diff src/cs/system/main/init.c @ 519:838eeafb0051

Main and Audio source directories lowercased
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Jul 2018 07:41:05 +0000
parents src/cs/system/Main/init.c@706f4b71aceb
children 92dbfa906f66
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/cs/system/main/init.c	Sun Jul 22 07:41:05 2018 +0000
@@ -0,0 +1,931 @@
+/*
+ * INIT.C
+ *
+ * This module allows to initialize the board:
+ *     - wait states,
+ *     - unmask selected interrupts,
+ *     - initialize clock,
+ *     - disable watchdog.
+ * Dummy functions used by the EVA3 library are defined.
+ */
+
+/* Config Files */
+
+#ifndef _WINDOWS
+  #include "l1sw.cfg"
+  #include "rf.cfg"
+  #include "chipset.cfg"
+  #include "board.cfg"
+  #include "swconfig.cfg"
+  #include "fc-target.cfg"
+  #if (OP_L1_STANDALONE == 0)
+    #include "rv.cfg"
+    #include "sys.cfg"
+    #include "debug.cfg"
+    #ifdef BLUETOOTH_INCLUDED
+      #include "btemobile.cfg"
+    #endif
+    #ifdef BLUETOOTH
+      #include "bluetooth.cfg"
+    #endif
+  #endif
+
+  #if (OP_L1_STANDALONE == 0)
+    #include "rv/rv_defined_swe.h"
+  #endif
+#endif
+
+/* Include Files */
+#include <assert.h>
+#include <ctype.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "nucleus.h"
+
+#include "sys_types.h"
+#include "l1_types.h"
+#include "l1_confg.h"
+#include "l1_const.h"
+
+#if TESTMODE
+  #include "l1tm_defty.h"
+#endif // TESTMODE
+
+#if (AUDIO_TASK == 1)
+  #include "l1audio_const.h"
+  #include "l1audio_cust.h"
+  #include "l1audio_defty.h"
+#endif // AUDIO_TASK
+
+#if (L1_GTT == 1)
+  #include "l1gtt_const.h"
+  #include "l1gtt_defty.h"
+#endif
+
+#if (L1_MP3 == 1)
+  #include "l1mp3_defty.h"
+#endif
+
+#if (L1_MIDI == 1)
+  #include "l1midi_defty.h"
+#endif
+
+#if (L1_AAC == 1)
+  #include "l1aac_defty.h"
+#endif
+#if (L1_DYN_DSP_DWNLD == 1)
+  #include "l1_dyn_dwl_defty.h"
+#endif
+
+#if (TRACE_TYPE == 4)
+  #include "l1_defty.h"
+#endif
+
+
+#if ((OP_L1_STANDALONE == 1) && (CODE_VERSION != SIMULATION) && (PSP_STANDALONE == 0))
+
+  #if (AUDIO_TASK == 1)
+    #include "l1audio_signa.h"
+    #include "l1audio_msgty.h"
+  #endif // AUDIO_TASK
+
+  #if (L1_GTT == 1)
+    #include "l1gtt_signa.h"
+    #include "l1gtt_msgty.h"
+  #endif
+
+  #include "l1_defty.h"
+  #include "cust_os.h"
+  #include "l1_msgty.h"
+  #include "nu_main.h"
+  #include "l1_varex.h"
+  #include "l1_proto.h"
+  #include "hw_debug.h"
+  #include "l1_trace.h"
+
+#endif   /* ((OP_L1_STANDALONE == 1) && (CODE_VERSION != SIMULATION) && (PSP_STANDALONE==0)) */
+
+
+#include "armio/armio.h"
+#include "timer/timer.h"
+
+#if (OP_L1_STANDALONE == 0)
+  #include "rvf/rvf_api.h"
+  #include "rvm/rvm_api.h"  /* A-M-E-N-D-E-D!	*/
+  #include "sim/sim.h"
+#endif
+
+#include "abb/abb.h"
+
+#include "inth/iq.h"
+#include "tpudrv.h"
+#include "memif/mem.h"
+#include "clkm/clkm.h"
+#include "inth/inth.h"
+
+#if (OP_L1_STANDALONE == 1)
+  #include "uart/serialswitch_core.h"
+#else
+  #include "uart/serialswitch.h"
+#endif
+#include "uart/traceswitch.h"
+
+
+#include "dma/dma.h"
+#include "rhea/rhea_arm.h"
+
+#include "ulpd/ulpd.h"
+
+#if (PSP_STANDALONE == 0)
+ #if (OP_L1_STANDALONE == 0)
+  extern void ffs_main_init(void);
+  extern void create_tasks(void);
+  #if TI_NUC_MONITOR == 1
+    extern void ti_nuc_monitor_tdma_action( void );
+  #endif
+
+  #if WCP_PROF == 1
+    #if PRF_CALIBRATION == 1
+      extern NU_HISR prf_CalibrationHISR;
+    #endif
+  #endif
+
+ #else
+  void l1ctl_pgm_clk32(UWORD32 nb_hf, UWORD32 nb_32khz);
+  extern void L1_trace_string(char *s);
+ #endif   /* (OP_L1_STANDALONE) */
+#endif
+
+#if (OP_L1_STANDALONE == 1)
+  #if ((TRACE_TYPE==1) || (TRACE_TYPE==2) || (TRACE_TYPE==3)  || (TRACE_TYPE==7) || TESTMODE)
+    #include "uart/uart.h"
+/*
+ * Serial Configuration set up.
