--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/g23m-aci/aci/cmh_ccq.c	Tue Oct 11 02:02:43 2016 +0000
@@ -0,0 +1,1609 @@
+/* 
++----------------------------------------------------------------------------- 
+|  Project :  GSM-PS (6147)
+|  Modul   :  CMH_CCQ
++----------------------------------------------------------------------------- 
+|  Copyright 2002 Texas Instruments Berlin, AG 
+|                 All rights reserved. 
+| 
+|                 This file is confidential and a trade secret of Texas 
+|                 Instruments Berlin, AG 
+|                 The receipt of or possession of this file does not convey 
+|                 any rights to reproduce or disclose its contents or to 
+|                 manufacture, use, or sell anything it may describe, in 
+|                 whole, or in part, without the specific written consent of 
+|                 Texas Instruments Berlin, AG. 
++----------------------------------------------------------------------------- 
+|  Purpose :  This module provides the query functions related to the
+|             protocol stack adapter for mobility management.
++----------------------------------------------------------------------------- 
+*/ 
+
+#ifndef CMH_CCQ_C
+#define CMH_CCQ_C
+#endif
+
+/*==== INCLUDES ===================================================*/
+
+#include "aci_all.h"
+#include "aci_cmh.h"
+
+#ifdef FAX_AND_DATA
+#include "aci_fd.h"
+#endif    /* of #ifdef FAX_AND_DATA */
+
+#include "psa.h"
+#include "psa_cc.h"
+#include "cmh.h"
+#include "cmh_cc.h"
+
+#include "aoc.h"
+#include "audio.h"
+
+#include "dti_conn_mng.h"
+#include "psa_sim.h"
+#include "cmh_sim.h"
+#include "psa_mm.h"
+
+/*==== CONSTANTS ==================================================*/
+#ifdef TI_PS_FF_AT_P_CMD_RDLB
+EXTERN T_ACI_CC_REDIAL_BLACKL * cc_blacklist_ptr;
+#endif /* TI_PS_FF_AT_P_CMD_RDLB */
+
+const UBYTE aci_clcc_dir [5][2] = {
+{ NO_VLD_CT, NO_VLD_CT },
+{ CLCC_DIR_MOC, CLCC_DIR_MOC },
+{ CLCC_DIR_MTC, CLCC_DIR_MTC },
+{ CLCC_DIR_MOC, CLCC_DIR_MOC_NI },
+{ CLCC_DIR_MOC, CLCC_DIR_MOC_RDL }
+};
+
+/*==== EXPORT =====================================================*/
+
+/*==== VARIABLES ==================================================*/
+#ifdef TI_PS_FF_AT_P_CMD_CUSCFG
+EXTERN T_ACI_CUSCFG_PARAMS cuscfgParams;
+#endif /* TI_PS_FF_AT_P_CMD_CUSCFG */
+
+GLOBAL T_PCEER causeMod = P_CEER_mod;     /* Hold which module caused the extended error */
+GLOBAL SHORT causeCeer;      /* Hold extended error for sim, mm and ss */
+EXTERN UBYTE std;
+
+/*==== FUNCTIONS ==================================================*/
+LOCAL T_ACI_RETURN qAT_plus_percent_CLCC( T_ACI_CMD_SRC srcId,
+                                          T_ACI_CLCC_CALDESC *calLst,
+                                          T_ACI_AT_CMD at_cmd_id,
+                                          SHORT rdlcId );
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_PlusCSTA             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CSTA? AT command
+            which returns the current setting for type of address.
+
+            <toa>:   type of address.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCSTA ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_TOA * toa )
+{
+  T_CC_CMD_PRM * pCCCmdPrm; /* points to CC command parameters */
+
+  TRACE_FUNCTION ("qAT_PlusCSTA()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  pCCCmdPrm = &cmhPrm[srcId].ccCmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * fill in parameters
+ *-------------------------------------------------------------------
+ */
+  *toa = pCCCmdPrm -> CSTAtoa;
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_PlusCMOD             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CMOD? AT command
+            which returns the current setting for call mode.
+
+            <mode>:   call mode.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCMOD ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_CMOD_MOD* mode )
+{
+  TRACE_FUNCTION ("qAT_PlusCMOD()");
+
+  /* check command source */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+
+  /* fill in parameters */
+  *mode = ccShrdPrm.CMODmode;
+
+  return( AT_CMPL );
+}
+
+#ifdef FAX_AND_DATA
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_PlusCBST             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CBST? AT command
+            which returns the current setting for bearer service type.
+
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCBST ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_BS_SPEED* speed,
+                                   T_ACI_CBST_NAM* name,
+                                   T_ACI_CBST_CE* ce)
+{
+  TRACE_FUNCTION ("qAT_PlusCBST()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * fill in parameters
+ *-------------------------------------------------------------------
+ */
+  *speed = ccShrdPrm.CBSTspeed;
+  *name  = ccShrdPrm.CBSTname;
+  *ce    = ccShrdPrm.CBSTce;
+
+  return( AT_CMPL );
+}
+#endif /* FAX_AND_DATA */
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_PlusCCUG             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CCUG AT command
+            which is responsible to query the parameters for closed user
+            group supplementary services.
+
+            <mode>   : CUG mode.
+            <index>  : CUG index.
+            <info>   : CUG info.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCCUG  ( T_ACI_CMD_SRC   srcId,
+                                    T_ACI_CCUG_MOD  *mode,
+                                    T_ACI_CCUG_IDX  *index,
+                                    T_ACI_CCUG_INFO *info)
+{
+  T_CC_CMD_PRM * pCCCmdPrm; /* points to SS command parameters */
+
+  TRACE_FUNCTION ("qAT_PlusCCUG()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  pCCCmdPrm = &cmhPrm[srcId].ccCmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * fill in parameters
+ *-------------------------------------------------------------------
+ */
+  *mode  = pCCCmdPrm -> CCUGmode;
+  *index = pCCCmdPrm -> CCUGidx;
+  *info  = pCCCmdPrm -> CCUGinfo;
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_PlusCLCC             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CLCC? AT command
+            which returns the current call status.
+
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCLCC  ( T_ACI_CMD_SRC       srcId,
+                                    T_ACI_CLCC_CALDESC *calLst)
+{
+  /* Implements Measure 47 and 216 */
+  return ( qAT_plus_percent_CLCC(srcId, calLst, AT_CMD_CLCC, rdlPrm.rdlcId) );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                                        |
+| STATE   : code                  ROUTINE : qAT_PercentCLCC                                     |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %CLCC? AT command
+            which returns the current call status.
