_IND * data_ind); + +#if defined(DL_2TO1) || defined(USE_L1M_GS001_1) +/* DCCH Uplink Interface according to L1M_GS001-1, section 25. */ +EXTERN T_RADIO_FRAME * dll_read_dcch (U8 chn_mode, U8 channel_type); + +/* DCCH Downlink Interface according to L1M_GS001-1, section 26. */ +EXTERN void dll_dcch_downlink (U32 * data_ptr, U8 valid_flag, U8 channel_type, U32 fn); + +#else /* DL_2TO1 || USE_L1M_GS001_1 */ +/* DCCH Uplink Interface according to L1M_GS001-1 v.1.22, section 25. */ +EXTERN T_RADIO_FRAME * dll_read_dcch (U8 chn_mode); + +/* DCCH Downlink Interface according to L1M_GS001-1 v.1.22, section 26. */ +#if defined(SEND_FN_TO_L2_IN_DCCH) && (SEND_FN_TO_L2_IN_DCCH == 1) + EXTERN void dll_dcch_downlink (U32 * data_ptr, U8 valid_flag, U32 fn); +#else /* SEND_FN_TO_L2_IN_DCCH == 1 */ + EXTERN void dll_dcch_downlink (U32 * data_ptr, U8 valid_flag); +#endif /* SEND_FN_TO_L2_IN_DCCH == 1 */ +#endif /* DL_2TO1 || USE_L1M_GS001_1 */ + +/* SACCH/SDCCH/FACCH Uplink Interface */ +EXTERN T_RADIO_FRAME *dl1_uplink_ind (UBYTE channel_type, + UBYTE no_signalling_flag); + +/* +* Prototypes Downlink and Uplink Functions (DL_STATE.c) +*/ +EXTERN int dl_downlink (UBYTE error_flag, + UBYTE channel_type, + UBYTE * frame, + ULONG fn); +EXTERN void set_channel_state (UBYTE channel, + UBYTE state); +EXTERN T_RADIO_FRAME* dl_uplink (UBYTE channel, + UBYTE sapi, + UBYTE no_signalling_mode, + BOOL recursiv); + +EXTERN int uplink_awaiting_release (UBYTE channel, + UBYTE sapi); +/* +* Prototypes Common Functions +*/ +EXTERN void com_free_pointer (void * pointer); +EXTERN void com_free_queue_buffer (T_QUEUE * queue, + USHORT index); +EXTERN void com_clear_queue (UBYTE sapi); +EXTERN void com_restore_queue (UBYTE sapi, + T_DL_DATA_REQ * est_req); +EXTERN void com_recover_queue (UBYTE sapi); +EXTERN void com_store_queue (UBYTE sapi, + T_DL_DATA_REQ * data_req); +EXTERN void com_read_queue (UBYTE ch_type, + UBYTE sapi, + UBYTE * m_bit); +EXTERN BOOL com_queue_awaiting_transmission (UBYTE sapi); +EXTERN void com_leave_dedicated (UBYTE ch_type); +EXTERN void possible_reset_dcch0_ch_type (void); +EXTERN void com_concatenate (T_DL_DATA_IND ** in_msg, + UBYTE * new_data_in); +EXTERN UBYTE com_check_nr (UBYTE va, + UBYTE vs, + UBYTE nr); +EXTERN void com_prepare_DISC (UBYTE channel, + UBYTE sapi); +EXTERN void com_build_UA_response (UBYTE ch_type, + UBYTE sapi, + UBYTE f_bit); +EXTERN void com_build_RR_response (UBYTE ch_type, + UBYTE sapi, + UBYTE nr, + UBYTE f_bit); +EXTERN void com_build_REJ_response (UBYTE ch_type, + UBYTE sapi, + UBYTE nr, + UBYTE f_bit); +EXTERN void com_build_DISC_command (UBYTE ch_type, + UBYTE sapi, + UBYTE p_bit); +EXTERN void com_build_SABM (UBYTE ch_type, + UBYTE sapi, + BOOL contention_resultion); +EXTERN void com_build_DM_response (UBYTE ch_type, + UBYTE sapi, + UBYTE f_bit); +EXTERN void com_build_I_command (UBYTE ch_type, + UBYTE sapi, + UBYTE ns, + UBYTE nr, + UBYTE p_bit, + UBYTE m_bit, + T_QUEUE * queue); +EXTERN void com_build_UI_command (UBYTE ch_type, + UBYTE sapi, + const T_FRAME * buffer); +EXTERN void com_build_UI_Bter (UBYTE ch_type); +EXTERN UBYTE com_compare_L3_msg (T_DL_DATA_REQ * data_ind1, + UBYTE * data_ind2); +GLOBAL void com_data_ind (UBYTE ch_type, + UBYTE sapi, + ULONG fn); +EXTERN void com_l2trace (UBYTE trace_type, + UBYTE channel, + UBYTE ch_type, + T_TIME event_time, + UBYTE * data); +EXTERN void com_l3trace (UBYTE type, + UBYTE ch_type, + UBYTE * frame); +EXTERN void com_print_l3trace (UBYTE type, + UBYTE ch_type, + UBYTE sapi, + UBYTE * l3msg); +EXTERN void com_init_data (void); + + +EXTERN CHAR* dl_version (void); +EXTERN T_DL_DATA_STORE *dl_get_data (void); + +#if defined (DL_TRACE_ENABLED) +EXTERN void dl_trace (UCHAR trace_type, + UCHAR channel, + UCHAR ch_type, + UCHAR * data); +#if defined(DL_IMMEDIATE_TRACE) + +EXTERN void