+ */
+
+    extern char ser_cfg_info[NUMBER_OF_TR_UART];
+    #include "rvt_gen.h"
+    extern T_RVT_USER_ID trace_id;
+  #endif
+#endif   /* (OP_L1_STANDALONE == 1) */
+
+/*
+ * Serial Configuration set up.
+ */
+
+/*
+** One config is:
+** {XXX_BT_HCI,         // Bluetooth HCI
+**  XXX_FAX_DATA,       // Fax/Data AT-Cmd
+**  XXX_TRACE,          // L1/Riviera Trace Mux
+**  XXX_TRACE},         // Trace PS
+**
+** with XXX being DUMMY, UART_IRDA or UART_MODEM
+*/
+
+#if ((((TRACE_TYPE==1) || (TRACE_TYPE==2) || (TRACE_TYPE==3)  || (TRACE_TYPE==7) ||\
+       (TESTMODE)) && (OP_L1_STANDALONE == 1)) || (OP_L1_STANDALONE == 0))
+  #if (OP_L1_STANDALONE == 1)
+    static T_AppliSerialInfo appli_ser_cfg_info =
+  #else
+    T_AppliSerialInfo appli_ser_cfg_info =
+  #endif   /* OP_L1_STANDALONE */
+            {
+  #ifdef CONFIG_RVTMUX_ON_MODEM
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_MODEM_TRACE,
+               DUMMY_TRACE},       // 0x0248
+  #else // RVTMUX_ON_MODEM
+              {DUMMY_BT_HCI,
+               UART_MODEM_FAX_DATA,
+               UART_IRDA_TRACE,
+              DUMMY_TRACE},    // default config = 0x0168
+  #endif
+  #ifdef BTEMOBILE
+             12,	// 12 serial config allowed
+  #else // BTEMOBILE
+             9,	// 9 serial config allowed
+  #endif
+             {
+              // Configs with Condat Panel only
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               DUMMY_TRACE,
+               UART_IRDA_TRACE},   // 0x1048
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               DUMMY_TRACE,
+               UART_MODEM_TRACE},  // 0x2048
+              // Configs with L1/Riviera Trace only
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_IRDA_TRACE,
+               DUMMY_TRACE},       // 0x0148
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_MODEM_TRACE,
+               DUMMY_TRACE},       // 0x0248
+              // Configs with AT-Cmd only
+              {DUMMY_BT_HCI,
+               UART_MODEM_FAX_DATA,
+               DUMMY_TRACE,
+               DUMMY_TRACE},       // 0x0068
+              // Configs with Condat Panel and L1/Riviera Trace
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_MODEM_TRACE,
+               UART_IRDA_TRACE},	 // 0x1248
+              {DUMMY_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_IRDA_TRACE,
+               UART_MODEM_TRACE},	 // 0x2148
+              // Configs with Condat Panel and AT-Cmd
+              {DUMMY_BT_HCI,
+               UART_MODEM_FAX_DATA,
+               DUMMY_TRACE,
+               UART_IRDA_TRACE},   // 0x1068
+  #ifdef BTEMOBILE
+              // Configs with L1/Riviera Trace and Bluetooth HCI
+              {UART_IRDA_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_MODEM_TRACE,
+               DUMMY_TRACE},       // 0x0249
+              {UART_MODEM_BT_HCI,
+               DUMMY_FAX_DATA,
+               UART_IRDA_TRACE,
+               DUMMY_TRACE},       // 0x014A
+              // Configs with AT-Cmd and Bluetooth HCI
+              {UART_IRDA_BT_HCI,
+               UART_MODEM_FAX_DATA,
+               DUMMY_TRACE,
+               DUMMY_TRACE},       // 0x0069
+  #endif // BTEMOBILE
+              // Configs with L1/Riviera Trace and AT-Cmd
+              {DUMMY_BT_HCI,
+               UART_MODEM_FAX_DATA,
+               UART_IRDA_TRACE,
+               DUMMY_TRACE}        // 0x0168
+             }
+            };
+  #endif   /* (TRACE_TYPE ...) || (OP_L1_STANDALONE == 0) */
+
+
+/*
+ * Init_Target
+ *
+ * Performs low-level HW Initialization.