+
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentCLCC  ( T_ACI_CMD_SRC       srcId,
+                                    T_ACI_CLCC_CALDESC *calLst)
+{
+  /* Implements Measure 47 and 216 */
+  return ( qAT_plus_percent_CLCC(srcId, calLst, AT_CMD_P_CLCC, NO_ENTRY) );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_PlusCEER             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CEER AT command
+            which returns an extended error report.
+
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCEER  ( T_ACI_CMD_SRC    srcId,
+                                    USHORT          *cause)
+{
+  T_CC_CALL_TBL *ctbFail = ccShrdPrm.ctb[ccShrdPrm.cIdFail];
+
+  TRACE_FUNCTION ("qAT_PlusCEER()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * get error report
+ *-------------------------------------------------------------------
+ */
+
+  /* Extended error report to indicate attach related problems */
+  if ((causeCeer NEQ CEER_NotPresent) AND (causeMod EQ P_CEER_mm))
+  {
+    *cause = CAUSE_MAKE(DEFBY_CONDAT, ORIGSIDE_NET, MM_ORIGINATING_ENTITY, causeCeer);
+    return( AT_CMPL );
+  }
+  if ((causeCeer NEQ CEER_NotPresent) AND (causeMod EQ P_CEER_ss))
+  {
+    *cause = CAUSE_MAKE(DEFBY_CONDAT, ORIGSIDE_NET, SS_ORIGINATING_ENTITY, causeCeer);
+    return( AT_CMPL );
+  }
+  if ((causeCeer EQ P_CEER_ACMMaxReachedOrExceeded) AND (causeMod EQ P_CEER_sim)) /* ACI cause check */
+  {
+    *cause = CAUSE_MAKE(DEFBY_CONDAT, ORIGSIDE_MS, MNCC_ACI_ORIGINATING_ENTITY, P_CEER_ACMMaxReachedOrExceeded);
+    return( AT_CMPL );
+  }
+
+  if ((causeCeer EQ P_CEER_InvalidFDN) AND (causeMod EQ P_CEER_sim)) /* ACI cause check */
+  {
+    *cause = CAUSE_MAKE(DEFBY_CONDAT, ORIGSIDE_MS, MNCC_ACI_ORIGINATING_ENTITY, P_CEER_InvalidFDN );
+    return( AT_CMPL );
+  }
+
+  if( ccShrdPrm.cIdFail < 0 OR ccShrdPrm.cIdFail > MAX_CALL_NR ) 
+  {
+    *cause = CAUSE_MAKE(DEFBY_STD, ORIGSIDE_MS, MNCC_ACI_ORIGINATING_ENTITY, NOT_PRESENT_8BIT);
+    return( AT_CMPL );
+  }
+
+  /*
+   * This code has to become better understood, probably it can be simplified
+   * Be sure to use ctbFail here because TI compiler 1.22e may have a problem
+   * otherwise.
+   */
+  if (ctbFail NEQ NULL)
+  {
+    /* Call table entry still existant */
+    if (GET_CAUSE_VALUE(ctbFail->rejCs) NEQ NOT_PRESENT_8BIT)
+    {
+      *cause = ctbFail->rejCs;
+    }
+    else if (GET_CAUSE_VALUE(ctbFail->nrmCs) NEQ NOT_PRESENT_8BIT)
+    {
+      *cause = ctbFail->nrmCs;
+    }
+    else if (GET_CAUSE_VALUE(ctbFail->rslt) NEQ NOT_PRESENT_8BIT)
+    {
+      *cause = ctbFail->rslt;
+    }
+    else
+    {
+      /* in case network has sent no extended report */
+      *cause = CAUSE_MAKE(DEFBY_STD, ORIGSIDE_MS, MNCC_ACI_ORIGINATING_ENTITY, NOT_PRESENT_8BIT);
+    }
+  }
+  else
+  {
+    /* Call table entry already freed */
+    *cause = ccShrdPrm.ccCs[ccShrdPrm.cIdFail];
+  }
+  return AT_CMPL;
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCS                  |
+| STATE   : code                  ROUTINE : sAT_PlusPAS              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CPAS AT command
+            which returns the phone activity status.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCPAS  ( T_ACI_CMD_SRC    srcId,
+                                    T_ACI_CPAS_PAS  *pas)
+{
+  SHORT cId;            /* holds call id */
+  T_ACI_CFUN_FUN cfun_stat;
+
+  TRACE_FUNCTION ("qAT_PlusCPAS()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * get phone activity status
+ *-------------------------------------------------------------------
+ */
+
+  /* check if power is off (+CFUN=0) */
+  if ( qAT_PlusCFUN(srcId, &cfun_stat) EQ AT_FAIL )
+  {
+    return( AT_FAIL );
+  }
+
+  if ( cfun_stat EQ CFUN_FUN_Minimum )
+  {
+    *pas = CPAS_PAS_Asleep;
+    return( AT_CMPL );
+  }
+
+  /* search for active call */
+  cId = psaCC_ctbFindCall( OWN_SRC_INV, CS_ACT, NO_VLD_CT );
+
+  if( cId NEQ NO_ENTRY )
+  {
+    *pas = CPAS_PAS_CallProg;
+    return( AT_CMPL );
+  }
+
+  /* search for call on hold */
+  cId = psaCC_ctbFindCall( OWN_SRC_INV, CS_HLD, NO_VLD_CT );
+
+  if( cId NEQ NO_ENTRY )
+  {
+    *pas = CPAS_PAS_CallProg;
+    return( AT_CMPL );
+  }
+
+  /* search for an incoming call */
+  cId = psaCC_ctbFindCall( (T_OWN)CMD_SRC_NONE, CS_ACT_REQ, CT_MTC );
+
+  if( cId NEQ NO_ENTRY )
+  {
+    *pas = CPAS_PAS_Ring;
+    return( AT_CMPL );
+  }
+
+  /* ready to accept commands */
+    *pas = CPAS_PAS_Ready;
+    return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCS                  |
+| STATE   : code                  ROUTINE : sAT_PlusCSNS             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CSNS AT command
+            which returns the single numbering scheme mode.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PlusCSNS  ( T_ACI_CMD_SRC    srcId,
+                                    T_ACI_CSNS_MOD  *mode)
+{
+
+  TRACE_FUNCTION ("qAT_PlusCSNS()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * get SNS mode
+ *-------------------------------------------------------------------
+ */
+  *mode = (T_ACI_CSNS_MOD)ccShrdPrm.snsMode;
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_PercentCAL           |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %CAL? AT command
+            which returns the current call status.
