--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/g23m-aci/aci/ati_pdu.c	Tue Oct 11 02:02:43 2016 +0000
@@ -0,0 +1,1850 @@
+/* 
++----------------------------------------------------------------------------- 
+|  Project :  GSM-F&D (8411)
+|  Modul   :  ATI
++----------------------------------------------------------------------------- 
+|  Copyright 2002 Texas Instruments Berlin, AG 
+|                 All rights reserved. 
+| 
+|                 This file is confidential and a trade secret of Texas 
+|                 Instruments Berlin, AG 
+|                 The receipt of or possession of this file does not convey 
+|                 any rights to reproduce or disclose its contents or to 
+|                 manufacture, use, or sell anything it may describe, in 
+|                 whole, or in part, without the specific written consent of 
+|                 Texas Instruments Berlin, AG. 
++----------------------------------------------------------------------------- 
+|  Purpose :  AT Command Interpreter Extension for SMS PDU mode
++----------------------------------------------------------------------------- 
+*/ 
+
+#ifndef ATI_PDU_C
+#define ATI_PDU_C
+
+#undef DUMMY_ATI_STRINGS
+
+#include "aci_all.h"
+
+#include "aci_cmh.h"
+#include "ati_cmd.h"
+#include "aci_io.h"
+#include "aci_cmd.h"
+#include "aci.h"
+#include "psa.h"
+#include "psa_sms.h"
+#include "aci_lst.h"
+
+#include "cmh.h"
+#include "cmh_sms.h"
+#include "gdi.h"
+#include "audio.h"
+#include "p_sim.h"
+#include "p_aci.h"
+#include "aoc.h"
+#include "aci.h"
+#include "pcm.h"
+#include "rx.h"
+#include "pwr.h"
+
+#include "aci_cmd.h"
+#include "aci_mem.h"
+#include "aci_prs.h"
+
+#include "ati_int.h"
+
+#ifdef FF_ATI_BAT
+
+#include "typedefs.h"
+#include "gdd.h"
+#include "bat.h"
+
+#include "ati_bat.h"
+
+#endif /*FF_ATI_BAT*/
+
+GLOBAL USHORT GsmToHex     (UBYTE in, char * buffer, USHORT pos);
+// GLOBAL USHORT HexAdress    (CHAR * adress, UBYTE ton, UBYTE npi, char * buffer, USHORT pos);
+// GLOBAL USHORT HexAdressTP  (CHAR * adress, UBYTE ton, UBYTE npi, char * buffer, USHORT pos);
+// GLOBAL USHORT HexScts      (T_ACI_VP_ABS * scts, char * buffer, USHORT pos);
+// GLOBAL USHORT HexMessage   (T_ACI_SM_DATA * data, UBYTE length, char * buffer, USHORT pos);
+// GLOBAL char * GSMAddress   (char * cl, char * address, T_ACI_TOA *tosca);
+GLOBAL char * HexToGsm     (char * cl, UBYTE * value);
+
+#ifdef WIN32
+EXTERN T_ACI_SMS_READ   smsReadMode;
+#endif
+
+LOCAL SHORT  length_of_pdu_message = 0;
+LOCAL UBYTE  pdu_error_detected = FALSE;
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : atPlusCMGSPdu      |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CMGS command (SEND Message) in PDU mode.
+*/
+
+#if defined (SMS_PDU_SUPPORT)
+
+GLOBAL T_ATI_RSLT atPlusCMGSPdu (char *cl, UBYTE srcId)
+{
+  T_ACI_RETURN   ret = AT_FAIL;
+  T_ACI_SM_DATA  pdu;
+  T_SMS_SET_PRM * pSMSSetPrm; /* points to SMS parameter set */
+
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  pdu.len = 0;
+
+  pSMSSetPrm = smsShrdPrm.pSetPrm[srcId];
+
+  TRACE_FUNCTION("atPlusCMGSPdu()");
+
+  if (src_params->text_mode EQ CMD_MODE)
+  {
+    /*
+     * Extract the length (excluding SCA octets) outto be parsed from
+     * the input pointer cl
+     */
+    cl = parse (cl,"r",&length_of_pdu_message);
+    if ( !cl OR length_of_pdu_message EQ 0)
+    {
+      cmdCmsError(CMS_ERR_OpNotAllowed);
+      return (ATI_FAIL);
+    }
+    src_params->text_mode = TXT_MODE;
+    return (ATI_EXCT);
+  } /* end of if (src_params->text_mode EQ CMD_MODE) */
+  else
+  {
+    UBYTE i = 0;
+    UBYTE sca_len = 0;
+    UBYTE offset  = 0;
+    UBYTE pdu_message_octets_lenth = 0;
+
+    src_params->text_mode = CMD_MODE;
+    /*
+     * Input line with pdu is given
+     */
+    pdu_error_detected = FALSE;
+
+    HexToGsm (cl, &sca_len);
+    
+    TRACE_EVENT_P1("%d",sca_len);
+
+    if (sca_len > ((MAX_SMS_ADDR_DIG+1)/2) + 1)
+    {
+      TRACE_ERROR("SCA too long !!!");
+      cmdCmsError(CMS_ERR_OpNotAllowed);
+      return (ATI_FAIL);
+    }
+
+    /*
+    calculation of the real length of PDU string
+
+    The first octet in the input is an indicator of the length of the SMSC information supplied.
+
+    And this Octet and the SMSC content do not count in the real length of PDU string.
+
+    so here, the length of the input needs to minus 2 + sca_len*2 and then divide 2.
+    */
+    pdu_message_octets_lenth = (strlen(cl)-2-sca_len*2)/2;
+
+    TRACE_EVENT_P1("pdu_message_octets_lenth == %d",pdu_message_octets_lenth);
+
+    if(pdu_message_octets_lenth NEQ length_of_pdu_message)
+    {
+      cmdCmsError (CMS_ERR_OpNotAllowed);
+      TRACE_EVENT("ERROR: input pdu message length do not match the real length!");
+      return (ATI_FAIL);
+    }
+
+    if (sca_len EQ 0)  /* no SCA given */
+    {
+      offset = CodeRPAddress(pdu.data,
+                                pSMSSetPrm -> sca.c_num,
+                                pSMSSetPrm -> sca.ton,
+                                pSMSSetPrm -> sca.npi,
+                                pSMSSetPrm -> sca.num);
+
+      pdu.len = length_of_pdu_message + offset;
+      cl += 2;
+    }
+    else
+    {
+      pdu.len = length_of_pdu_message + sca_len + 1;
+    }
+
+    for (i=offset; i<pdu.len AND *cl NEQ '\0' AND i<MAX_SM_LEN; i++)
+    {
+      cl = HexToGsm (cl, &pdu.data[i]);
+    }
+
+#ifdef FF_ATI_BAT
+    {
+      T_BAT_cmd_send cmd;
+      T_BAT_cmd_set_plus_cmgs cmgs;
+
+      /*
+      *   Check that BAT can handle this size of PDU.
+      */
+      if (pdu.len>BAT_MAX_SM_LEN)
+      {
+        TRACE_EVENT("ERROR: PDU too big for BAT");
+        cmdCmsError(CMS_ERR_UnknownErr);
+        return (ATI_FAIL);
+      }
+
+      cmd.ctrl_params=BAT_CMD_SET_PLUS_CMGS;
+      cmd.params.ptr_set_plus_cmgs=&cmgs;
+
+      /*
+      *   Copy in the PDU data, secure in the knowledge that we have
+      *   enough room for it.