+ */
+void Init_Target(void)
+{
+  #if (BOARD == 5)
+    #define WS_ROM  (1)
+    #define WS_RAM  (1)
+    #define WS_APIF (1)
+    #define WS_CS2  (7) /* LCD on EVA3. */
+    #define WS_CS0  (7) /* DUART on EVA3. UART16750 and latch on A-Sample. */
+    #define WS_CS1  (7) /* LCD on A-Sample. */
+
+    IQ_InitWaitState (WS_ROM, WS_RAM, WS_APIF, WS_CS2, WS_CS0, WS_CS1);
+    IQ_InitClock (2); /* Internal clock division factor. */
+
+    IQ_MaskAll (); /* Mask all interrupts. */
+    IQ_SetupInterrupts (); /* IRQ priorities. */
+
+    TM_DisableWatchdog ();
+
+    /*
+     * Reset all TSP and DBG fdefault values
+     */
+
+    AI_ResetTspIO ();
+    AI_ResetDbgReg ();
+    AI_ResetIoConfig ();
+
+    /*
+     * Warning! The external reset signal is connected to the Omega and the
+     * external device. If the layer 1 is used its initialization removes
+     * the external reset. If the application does not use the layer 1
+     * you must remove the external reset (bit 2 of the reset control
+     * register 0x505808).
+     */
+
+    AI_ResetTspIO();
+    AI_ResetDbgReg();
+    AI_ResetIoConfig();
+
+    /*
+     * Configure all IOs (see RD300 specification).
+     */
+
+    AI_ConfigBitAsInput (1);
+    AI_EnableBit (1);
+
+    AI_ConfigBitAsOutput (2);
+    AI_EnableBit (2);
+
+    AI_ConfigBitAsInput (11);
+    AI_EnableBit (11);
+
+    AI_ConfigBitAsOutput (13);
+    AI_EnableBit (13);
+
+    AI_Power (1); /* Maintain power supply. */
+
+  #elif (BOARD == 6) || (BOARD == 7) || (BOARD == 8) || (BOARD == 9) || \
+        (BOARD == 40) || (BOARD == 41) || (BOARD == 42) || (BOARD == 43) || (BOARD == 45) || \
+        (BOARD == 35) || (BOARD == 46) || (BOARD == 70) || (BOARD == 71)
+
+#if (PSP_STANDALONE == 0)
+    // RIF/SPI rising edge clock for ULYSSE
+    //--------------------------------------------------
+    #if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3)|| (ANLG_FAM == 11))
+      #if ((CHIPSET >= 3))
+        #if (CHIPSET == 12)
+          F_CONF_RIF_RX_RISING_EDGE;
+          F_CONF_SPI_RX_RISING_EDGE;
+        #elif (CHIPSET == 15)
+	     //do the DRP init here for Locosto
+	     #if (L1_DRP == 1)
+	     //  drp_power_on(); This should be done after the script is downloaded.
+	     #endif
+        #else
+          #if (BOARD==35)
+            *((volatile SYS_UWORD16 *) ASIC_CONF) = 0x2000;
+          #elif defined(CONFIG_TARGET_PIRELLI)
+            /*
+             * Pirelli's version of this Init_Target() function
+             * in their fw sets the ASIC_CONF register to 0x6050,
+             * which means PWL on the LT/PWL pin and LPG on the
+             * DSR_MODEM pin.
+             */
+            *((volatile SYS_UWORD16 *) ASIC_CONF) = 0x6050;
+          #elif defined(CONFIG_TARGET_GTAMODEM)
+            /*
+             * The DSR_MODEM/LPG Calypso signal is unconnected on
+             * Openmoko's modem, so let's mux it as LPG (output)
+             * so it doesn't float, like Foxconn seem to have done
+             * on the Pirelli.
+             */
+            *((volatile SYS_UWORD16 *) ASIC_CONF) = 0x6040;
+          #else
+            *((volatile SYS_UWORD16 *) ASIC_CONF) = 0x6000;
+          #endif   /* (BOARD == 35) */
+        #endif
+      #endif
+    #endif   /* ANLG(ANALOG)) */
+
+    #if (OP_L1_STANDALONE == 1)
+      #if (BOARD == 40) || (BOARD == 41) || \
+            (BOARD == 42) || (BOARD == 43) || (BOARD == 45)
+        // enable 8 Ohm amplifier for audio on D-sample
+        AI_ConfigBitAsOutput (1);
+        AI_SetBit(1);
+      #elif (BOARD == 70) || (BOARD == 71)
+	  //Locosto I-sample or UPP costo board.BOARD
+	  // Initialize the ARMIO bits as per the I-sample spec
+	  // FIXME
+      #endif
+    #endif   /* (OP_L1_STANDALONE == 1) */
+#endif /* PSP_STANDALONE ==0 */
+
+    // Watchdog
+    //--------------------------------------------------
+    TM_DisableWatchdog();    /* Disable Watchdog */
+    #if (CHIPSET == 12) || (CHIPSET == 15)
+      TM_SEC_DisableWatchdog();
+    #endif
+
+    #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12) || (CHIPSET == 15))
+
+      #if (CHIPSET == 12)