+            03.06.03 SKA: This function is called by MFW only. It uses
+            this function to get the called number for emitting on display.
+            But there is a protocoll between ACI and MFW which says, that
+            the RAT_COLP signal sent by ACI to MFW at receiving of MNCC_SETUP_CNF
+            to tell MFW/BMI whether it can emit the called number caused by the
+            content of mncc_setup_cnf->connected_number.present sent by the network or not. 
+            If present = PRES_PRES_REST, ACI does not send RAT_COLP to MFW, but in this
+            function ACI did copy the number to the MFW callTable structure! 
+            Now, ACI does not copy the called number in case of PRES_PRES_REST and
+            MFW/BMI will emit an empty string on display. Therefore we could save
+            a lot of memory and internal traffic between ACI and MFW, if we keep
+            all the logic within ACI!
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentCAL( T_ACI_CMD_SRC    srcId,
+                                    T_ACI_CAL_ENTR*  callTable )
+{
+  SHORT ctbIdx;               /* holds call table index */
+  SHORT lstIdx;               /* holds call list index */
+
+  TRACE_FUNCTION ("qAT_PercentCAL()");
+
+/*
+ *-------------------------------------------------------------------
+ * for every call of the call table
+ *-------------------------------------------------------------------
+ */
+  for( ctbIdx = 0, lstIdx = 0; ctbIdx < MAX_CALL_NR; ctbIdx++ )
+  {
+    if (ccShrdPrm.ctb[ctbIdx] NEQ NULL)
+    {
+
+    /*
+     *---------------------------------------------------------------
+     * fill in call type
+     *---------------------------------------------------------------
+     */
+      switch( psaCC_ctb(ctbIdx)->calType )
+      {
+        case( CT_MOC ):
+        case( CT_MOC_RDL ):
+        case( CT_NI_MOC ):
+          callTable[lstIdx].calType = CAL_TYPE_MOC;
+          break;
+
+        case( CT_MTC ):
+          callTable[lstIdx].calType = CAL_TYPE_MTC;
+          break;
+
+        default:
+          callTable[lstIdx].calType = CAL_TYPE_NotPresent;
+      }
+
+     /*
+     *---------------------------------------------------------------
+     * fill in call status
+     *---------------------------------------------------------------
+     */
+      switch( psaCC_ctb(ctbIdx)->calStat )
+      {
+        case( CS_ACT_REQ ):
+          switch( psaCC_ctb(ctbIdx)->calType )
+          {
+            case( CT_MOC ):
+            case( CT_MOC_RDL ):
+            case( CT_NI_MOC ):
+              if( psaCC_ctb(ctbIdx)->alrtStat EQ AS_SND )
+              {
+                callTable[lstIdx].status = CAL_STAT_Alerting;
+              }
+              else
+              {
+                callTable[lstIdx].status = CAL_STAT_Dial;
+              }
+              break;
+
+            case( CT_MTC ):
+              if( psaCC_ctbFindCall ( (T_OWN)CMD_SRC_NONE, CS_ACT_REQ, NO_VLD_CT )
+                  NEQ -1 )
+              {
+                callTable[lstIdx].status = CAL_STAT_Wait;
+              }
+              else
+              {
+                callTable[lstIdx].status = CAL_STAT_Incomming;
+              }
+              break;
+
+            default:
+              callTable[lstIdx].status = CAL_STAT_NotPresent;
+
+          }
+          break;
+
+        case( CS_ACT ):
+        case( CS_MDF_REQ ):
+        case( CS_HLD_REQ ):
+          callTable[lstIdx].status = CAL_STAT_Active;
+          break;
+
+        case( CS_HLD ):
+          callTable[lstIdx].status = CAL_STAT_Held;
+          break;
+
+        case( CS_IDL ):
+        case( CS_DSC_REQ ):
+          callTable[lstIdx].status    = CAL_STAT_DeactiveReq;
+
+          /*
+           *  reset of all other values
+           */
+          callTable[lstIdx].mpty      = CAL_MPTY_NotPresent;
+          callTable[lstIdx].type.ton  = TON_NotPresent;
+          callTable[lstIdx].type.npi  = NPI_NotPresent;
+          callTable[lstIdx].number[0] = '\0';
+#ifdef NO_ASCIIZ
+          callTable[lstIdx].alpha.cs  = CS_NotPresent;
+          callTable[lstIdx].alpha.len = 0;
+#else  /* #ifdef NO_ASCIIZ */
+          callTable[lstIdx].alpha[0]  = '\0';
+#endif /* #ifdef NO_ASCIIZ */
+          callTable[lstIdx].calType   = CAL_TYPE_NotPresent;
+          callTable[lstIdx].calMode   = CAL_MODE_NotPresent;
+          callTable[lstIdx].calOwner  = CAL_OWN_NotPresent;
+
+
+          /*
+           *  indes and next entry, because of the continue statement
+           */
+          callTable[lstIdx].index     = ctbIdx+1;
+          lstIdx++;
+          continue;
+
+        case( CS_CPL_REQ ):
+          continue;
+      }
+
+    /*
+     *---------------------------------------------------------------
+     * fill in number of connected party
+     *---------------------------------------------------------------
+     */
+      switch( psaCC_ctb(ctbIdx)->calType )
+      {
+        
+        case( CT_MOC ):
+        case( CT_MOC_RDL ):
+        case( CT_NI_MOC ):
+          /* presentation restricted FTA 31.1.4.2 procedure 1 */
+          /* number not available due to interworking FTA 31.1.4.2 procedure 2 */
+          if ((psaCC_ctb(ctbIdx)->clgPty.present NEQ MNCC_PRES_NOT_PRES)  /* any .present indicator received from MSC? */
