diff src/g23m-aci/uart/uart_txp.c @ 162:53929b40109c

src/g23m-aci: initial import from TCS3.2/LoCosto
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 11 Oct 2016 02:02:43 +0000
parents
children
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/g23m-aci/uart/uart_txp.c	Tue Oct 11 02:02:43 2016 +0000
@@ -0,0 +1,382 @@
+/* 
++----------------------------------------------------------------------------- 
+|  Project :  
+|  Modul   :  
++----------------------------------------------------------------------------- 
+|  Copyright 2002 Texas Instruments Berlin, AG 
+|                 All rights reserved. 
+| 
+|                 This file is confidential and a trade secret of Texas 
+|                 Instruments Berlin, AG 
+|                 The receipt of or possession of this file does not convey 
+|                 any rights to reproduce or disclose its contents or to 
+|                 manufacture, use, or sell anything it may describe, in 
+|                 whole, or in part, without the specific written consent of 
+|                 Texas Instruments Berlin, AG. 
++----------------------------------------------------------------------------- 
+|  Purpose :  This modul is part of the entity UART and implements all 
+|             functions to handles the incoming primitives as described in 
+|             the SDL-documentation (TX-statemachine)
++----------------------------------------------------------------------------- 
+*/ 
+
+#ifndef UART_TXP_C
+#define UART_TXP_C
+#endif /* !UART_TXP_C */
+
+#define ENTITY_UART
+
+#ifndef FF_MULTI_PORT
+/*==== INCLUDES =============================================================*/
+
+#ifdef WIN32
+#include "nucleus.h"
+#endif /* WIN32 */
+#include "typedefs.h"   /* to get Condat data types */
+#include "vsi.h"        /* to get a lot of macros */
+#include "macdef.h"     /* to get a lot of macros */
+#include "custom.h"
+#include "gsm.h"        /* to get a lot of macros */
+#include "cnf_uart.h"   /* to get cnf-definitions */
+#include "mon_uart.h"   /* to get mon-definitions */
+#include "prim.h"       /* to get the definitions of used SAP and directions */
+#ifdef DTILIB
+#include "dti.h"        /* to get dti lib */
+#endif /* DTILIB */
+#include "pei.h"        /* to get PEI interface */
+#ifdef _TARGET_
+#include "uart/serialswitch.h"
+#include "uart/traceswitch.h"
+#else /* _TARGET_ */
+#include "serial_dat.h" /* to get definitions of serial driver */
+#endif /* _TARGET_ */
+#include "uart.h"       /* to get the global entity definitions */
+
+#include "uart_txf.h"   /* to get tx functions */
+
+#include "uart_kers.h"   /* to get ker signals */
+#include "uart_drxs.h"   /* to get drx signals */
+
+#ifdef _SIMULATION_
+#include <stdio.h>      /* to get sprintf */
+#include "uart_txp.h"   /* to get tx_writedata */
+#endif /* _SIMULATION_ */
+/*==== CONST ================================================================*/
+
+/*==== LOCAL VARS ===========================================================*/
+
+/*==== PRIVATE FUNCTIONS ====================================================*/
+
+/*==== PUBLIC FUNCTIONS =====================================================*/
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : tx_uart_driver_sent_ind
++------------------------------------------------------------------------------
+| Description : Handles the primitive UART_DRIVER_SENT_IND
+|
+| Parameters  : *uart_device - affected device database
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void tx_uart_driver_sent_ind ( T_UART_DATA* uart_device )
+{
+  T_desc2* temp_desc;
+  T_DLC*  dlc;
+
+  TRACE_EVENT( "tx_uart_driver_sent_ind()" );
+
+  /*
+   * set affected instance
+   */
+  uart_data = uart_device;
+
+  switch( GET_STATE( UART_SERVICE_TX ) )
+  {
+    case TX_READY:
+      /*
+       * send DATA_SENT signal
+       */
+      dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE];