+
+        #if 0   /* example of configuration for DMA debug */
+          #if (BOARD == 6)  /* debug on EVA 4 , GPO2 must not be changed */
+
+            /*  TPU_FRAME, NMIIT, IACKn  */
+            F_DBG_IRQ_CONFIG(C_DBG_IRQ_IRQ4|C_DBG_IRQ_NMIIT|C_DBG_IRQ_IACKN);
+
+            /*  NDMA_REQ_VIEW1, NDMA_REQ_VIEW0, DMA_V(1), DMA_S(1), DMAREQ_P1(3:0)*/
+            F_DBG_DMA_P1_NDFLASH_CONFIG(C_DBG_DMA_P1_NDFLASH_NDMA_REQ_VIEW_1  |
+                                        C_DBG_DMA_P1_NDFLASH_NDMA_REQ_VIEW_0  |
+                                        C_DBG_DMA_P1_NDFLASH_DMA_REQ_P1_3     |
+                                        C_DBG_DMA_P1_NDFLASH_DMA_REQ_P1_2     |
+                                        C_DBG_DMA_P1_NDFLASH_DMA_REQ_P1_1     |
+                                        C_DBG_DMA_P1_NDFLASH_DMA_REQ_P1_0     |
+                                        C_DBG_DMA_P1_NDFLASH_DMA_REQ_S_1      |
+                                        C_DBG_DMA_P1_NDFLASH_DMA_REQ_V1       );
+            /*  DMA_REQ_S(2)*/
+            F_DBG_DMA_P2_CONFIG(C_DBG_DMA_P2_DMA_REQ_S2);
+
+            /*  DMA_CLK_REQ, BRIDGE_CLK */
+            F_DBG_CLK1_CONFIG(C_DBG_CLK1_DMA_CLK_REQ  |
+                              C_DBG_CLK1_BRIDGE_CLK   );
+
+            /*  XIO_nREADY */
+            F_DBG_IMIF_CONFIG(C_DBG_IMIF_XIO_NREADY_MEM);
+
+            /* DSP_nIRQ_VIEW1, DSP_nIRQ_VIEW0, BRIDGE_EN */
+            F_DBG_KB_USIM_SHD_CONFIG(C_DBG_KB_USIM_SHD_DSP_NIRQ_VIEW_1  |
+                                     C_DBG_KB_USIM_SHD_DSP_NIRQ_VIEW_0  |
+                                     C_DBG_KB_USIM_SHD_BRIDGE_EN        );
+
+            /* RHEA_nREADY , RHEA_nSTROBE */
+            F_DBG_USIM_CONFIG(C_DBG_USIM_RHEA_NSTROBE |
+                              C_DBG_USIM_RHEA_NREADY  );
+
+            /* XIO_STROBE */
+            F_DBG_MISC2_CONFIG(C_DBG_MISC2_X_IOSTRBN);
+
+            /* DMA_CLK_REQ */
+            F_DBG_CLK2_CONFIG(C_DBG_CLK2_DMA_CLK_REQ2);
+
+            /* DSP_IRQ_SEL0=DMA, DSP_IRQ_SEL1=DMA, DMA_REQ_SEL0=RIF_RX, DMA_REQ_SEL1=RIF_RX */
+            F_DBG_VIEW_CONFIG(0,0,C_DBG_DSP_INT_DMA,
+                                  C_DBG_DSP_INT_DMA,
+                                  C_DMA_CHANNEL_RIF_RX,
+                                  C_DMA_CHANNEL_RIF_RX);
+
+          #endif   /* (BOARD == 6) */
+        #endif   /* DMA debug example */
+      #else
+        /*
+         *  Configure ASIC in order to output the DPLL and ARM clock
+         */
+       // (*( volatile UWORD16* )(0xFFFEF008)) = 0x8000; // DPLL
+       // (*( volatile UWORD16* )(0xFFFEF00E)) = 0x0004; // ARM clock
+       // (*( volatile UWORD16* )(0xfffef004)) = 0x0600; // DSP clock + nIACK
+      #endif   /* (CHIPSET == 12) || CHIPSET == 15*/
+
+
+      /*
+       *  Enable/Disable of clock switch off for INTH, TIMER, BRIDGE and DPLL modules
+       */
+      // IRQ, Timer and bridge may SLEEP
+      // In first step, same configuration as SAMSON
+      //--------------------------------------------------
+      #if (CHIPSET == 12)
+        CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_TIMER_DIS | CLKM_BRIDGE_DIS | CLKM_DPLL_DIS);
+	  #elif (CHIPSET == 15)
+CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_TIMER_DIS | CLKM_CPORT_EN | CLKM_BRIDGE_DIS | 0x8000 ); /* CLKM_DPLL_DIS is remove by Ranga*/
+
+      #else
+        CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_TIMER_DIS);
+
+        // Select VTCXO input frequency
+        //--------------------------------------------------
+        CLKM_UNUSED_VTCXO_26MHZ;
+
+        // Rita RF uses 26MHz VCXO
+        #if (RF_FAM == 12)
+          CLKM_USE_VTCXO_26MHZ;
+        #endif
+        // Renesas RF uses 26MHz on F-sample but 13MHz on TEB
+        #if (RF_FAM == 43) && (BOARD == 46)
+          CLKM_USE_VTCXO_26MHZ;
+        #endif
+      #endif
+
+
+      // Control HOM/SAM automatic switching
+      //--------------------------------------------------
+      *((volatile unsigned short *) CLKM_CNTL_CLK) &= ~CLKM_EN_IDLE3_FLG;
+
+      /*
+       * The following part has been reconstructed from disassembly.