+          AND (psaCC_ctb(ctbIdx)->clgPty.c_num EQ 0) )               /* but no number available? */
+          {
+            /*
+             * this prevents MFW/BMI to emit the called number, but it
+             * ignores the NOT received COLP signal. Without a COLP signal
+             * MFW/BMI should not emit the called number. (FTA 31.1.4.2)
+             */
+            callTable[lstIdx].number[0] = '\0';
+            callTable[lstIdx].type.ton = TON_NotPresent;
+            callTable[lstIdx].type.npi = NPI_NotPresent;
+          }
+          else
+          {
+            psaCC_ctbCldAdr2Num (ctbIdx, callTable[lstIdx].number,
+                                 MAX_CC_ORIG_NUM_LEN);
+            callTable[lstIdx].type.ton = (T_ACI_TOA_TON)psaCC_ctb(ctbIdx)->cldPty.ton;
+            callTable[lstIdx].type.npi = (T_ACI_TOA_NPI)psaCC_ctb(ctbIdx)->cldPty.npi;
+          }
+          break;
+
+        case( CT_MTC ):
+          psaCC_ctbClrAdr2Num (ctbIdx, callTable[lstIdx].number,
+                               MAX_CC_ORIG_NUM_LEN);
+          callTable[lstIdx].type.ton = (T_ACI_TOA_TON)psaCC_ctb(ctbIdx)->clgPty.ton;
+          callTable[lstIdx].type.npi = (T_ACI_TOA_NPI)psaCC_ctb(ctbIdx)->clgPty.npi;
+          break;
+
+        case( NO_VLD_CT ):
+        default:
+          callTable[lstIdx].number[0] = '\0';
+          callTable[lstIdx].type.ton = TON_NotPresent;
+          callTable[lstIdx].type.npi = NPI_NotPresent;
+          break;
+      }
+
+#ifdef NO_ASCIIZ
+      memcpy( ( UBYTE* ) &callTable[lstIdx].alpha,
+              ( UBYTE* ) &psaCC_ctb(ctbIdx)->alphIdUni,
+              sizeof( T_ACI_PB_TEXT ) );
+#else  /* NO_ASCIIZ */
+      memcpy( callTable[lstIdx].alpha,
+              psaCC_ctb(ctbIdx)->alphIdUni.data,
+              psaCC_ctb(ctbIdx)->alphIdUni.len );
+
+      cmh_cvtFromDefGsm ( ( CHAR* ) psaCC_ctb(ctbIdx)->alphIdUni.data,
+                          ( USHORT ) psaCC_ctb(ctbIdx)->alphIdUni.len,
+                          callTable[lstIdx].alpha );
+#endif /* NO_ASCIIZ */
+
+    /*
+     *---------------------------------------------------------------
+     * fill in in-band tones setting
+     *---------------------------------------------------------------
+     */
+      switch( psaCC_ctb(ctbIdx)->inBndTns )
+      {
+        case( TRUE ):
+          callTable[lstIdx].ibtUse = CAL_IBT_TRUE;
+          break;
+
+        case( FALSE ):
+          callTable[lstIdx].ibtUse = CAL_IBT_FALSE;
+          break;
+      }
+
+  
+    /*
+     *---------------------------------------------------------------
+     * fill in call mode
+     *---------------------------------------------------------------
+     */
+      switch( cmhCC_getcalltype(ctbIdx) )
+      {                  
+        case( VOICE_CALL ):
+          switch( psaCC_ctb(ctbIdx)->BC
+                  [(psaCC_ctb(ctbIdx)->curBC EQ 0)?1:0].
+                  bearer_serv)
+          {
+            case( MNCC_BEARER_SERV_ASYNC ):
+              if( psaCC_ctb(ctbIdx)->rptInd EQ MNCC_RI_CIRCULAR )
+                callTable[lstIdx].calMode = CAL_MODE_VAD_Voice;
+              else
+                callTable[lstIdx].calMode = CAL_MODE_VFD_Voice;
+              break;
+
+            case( MNCC_BEARER_SERV_FAX ):
+              callTable[lstIdx].calMode = CAL_MODE_VAF_Voice;
+              break;
+
+            case( MNCC_BEARER_SERV_NOT_PRES ):
+              callTable[lstIdx].calMode = CAL_MODE_Voice;
+              break;
+
+            default:
+              callTable[lstIdx].calMode = CAL_MODE_Unknown;
+          }
+          break;
+
+#ifdef FAX_AND_DATA
+        case( TRANS_CALL ):
+        case( NON_TRANS_CALL ):
+          switch( psaCC_ctb(ctbIdx)->BC
+                  [(psaCC_ctb(ctbIdx)->curBC EQ 0)?1:0].
+                  bearer_serv)
+          {
+            case( MNCC_BEARER_SERV_SPEECH ):
+              if( psaCC_ctb(ctbIdx)->rptInd EQ MNCC_RI_CIRCULAR )
+                callTable[lstIdx].calMode = CAL_MODE_VAD_Data;
+              else
+                callTable[lstIdx].calMode = CAL_MODE_VFD_Data;
+              break;
+
+            case( MNCC_BEARER_SERV_NOT_PRES ):
+              callTable[lstIdx].calMode = CAL_MODE_Data;
+              break;
+
+            default:
+              callTable[lstIdx].calMode = CAL_MODE_Unknown;
+          }
+          break;
+
+        case( FAX_CALL ):
+          switch( psaCC_ctb(ctbIdx)->BC
+                  [(psaCC_ctb(ctbIdx)->curBC EQ 0)?1:0].
+                  bearer_serv)
+          {
+            case( MNCC_BEARER_SERV_SPEECH ):
+              callTable[lstIdx].calMode = CAL_MODE_VAF_Fax;
+              break;
+
+            case( MNCC_BEARER_SERV_NOT_PRES ):
+              callTable[lstIdx].calMode = CAL_MODE_Fax;
+              break;
+
+            default:
+              callTable[lstIdx].calMode = CAL_MODE_Unknown;
+          }
+          break;
+#endif /* #ifdef FAX_AND_DATA */
+
+#if defined CO_UDP_IP || defined(FF_GPF_TCPIP)
+
+/* SPR#1983 - SH - Identify WAP call */
+#ifdef CO_UDP_IP
+
+        case( UDPIP_CALL ):
+         /*fallthrough if both defined*/
+#endif
+#if defined(FF_GPF_TCPIP)
+        case (TCPIP_CALL):
+#endif /* FF_GPF_TCPIP */
+          switch( psaCC_ctb(ctbIdx)->BC
+                  [(psaCC_ctb(ctbIdx)->curBC EQ 0)?1:0].