+      uart_data->tx.dlc_instance = UART_EMPTY_INSTANCE;
+      temp_desc                  = dlc->transmit_data;
+      dlc->transmit_data         = NULL;
+      uart_data->drx             = dlc->drx;
+      sig_tx_drx_data_sent_req(temp_desc, dlc->transmit_pos);
+      /*
+       * determine whether there is still data to send
+       */
+      if(dlc->transmit_data EQ NULL)
+      {
+        /*
+         * no more data
+         */
+        uart_data->tx.send_state = UART_TX_NOT_SENDING;
+        break;
+      }
+      /*
+       * inform dlc about sending
+       */
+      uart_data->drx = dlc->drx;
+      sig_tx_drx_sending_req();
+      /*
+       * transmit data
+       */
+      if(uart_data EQ (&(uart_data_base[0])))
+      {
+        TRACE_EVENT("UF_WriteData()");
+#ifdef _SIMULATION_
+        tx_writedata(0);
+#else /* _SIMULATION_ */
+        UF_WriteData (uart_data->device, sm_suspend, tx_writeInFunc_0);
+#endif /* else _SIMULATION_ */
+      }
+#ifdef FF_TWO_UART_PORTS
+      else if(uart_data EQ (&(uart_data_base[1])))
+      {
+        TRACE_EVENT("UF_WriteData()");
+#ifdef _SIMULATION_
+        tx_writedata(1);
+#else /* _SIMULATION_ */
+        UF_WriteData (uart_data->device, sm_suspend, tx_writeInFunc_1);
+#endif /* else _SIMULATION_ */
+      }
+#endif /* FF_TWO_UART_PORTS */
+      else
+      {
+        TRACE_ERROR("wrong value of uart_data");
+      }
+      break;
+
+    case TX_MUX:
+      /*
+       * send DATA_SENT signal
+       */
+      if(uart_data->tx.dlc_instance EQ UART_EMPTY_INSTANCE)
+      {
+        /*
+         * use entry 0 for raw data
+         */
+        dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE];
+      }
+      else
+      {
+        dlc = &uart_data->dlc_table[uart_data->tx.dlc_instance];
+      }
+      temp_desc          = dlc->transmit_data;
+      dlc->transmit_data = NULL;
+      if(uart_data->tx.dlc_instance EQ UART_CONTROL_INSTANCE)
+        sig_tx_ker_data_sent_ind(temp_desc, dlc->transmit_pos);
+      else
+      {
+        uart_data->drx = dlc->drx;
+        sig_tx_drx_data_sent_req(temp_desc, dlc->transmit_pos);
+      }
+      /*
+       * determine next dlc allow to send
+       */
+      tx_next_send_allowed();
+      if(uart_data->tx.dlc_instance EQ UART_EMPTY_INSTANCE)
+      {
+        /*
+         * queue empty
+         */
+        uart_data->tx.send_state = UART_TX_NOT_SENDING;
+        break;
+      }
+      /*
+       * inform dlc about sending
+       */
+      dlc = &uart_data->dlc_table[uart_data->tx.dlc_instance];
+      if(uart_data->tx.dlc_instance EQ UART_CONTROL_INSTANCE)
+      {
+        /*
+         * Control channel
+         */
+        sig_tx_ker_sending_ind();
+      }
+      else
+      {
+        /*
+         * Data channel
+         */
+        uart_data->drx = dlc->drx;
+        sig_tx_drx_sending_req();
+      }
+      /*
+       * transmit data
+       */
+#ifndef _SIMULATION_
+      tx_flushUart();
+#endif /* !_SIMULATION_ */
+      if(uart_data EQ (&(uart_data_base[0])))
+      {
+        TRACE_EVENT("UF_WriteData()");
+#ifdef _SIMULATION_
+        tx_writedata(0);
+#else /* _SIMULATION_ */
+        UF_WriteData (uart_data->device, sm_suspend, tx_writeInFunc_0);
+#endif /* else _SIMULATION_ */
+      }
+#ifdef FF_TWO_UART_PORTS
+      else if(uart_data EQ (&(uart_data_base[1])))
+      {
+        TRACE_EVENT("UF_WriteData()");
+#ifdef _SIMULATION_
+        tx_writedata(1);
+#else /* _SIMULATION_ */
+        UF_WriteData (uart_data->device, sm_suspend, tx_writeInFunc_1);
+#endif /* else _SIMULATION_ */
+      }
+#endif /* FF_TWO_UART_PORTS */
+      else
+      {
+        TRACE_ERROR("wrong value of uart_data");
+      }
+      break;
+
+    default:
+      TRACE_ERROR( "UART_DRIVER_SENT_IND unexpected" );
+      break;
+  }
+} /* tx_uart_driver_sent_ind() */
+
+
+
+#ifdef _SIMULATION_
+/*
++------------------------------------------------------------------------------