+       */
+      RHEA_INITRHEA(0,0,0xFF);
+      DPLL_INIT_BYPASS_MODE(DPLL_BYPASS_DIV_1);
+      #if (CHIPSET == 8)
+        DPLL_INIT_DPLL_CLOCK(DPLL_LOCK_DIV_1, 6);
+      #elif (CHIPSET == 10)
+        DPLL_INIT_DPLL_CLOCK(DPLL_LOCK_DIV_1, 8);
+      #else
+        #error "We only have DPLL setup for CHIPSETs 8 and 10"
+      #endif
+      CLKM_InitARMClock(0x00, 2, 0); /* no low freq, no ext clock, div by 1 */
+      /*
+       * FreeCalypso change: memory timings and widths
+       * are target-dependent.
+       */
+      #ifdef CONFIG_TARGET_PIRELLI
+        /*
+         * Pirelli's version of this Init_Target() function
+         * in their fw does the following:
+         */
+        MEM_INIT_CS0(4, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS1(4, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS2(5, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS3(4, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS4(7, MEM_DVS_16, MEM_WRITE_EN, 0);
+      #elif defined(CONFIG_TARGET_FCFAM)
+        /*
+         * The settings currently adopted for the FreeCalypso
+         * hardware family, only nCS0, nCS1 and nCS2 are used
+         * presently.
+         */
+        MEM_INIT_CS0(4, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS1(4, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS2(4, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS3(4, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS4(4, MEM_DVS_16, MEM_WRITE_EN, 0);
+      #elif defined(CONFIG_TARGET_DSAMPLE) && (CHIPSET == 8)
+        /*
+         * On D-Sample C05 (older Calypso silicon version) the clocks
+         * run slower: the ARM clock runs at 39 MHz instead of 52 MHz.
+         * Therefore, we need to use fewer wait states to effect
+         * the same memory speed.
+         */
+        MEM_INIT_CS0(2, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS1(2, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS2(2, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS3(2, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS4(0, MEM_DVS_8,  MEM_WRITE_EN, 0);
+      #else
+        /*
+         * The original settings from Openmoko,
+         * only nCS0 and nCS1 are actually used,
+         * same as on Mot C1xx phones,
+         * the nCS2/3/4 settings are dummies from TI.
+         */
+        MEM_INIT_CS0(3, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS1(3, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS2(5, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS3(3, MEM_DVS_16, MEM_WRITE_EN, 0);
+        MEM_INIT_CS4(0, MEM_DVS_8,  MEM_WRITE_EN, 0);
+      #endif
+      MEM_INIT_CS6(0, MEM_DVS_32, MEM_WRITE_EN, 0);
+      MEM_INIT_CS7(0, MEM_DVS_32, MEM_WRITE_DIS, 0);
+      RHEA_INITAPI(0,1);
+      RHEA_INITARM(0,0);
+      DPLL_SET_PLL_ENABLE;
+
+      /*
+       *  Disable and Clear all pending interrupts
+       */
+      #if (CHIPSET == 12) || (CHIPSET == 15)
+        F_INTH_DISABLE_ALL_IT;           // MASK all it
+        F_INTH2_VALID_NEXT(C_INTH_IRQ);  // reset current IT in INTH2 IRQ
+        F_INTH_VALID_NEXT(C_INTH_IRQ);   // reset current IT in INTH IRQ
+        F_INTH_VALID_NEXT(C_INTH_FIQ);   // reset current IT in INTH FIQ
+        F_INTH_RESET_ALL_IT;             // reset all IRQ/FIQ source
+      #else
+        INTH_DISABLEALLIT;
+        #if 0	/* not present in our reference binary object */
+          INTH_RESETALLIT;
+        #endif
+        INTH_CLEAR;                 /* reset IRQ/FIQ source */
+      #endif
+
+      // INTH
+      //--------------------------------------------------
+      #if (CHIPSET == 12) || (CHIPSET == 15)