+                  bearer_serv)
+          {
+            case( MNCC_BEARER_SERV_SPEECH ):
+              if( psaCC_ctb(ctbIdx)->rptInd EQ MNCC_RI_CIRCULAR )
+                callTable[lstIdx].calMode = CAL_MODE_VAD_Data;
+              else
+                callTable[lstIdx].calMode = CAL_MODE_VFD_Data;
+              break;
+
+            case( MNCC_BEARER_SERV_NOT_PRES ):
+              callTable[lstIdx].calMode = CAL_MODE_Data;
+              break;
+
+            default:
+              callTable[lstIdx].calMode = CAL_MODE_Unknown;
+              break;
+          }
+          break;
+#endif /* (CO_UDP_IP) || defined(FF_GPF_TCPIP) */
+        default:
+          callTable[lstIdx].calMode = CAL_MODE_Unknown;
+      }
+    /*
+     *---------------------------------------------------------------
+     * fill in call owner
+     *---------------------------------------------------------------
+     */
+      switch( (T_ACI_CMD_SRC)psaCC_ctb(ctbIdx)->calOwn )
+      {
+        case( CMD_SRC_LCL ):
+          callTable[lstIdx].calOwner = CAL_OWN_LCL;
+          break;
+#ifdef FF_ATI
+        case(CMD_SRC_ATI_1):
+        case(CMD_SRC_ATI_2):
+        case(CMD_SRC_ATI_3):
+        case(CMD_SRC_ATI_4):
+          callTable[lstIdx].calOwner = CAL_OWN_RMT;
+          break;
+#endif /* FF_ATI */
+        default:
+          callTable[lstIdx].calOwner = CAL_OWN_NONE;
+      }
+
+    /*
+     *---------------------------------------------------------------
+     * fill in multiparty status
+     *---------------------------------------------------------------
+     */
+      callTable[lstIdx].mpty = (psaCC_ctb(ctbIdx)->mptyStat EQ CS_ACT)?
+                                  CAL_MPTY_IsMember : CAL_MPTY_NoMember;
+    /*
+     *---------------------------------------------------------------
+     * fill in call index
+     *---------------------------------------------------------------
+     */
+      callTable[lstIdx].index = ctbIdx+1;
+      lstIdx++;
+    }
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * terminate list of calls
+ *-------------------------------------------------------------------
+ */
+  if( lstIdx < ctbIdx )
+  {
+    callTable[lstIdx].index = -1;
+  }
+
+  return( AT_CMPL );
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_CallActive           |
++--------------------------------------------------------------------+
+
+  PURPOSE : The function checks whether at least one call is in an
+            active state. This is not an official AT command !
+*/
+
+GLOBAL UBYTE qAT_CallActive ( void )
+{
+  SHORT ctbIdx;               /* holds call table index */
+
+  TRACE_FUNCTION ("qAT_CallActive()");
+
+  /*
+   *-------------------------------------------------------------------
+   * for every call of the call table
+   *-------------------------------------------------------------------
+   */
+  for( ctbIdx = 0; ctbIdx < MAX_CALL_NR; ctbIdx++ )
+  {
+    if (ccShrdPrm.ctb[ctbIdx] NEQ NULL)
+    {
+      /*
+       *---------------------------------------------------------------
+       * check call status
+       *---------------------------------------------------------------
+       */
+      switch( psaCC_ctb(ctbIdx)->calStat )
+      {
+        case CS_ACT:
+        case CS_HLD_REQ:
+        case CS_HLD:
+        case CS_MDF_REQ:
+          return TRUE;
+        default:
+          break;
+      }
+    }
+    
+  }
+  return FALSE;
+}
+
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : PSA_CCF                 |
+|                                 ROUTINE : qAT_PercentALS          |
++-------------------------------------------------------------------+
+
+  PURPOSE : get the ALS mode for outgoing calls (voice)
+            0: indicates bearer capability => BEARER_SERV_SPEECH
+            1: indicates bearer capability => BEARER_SERV_AUX_SPEECH
+*/
+
+GLOBAL void cmhCC_get_active_als_mode( T_ACI_CMD_SRC srcId, T_ACI_ALS_MOD *mode )
+{
+  T_CC_CMD_PRM  *pCCCmdPrm;  /* points to CC command parameters */
+
+  pCCCmdPrm  = &cmhPrm[srcId].ccCmdPrm;
+  *mode = pCCCmdPrm->ALSmode;
+}
+
+GLOBAL T_ACI_RETURN qAT_PercentALS( T_ACI_CMD_SRC srcId, T_ACI_ALS_MOD *mode  )
+{
+  TRACE_FUNCTION("qAT_PercentALS()");
+
+  if( !cmh_IsVldCmdSrc( srcId ) )
+  {
+    return( AT_FAIL );
+  }
+
+  cmhCC_get_active_als_mode( srcId, mode );
+
+  return( AT_CMPL );
+}
+
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : PSA_CCF                 |
+|                                 ROUTINE : qAT_PercentCTTY         |
++-------------------------------------------------------------------+
+
+  PURPOSE : Query the state of the TTY Service
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentCTTY (T_ACI_CMD_SRC srcId,
+                                     T_ACI_CTTY_MOD *mode,
+                                     T_ACI_CTTY_REQ *req,
+                                     T_ACI_CTTY_STAT *stat,
+                                     T_ACI_CTTY_TRX *trx)
+{
+  SHORT ctNr;
+  BOOL fnd_act = FALSE;;
+
+  if( !cmh_IsVldCmdSrc( srcId ) )
+  {
+    return( AT_FAIL );
+  }
+  *mode = cmhPrm[srcId].ccCmdPrm.CTTYmode;
+#ifdef FF_TTY
+  if (ccShrdPrm.ctmReq EQ MNCC_CTM_DISABLED)
+  {
+    *req = CTTY_REQ_Off;
+  }
+  else switch (ccShrdPrm.ttyCmd)
+  {
+  case TTY_ALL:
+    *req = CTTY_REQ_On;
+    break;
+  case TTY_HCO:
+    *req = CTTY_REQ_HCO;
+    break;
+  case TTY_VCO:
+    *req = CTTY_REQ_VCO;
+    break;
+  default:
+    *req = CTTY_REQ_Off;
+    break;
+  }
+  for (ctNr = 0; !fnd_act AND ctNr < MAX_CALL_NR; ctNr++)
+  {
+    if (ccShrdPrm.ctb[ctNr] NEQ NULL)
+    {
+      switch (psaCC_ctb(ctNr)->calStat)
+      {
+      case CS_ACT_REQ:
+      case CS_ACT:
+      case CS_HLD_REQ:
+      case CS_HLD:
+      case CS_MDF_REQ:
+        *stat = (ccShrdPrm.ctmState EQ TTY_STATE_ACTIVE)?