dl_fast_trace (UBYTE trace_type, + UBYTE channel, + UBYTE ch_type, + T_TIME trace_time, + ULONG trace_mask, + UBYTE * data); +#else /* DL_IMMEDIATE_TRACE */ +EXTERN void dl_trace_init (void); +EXTERN void dl_trace_exit (void); +EXTERN void dl_trace_read (void); +EXTERN void dl_trace_read_all (void); +EXTERN void dl_trace_clear (void); +#endif /* DL_IMMEDIATE_TRACE */ +#endif /* DL_TRACE_ENABLED */ + +/* + * Prototypes Customer Specific Functions + */ + + +EXTERN USHORT dl_handle; + +#define ENTITY_DATA dl_data + + +#if defined (DL_PEI_C) +GLOBAL T_DL_DATA_STORE dl_data_base; +#else +EXTERN T_DL_DATA_STORE dl_data_base; +#endif /* DL_PEI_C */ + +#define GET_INSTANCE_DATA register T_DL_DATA_STORE *dl_data= &dl_data_base + + + +/* + * If all entities are linked into one module this definitions + * prefixes the global data with the enity name + */ +#ifdef TI_PS_HCOMM_CHANGE +#define hCommDL _hCommDL +#else /* for hCommHandles backward compatibility */ +#ifdef OPTION_MULTITHREAD + #define hCommDL _ENTITY_PREFIXED(hCommDL) + #define hCommRR _ENTITY_PREFIXED(hCommRR) + #define hCommPL _ENTITY_PREFIXED(hCommPL) +#endif + +EXTERN T_HANDLE hCommDL; /* Self Communication */ +EXTERN T_HANDLE hCommRR; /* RR Communication */ +EXTERN T_HANDLE hCommPL; /* PL Communication */ +#endif + +#define SYST_TRACE(a) vsi_o_ttrace(0, 0xFFFF,a) +#define SYST 0, 0xffff +#ifdef TI_PS_HCOMM_CHANGE +#define DLTRC _hCommDL, 0x0200 +#else /* for hCommHandles backward compatibility */ +#define DLTRC hCommDL, 0x0200 +#endif +#define SYST_TRACE_P(a) vsi_o_ttrace a + + +#if defined(DL_TRACE_ENABLED) +#if defined(DL_IMMEDIATE_TRACE) +#define DL_OFFLINE_TRACE(type, ch, ch_type, data) \ + com_l2trace (type, (U8) (ch),(U8)(ch_type), 0, (UBYTE *)(data)) +#else /* DL_IMMEDIATE_TRACE */ +#define DL_OFFLINE_TRACE(type, ch, ch_type, data) \ + dl_trace ((UCHAR)(type), (UCHAR)(ch), (UCHAR)(ch_type), (UCHAR *)(data)) +#endif /* DL_IMMEDIATE_TRACE */ +#else +#define DL_OFFLINE_TRACE(type, ch, ch_type, data) /* do nothing */ +#endif /* DL_TRACE_ENABLED */ + +#if !defined(_FILE10_) +#define __FILE10__ (__FILE__+strlen(__FILE__)-11) +#endif /* !_FILE10_ */ + +#if defined(DL_TRACE_ENABLED) || defined(FF_EM_MODE) +EXTERN void com_semaphore_err (void); +GLOBAL int com_enter_critical_section (T_HANDLE sem); +GLOBAL int com_leave_critical_section (T_HANDLE sem); +#define ENTER_CRITICAL_SECTION(sem) if (com_enter_critical_section(sem))return +#define LEAVE_CRITICAL_SECTION(sem) if (com_leave_critical_section(sem))return +#if !defined(DL_IMMEDIATE_TRACE) +GLOBAL int com_semaphore_state (T_HANDLE sem); +#define TEST_SEMAPHORE(sem) if (com_semaphore_state(sem)) return +#endif /* !DL_IMMEDIATE_TRACE */ +#endif /* DL_TRACE_ENABLED || FF_EM_MODE */ + + +#if defined (DL_TRACE_ENABLED) && defined(DL_TRACE_PFREE) +#define MY_PFREE(p) p = my_pfree (p, __LINE__, __FILE10__) +void* my_pfree(void *pointer, int line, char *file); +#else +#define MY_PFREE(p) PFREE(p) +#endif /* DL_TRACE_ENABLED */ + + +#if defined(_SIMULATION_) +#define COM_FREE_QUEUE_BUFFER(q,i) \ + {TRACE_EVENT_WIN_P4 ("FREE_QUEUE_BUFFER:q=%p i=%u (%s#%u)",q,i,__FILE10__, __LINE__);\ + com_free_queue_buffer(q, i);} +#define COM_FREE_POINTER(p) \ + {TRACE_EVENT_WIN_P4 ("call com_free_pointer(,%s=%08x) (%s#%u)", #p, p, __FILE10__, __LINE__);\ + com_free_pointer ( p);} +#else /* _SIMULATION_ */ +#define COM_FREE_QUEUE_BUFFER(q,i) com_free_queue_buffer(q,i) +#define COM_FREE_POINTER(p) com_free_pointer ( p) +#endif /* _SIMULATION_ */ + + +#if 0 +#define ARRAY_TRACE +#if defined(ARRAY_TRACE) +EXTERN void rr_array_trace (UBYTE*array, int size, char *titel); +#define TRACE_ARRAY(array, size, titel) rr_array_trace(array, size, titel) +#else /* ARRAY_TRACE */ +#define TRACE_ARRAY(array, size, titel) +#endif /* ARRAY_TRACE */ +#endif /* 0 */ + +#endif /* !__DL_H__ */ + +