+        #if (GSM_IDLE_RAM != 0)
+          f_inth_setup((T_INTH_CONFIG *)a_inth_config_idle_ram);   // setup configuration IT handlers
+        #else
+          f_inth_setup((T_INTH_CONFIG *)a_inth_config);   // setup configuration IT handlers
+        #endif
+      #else
+        IQ_SetupInterrupts();
+      #endif
+
+
+      #if (CHIPSET == 12) || (CHIPSET == 15)
+      #if (OP_L1_STANDALONE == 0)
+
+        f_dma_global_parameter_set((T_DMA_TYPE_GLOBAL_PARAMETER *)&d_dma_global_parameter);
+      #endif
+        f_dma_channel_allocation_set(C_DMA_CHANNEL_0, C_DMA_CHANNEL_DSP);
+     #if (OP_L1_STANDALONE == 1)
+        f_dma_global_parameter_set((T_DMA_TYPE_GLOBAL_PARAMETER *)&d_dma_global_parameter);
+        f_dma_channel_allocation_set(C_DMA_CHANNEL_0, C_DMA_CHANNEL_DSP);
+     #endif
+
+      #else
+        // DMA
+        //--------------------------------------------------
+        // channel0 = Arm, channel1 = Lead, channel2 = forced to Arm, channel3=forced to Arm, dma_burst = 0001, priority = same
+      #if (OP_L1_STANDALONE == 0)
+        DMA_ALLOCDMA(1,0,1,1);  // Channel 1 used by DSP with RIF RX
+      #endif
+      #endif
+
+      /* CHIPSET = 4 or 7 or 8 or 10 or 11 or 12 */
+
+    #else
+
+      // RHEA Bridge
+      //--------------------------------------------------
+      // ACCES_FAC_0 = 0, ACCES_FAC_1 = 0 ,TIMEOUT = 0x7F
+      RHEA_INITRHEA(0,0,0x7F);
+
+      #if (CHIPSET == 6)
+        // WS_H = 1 , WS_L = 15
+        RHEA_INITAPI(1,15);          // should be 0x01E1 for 65 Mhz
+      #else
+        // WS_H = 0 , WS_L = 7
+        RHEA_INITAPI(0,7);           // should be 0x0101 for 65 Mhz
+      #endif
+
+      // Write_en_0 = 0 , Write_en_1 = 0
+      RHEA_INITARM(0,0);
+
+      // INTH
+      //--------------------------------------------------
+      INTH_DISABLEALLIT;          // MASK all it
+      INTH_CLEAR;                 // reset IRQ/FIQ source
+      IQ_SetupInterrupts();
+
+      // DMA
+      //--------------------------------------------------
+      // channel0 = Arm, channel1 = Lead, dma_burst = 0001, priority = same
+      DMA_ALLOCDMA(1,0,1,1);      // should be 0x25   (channel 1 = lead)
+
+      #if (CHIPSET == 6)
+        // Memory WS configuration for ULYSS/G1 (26 Mhz) board
+        //-----------------------------------------------------
+        MEM_INIT_CS2(2,MEM_DVS_16,MEM_WRITE_EN,0);
+      #endif
+
+      // CLKM
+      //--------------------------------------------------
+      CLKM_InitARMClock(0x00, 2); /* no low freq, no ext clock, div by 1 */
+
+      #if (CHIPSET == 6)
+        CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_BRIDGE_DIS | CLKM_TIMER_DIS | CLKM_VTCXO_26);
+      #else
+        CLKM_INITCNTL(CLKM_IRQ_DIS | CLKM_BRIDGE_DIS | CLKM_TIMER_DIS);
+      #endif
+
+    #endif   /* CHIPSET = 4 or 7 or 8 or 10 or 11 or 12 */
+
+    // Freeze ULPD timer ....
+    //--------------------------------------------------
+    *((volatile SYS_UWORD16 *) ULDP_GSM_TIMER_INIT_REG ) = 0;
+    *((volatile SYS_UWORD16 *) ULDP_GSM_TIMER_CTRL_REG ) = TPU_FREEZE;
+
+    // reset INC_SIXTEEN and INC_FRAC
+    //--------------------------------------------------
+    #if (OP_L1_STANDALONE == 1)
+      l1ctl_pgm_clk32(DEFAULT_HFMHZ_VALUE,DEFAULT_32KHZ_VALUE);
+    #else
+      ULDP_INCSIXTEEN_UPDATE(132);    //32768.29038  =>132, 	32500 => 133
+                                      // 26000 --> 166
+      ULDP_INCFRAC_UPDATE(15840);     //32768.29038  =>15840,	32500 => 21845
+                                      // 26000 --> 43691
+    #endif   /*  OP_L1_STANDALONE */
+
+    // program ULPD WAKE-UP ....
