--- a/doc/Compiling	Thu Aug 03 04:59:47 2017 +0000
+++ b/doc/Compiling	Thu Aug 03 05:20:46 2017 +0000
@@ -64,7 +64,7 @@
 are supported:
 
 c139		Motorola C139
-fcdev3b		FreeCalypso FCDEV3B (hardware designed but not built yet)
+fcdev3b		FreeCalypso FCDEV3B
 gtamodem	The Calypso GSM/GPRS modem in Openmoko GTA01/02 smartphones
 pirelli		Pirelli DP-L10
 
@@ -86,9 +86,8 @@
 with fc-loadtool at address 0x10000 on the C139 and at address 0 on all other
 targets.
 
-When building firmware for the Pirelli or for future FreeCalypso hardware that
-will use the same high capacity flash+pSRAM chip, one can build either a
-flashable image or a RAM-loadable one - or both.  Because this part of the
+When building firmware for the FCDEV3B or for the Pirelli, one can build either
+a flashable image or a RAM-loadable one - or both.  Because this part of the
 build system is common with other targets for which only flash images can be
 produced, the Makefile always builds the flashable image by default -
 fwimage.bin is always meant for flash and never for RAM.  To build a RAM-
@@ -103,6 +102,6 @@
 (flash or run in RAM as appropriate), you will need to use FreeCalypso host
 tools.  As of this writing, the latest packaged release is this one:
 
-ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/fc-host-tools-r4.tar.bz2
+ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/fc-host-tools-r5.tar.bz2
 
 Please see target-specific notes for more details.