+      */
+      memcpy(&cmgs.pdu,pdu.data,BAT_MAX_SM_LEN);
+
+      cmgs.length=(U8)pdu.len;
+      cmgs.c_pdu=(U8)pdu.len;
+
+      bat_send(ati_bat_get_client(srcId), &cmd);
+    }
+
+#else /* no FF_ATI_BAT */
+
+    /*
+     * send the SMS message using extracted values
+     */
+    ret = sAT_PlusCMGSPdu ( (T_ACI_CMD_SRC)srcId, &pdu );
+
+    if ( ret NEQ AT_EXCT )
+    {
+      cmdCmsError (CMS_ERR_NotPresent);  // use aciErrDesc
+      return (ATI_FAIL);
+    }
+
+#endif /* no FF_ATI_BAT */
+
+    /*
+     *  rCI_OK will emitting +CMGS: <mr>[,<ackpdu>]
+     */
+    src_params->curAtCmd = AT_CMD_CMGS;
+    return ATI_EXCT;
+  }
+}
+
+
+#endif
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_CMD            |
+| STATE   : code                        ROUTINE : atPlusCNMAPdu      |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CNMA command (new message acknowledgement) in PDU mode
+*/
+
+#if defined (SMS_PDU_SUPPORT)
+
+GLOBAL T_ATI_RSLT atPlusCNMAPdu (char *cl, UBYTE srcId)
+{
+  UBYTE          msg_type;
+  static SHORT   n = -1;
+  T_ACI_SM_DATA  pdu = {0};
+  T_ACI_RETURN   ret = AT_FAIL;
+  UBYTE pdu_message_octets_lenth = 0;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+
+
+
+  TRACE_FUNCTION("atPlusCNMAPdu()");
+
+
+
+  if (src_params->text_mode EQ CMD_MODE)
+  {
+    /*
+     * normal command line
+     */
+    if (*cl EQ '\0')
+    {
+      /*
+       * no parameters, like text mode
+       */
+      n = 1;
+    }
+    else
+    {
+      /*
+       * Extract the acknowledge parameter n
+       */
+      length_of_pdu_message = 0;
+      cl = parse(cl,"rr",&n, &length_of_pdu_message);
+      if ( !cl)
+      {
+        cmdCmsError(CMS_ERR_OpNotAllowed);
+        return (ATI_FAIL);
+      }
+
+   
+    
+      switch (n)
+      {
+        case -1:
+        case 0:
+        case 1:
+          n = 1;
+          if (length_of_pdu_message)
+          {
+            src_params->text_mode = TXT_MODE;
+            return (ATI_EXCT);
+          }
+          break;
+        case 2:
+          if (length_of_pdu_message)
+          {
+           src_params->text_mode = TXT_MODE;
+            return (ATI_EXCT);
+          }
+         break;
+        default:
+          cmdCmsError(CMS_ERR_OpNotAllowed);
+          return (ATI_FAIL);
+      }
+    }
+  } /* end of if (src_params->text_mode EQ CMD_MODE) */
+  else
+  {
+    src_params->text_mode = CMD_MODE;
+
+/*
+    calculation of the real length of PDU string
+
+    The entering of PDU is done similarly as specified in command Send Message +CMGS, 
+    except that the format of <ackpdu> is used instead of <pdu> 
+    (i.e. SMSC address field is not present).
+
+    so here, the length of the input needs to divide 2.
+    */
+
+
+    pdu_message_octets_lenth = strlen(cl)/2;
+
+    TRACE_EVENT_P1("pdu_message_octets_lenth == %d",pdu_message_octets_lenth);
+
+    if(pdu_message_octets_lenth NEQ length_of_pdu_message)
+    {
+      cmdCmsError (CMS_ERR_OpNotAllowed);
+      TRACE_EVENT("ERROR: input pdu message length do not match the real length!");
+      return (ATI_FAIL);
+    }
+
+    /*
+     * Input line with pdu is given
+     */
+    pdu_error_detected = FALSE;
+    /*
+     * get the message type
+     */
+    HexToGsm (cl, &msg_type);
+
+    if ((msg_type & 3) EQ 0) // SMS_DELIVER_REPORT
+    {
+      int i;
+      pdu.len = (UBYTE)length_of_pdu_message;
+      for (i=0; i<length_of_pdu_message; i++)
+      {
+        cl = HexToGsm (cl, &pdu.data[i]);
+      }
+    }
+    else
+      pdu_error_detected = TRUE;
+
+    if (pdu_error_detected)
+    {
+      cmdCmsError ( CMS_ERR_InValPduMod );
+      return (ATI_FAIL);
+    }
+  }
+
+ 
+
+  /*
+   * send the SMS command using extracted values
+   */
+  ret = sAT_PlusCNMAPdu ((T_ACI_CMD_SRC)srcId, n, &pdu);
+  switch(ret)
+  {
+    case AT_FAIL:
+      cmdCmsError (CMS_ERR_NotPresent);  // use aciErrDesc
+      /*
+       * no break
+       */
+    /*lint -fallthrough */
+     case AT_CMPL:
+       break;
+     default:
+       TRACE_EVENT("atPlusCNMAPdu() : Error !! Not AT_FAIL or AT_COMPL");
+       break;
+  }
+  return (map_aci_2_ati_rslt(ret));
+}
+#endif
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : atPlusCMGWPdu      |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CMGW command (Write message to memory) in PDU mode.
+*/
+
+#if defined (SMS_PDU_SUPPORT)
+
+GLOBAL T_ATI_RSLT atPlusCMGWPdu (char *cl, UBYTE srcId)
+{
+  T_ACI_SMS_STAT    stat;
+  T_ACI_RETURN      ret = AT_FAIL;
+  static UBYTE      message_status = NOT_PRESENT_8BIT;
+  T_SMS_SET_PRM    *pSMSSetPrm; /* points to SMS parameter set */
+  T_ACI_SM_DATA     pdu;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  pSMSSetPrm = smsShrdPrm.pSetPrm[srcId];
+
+  TRACE_FUNCTION("atPlusCMGWPdu()");
+
+  if (src_params->text_mode EQ CMD_MODE)
+  {
+    /*
+     * normal command line
+     */
+    stat = SMS_STAT_StoUnsent;  /* STO UNSENT as default */
+    /*
+     * Extract the length and status to be parsed from the input pointer cl
+     */
+    cl = parse(cl,"rd",&length_of_pdu_message,&stat);
+    if ( !cl OR length_of_pdu_message EQ 0)
+    {
+      cmdCmsError(CMS_ERR_OpNotAllowed);
+      return (ATI_FAIL);
+    }
+
+    if (stat < SMS_STAT_RecUnread OR stat > SMS_STAT_All)
+    {
+      cmdCmsError(CMS_ERR_OpNotAllowed);
+      return (ATI_FAIL);
+    }
+    else
+    {
+      message_status = (UBYTE)stat;
+    }
+    /*
+     * wait for next input containing the PDU_is_given
+     */
+    src_params->text_mode = TXT_MODE;
+    return (ATI_EXCT);
+  } /* end of if (src_params->text_mode EQ CMD_MODE) */
+  else
+  {
+    UBYTE offset = 0;
+    UBYTE sca_len;
+    UBYTE i;
+    UBYTE pdu_message_octets_lenth = 0;
+
+    src_params->text_mode = CMD_MODE;
+    /*
+     * Input line with pdu is given
+     */
+
+    /* if the character sent is ESC, then abort command CLB 16.11.00 */
+    if (*cl EQ 0x1B)
+    {
+      TRACE_EVENT("Send message command cancelled by user");
+
+      return ATI_CMPL_NO_OUTPUT;
+    }
+
+    pdu_error_detected = FALSE;
+
+    HexToGsm (cl, &sca_len);
+
+    if (sca_len > ((MAX_SMS_ADDR_DIG+1)/2) + 1)
+    {
+      TRACE_ERROR("SCA too long !!!");
+      cmdCmsError(CMS_ERR_OpNotAllowed);
+      return (ATI_FAIL);
+    }
+
+    /*
+    calculation of the real length of PDU string
+
+    The first octet in the input is an indicator of the length of the SMSC information supplied.