+                CTTY_STAT_On: CTTY_STAT_Off;
+        if (*stat EQ CTTY_STAT_On)
+        {
+          *trx = cmhCC_getTTYtrx_state ((int)ccShrdPrm.ttyCmd);
+        }
+        else
+        {
+          *trx = CTTY_TRX_Unknown;
+        }
+        fnd_act = TRUE;
+        break;
+      default:
+        break;
+      }
+    }
+  }
+  if (!fnd_act)
+#else
+  *req = CTTY_REQ_Off;
+#endif  /* FF_TTY */
+  {
+    *stat = CTTY_STAT_Unknown;
+    *trx = CTTY_TRX_Unknown;
+  }
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)               MODULE  : CMH_CCQ            |
+| STATE   : code                        ROUTINE : qAT_PercentRDL     |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %RDL? AT command
+            which returns the current setting for redial mode.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentRDL ( T_ACI_CMD_SRC srcId,
+                                     T_ACI_CC_REDIAL_MODE* redial_mode,
+                                     T_ACI_CC_REDIAL_NOTIF* notification)
+{
+  TRACE_FUNCTION ("qAT_PercentRDL()");
+
+  /* check command source */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  /* fill in parameter */
+  switch(rdlPrm.rdlMod)
+  {
+    case AUTOM_REPEAT_OFF:
+    case AUTOM_REPEAT_ON:
+        *redial_mode = rdlPrm.rdlMod;
+        break;
+    default:
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+  switch(rdlPrm.rdlModN)
+  {
+    case NO_NOTIF_USER:
+    case NOTIF_USER:
+        *notification = rdlPrm.rdlModN;
+        return( AT_CMPL );
+    default:
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+}
+
+#ifdef TI_PS_FF_AT_P_CMD_RDLB
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)             MODULE  : CMH_CCQ              |
+| STATE   : code                      ROUTINE : qAT_PercentRDLB      |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %RDLB? AT command
+            which returns the current black list.
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentRDLB ( T_ACI_CMD_SRC srcId,
+                                      T_ACI_CC_REDIAL_BLACKL *blackl,
+                                      T_ACI_CC_REDIAL_NOTIF* notification)
+{
+  TRACE_FUNCTION ("qAT_PercentRDLB()");
+
+  /* check command source */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  if (rdlPrm.rdlMod EQ AUTOM_REPEAT_ON)
+  {
+    if((cc_blacklist_ptr NEQ NULL) AND (cc_blacklist_ptr->blCount NEQ 0))
+    {/* fill in parameter */
+      memcpy(blackl,cc_blacklist_ptr,sizeof(T_ACI_CC_REDIAL_BLACKL));
+    }
+    *notification = rdlPrm.rdlBlN;
+    return( AT_CMPL );
+  }
+  else
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+}
+#endif /* TI_PS_FF_AT_P_CMD_RDLB */
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_PercentCSSD          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the AT%CSSD command
+            which returns an extended error report.
+
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentCSSD  ( T_ACI_CMD_SRC    srcId,
+                                       UBYTE           *ss_diag)
+{
+  T_CC_CALL_TBL *ctbFail = ccShrdPrm.ctb[ccShrdPrm.cIdFail];
+
+  TRACE_FUNCTION ("qAT_PercentCSSD()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * get ss diagnostic
+ *-------------------------------------------------------------------
+ */
+
+ /* 
+  *  check whether this diagnostic is within the specified parameters 
+  *  cross-check also MNCC SAP: VAL_ss_diag 
+  *  (This implementation follows version V3.19.0 (2004-06))
+  */
+  if( (ctbFail->ssDiag >= MNCC_SS_DIAG_MOC_BAR_CUG) AND
+      (ctbFail->ssDiag <= MNCC_SS_DIAG_CCBS_NOT_POSSIBLE ))
+  {
+    *ss_diag = ctbFail->ssDiag;    
+    return( AT_CMPL );
+  }
+  /* not yet initialized or not defined, return no information available */
+  else 
+  {
+    /*reset ccShrdPrm.ctb[ccShrdPrm.cIdFail].ssDiag */ 
+    *ss_diag = ctbFail->ssDiag = MNCC_SS_DIAG_NOT_PROVIDED;    
+    return( AT_CMPL );
+  }
+}
+
+#ifdef TI_PS_FF_AT_P_CMD_CUSCFG
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_PercentCUSCFG          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the AT%CUSCFG query command
+            which returns the customization status of the facility requested.
+
+*/
+GLOBAL T_ACI_RETURN qAT_PercentCUSCFG  ( T_ACI_CMD_SRC    srcId,
+                                         T_ACI_CUSCFG_FAC facility,
+                                         T_ACI_CUSCFG_STAT *status)
+{
+  TRACE_FUNCTION ("qAT_PercentCUSCFG()");
+
+    /*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  switch(facility)
+  {
+  case CUSCFG_FAC_MO_SM_Control:
+    *status = (T_ACI_CUSCFG_STAT)cuscfgParams.MO_SM_Control_SIM;
+    break;
+
+  case CUSCFG_FAC_MO_Call_Control:
+    *status = (T_ACI_CUSCFG_STAT)cuscfgParams.MO_Call_Control_SIM;
+    break;
+
+  case CUSCFG_FAC_MO_SS_Control:
+    *status = (T_ACI_CUSCFG_STAT)cuscfgParams.MO_SS_Control_SIM;
+    break;
+
+  case CUSCFG_FAC_MO_USSD_Control:
+    *status = (T_ACI_CUSCFG_STAT)cuscfgParams.MO_USSD_Control_SIM;
+    break;
+
+  case CUSCFG_FAC_2_Digit_Call:
+    *status = (T_ACI_CUSCFG_STAT)cuscfgParams.Two_digit_MO_Call;
+    break;
+
+  case CUSCFG_FAC_Ext_USSD_Res:
+    *status = (T_ACI_CUSCFG_STAT)cuscfgParams.Ext_USSD_Response;
+    break;
+
+  case CUSCFG_FAC_T_MOBILE_Eons:
+    *status = (T_ACI_CUSCFG_STAT)cuscfgParams.T_MOBILE_Eons;
+    break;
+     
+  case CUSCFG_FAC_USSD_As_MO_Call:
+    *status = (T_ACI_CUSCFG_STAT)cuscfgParams.USSD_As_MO_Call;
+    break;
+
+
+  default:
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+  return(AT_CMPL);
+}
+#endif /* TI_PS_FF_AT_P_CMD_CUSCFG */
+
+#ifdef TI_PS_FF_AT_P_CMD_STDR
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_PercentSTDR          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the AT%STDR command
+            which returns the value of global variable <std>.