+| Function    : tx_dti_ready_ind
++------------------------------------------------------------------------------
+| Description : Handles the primitive DTI_READY_IND
+|
+| Parameters  : *dti_ready_ind - Ptr to primitive payload
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void tx_dti_ready_ind ( T_DTI2_READY_IND *dti_ready_ind )
+{
+  TRACE_FUNCTION( "tx_dti_ready_ind" );
+  
+  /*
+   * free the received primitive
+   */
+  PFREE(dti_ready_ind);
+#ifdef DTI2 /* should combine "caller" and "read_data" */
+            /* when using both devices in the test document?! */
+  tx_uart_driver_sent_ind(&(uart_data_base[UART_TEST_C_ID_1]));
+#else  /* DTI2 */
+  tx_uart_driver_sent_ind(&(uart_data_base[dti_ready_ind->c_id]));
+#endif /* DTI2 */
+} /* tx_dti_ready_ind() */
+
+
+
+/*
++------------------------------------------------------------------------------
+| Function    : tx_writedata
++------------------------------------------------------------------------------
+| Description : Simulates UF_WriteData call
+|
+| Parameters  : caller - calling UART instance
+|
++------------------------------------------------------------------------------
+*/
+GLOBAL void tx_writedata (UBYTE caller)
+{
+  char          buf[100];
+  T_reInstMode  reInstall;
+  USHORT        size[2];
+  USHORT        pos;
+  USHORT        i;
+  T_UART_DATA*  uart_device;
+
+  TRACE_FUNCTION( "tx_writedata" );
+
+  /*
+   * set UART instance
+   */
+  uart_device = &(uart_data_base[caller]);
+
+  {
+    /*
+     * calculation of SDU length: ((((frame-size + 3) * 2) + 2) * 8)
+     */
+    PALLOC_SDU (dti_data_test_req, DTI2_DATA_TEST_REQ, 1088);
+#ifdef DTI2 /* should switch for C_ID_1/2 when using both devices in the test document?! */
+    dti_data_test_req->link_id               = LINK_WRITEDATA_PORT_1; /* for write_data call */
+    dti_data_test_req->parameters.p_id       = 0;
+    dti_data_test_req->parameters.st_lines.st_flow    = 0;
+    dti_data_test_req->parameters.st_lines.st_line_sa = 0;
+    dti_data_test_req->parameters.st_lines.st_line_sb = 0;
+    dti_data_test_req->parameters.st_lines.st_break_len = 0;
+    dti_data_test_req->sdu.o_buf             = 0;
+#else  /* DTI2 */
+    dti_data_test_req->tui        = 3; /* for write_data call */
+    dti_data_test_req->c_id       = caller;
+    dti_data_test_req->p_id       = 0;
+    dti_data_test_req->op_ack     = 0;
+    dti_data_test_req->st_flow    = 0;
+    dti_data_test_req->st_line_sa = 0;
+    dti_data_test_req->st_line_sb = 0;
+    dti_data_test_req->st_escape  = 0;
+    dti_data_test_req->sdu.o_buf  = 0;
+#endif /* DTI2 */
+
+    uart_device->tx.dest[0] = dti_data_test_req->sdu.buf;
+    uart_device->tx.dest[1] = NULL;
+    size[0]                 = (USHORT)(1088 >> 3);
+    size[1]                 = 0;
+
+    /*
+     * call actual function
+     */
+    if(caller EQ 0)
+    {
+      tx_writeInFunc_0 (FALSE, &reInstall, 1, uart_device->tx.dest, size);
+    }
+#ifdef FF_TWO_UART_PORTS
+    else if(caller EQ 1)
+    {
+      tx_writeInFunc_1 (FALSE, &reInstall, 1, uart_device->tx.dest, size);
+    }
+#endif /* FF_TWO_UART_PORTS */
+    else
+    {
+      TRACE_ERROR("wrong caller value");
+    }
+
+    /*
+     * set length of sdu
+     */
+    dti_data_test_req->sdu.l_buf  = ((USHORT)(1088 >> 3) - size[0]) << 3;
+
+    /*
+     * trace output 
+     */
+    i   = 0;
+    pos = 0;
+    while(pos < (dti_data_test_req->sdu.l_buf >> 3))
+    {
+      i+= sprintf(&buf[i], "0x%02x, ", dti_data_test_req->sdu.buf[pos]);
+      pos++;
+      if(i > 80)
+      {
+        TRACE_FUNCTION( buf );
+        i = 0;
+      }
+      else if(pos >= (dti_data_test_req->sdu.l_buf >> 3))
+      {
+        TRACE_FUNCTION( buf );
+      }
+    }
+    /*
+     * send primitive
+     */
+    PSEND (hCommMMI, dti_data_test_req);
+  }
+} /* tx_writedata() */
+#endif /* _SIMULATION_ */
+#endif /* !FF_MULTI_PORT */