+    //=================================================
+    #if (CHIPSET == 2)
+       *((volatile SYS_UWORD16 *)ULDP_SETUP_FRAME_REG)  = SETUP_FRAME;  // 2 frame
+       *((volatile SYS_UWORD16 *)ULDP_SETUP_VTCXO_REG)  = SETUP_VTCXO;  // 31 periods
+       *((volatile SYS_UWORD16 *)ULDP_SETUP_SLICER_REG) = SETUP_SLICER; // 31 periods
+       *((volatile SYS_UWORD16 *)ULDP_SETUP_CLK13_REG)  = SETUP_CLK13;  // 31 periods
+    #else
+       *((volatile SYS_UWORD16 *)ULDP_SETUP_FRAME_REG)  = SETUP_FRAME;  // 3 frames
+       *((volatile SYS_UWORD16 *)ULDP_SETUP_VTCXO_REG)  = SETUP_VTCXO;  // 0 periods
+       *((volatile SYS_UWORD16 *)ULDP_SETUP_SLICER_REG) = SETUP_SLICER; // 31 periods
+       *((volatile SYS_UWORD16 *)ULDP_SETUP_CLK13_REG)  = SETUP_CLK13;  // 31 periods
+       *((volatile SYS_UWORD16 *)ULPD_SETUP_RF_REG)     = SETUP_RF;     // 31 periods
+    #endif
+
+    // Set Gauging versus HF (PLL)
+    //=================================================
+    ULDP_GAUGING_SET_HF;                // Enable gauging versus HF
+    ULDP_GAUGING_HF_PLL;                // Gauging versus PLL
+
+    // current supply for quartz oscillation
+    //=================================================
+    #if (OP_L1_STANDALONE == 1)
+      #if ((CHIPSET != 9) && (CHIPSET != 12) && (CHIPSET !=15)) // programming model changed for Ulysse C035, stay with default value
+        *(volatile SYS_UWORD16 *)QUARTZ_REG  = 0x27;
+      #endif
+    #else
+      #if ((BOARD == 6) || (BOARD == 8) || (BOARD == 9) || (BOARD == 35) || (BOARD == 40) || (BOARD == 41))
+        *((volatile SYS_UWORD16 *)QUARTZ_REG)  = 0x27;
+      #elif (BOARD == 7)
+        *((volatile SYS_UWORD16 *)QUARTZ_REG)  = 0x24;
+      #endif
+    #endif   /* OP_L1_STANDALONE */
+
+    // stop Gauging if any (debug purpose ...)
+    //--------------------------------------------------
+    if ( *((volatile SYS_UWORD16 *) ULDP_GAUGING_CTRL_REG) & ULDP_GAUGING_EN)
+    {
+      volatile UWORD32 j;
+      ULDP_GAUGING_STOP; /* Stop the gauging */
+      /* wait for gauging it*/
+      // one 32khz period = 401 periods of 13Mhz
+      for (j=1; j<50; j++);
+      while (! (* (volatile SYS_UWORD16 *) ULDP_GAUGING_STATUS_REG) & ULDP_IT_GAUGING);
+    }
+
+    #if (OP_L1_STANDALONE == 0)
+      AI_ClockEnable ();
+
+      #if (BOARD == 7)
+        // IOs configuration of the B-Sample in order to optimize the power consumption
+        AI_InitIOConfig();
+
+        // Set LPG instead of DSR_MODEM
+        *((volatile SYS_UWORD16 *) ASIC_CONF) |= 0x40;
+        // Reset the PERM_ON bit of LCR_REG
+        *((volatile SYS_UWORD16 *) MEM_LPG) &= ~(0x80);
+      #elif ((BOARD == 8) || (BOARD == 9))
+        // IOs configuration of the C-Sample in order to optimize the power consumption
+        AI_InitIOConfig();
+
+        // set the debug latch to 0x00.
+        *((volatile SYS_UWORD8 *) 0x2800000) = 0x00;
+      #elif ((BOARD == 35) || (BOARD == 46))
+        AI_InitIOConfig();
+        // CSMI INTERFACE
+        // Initialize CSMI clients for GSM control
+        // and Fax/Data services
+          CSMI_Init();
+          GC_Initialize();  // GSM control initialization
+          CU_Initialize();  // Trace initialization
+          CF_Initialize();  // Fax/Data pre-initialization
+      #elif ((BOARD == 40) || (BOARD == 41))
+        // IOs configuration of the D-Sample in order to optimize the power consumption
+        AI_InitIOConfig();
+
+        #ifdef BTEMOBILE
+          // Reset BT chip by toggling the Island's nRESET_OUT signal
+          *((volatile SYS_UWORD16 *) 0xFFFFFD04) |= 0x04;
+          *((volatile SYS_UWORD16 *) 0xFFFFFD04) &= ~(0x4);
+        #endif
+
+        // set the debug latch to 0x0000.
+        /*
+         * FreeCalypso change: this write is only correct when running
+         * on an actual D-Sample board, but not on any of the real-world
+         * Calypso target devices.
+         */
+        #ifdef CONFIG_TARGET_DSAMPLE
+          *((volatile SYS_UWORD16 *) 0x2700000) = 0x0000;
+        #endif
+      #endif // BOARD
+
+      // Enable HW Timers 1 & 2
+      TM_EnableTimer (1);
+      TM_EnableTimer (2);
+
+    #endif  /* (OP_L1_STANDALONE == 0) */
+
+  #endif   /* #if (BOARD == 5) */
+}
+
+/*
+ * Init_Drivers
+ *
+ * Performs Drivers Initialization.
+ */
+void Set_Switch_ON_Cause(void);
+void Init_Drivers(void)
+{
+
+#if (CHIPSET==15)
+	bspI2c_init();
+	bspTwl3029_init();
+
+	#if (OP_L1_STANDALONE == 0)
+		Set_Switch_ON_Cause();
+	#endif
+
+
+	/* Turn on DRP We will make VRMCC to device group Modem
+	 * And Switch it on.