+
+*/
+
+GLOBAL T_ACI_RETURN qAT_PercentSTDR  ( T_ACI_CMD_SRC    srcId,
+                                       UBYTE           *rvstd)
+{
+  TRACE_FUNCTION ("qAT_PercentSTDR()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * Read <std>
+ *-------------------------------------------------------------------
+ */
+  *rvstd = std;
+
+  return( AT_CMPL );
+}
+#endif /* TI_PS_FF_AT_P_CMD_STDR */
+
+/* Implements Measure 47 and 216 */
+/*
++------------------------------------------------------------------------------
+|  Function    : qAT_plus_percent_CLCC
++------------------------------------------------------------------------------
+|  Purpose     : This is common functional counterpart to the %CLCC? and +CLCC?
+|
+|  Parameters  : srcId      - AT command source identifier
+|                calLst     - Points to CLCC current call 
+|                             list element.
+|                at_cmd_id  - AT Command Identifier 
+|                             ( AT_CMD_CLCC or AT_CMD_P_CLCC )
+|
+|                rdlcId     - Redial Call Identifier , NO_ENTRY if no redial
+|
+|  Return      : ACI functional return codes
++------------------------------------------------------------------------------
+*/
+
+LOCAL T_ACI_RETURN qAT_plus_percent_CLCC( T_ACI_CMD_SRC srcId,
+                                          T_ACI_CLCC_CALDESC *calLst,
+                                          T_ACI_AT_CMD at_cmd_id, 
+                                          SHORT rdlcId )
+{
+  SHORT ctbIdx;
+  SHORT lstIdx;
+  int index;
+
+  TRACE_FUNCTION ("qAT_plus_percent_CLCC()");
+
+  index =  ( at_cmd_id EQ AT_CMD_P_CLCC )?1:0;
+  /*
+   *-------------------------------------------------------------------
+   * for every call of the call table
+   *-------------------------------------------------------------------
+   */
+  for( ctbIdx = 0, lstIdx = 0; ctbIdx < MAX_CALL_NR; ctbIdx++ )
+  {
+    if ( (ccShrdPrm.ctb[ctbIdx] NEQ NULL) AND (rdlcId EQ NO_ENTRY) )
+    {
+      /*
+       *---------------------------------------------------------------
+       * fill in call type
+       *---------------------------------------------------------------
+       */
+      if ( ( psaCC_ctb(ctbIdx)->calType >= CT_MOC ) AND 
+           ( psaCC_ctb(ctbIdx)->calType <= CT_MOC_RDL ))
+      {
+        calLst[lstIdx].dir =
+            (T_ACI_CLCC_DIR) aci_clcc_dir[psaCC_ctb(ctbIdx)->calType][index];
+      }
+      
+
+      /*
+       *---------------------------------------------------------------
+       * fill in call status
+       *---------------------------------------------------------------
+       */
+      switch( psaCC_ctb(ctbIdx)->calStat )
+      {
+        case( CS_ACT_REQ ):
+          switch( psaCC_ctb(ctbIdx)->calType )
+          {
+            case( CT_MOC ):
+            case( CT_MOC_RDL ):
+              if( psaCC_ctb(ctbIdx)->alrtStat EQ AS_SND )
+              {
+                calLst[lstIdx].stat = CLCC_STAT_Alerting;
+              }
+              else
+              {
+                calLst[lstIdx].stat = CLCC_STAT_Dialing;
+              }
+              break;
+
+            case( CT_MTC ):
+              if (  psaCC_ctbCallInUse ( ) )
+              {
+                calLst[lstIdx].stat = CLCC_STAT_Waiting;
+              }
+              else
+              {
+                calLst[lstIdx].stat = CLCC_STAT_Incoming;
+              }
+              break;
+          }
+          break;
+
+        case( CS_ACT ):
+        case( CS_DSC_REQ ):
+        /* 
+         * Also show calls in disconnecting state since in 4.08/5.4.4.2.1.1 ii)
+         * the user is still connected to the network.
+         * This call is then either terminated from the network side.
+         * (after the operator announcement) or user initiated by ATH 
+         */
+        case( CS_MDF_REQ ):
+        case( CS_HLD_REQ ):
+          calLst[lstIdx].stat = CLCC_STAT_Active;
+          break;
+
+        case( CS_HLD ):
+          calLst[lstIdx].stat = CLCC_STAT_Held;
+          break;
+
+        case( CS_IDL ):
+        case( CS_CPL_REQ ):
+          continue;
+      }
+
+    /*
+     *---------------------------------------------------------------
+     * fill in number of connected party
+     *---------------------------------------------------------------
+     */
+      switch( psaCC_ctb(ctbIdx)->calType )
+      {
+        case( CT_MOC ):
+        case( CT_MOC_RDL ):
+          psaCC_ctbCldAdr2Num (ctbIdx, calLst[lstIdx].number,
+                               MAX_CC_ORIG_NUM_LEN);
+          calLst[lstIdx].type.ton = (T_ACI_TOA_TON)psaCC_ctb(ctbIdx)->cldPty.ton;
+          calLst[lstIdx].type.npi = (T_ACI_TOA_NPI)psaCC_ctb(ctbIdx)->cldPty.npi;
+          break;
+
+        case( CT_MTC ):
+          psaCC_ctbClrAdr2Num (ctbIdx, calLst[lstIdx].number,
+                               MAX_CC_ORIG_NUM_LEN);
+          calLst[lstIdx].type.ton = (T_ACI_TOA_TON)psaCC_ctb(ctbIdx)->clgPty.ton;
+          calLst[lstIdx].type.npi = (T_ACI_TOA_NPI)psaCC_ctb(ctbIdx)->clgPty.npi;
+          break;
+      }
+#ifdef NO_ASCIIZ
+      memcpy( ( UBYTE* ) &calLst[lstIdx].alpha,
+              ( UBYTE* ) &psaCC_ctb(ctbIdx)->alphIdUni,
+              sizeof( T_ACI_PB_TEXT ) );
+#else  /* NO_ASCIIZ */
+      memcpy( calLst[lstIdx].alpha,
+              ccShrdPrm.ctb[ctbIdx].alphIdUni.data,
+              ccShrdPrm.ctb[ctbIdx].alphIdUni.len );
+
+      cmh_cvtFromDefGsm ( ( CHAR* ) ccShrdPrm.ctb[ctbIdx].alphIdUni.data,
+                          ( USHORT ) ccShrdPrm.ctb[ctbIdx].alphIdUni.len,
+                          calLst[lstIdx].alpha );
+#endif /* NO_ASCIIZ */
+
+    /*
+     *---------------------------------------------------------------
+     * fill in call mode
+     *---------------------------------------------------------------
+     */
+      switch( cmhCC_getcalltype(ctbIdx) )
+      {
+        case( VOICE_CALL ):
+          switch( psaCC_ctb(ctbIdx)->BC
+                  [(psaCC_ctb(ctbIdx)->curBC EQ 0)?1:0].
