--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/g23m-aci/aci/aci_bat_csc.c	Tue Oct 11 02:02:43 2016 +0000
@@ -0,0 +1,295 @@
+/* 
++----------------------------------------------------------------------------- 
+|  Project :  GSM-F&D (8411)
+|  Modul   :  ACI_BAT
++-----------------------------------------------------------------------------
+|  Copyright 2002 Texas Instruments Berlin, AG
+|                 All rights reserved. 
+|
+|                 This file is confidential and a trade secret of Texas 
+|                 Instruments Berlin, AG 
+|                 The receipt of or possession of this file does not convey 
+|                 any rights to reproduce or disclose its contents or to 
+|                 manufacture, use, or sell anything it may describe, in 
+|                 whole, or in part, without the specific written consent of 
+|                 Texas Instruments Berlin, AG. 
++----------------------------------------------------------------------------- 
+|  Purpose :  This BAT wrapper modul is ...
+| 
++----------------------------------------------------------------------------- 
+*/ 
+ 
+#include "aci_all.h"     /* includes prim.h, which includes p_bat.h */ 
+#include "aci_cmh.h"     /* prototypes of sAT_,qAT_,tAT_    */
+#include "aci_cmd.h"
+#include "aci_lst.h" 
+#include "ati_int.h"
+#include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ 
+#include "aci_bat.h"
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
+| STATE   : code                      ROUTINE : sBAT_PercentBAND     |
++--------------------------------------------------------------------+
+
+  PURPOSE : 
+*/
+GLOBAL T_ACI_BAT_RSLT sBAT_PercentBAND(T_ACI_DTI_PRC_PSI *src_infos_psi,
+                                       T_BAT_cmd_send    *cmd)
+{
+  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
+  T_BAT_cmd_set_percent_band *band = cmd->params.ptr_set_percent_band;
+
+  TRACE_FUNCTION ("sBAT_PercentBAND()");
+  
+  /* Pass the value directly as given by the BAT application */
+  if (band->band NEQ BAT_P_BAND_BAND_NOT_PRESENT)
+  {
+    ret = (T_ACI_BAT_RSLT)sAT_PercentBAND((T_ACI_CMD_SRC)src_infos_psi->srcId, 
+		                                                          (T_ACI_BAND_MODE)band->mode, (U8)band->band);
+  }
+
+  return ret;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
+| STATE   : code                      ROUTINE : tBAT_PercentBAND     |
++--------------------------------------------------------------------+
+
+  PURPOSE : 
+*/
+GLOBAL T_ACI_BAT_RSLT tBAT_PercentBAND(T_ACI_DTI_PRC_PSI *src_infos_psi,
+                                       T_BAT_cmd_send    *cmd)
+{
+  TRACE_FUNCTION ("tBAT_PercentBAND()");
+  return (ACI_BAT_FAIL);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
+| STATE   : code                      ROUTINE : qBAT_PercentBAND     |
++--------------------------------------------------------------------+
+
+  PURPOSE : 
+*/
+GLOBAL T_ACI_BAT_RSLT qBAT_PercentBAND(T_ACI_DTI_PRC_PSI *src_infos_psi,
+                                       T_BAT_cmd_send    *cmd)
+{
+  T_ACI_BAT_RSLT ret;
+  T_BAT_cmd_response resp;