+
+    And this Octet and the SMSC content do not count in the real length of PDU string.
+
+    so here, the length of the input needs to minus 2 + sca_len*2 and then divide 2.
+    */
+    pdu_message_octets_lenth = (strlen(cl)-2-sca_len*2)/2;
+
+    TRACE_EVENT_P1("pdu_message_octets_lenth == %d",pdu_message_octets_lenth);
+
+    if(pdu_message_octets_lenth NEQ length_of_pdu_message)
+    {
+      cmdCmsError (CMS_ERR_OpNotAllowed);
+      TRACE_EVENT("ERROR: input pdu message length do not match the real length!");
+      return (ATI_FAIL);
+    }
+
+
+    if (sca_len EQ 0)  /* no SCA given */
+    {
+      offset = CodeRPAddress(pdu.data,
+                                pSMSSetPrm -> sca.c_num,
+                                pSMSSetPrm -> sca.ton,
+                                pSMSSetPrm -> sca.npi,
+                                pSMSSetPrm -> sca.num);
+      cl += 2;
+      pdu.len = length_of_pdu_message + offset;
+    }
+    else
+    {
+      pdu.len = length_of_pdu_message + sca_len + 1;
+    }
+
+    for (i=offset; i<pdu.len AND *cl NEQ '\0' AND i<MAX_SM_LEN; i++)
+    {
+      cl = HexToGsm (cl, &pdu.data[i]);
+    }
+
+    ret = sAT_PlusCMGWPdu ( (T_ACI_CMD_SRC)srcId, message_status, &pdu);
+
+    if ( ret NEQ AT_EXCT )
+    {
+      cmdCmsError (CMS_ERR_NotPresent);  // use aciErrDesc
+      return (ATI_FAIL);
+    }
+    /*
+     *  rCI_OK will emitting +CMGW: <index>
+     */
+    src_params->curAtCmd = AT_CMD_CMGW;
+    return ATI_EXCT;
+  }
+}
+#endif
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : atPlusCMGCPdu      |
++--------------------------------------------------------------------+
+
+  PURPOSE : +CMGC command (Send SMS command) in PDU mode
+*/
+
+#if defined (SMS_PDU_SUPPORT)
+
+GLOBAL T_ATI_RSLT atPlusCMGCPdu (char *cl, UBYTE srcId)
+{
+  T_ACI_RETURN      ret = AT_FAIL;
+  T_ACI_SM_DATA     pdu;
+  T_SMS_SET_PRM    *pSMSSetPrm; /* points to SMS parameter set */
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  pSMSSetPrm = smsShrdPrm.pSetPrm[srcId];
+
+  pdu.len = 0;
+
+  TRACE_FUNCTION("atPlusCMGCPdu()");
+
+  if (src_params->text_mode EQ CMD_MODE)
+  {
+    /*
+     * normal command line
+     */
+   /*
+    * Extract the length to be parsed from the input pointer cl
+    */
+   cl = parse(cl,"r",&length_of_pdu_message);
+   if ( !cl OR length_of_pdu_message EQ 0)
+   {
+     cmdCmsError(CMS_ERR_OpNotAllowed);
+     return (ATI_FAIL);
+   }
+   /*
+    * wait for next input containing the PDU_is_given
+    */
+   src_params->text_mode = TXT_MODE;
+   return (ATI_EXCT);
+  } /* end of if (src_params->text_mode EQ CMD_MODE) */
+  else
+  {
+    UBYTE offset = 0;
+    UBYTE sca_len;
+    UBYTE i;
+    UBYTE pdu_message_octets_lenth = 0;
+
+    src_params->text_mode = CMD_MODE;
+    /*
+     * Input line with pdu is given
+     */
+
+    pdu_error_detected = FALSE;
+
+    HexToGsm (cl, &sca_len);
+
+    if (sca_len > ((MAX_SMS_ADDR_DIG+1)/2) + 1)
+    {
+      TRACE_ERROR("SCA too long !!!");
+      cmdCmsError(CMS_ERR_OpNotAllowed);
+      return (ATI_FAIL);
+    }
+
+    /*
+    calculation of the real length of PDU string
+
+    The first octet in the input is an indicator of the length of the SMSC information supplied.
+
+    And this Octet and the SMSC content do not count in the real length of PDU string.
+
+    so here, the length of the input needs to minus 2 + sca_len*2 and then divide 2.
+    */
+    pdu_message_octets_lenth = (strlen(cl)-2-sca_len*2)/2;
+
+    TRACE_EVENT_P1("pdu_message_octets_lenth == %d",pdu_message_octets_lenth);
+
+    if(pdu_message_octets_lenth NEQ length_of_pdu_message)
+    {
+      cmdCmsError (CMS_ERR_OpNotAllowed);
+      TRACE_EVENT("ERROR: input pdu message length do not match the real length!");
+      return (ATI_FAIL);
+    }    
+
+    if (sca_len EQ 0)  /* no SCA given */
+    {
+      offset = CodeRPAddress(pdu.data,
+                                pSMSSetPrm -> sca.c_num,
+                                pSMSSetPrm -> sca.ton,
+                                pSMSSetPrm -> sca.npi,
+                                pSMSSetPrm -> sca.num);
+      cl += 2;
+      pdu.len = length_of_pdu_message + offset;
+    }
+    else
+    {
+      pdu.len = length_of_pdu_message + sca_len + 1;
+    }
+
+    for (i=offset; i<pdu.len AND *cl NEQ '\0' AND i<MAX_SM_LEN; i++)
+    {
+      cl = HexToGsm (cl, &pdu.data[i]);
+    }
+
+    ret = sAT_PlusCMGCPdu ((T_ACI_CMD_SRC)srcId, &pdu);
+
+    if ( ret NEQ AT_EXCT )
+    {
+      cmdCmsError (CMS_ERR_NotPresent);  // use aciErrDesc
+      return (ATI_FAIL);
+    }
+    /*
+     *  rCI_OK will emitting +CMGC: <mr>[,<ackpdu>]
+     */
+    src_params->curAtCmd = AT_CMD_CMGC;
+    return ATI_EXCT;
+  }
+}
+#endif
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : rCI_PlusCMGLPdu    |
++--------------------------------------------------------------------+
+
+  PURPOSE : handles AT_PlusCMGL call back in PDU mode
+
+*/
+
+#if defined (SMS_PDU_SUPPORT)
+
+GLOBAL void rCI_Plus_Percent_CMGLPdu  ( T_MNSMS_READ_CNF *mnsms_read_cnf, 
+                                        T_ACI_AT_CMD cmd )
+{
+  T_ACI_SMS_STAT   stat;
+
+  USHORT  i         = 0;
+  USHORT  pos       = 0;
+  UBYTE   sca_len;
+  UBYTE  length_sms, length=0;
+  UBYTE  fo, addr_len, dcs, vp_format=TP_VPF_ABSOLUTE;
+  UBYTE  *data_ptr;
+
+  UBYTE srcId = srcId_cb;
+
+#ifndef FF_ATI_BAT
+  CHAR   cvtdAlpha[2*MAX_ALPHA_LEN];
+  USHORT lenCvtdAlpha;
+  T_ACI_PB_TEXT alpha;
+#endif
+
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  TRACE_FUNCTION("rCI_Plus_Percent_CMGLPdu()");
+
+  src_params->curAtCmd = AT_CMD_NONE;
+
+  /* convert status from PSA type to CMH type */
+  cmhSMS_getStatCmh ( mnsms_read_cnf->status, &stat );
+
+  /*
+   * print response and index, status of SMS message
+   */
+  if (cmd EQ AT_CMD_CMGL )
+  {
+    pos = sprintf ( g_sa, "+CMGL: ");
+  }
+  else
+  {
+    pos=sprintf (g_sa, " %s: ", "%CMGL");
+  }
+  pos += sprintf ( g_sa + pos, "%d,%d,", mnsms_read_cnf->rec_num, stat);
+
+#ifdef FF_ATI_BAT
+
+  /*
+  *   Extracting the alphanumeric data from the phonebook at this point
+  *   would defeat the object (testing the BAT message). Having this
+  *   data stored globally represents an easier solution to the
+  *   problem of conveying it here.