+                  bearer_serv)
+          {
+            case( MNCC_BEARER_SERV_ASYNC ):
+              if( psaCC_ctb(ctbIdx)->rptInd EQ MNCC_RI_CIRCULAR )
+                calLst[lstIdx].mode = CLCC_MODE_Voice;
+              else
+                calLst[lstIdx].mode = CLCC_MODE_VFDVoice;
+              break;
+
+            case( MNCC_BEARER_SERV_FAX ):
+              calLst[lstIdx].mode = CLCC_MODE_VAFVoice;
+              break;
+
+            case( MNCC_BEARER_SERV_NOT_PRES ):
+              calLst[lstIdx].mode = CLCC_MODE_Voice;
+              break;
+
+            default:
+              calLst[lstIdx].mode = CLCC_MODE_Unknown;
+          }
+          break;
+
+#ifdef FAX_AND_DATA
+        case( TRANS_CALL ):
+        case( NON_TRANS_CALL ):
+          switch( psaCC_ctb(ctbIdx)->BC
+                  [(psaCC_ctb(ctbIdx)->curBC EQ 0)?1:0].
+                  bearer_serv)
+          {
+            case( MNCC_BEARER_SERV_SPEECH ):
+              if( psaCC_ctb(ctbIdx)->rptInd EQ MNCC_RI_CIRCULAR )
+                calLst[lstIdx].mode = CLCC_MODE_VADData;
+              else
+                calLst[lstIdx].mode = CLCC_MODE_VFDData;
+              break;
+
+            case( MNCC_BEARER_SERV_NOT_PRES ):
+              calLst[lstIdx].mode = CLCC_MODE_Data;
+              break;
+
+            default:
+              calLst[lstIdx].mode = CLCC_MODE_Unknown;
+          }
+          break;
+
+        case( FAX_CALL ):
+          switch( psaCC_ctb(ctbIdx)->BC
+                  [(psaCC_ctb(ctbIdx)->curBC EQ 0)?1:0].
+                  bearer_serv)
+          {
+            case( MNCC_BEARER_SERV_SPEECH ):
+              calLst[lstIdx].mode = CLCC_MODE_VAFFax;
+              break;
+
+            case( MNCC_BEARER_SERV_NOT_PRES ):
+              calLst[lstIdx].mode = CLCC_MODE_Fax;
+              break;
+
+            default:
+              calLst[lstIdx].mode = CLCC_MODE_Unknown;
+          }
+          break;
+#endif /* #ifdef FAX_AND_DATA */
+
+        default:
+          calLst[lstIdx].mode = CLCC_MODE_Unknown;
+      }
+
+      /*
+       *---------------------------------------------------------------
+       * fill in multiparty status
+       *---------------------------------------------------------------
+       */
+      calLst[lstIdx].mpty = (psaCC_ctb(ctbIdx)->mptyStat EQ CS_ACT)?
+                              CLCC_MPTY_IsMember : CLCC_MPTY_NoMember;
+     /*
+      *---------------------------------------------------------------
+      * fill in line1 or line2
+      *---------------------------------------------------------------
+      */
+     switch (cmhCC_GetCallType_from_bearer( &psaCC_ctb(ctbIdx)->BC[psaCC_ctb(ctbIdx)->curBC] ))
+     {
+        case ( CRING_SERV_TYP_Voice):
+           calLst[lstIdx].class_type = CLCC_CLASS_Line1;
+           break;
+
+        case ( CRING_SERV_TYP_AuxVoice):
+           calLst[lstIdx].class_type = CLCC_CLASS_Line2;
+           break;
+
+        default:
+           calLst[lstIdx].class_type = CLCC_CLASS_NotPresent;
+           break;
+      }
+      /*
+       *---------------------------------------------------------------
+       * fill in progress description if using BAT interface
+       *---------------------------------------------------------------
+       */
+#ifdef FF_BAT
+       if ( at_cmd_id EQ AT_CMD_P_CLCC )
+       {
+         calLst[lstIdx].prog_desc = psaCC_ctb(ctbIdx)->prgDesc;
+       }
+#endif
+
+      /*
+       *---------------------------------------------------------------
+       * fill in call index
+       *---------------------------------------------------------------
+       */
+      calLst[lstIdx].idx = ctbIdx+1;
+      lstIdx++;
+
+   }
+  }
+
+  /*
+   *-------------------------------------------------------------------
+   * terminate list of calls
+   *-------------------------------------------------------------------
+   */
+  if( lstIdx < ctbIdx )
+  {
+    calLst[lstIdx].idx       = ACI_NumParmNotPresent;
+    calLst[lstIdx].dir       = CLCC_DIR_NotPresent;
+    calLst[lstIdx].stat      = CLCC_STAT_NotPresent;
+    calLst[lstIdx].mode      = CLCC_MODE_NotPresent;
+    calLst[lstIdx].mpty      = CLCC_MPTY_NotPresent;
+    calLst[lstIdx].type.ton  = TON_NotPresent;
+    calLst[lstIdx].number[0] = 0x0;
+    if( at_cmd_id EQ AT_CMD_P_CLCC )
+    {
+      calLst[lstIdx].class_type = CLCC_CLASS_NotPresent;
+#ifdef FF_BAT
+      calLst[lstIdx].prog_desc = NOT_PRESENT_8BIT;
+#endif
+    }
+#ifdef NO_ASCIIZ
+    calLst[lstIdx].alpha.cs  = CS_NotPresent;
+    calLst[lstIdx].alpha.len = 0;
+#else  /* #ifdef NO_ASCIIZ */
+    calLst[lstIdx].alpha[0]  = 0x0;
+#endif /* #ifdef NO_ASCIIZ */
+  }
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_CCQ                  |
+| STATE   : code                  ROUTINE : qAT_PlusCVHU             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is query call for +CVHU for the control of the voice 
+            hangup
+  
+*/
+GLOBAL T_ACI_RETURN qAT_PlusCVHU ( T_ACI_CMD_SRC srcId, T_ACI_CVHU_MODE *mode)
+{
+  TRACE_FUNCTION("qAT_PlusCVHU()");
+
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+  
+  *mode = ccShrdPrm.cvhu;
+
+  return( AT_CMPL );
+}
+/*==== EOF ========================================================*/