+  T_BAT_res_que_percent_band band;
+
+  TRACE_FUNCTION ("qBAT_PercentBAND()");
+
+  resp.ctrl_response = BAT_RES_QUE_PERCENT_BAND;
+  resp.response.ptr_que_percent_band = &band;
+  /* Band initial value should be assigned to 0 */
+  resp.response.ptr_que_percent_band->band = BAT_P_BAND_BAND_NOT_PRESENT; 
+
+  ret = (T_ACI_BAT_RSLT)qAT_PercentBAND((T_ACI_CMD_SRC)src_infos_psi->srcId,
+  	                       (T_ACI_BAND_MODE*)&band.mode, (U8*)&band.band);
+  
+  aci_bat_send(src_infos_psi, &resp);
+  return (ret);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
+| STATE   : code                      ROUTINE : qBAT_PercentCPI      |
++--------------------------------------------------------------------+
+
+  PURPOSE : 
+*/
+GLOBAL T_ACI_BAT_RSLT qBAT_PercentCPI(T_ACI_DTI_PRC_PSI *src_infos_psi,
+                                      T_BAT_cmd_send    *cmd)
+{
+  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
+  T_BAT_cmd_response resp;
+  /* T_BAT_res_que_percent_cpi cpi; */
+
+  TRACE_FUNCTION ("qBAT_PercentCPI()");
+  
+  /* resp.ctrl_response = BAT_RES_QUE_PERCENT_CPI; */
+  /* hmm, do not know which ACI function to call ! */ 
+  aci_bat_send(src_infos_psi, &resp);
+  return (ret);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
+| STATE   : code                      ROUTINE : qBAT_PercentCNAP     |
++--------------------------------------------------------------------+
+
+  PURPOSE : 
+*/
+GLOBAL T_ACI_BAT_RSLT qBAT_PercentCNAP(T_ACI_DTI_PRC_PSI *src_infos_psi,
+                                       T_BAT_cmd_send    *cmd)
+{
+  T_ACI_BAT_RSLT ret;
+  T_BAT_cmd_response resp;
+  T_BAT_res_que_percent_cnap cnap;
+
+  TRACE_FUNCTION ("qBAT_PercentCNAP()");
+
+  resp.ctrl_response = BAT_RES_QUE_PERCENT_CNAP;
+  resp.response.ptr_que_percent_cnap = &cnap;
+
+  ret = (T_ACI_BAT_RSLT)qAT_PercentCNAP((T_ACI_CMD_SRC)src_infos_psi->srcId);
+  aci_bat_send(src_infos_psi, &resp);
+  return (ret);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
+| STATE   : code                      ROUTINE : sBAT_PercentALS      |
++--------------------------------------------------------------------+
+
+  PURPOSE : 
+*/
+GLOBAL T_ACI_BAT_RSLT sBAT_PercentALS(T_ACI_DTI_PRC_PSI *src_infos_psi,
+                                      T_BAT_cmd_send    *cmd)
+{
+  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
+  T_ACI_ALS_MOD ALSmode;
+
+  TRACE_FUNCTION ("sBAT_PercentALS()");
+
+#ifndef _SIMULATION_
+/* mapping for SAP BAT %ALS values according to 8415.052.doc */
+  switch( cmd->params.ptr_set_percent_als->mode )
+  {
+      case BAT_P_ALS_MOD_SPEECH:
+        ALSmode = ALS_MOD_SPEECH;
+        break;
+  
+      case BAT_P_ALS_MOD_AUX_SPEECH:
+        ALSmode = ALS_MOD_AUX_SPEECH;
+        break;
+  
+      default:
+        cmdCmeError(CME_ERR_OpNotSupp);
+        return (ACI_BAT_FAIL);
+  }
+#else /* if SIMULATION */
+  ALSmode = cmd->params.ptr_set_percent_als->mode;
+#endif /* SIMULATION */ 
+  ret = (T_ACI_BAT_RSLT)sAT_PercentALS((T_ACI_CMD_SRC)src_infos_psi->srcId, ALSmode);
+  return (ret);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
+| STATE   : code                      ROUTINE : tBAT_PercentALS      |