+  */
+  if (smsShrdPrm.alpha_len)
+  {
+    pos+=sprints(g_sa+pos,smsShrdPrm.alpha,smsShrdPrm.alpha_len);
+  }
+
+#else
+
+  cmhSMS_getPhbEntry( mnsms_read_cnf->sms_sdu.buf, &alpha, stat);
+
+  /*
+   * print alpha if available
+   */
+  if ( alpha.len NEQ 0 )
+  {
+    utl_chsetFromGsm ( (UBYTE*)alpha.data,
+                       alpha.len,
+                       (UBYTE*)cvtdAlpha,
+                       sizeof(cvtdAlpha),
+                       &lenCvtdAlpha,
+                       GSM_ALPHA_Def );
+    pos += sprints ( g_sa + pos, cvtdAlpha, lenCvtdAlpha );
+  }
+
+#endif /*FF_ATI_BAT*/
+
+  /* length of SCA including length byte and TOA byte */
+  sca_len = mnsms_read_cnf->sms_sdu.buf[0] + 1;
+
+  data_ptr = &mnsms_read_cnf->sms_sdu.buf[sca_len];
+  fo  = *data_ptr++;
+  length++;
+
+  if ((fo & TP_MTI_MASK) NEQ TP_MTI_SMS_STATUS_REP)
+  {
+    if ((fo & TP_MTI_MASK) EQ TP_MTI_SMS_SUBMIT)
+    {
+      /* SMS-SUBMIT */
+      data_ptr++;
+      length++;
+      vp_format = fo & TP_VPF_MASK;
+    }
+    
+    addr_len = *data_ptr;
+    length += 4 + (addr_len+1)/2;
+    
+    /* data_ptr points to TP-DCS now */
+    data_ptr += 3 + (addr_len+1)/2;
+    
+    dcs = *data_ptr++;
+    
+    switch (vp_format)
+    {
+    /*
+    * Check validity period format bit 4 and 3
+      */
+    case TP_VPF_NOT_PRESENT:  // TP-VP not present
+      break;
+    case TP_VPF_RELATIVE:     // TP-VP relative format
+      length++;
+      data_ptr++;
+      break;
+    case TP_VPF_ENHANCED:     // TP-VP enhanced format
+    case TP_VPF_ABSOLUTE:     // TP-VP absolute format
+      length += 7;
+      data_ptr += 7;
+      break;
+    }
+    
+    /* data_ptr points to TP-UDL now,
+    * calculate the length excluding SCA octets
+    */
+    if (cmhSMS_getAlphabetPp (dcs) EQ 0)
+      length_sms = length + (*data_ptr * 7 + 7)/8 + 1; // 7 bit alphabet
+    else
+      length_sms = length + *data_ptr + 1;
+    
+    pos += sprintf ( g_sa + pos, ",%d", length_sms );
+    io_sendMessage ( srcId, g_sa, ATI_NORMAL_OUTPUT );
+    pos = 0;
+  }
+  else
+  {
+    length_sms=((mnsms_read_cnf->sms_sdu.l_buf+7)/8);
+    pos += sprintf ( g_sa + pos, ",%d,", length_sms-sca_len );
+    sca_len = 0;
+  }
+
+  /*
+   * Print PDU + service centre address
+   */
+  for (i=0;i<(USHORT)(sca_len+length_sms);i++)
+    pos = GsmToHex (mnsms_read_cnf->sms_sdu.buf[i], g_sa, pos);
+
+  /*
+   * Send response
+   */
+  io_sendMessage ( srcId, g_sa, ATI_NORMAL_OUTPUT );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : rCI_PlusCMGRPdu    |
++--------------------------------------------------------------------+
+
+  PURPOSE : handles AT_PlusCMGR call back in PDU mode
+
+*/
+
+#if defined (SMS_PDU_SUPPORT)
+
+GLOBAL void rCI_Plus_Percent_CMGRPdu (T_MNSMS_READ_CNF * mnsms_read_cnf,
+                                      T_ACI_AT_CMD cmd)
+{
+  USHORT  pos       = 0;
+  T_ACI_SMS_STAT   stat;
+  USHORT  i;
+
+  UBYTE  sca_len;
+  UBYTE  length_sms, length=0;
+  UBYTE  fo, addr_len, dcs, vp_format=TP_VPF_ABSOLUTE;
+  UBYTE  *data_ptr;
+
+  UBYTE srcId = srcId_cb;
+
+#ifndef FF_ATI_BAT
+  CHAR   cvtdAlpha[2*MAX_ALPHA_LEN];
+  USHORT lenCvtdAlpha;
+  T_ACI_PB_TEXT alpha;
+#endif
+
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  TRACE_FUNCTION("rCI_Plus_Percent_CMGRPdu()");
+
+  src_params->curAtCmd = AT_CMD_NONE;
+
+  /*
+   * print response for SMS message
+   */
+  if (cmd EQ AT_CMD_CMGR)
+  {
+    pos = sprintf ( g_sa, "+CMGR: ");
+  }
+  else
+  {
+    pos=sprintf (g_sa, " %s: ", "%CMGR");
+  }
+
+  /* convert status from PSA type to CMH type */
+  cmhSMS_getStatCmh ( mnsms_read_cnf->status, &stat );
+
+  /*
+   * print status of the message
+   */
+  pos += sprintf ( g_sa + pos, "%d,", stat );
+
+#ifdef FF_ATI_BAT
+
+  /*
+  *   Extracting the alphanumeric data from the phonebook at this point
+  *   would defeat the object (testing the BAT message). Having this
+  *   data stored globally represents a quick and dirty solution to the
+  *   problem of conveying it here.