+	 */
+	bspTwl3029_Power_setDevGrp(NULL,BSP_TWL3029_POWER_VRMMC,BSP_TWL3029_POWER_DEV_GRP_MODEM);
+	wait_ARM_cycles(convert_nanosec_to_cycles(100000*2));
+    bspTwl3029_Power_enable(NULL,BSP_TWL3029_POWER_VRMMC,BSP_TWL3029_POWER_STATE_ACTIVE);
+#endif
+
+#if (CHIPSET!=15)
+  #if ABB_SEMAPHORE_PROTECTION
+    // Create the ABB semaphore
+    ABB_Sem_Create();
+  #endif  // SEMAPHORE_PROTECTION
+#endif
+
+  #if (OP_L1_STANDALONE == 0)
+    /*
+     * Initialize FFS invoking restore procedure by MPU-S
+     */
+    #if ((BOARD == 35) || (BOARD == 46))
+      GC_FfsRestore();
+    #endif
+
+    /*
+     * FFS main initialization.
+     */
+
+    ffs_main_init();
+
+
+    /*
+     * Initialize Riviera manager and create tasks thanks to it.
+     */
+#if (CHIPSET!=15) || (REMU==0)
+    rvf_init();
+    rvm_init();			/* A-M-E-M-D-E-D!	*/
+    create_tasks();
+#endif
+    /*
+     * SIM Main Initialization.
+     */
+    #if (CHIPSET!=15)
+    	SIM_Initialize ();
+    #else
+	bspUicc_bootInit();
+    #endif
+  #endif
+}
+
+/*
+ * Init_Serial_Flows
+ *
+ * Performs Serialswitch + related serial data flows initialization.
+ */
+void Init_Serial_Flows (void)
+{
+  #if (OP_L1_STANDALONE == 0)
+
+    /*
+     * Initialize Serial Switch module.
+     */
+    #if ((BOARD==35) || (BOARD == 46))
+      SER_InitSerialConfig (GC_GetSerialConfig());
+    #else
+      SER_InitSerialConfig (&appli_ser_cfg_info);
+    #endif
+    /*
+     * Then Initialize the Serial Data Flows and the associated UARTs:
+     *  - G2-3 Trace if GSM/GPRS Protocol Stack
+     *  - AT-Cmd/Fax & Data Flow
+     *
+     * Layer1/Riviera Trace Flow and Bluetooth HCI Flow are initialized
+     * by the appropriate SW Entities.
+     *
+     * G2-3 Trace => No more Used
+     */
+    SER_tr_Init(SER_PROTOCOL_STACK, TR_BAUD_38400, NULL);
+
+    /*
+     * Fax & Data / AT-Command Interpreter Serial Data Flow Initialization
+     */
+
+    #if ((BOARD != 35) && (BOARD != 46))
+      (void) SER_fd_Initialize ();
+    #endif
+  #else    /* OP_L1_STANDALONE */
+
+    #if (TESTMODE || (TRACE_TYPE==1) || (TRACE_TYPE==2) || (TRACE_TYPE==3) || (TRACE_TYPE==6) || (TRACE_TYPE==7))
+      #if ((BOARD == 35) || (BOARD == 46))
+        ser_cfg_info[UA_UART_0] = '0';
+      #else
+        ser_cfg_info[UA_UART_0] = 'G';
+      #endif
+      #if (CHIPSET !=15)
+      ser_cfg_info[UA_UART_1] = 'R'; // Riviear Demux on UART MODEM
+      #else
+      ser_cfg_info[UA_UART_0] = 'R'; // Riviear Demux on UART MODEM
+      #endif
+
+      /* init Uart Modem */
+      SER_InitSerialConfig (&appli_ser_cfg_info);
+
+      #if TESTMODE || (TRACE_TYPE == 1) || (TRACE_TYPE == 7)
+        SER_tr_Init (SER_LAYER_1, TR_BAUD_115200, rvt_activate_RX_HISR);
+
+        rvt_register_id("OTHER",&trace_id,(RVT_CALLBACK_FUNC)NULL);
+      #else
+        SER_tr_Init (SER_LAYER_1, TR_BAUD_38400, NULL);
+      #endif
+
+      L1_trace_string(" \n\r");
+
+    #endif   /* TRACE_TYPE */
+
+  #endif   /* OP_L1_STANDALONE */
+}
+
+/*
+ * Init_Unmask_IT
+ *
+ * Unmask all used interrupts.
+ */
+void Init_Unmask_IT (void)
+{
+	IQ_Unmask(IQ_FRAME);
+	IQ_Unmask(IQ_UART_IRDA_IT);
+	IQ_Unmask(IQ_UART_IT);
+	IQ_Unmask(IQ_ARMIO);
+#if (L1_DYN_DSP_DWNLD == 1)
+	IQ_Unmask(IQ_API);
+#endif
+}