++--------------------------------------------------------------------+
+
+  PURPOSE : 
+*/
+GLOBAL T_ACI_BAT_RSLT tBAT_PercentALS      (T_ACI_DTI_PRC_PSI *src_infos_psi,
+                                            T_BAT_cmd_send    *cmd)
+{
+  TRACE_FUNCTION ("tBAT_PercentALS()");
+  return (ACI_BAT_FAIL);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
+| STATE   : code                      ROUTINE : qBAT_PercentALS      |
++--------------------------------------------------------------------+
+
+  PURPOSE : 
+*/
+GLOBAL T_ACI_BAT_RSLT qBAT_PercentALS(T_ACI_DTI_PRC_PSI *src_infos_psi,
+                                      T_BAT_cmd_send    *cmd)
+{
+  T_ACI_BAT_RSLT ret;
+  T_BAT_cmd_response resp;
+  T_BAT_res_que_percent_als als;
+  T_ACI_ALS_MOD als_aci_mode;
+
+  TRACE_FUNCTION ("qBAT_PercentALS()");
+
+  resp.ctrl_response = BAT_RES_QUE_PERCENT_ALS;
+  resp.response.ptr_que_percent_als = &als;
+
+  ret = (T_ACI_BAT_RSLT)qAT_PercentALS((T_ACI_CMD_SRC)src_infos_psi->srcId,&als_aci_mode);
+  switch(als_aci_mode)
+  {
+      case ALS_MOD_SPEECH:
+        als.mode = BAT_P_ALS_MOD_SPEECH;
+        break;
+  
+      case ALS_MOD_AUX_SPEECH:
+        als.mode = BAT_P_ALS_MOD_AUX_SPEECH;
+        break;
+  
+      default:
+        cmdCmeError(CME_ERR_OpNotSupp);
+        return (ACI_BAT_FAIL);
+  }
+  aci_bat_send(src_infos_psi, &resp);
+  return (ret);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
+| STATE   : code                      ROUTINE : sBAT_PercentPPP      |
++--------------------------------------------------------------------+
+
+  PURPOSE : 
+*/
+#if defined(FF_WAP) || defined(FF_PPP) || defined(FF_SAT_E)
+
+GLOBAL T_ACI_BAT_RSLT sBAT_PercentPPP(T_ACI_DTI_PRC_PSI *src_infos_psi,
+                                      T_BAT_cmd_send    *cmd)
+{
+  T_ACI_BAT_RSLT ret;
+
+  TRACE_FUNCTION ("sBAT_PercentPPP()");
+
+  ret =   (T_ACI_BAT_RSLT)sAT_PercentPPP((T_ACI_CMD_SRC)src_infos_psi->srcId,
+            (T_ACI_PPP_PROT)cmd->params.ptr_set_percent_ppp->authprot,
+            (CHAR *)cmd->params.ptr_set_percent_ppp->user,
+            (CHAR *)cmd->params.ptr_set_percent_ppp->password,
+            (T_ACI_PPP_CON)cmd->params.ptr_set_percent_ppp->conn_type);
+
+  return (ret);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
+| STATE   : code                      ROUTINE : qBAT_PercentPPP      |
++--------------------------------------------------------------------+
+
+  PURPOSE : 
+*/
+
+GLOBAL T_ACI_BAT_RSLT qBAT_PercentPPP(T_ACI_DTI_PRC_PSI *src_infos_psi,
+                                      T_BAT_cmd_send    *cmd)
+{
+  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
+  T_BAT_cmd_response resp;
+  T_BAT_res_que_percent_ppp ppp;
+
+  TRACE_FUNCTION ("qBAT_PercentPPP()");
+
+  resp.ctrl_response = BAT_RES_QUE_PERCENT_PPP;
+  resp.response.ptr_que_percent_ppp = &ppp;
+
+  ret = (T_ACI_BAT_RSLT) qAT_PercentPPP(src_infos_psi->srcId, (ULONG*)&ppp.ipaddr, (ULONG*)&ppp.dns1,(ULONG*)&ppp.dns2);
+  aci_bat_send(src_infos_psi, &resp);
+  return (ret);
+}
+#endif /* defined(FF_WAP) || defined(FF_PPP) || defined(FF_SAT_E) */
+