+  */
+  if (smsShrdPrm.alpha_len)
+  {
+    pos+=sprints(g_sa+pos,smsShrdPrm.alpha,smsShrdPrm.alpha_len);
+  }
+
+#else
+
+  cmhSMS_getPhbEntry( mnsms_read_cnf->sms_sdu.buf, &alpha, stat);
+
+  /*
+   * print alpha if available
+   */
+  if ( alpha.len NEQ 0 )
+  {
+    utl_chsetFromGsm ( (UBYTE*)alpha.data,
+                       alpha.len,
+                       (UBYTE*)cvtdAlpha,
+                       sizeof(cvtdAlpha),
+                       &lenCvtdAlpha,
+                       GSM_ALPHA_Def );
+    pos += sprints ( g_sa + pos, cvtdAlpha, lenCvtdAlpha );
+  }
+
+#endif
+
+  /* length of SCA including length byte and TOA byte */
+  sca_len = mnsms_read_cnf->sms_sdu.buf[0] + 1;
+
+  data_ptr = &mnsms_read_cnf->sms_sdu.buf[sca_len];
+  fo  = *data_ptr++;
+  length++;
+
+  if ((fo & TP_MTI_MASK) NEQ TP_MTI_SMS_STATUS_REP)
+  {
+    if ((fo & TP_MTI_MASK) EQ TP_MTI_SMS_SUBMIT)
+    {
+      /* SMS-SUBMIT */
+      data_ptr++;
+      length++;
+      vp_format = fo & TP_VPF_MASK;
+    }
+    
+    addr_len = *data_ptr;
+    length += 4 + (addr_len+1)/2;
+    
+    /* data_ptr points to TP-DCS now */
+    data_ptr += 3 + (addr_len+1)/2;
+    
+    dcs = *data_ptr++;
+    
+    switch (vp_format)
+    {
+    /*
+    * Check validity period format bit 4 and 3
+      */
+    case TP_VPF_NOT_PRESENT:  // TP-VP not present
+      break;
+    case TP_VPF_RELATIVE:     // TP-VP relative format
+      length++;
+      data_ptr++;
+      break;
+    case TP_VPF_ENHANCED:     // TP-VP enhanced format
+    case TP_VPF_ABSOLUTE:     // TP-VP absolute format
+      length += 7;
+      data_ptr += 7;
+      break;
+    }
+    
+    /* data_ptr points to TP-UDL now,
+    * calculate the length excluding SCA octets
+    */
+    if (cmhSMS_getAlphabetPp (dcs) EQ 0)
+      length_sms = length + (*data_ptr * 7 + 7)/8 + 1; // 7 bit alphabet
+    else
+      length_sms = length + *data_ptr + 1;
+    
+    pos += sprintf ( g_sa + pos, ",%d", length_sms );
+    io_sendMessage ( srcId, g_sa, ATI_NORMAL_OUTPUT );
+    pos = 0;
+  }
+  else
+  {
+    length_sms=((mnsms_read_cnf->sms_sdu.l_buf+7)/8);
+    pos += sprintf ( g_sa + pos, ",%d,", length_sms-sca_len );
+    sca_len = 0;
+  }
+
+  /*
+   * Print PDU + service centre address
+   */
+  /*If the SMS length recevied incorrectly (length_sms > SIM_PDU_LEN)
+    then there is a chance of reading the buf[] beyond SIM_PDU_LEN. 
+    By using the MINIMUM macro the max length limit
+    to SIM_PDU_LEN if the length of SMS is greater than SIM_PDU_LEN 
+   */
+  length_sms = MINIMUM (sca_len+length_sms, SIM_PDU_LEN);
+  for (i=0;i<(USHORT)length_sms;i++)
+    pos = GsmToHex (mnsms_read_cnf->sms_sdu.buf[i], g_sa, pos);
+
+  /*
+   * Send response
+   */
+  io_sendMessage ( srcId, g_sa, ATI_NORMAL_OUTPUT );
+}
+#endif
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : rCI_PlusCMSSPdu    |
++--------------------------------------------------------------------+
+
+  PURPOSE : handles AT_PlusCMSS call back in PDU mode
+
+*/
+
+GLOBAL void rCI_PlusCMSSPdu (T_MNSMS_SUBMIT_CNF * mnsms_submit_cnf)
+{
+  USHORT pos       = 0;
+  UBYTE  length;
+  USHORT i;
+  UBYTE  srcId = srcId_cb;
+  UBYTE sca_len;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  TRACE_FUNCTION("rCI_PlusCMSSPdu()");
+
+  src_params->curAtCmd = AT_CMD_NONE;
+
+  pos=sprintf(g_sa,"+CMSS: %d", mnsms_submit_cnf->tp_mr);
+
+
+  if (smsShrdPrm.CSMSservice EQ CSMS_SERV_GsmPh2Plus)
+  {
+    if (mnsms_submit_cnf->sms_sdu.l_buf)
+    {
+      pos+=sprintf(g_sa+pos, ",\"");  /* parameter shall be bounded by double quote characters, see 07.07 <ackpdu> */
+      sca_len = mnsms_submit_cnf->sms_sdu.buf[0] + 1;
+      length = ((mnsms_submit_cnf->sms_sdu.l_buf+7)/8);
+
+      /*
+       * Print ACK PDU (without SCA field)
+       */
+      for (i=sca_len; i<length; i++)
+        pos = GsmToHex (mnsms_submit_cnf->sms_sdu.buf[i], g_sa, pos);
+
+      pos+=sprintf(g_sa+pos, "\"");
+    }
+  }
+
+  /*
+   * Send response
+   */
+  io_sendMessage ( srcId, g_sa, ATI_NORMAL_OUTPUT );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : rCI_PlusCMGSPdu    |
++--------------------------------------------------------------------+
+
+  PURPOSE : handles AT_PlusCMGS call back in PDU mode
+
+*/
+
+GLOBAL void rCI_PlusCMGSPdu (T_MNSMS_SUBMIT_CNF * mnsms_submit_cnf)
+{
+  USHORT pos       = 0;
+  UBYTE  length;
+  UBYTE  srcId = srcId_cb;
+  USHORT i;
+  UBYTE sca_len;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  TRACE_FUNCTION("rCI_PlusCMGSPdu()");
+
+
+  src_params->curAtCmd = AT_CMD_NONE;
+
+  pos=sprintf(g_sa,"+CMGS: %d", mnsms_submit_cnf->tp_mr);
+
+
+  if (smsShrdPrm.CSMSservice EQ CSMS_SERV_GsmPh2Plus)
+  {
+    if (mnsms_submit_cnf->sms_sdu.l_buf)
+    {
+      pos+=sprintf(g_sa+pos, ",\"");  /* parameter shall be bounded by double quote characters, see 07.07 <ackpdu> */
+      sca_len = mnsms_submit_cnf->sms_sdu.buf[0] + 1;
+      length = ((mnsms_submit_cnf->sms_sdu.l_buf+7)/8);
+
+      /*
+       * Print ACK PDU (without SCA field)
+       */
+      for (i=sca_len; i<length; i++)
+        pos = GsmToHex (mnsms_submit_cnf->sms_sdu.buf[i], g_sa, pos);
+
+      pos+=sprintf(g_sa+pos, "\"");
+    }
+  }
+
+  /*
+   * Send response
+   */
+  io_sendMessageEx( srcId, g_sa,
+                   (T_ATI_OUTPUT_TYPE) (ATI_NORMAL_OUTPUT |
+                    ATI_BEGIN_CRLF_OUTPUT |
+                    ATI_END_CRLF_OUTPUT));
+
+}
+
+#ifdef REL99
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : rCI_PercentCMGRSPdu|
++--------------------------------------------------------------------+
+
+  PURPOSE : handles AT_PlusCMGRS call back in PDU mode
+
+*/
+
+GLOBAL void rCI_PercentCMGRSPdu ( UBYTE mode,
+                                  T_MNSMS_RETRANS_CNF * mnsms_retrans_cnf,
+                                  T_MNSMS_SEND_PROG_IND * mnsms_send_prog_ind )
+{
+  USHORT pos       = 0;
+  UBYTE  length;
+  UBYTE  srcId = srcId_cb;
+  USHORT i;
+  UBYTE sca_len = mnsms_retrans_cnf->sms_sdu.buf[0] + 1;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  TRACE_FUNCTION("rCI_PercentCMGRSPdu()");
+
+
+  src_params->curAtCmd = AT_CMD_NONE;
+
+  if (mode EQ CMGRS_MODE_MANUAL_RETRANS AND mnsms_retrans_cnf NEQ NULL)
+  {
+    pos=sprintf(g_sa,"%s: %d", "%CMGRS", mnsms_retrans_cnf->tp_mr);
+
+
+    if (smsShrdPrm.CSMSservice EQ CSMS_SERV_GsmPh2Plus)
+    {
+      pos+=sprintf(g_sa+pos, ",");
+      length = ((mnsms_retrans_cnf->sms_sdu.l_buf+7)/8) - sca_len;
+
+      /*
+       * Print ACK PDU (without SCA field)
+       */
+      for (i=sca_len;i<length;i++)
+        pos = GsmToHex (mnsms_retrans_cnf->sms_sdu.buf[i], g_sa, pos);
+    }
+  }
+  else if (mode EQ CMGRS_MODE_ENABLE_AUTO_RETRANS AND mnsms_send_prog_ind NEQ NULL)
+  {
+    pos=sprintf(g_sa,"%s: 1,%d,%d", "%CMGRS", 
+                                    mnsms_send_prog_ind->resend_count,
+                                    mnsms_send_prog_ind->max_retrans);
+  }
+  else
+  {
+    TRACE_ERROR("%CMGRS: wrong combination of parameters");
+    return;
+  }
+
+  /*
+   * Send response
+   */
+  io_sendMessageEx( srcId, g_sa,
+                    (T_ATI_OUTPUT_TYPE)(ATI_NORMAL_OUTPUT |
+                    ATI_BEGIN_CRLF_OUTPUT |
+                    ATI_END_CRLF_OUTPUT));
+
+}
+#endif
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : rCI_PlusCMGCPdu    |
++--------------------------------------------------------------------+
+
+  PURPOSE : handles AT_PlusCMGC call back in PDU mode
+
+*/
+
+GLOBAL void rCI_PlusCMGCPdu (T_MNSMS_COMMAND_CNF * mnsms_command_cnf)
+{
+  USHORT pos       = 0;
+  UBYTE  length;
+  UBYTE  srcId = srcId_cb;
+  USHORT i;
+  UBYTE sca_len;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  TRACE_FUNCTION("rCI_PlusCMGCPdu()");
+
+  src_params->curAtCmd = AT_CMD_NONE;
+
+  pos=sprintf(g_sa,"+CMGC: %d", mnsms_command_cnf->tp_mr);
+
+  if (smsShrdPrm.CSMSservice EQ CSMS_SERV_GsmPh2Plus)
+  {
+    if (mnsms_command_cnf->sms_sdu.l_buf)
+    {
+      pos+=sprintf(g_sa+pos, ",\"");  /* parameter shall be bounded by double quote characters, see 07.07 <ackpdu> */
+      sca_len = mnsms_command_cnf->sms_sdu.buf[0] + 1;
+      length = ((mnsms_command_cnf->sms_sdu.l_buf+7)/8);
+
+      /*
+       * Print ACK PDU (without SCA field)
+       */
+      for (i=sca_len; i<length; i++)
+        pos = GsmToHex (mnsms_command_cnf->sms_sdu.buf[i], g_sa, pos);
+
+      pos+=sprintf(g_sa+pos, "\"");
+    }
+  }
+
+  /*
+   * Send response
+   */
+  io_sendMessageEx( srcId, g_sa,
+                   (T_ATI_OUTPUT_TYPE) (ATI_NORMAL_OUTPUT |
+                    ATI_BEGIN_CRLF_OUTPUT |
+                    ATI_END_CRLF_OUTPUT));
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : rCI_PlusCMTPdu     |
++--------------------------------------------------------------------+
+
+  PURPOSE : handles AT_PlusCMT unsolicited message in PDU mode
+
+*/
+
+#if defined (SMS_PDU_SUPPORT)
+
+GLOBAL void rCI_PlusCMTPdu (T_MNSMS_MESSAGE_IND * mnsms_message_ind)
+{
+  USHORT  pos       = 0;
+  UBYTE   l_sms_with_sca;
+  UBYTE   l_sms_without_sca;
+  UBYTE   srcId = srcId_cb;
+
+#ifndef FF_ATI_BAT
+  CHAR    cvtdAlpha[2*MAX_ALPHA_LEN];
+  USHORT  lenCvtdAlpha;
+  T_ACI_PB_TEXT alpha;
+  T_ACI_SMS_STAT   stat;
+#endif
+
+  USHORT i;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  UBYTE sca_len = mnsms_message_ind->sms_sdu.buf[0] + 1;
+
+  TRACE_FUNCTION("rCI_PlusCMTPdu()");
+
+  src_params->curAtCmd = AT_CMD_NONE;
+
+  /*
+   * print response for SMS message
+   */
+  pos = sprintf ( g_sa, "+CMT: ");
+
+  /*
+   * print alpha if available
+   */
+#ifdef FF_ATI_BAT
+
+  /*
+  *   Extracting the alphanumeric data from the phonebook at this point
+  *   would defeat the object (testing the BAT message). Having this
+  *   data stored globally represents a quick and dirty solution to the
+  *   problem of conveying it here.
+  */
+  if (smsShrdPrm.alpha_len)
+  {
+    pos+=sprints(g_sa+pos,smsShrdPrm.alpha,smsShrdPrm.alpha_len);
+  }
+
+#else
+
+  /* convert status from PSA type to CMH type */
+  cmhSMS_getStatCmh ( mnsms_message_ind->status, &stat );
+
+  cmhSMS_getPhbEntry( mnsms_message_ind->sms_sdu.buf, &alpha, stat);
+
+
+  if ( alpha.len NEQ 0 )
+  {
+    utl_chsetFromGsm ( (UBYTE*)alpha.data,
+                       alpha.len,
+                       (UBYTE*)cvtdAlpha,
+                       sizeof(cvtdAlpha),
+                       &lenCvtdAlpha,
+                       GSM_ALPHA_Def );
+    pos += sprints ( g_sa + pos, cvtdAlpha, lenCvtdAlpha );
+  }
+
+#endif /*FF_ATI_BAT*/
+
+  l_sms_with_sca = ((mnsms_message_ind->sms_sdu.l_buf+7)/8);
+  l_sms_without_sca = l_sms_with_sca - sca_len;
+
+  pos += sprintf ( g_sa + pos, ",%d", l_sms_without_sca );
+  io_sendIndication ( srcId, g_sa, ATI_FORCED_OUTPUT );
+
+  pos = 0;
+
+  /*
+   * Print PDU + service centre address field
+   */
+  for (i=0;i<(USHORT)l_sms_with_sca;i++)
+    pos = GsmToHex (mnsms_message_ind->sms_sdu.buf[i], g_sa, pos);
+
+  /*
+   * Send response
+   */
+  io_sendIndication ( srcId, g_sa, ATI_FORCED_OUTPUT );
+
+}
+#endif
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : rCI_PlusCBMPdu     |
++--------------------------------------------------------------------+
+
+  PURPOSE : handles Cell Broadcast unsolicited message in PDU mode
+
+*/
+
+#if defined (SMS_PDU_SUPPORT)
+
+GLOBAL void rCI_PlusCBMPdu (T_MMI_CBCH_IND * mmi_cbch_ind)
+{
+  int i;
+  USHORT pos = 0;
+  UBYTE srcId = srcId_cb;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+  TRACE_FUNCTION("rCI_PlusCBMPdu()");
+
+  src_params->curAtCmd = AT_CMD_NONE;
+
+  /*
+   * print response for CBM message
+   */
+  pos = sprintf ( g_sa, "+CBM: ");
+  pos += sprintf ( g_sa + pos, "%d", (int)mmi_cbch_ind->cbch_len );
+
+  io_sendIndication ( srcId, g_sa, ATI_FORCED_OUTPUT );
+
+  pos = 0;
+
+  for (i = 0; i < (int)mmi_cbch_ind->cbch_len; i++)
+    pos = GsmToHex (mmi_cbch_ind->cbch_msg[i], g_sa, pos);
+
+  io_sendMessageEx ( srcId, g_sa, (T_ATI_OUTPUT_TYPE)(ATI_INDICATION_OUTPUT +
+                                ATI_FORCED_OUTPUT +
+                                ATI_END_CRLF_OUTPUT ));
+
+}
+#endif
+
+
+#if defined (SMS_PDU_SUPPORT)
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : rCI_PlusCDSPdu     |
++--------------------------------------------------------------------+
+
+  PURPOSE : handles Status Indication unsolicited message in PDU mode
+
+*/
+GLOBAL void rCI_PlusCDSPdu (T_MNSMS_STATUS_IND * mnsms_status_ind)
+{
+  USHORT  pos       = 0;
+  UBYTE   l_sms_with_sca;
+  UBYTE   l_sms_without_sca;
+  UBYTE sca_len = mnsms_status_ind->sms_sdu.buf[0] + 1;
+  USHORT i;
+  UBYTE srcId = srcId_cb;
+  T_ATI_SRC_PARAMS *src_params = find_element (ati_src_list, srcId, search_ati_src_id);
+
+
+  TRACE_FUNCTION("rCI_PlusCDSPdu()");
+
+  src_params->curAtCmd = AT_CMD_NONE;
+
+  /*
+   * print response for SMS message
+   */
+  pos = sprintf ( g_sa, "+CDS: ");
+
+  l_sms_with_sca = ((mnsms_status_ind->sms_sdu.l_buf+7)/8);
+  l_sms_without_sca = l_sms_with_sca - sca_len;
+
+  pos += sprintf ( g_sa + pos, "%d", l_sms_without_sca );
+
+  io_sendIndication ( srcId, g_sa, ATI_FORCED_OUTPUT );
+
+  pos = 0;
+
+  /*
+   * Print PDU + service centre address field
+   */
+  for (i=0;i<(USHORT)l_sms_with_sca;i++)
+    pos = GsmToHex (mnsms_status_ind->sms_sdu.buf[i], g_sa, pos);
+
+  /*
+   * Send response
+   */
+  io_sendMessageEx ( srcId, g_sa, (T_ATI_OUTPUT_TYPE)(ATI_INDICATION_OUTPUT +
+                                ATI_FORCED_OUTPUT +
+                                ATI_END_CRLF_OUTPUT) );
+
+}
+#endif /* SMS_PDU_SUPPORT */
+
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : HexMessage         |
++--------------------------------------------------------------------+
+
+  PURPOSE : converts a sms message to HEX and fill it into a buffer.
+
+*/
+
+/* does not seem to be used */
+/*GLOBAL USHORT HexMessage (T_ACI_SM_DATA * data, UBYTE length, char * buffer, USHORT pos)
+{
+  int i;
+
+  pos = GsmToHex (data->len, buffer, pos);
+
+  for (i=0;i<(int)length;i++)
+    pos = GsmToHex (data->data[i], buffer, pos);
+
+  return pos;
+} */
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : HexScts            |
++--------------------------------------------------------------------+
+
+  PURPOSE : converts a service centre timestamp to HEX and fill it into a buffer.
+
+*/
+
+/* doesn't seem to be used... */
+/*GLOBAL USHORT HexScts (T_ACI_VP_ABS * scts, char * buffer, USHORT pos)
+{
+  UBYTE tz;
+  
+  TRACE_EVENT_P1("TZ =%x", scts->timezone);
+  
+  pos = GsmToHex ((UBYTE)((scts->year[1]<<4)+scts->year[0]),
+                  buffer, pos);
+  pos = GsmToHex ((UBYTE)((scts->month[1]<<4)+scts->month[0]),
+                  buffer, pos);
+  pos = GsmToHex ((UBYTE)((scts->day[1]<<4)+scts->day[0]),
+                  buffer, pos);
+  pos = GsmToHex ((UBYTE)((scts->hour[1]<<4)+scts->hour[0]),
+                  buffer, pos);
+  pos = GsmToHex ((UBYTE)((scts->minute[1]<<4)+scts->minute[0]),
+                  buffer, pos);
+  pos = GsmToHex ((UBYTE)((scts->second[1]<<4)+scts->second[0]),
+                  buffer, pos);
+
+  tz = cmhSMS_setTimezone(scts->timezone);
+  pos = GsmToHex (tz, buffer, pos);
+  
+  return pos;
+}*/
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : GsmToHex           |
++--------------------------------------------------------------------+
+
+  PURPOSE : converts a GSM character to HEX and fill it into a buffer.
+
+*/
+
+GLOBAL USHORT GsmToHex (UBYTE in, char * buffer, USHORT pos)
+{
+  const UBYTE  hexVal[17] = {"0123456789ABCDEF"};
+
+  buffer[pos]   = hexVal[ in >> 4    ];
+  buffer[pos+1] = hexVal[ in &  0x0F ];
+  buffer[pos+2] = '\0';
+  return pos+2;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : HexAdress          |
++--------------------------------------------------------------------+
+
+  PURPOSE : converts a adress to HEX and fill it into a buffer.
+
+*/
+
+#if 0
+GLOBAL USHORT HexAdress (CHAR * adress, UBYTE ton, UBYTE npi, char * buffer, USHORT pos)
+{
+  int i;
+  int len;
+
+  len = (strlen (adress)+1)/2;
+
+  pos = GsmToHex  ((UBYTE)(len+1), buffer, pos);
+
+  pos = GsmToHex  ((UBYTE)(0x80 + (ton<<4) + npi), buffer, pos);
+
+  for (i=0;i<len;i++)
+  {
+    if (i EQ len-1)
+    {
+      /*
+       * last two digits
+       */
+      if (strlen(adress) & 1)
+      {
+        pos = GsmToHex ((UBYTE)(0xF0 + (adress[2*i] - 0x30)), buffer, pos);
+        continue;
+      }
+    }
+    pos = GsmToHex ((UBYTE)(((adress [2*i+1]-0x30) << 4) +
+                     (adress [2*i] - 0x30)), buffer, pos);
+  }
+  return pos;
+}
+#endif /* 0 */
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : HexAdressTP        |
++--------------------------------------------------------------------+
+
+  PURPOSE : converts a adress to HEX and fill it into a buffer for TP-adresses.
+
+*/
+
+#if 0
+GLOBAL USHORT HexAdressTP (CHAR * adress, UBYTE ton, UBYTE npi, char * buffer, USHORT pos)
+{
+  int i;
+  int len;
+
+  len = (strlen (adress)+1)/2;
+
+  if ( ton EQ 0x05 AND strlen (adress) NEQ 4 ) /* PATCH VO - if (patch) else ... */
+    pos = GsmToHex  ((UBYTE)(strlen (adress) * 2), g_sa, pos);
+  else
+    pos = GsmToHex  ((UBYTE)strlen(adress), g_sa, pos);
+
+  pos = GsmToHex  ((UBYTE)(0x80 + (ton<<4) + npi), g_sa, pos);
+
+  if ( ton EQ 0x05 AND strlen (adress) NEQ 4 ) /* PATCH VO - if (patch) else ... */
+  {
+    for (i=0;i<(int)strlen (adress);i++)
+      pos = GsmToHex ((UBYTE)adress[i], g_sa, pos);
+  }
+  else
+  {
+    for (i=0;i<len;i++)
+    {
+      if (i EQ len-1)
+      {
+        /*
+         * last two digits
+         */
+        if (strlen(adress) & 1)
+        {
+          pos = GsmToHex ((UBYTE)(0xF0 + (adress[2*i] - 0x30)), g_sa, pos);
+          continue;
+        }
+      }
+      pos = GsmToHex ((UBYTE)(((adress [2*i+1]-0x30) << 4) + (adress [2*i] - 0x30)),
+                      g_sa, pos);
+    }
+  }
+  return pos;
+}
+#endif /* 0 */
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : HexToGsm           |
++--------------------------------------------------------------------+
+
+  PURPOSE : converts a HEX value to the GSM character.
+
+*/
+
+GLOBAL char * HexToGsm (char * cl, UBYTE * value)
+{
+  int i;
+  UBYTE character;
+
+  /*
+   * initialise the output value
+   */
+  *value = 0;
+
+  /*
+   * for both nibbles
+   */
+  for (i=0;i<2;i++)
+  {
+    /*
+     * shift the result of the last loop
+     */
+    *value = (*value) << 4;
+
+    /*
+     * Isolate next nibble in ASCII
+     */
+    character = toupper(*cl++);
+
+    /*
+     * convert Nibble character to value
+     */
+    switch (character)
+    {
+      case 'A':
+      case 'B':
+      case 'C':
+      case 'D':
+      case 'E':
+      case 'F':
+        *value = *value + (character - 'A' + 10);
+        break;
+      default:
+        /*
+         * 0-9
+         */
+        *value = *value + (character - '0');
+        break;
+    }
+  }
+
+  /*
+   * return pointer to the rest of PDU
+   */
+  return cl;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : GSMAddress         |
++--------------------------------------------------------------------+
+
+  PURPOSE : converts a adress coded with HEX values to the internal
+            data structures.
+
+*/
+
+/* does not seem to be  used */
+#if 0
+GLOBAL char * GSMAddress (char * cl, char * address, T_ACI_TOA *tosca)
+{
+  int i, j;
+  UBYTE value;
+  UBYTE len;
+  UBYTE digit;
+
+  /*
+   * calculate the number of octets which are used for the address
+   */
+
+  cl = HexToGsm (cl, &value);
+  if (value EQ 0)   /* SCA not given */
+  {
+    address[0] = 0;
+    return cl;
+  }
+  len = value - 1;
+
+  /*
+   * check against maximum value
+   */
+  if (len > MAX_SMS_ADDR_DIG/2)
+  {
+    pdu_error_detected = TRUE;
+    return cl;
+  }
+
+  /*
+   * calculate the type of number and numbering plan identification
+   */
+  cl = HexToGsm (cl, &value);
+
+  tosca->ton = (value >> 4) & 7;
+  tosca->npi = value & 0x0F;
+
+
+  /*
+   * convert the digits
+   */
+  j = 0;
+  for (i = 0; i < (int)len; i++)
+  {
+    cl = HexToGsm (cl, &value);
+
+    /*
+     * check digit n
+     */
+    address[j++] = (value & 0x0F) + 0x30;
+    /*
+     * check digit n+1
+     */
+    digit = (value >> 4) & 0x0F;
+    if (digit < 10)
+      address[j++] = digit + 0x30;
+  }
+  /*
+   * string termination
+   */
+  address[j] = 0;
+
+  /*
+   * return pointer to the rest of the PDU
+   */
+  return cl;
+}
+#endif /* 0 */
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : GSMAddressTP       |
++--------------------------------------------------------------------+
+
+  PURPOSE : converts a TP-adress coded with HEX values to the internal
+            data structures.
+
+*/
+
+/* does not seem to be used */
+#if 0
+GLOBAL char * GSMAddressTP (char * cl, char * address, T_ACI_TOA *toda)
+{
+  int i, j;
+  UBYTE value;
+  UBYTE len;
+  UBYTE digit;
+
+  /*
+   * calculate the number of octets which are used for the address
+   */
+  cl = HexToGsm (cl, &value);
+  len = (value + 1)/2;
+
+  /*
+   * check against maximum value
+   */
+  if (len > MAX_SMS_ADDR_DIG/2)
+  {
+    pdu_error_detected = TRUE;
+    return cl;
+  }
+  /*
+   * calculate the type of number and numbering plan identification
+   */
+  cl = HexToGsm (cl, &value);
+
+  toda->ton = (value >> 4) & 7;
+  toda->npi = value & 0x0F;
+
+  /*
+   * convert the digits
+   */
+  j = 0;
+  for (i=0;i<(int)len;i++)
+  {
+    cl = HexToGsm (cl, &value);
+
+    /*
+     * check digit n
+     */
+    address[j++] = (value & 0x0F) + 0x30;
+    /*
+     * check digit n+1
+     */
+    digit = (value >> 4) & 0x0F;
+    if (digit < 10)
+      address[j++] = digit + 0x30;
+  }
+  /*
+   * string termination
+   */
+  address[j] = 0;
+
+  /*
+   * return pointer to the rest of the PDU
+   */
+  return cl;
+}
+#endif /* 0 */
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-F&D (8411)              MODULE  : ACI_PDU            |
+| STATE   : code                        ROUTINE : GSMMessage         |
++--------------------------------------------------------------------+
+
+  PURPOSE : converts a sms message from HEX and fill it into a buffer.
+
+*/
+
+#if 0
+GLOBAL char *GSMMessage (char *cl, UBYTE *data, SHORT oct_length, SHORT max_length)
+{
+  SHORT i;
+
+  /*
+   * check against maximum value
+   */
+  if (oct_length > max_length)
+  {
+    pdu_error_detected = TRUE;
+    return cl;
+  }
+  memset (data, 0, max_length);
+
+  /*
+   * copy message
+   */
+  for (i = 0; i < oct_length; i++)
+    cl = HexToGsm (cl, &data[i]);
+
+  return cl;
+}
+#endif /* 0 */
+
+#endif
+
+#endif /* ATI_PDU_C */