FreeCalypso > hg > fc-magnetite
diff src/cs/layer1/include/l1_defty.h @ 0:945cf7f506b2
src/cs: chipsetsw import from tcs211-fcmodem
binary blobs and LCD demo files have been excluded,
all line endings are LF only
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 25 Sep 2016 22:50:11 +0000 |
| parents | |
| children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/src/cs/layer1/include/l1_defty.h Sun Sep 25 22:50:11 2016 +0000 @@ -0,0 +1,2939 @@ +/************* Revision Controle System Header ************* + * GSM Layer 1 software + * L1_DEFTY.H + * + * Filename l1_defty.h + * Copyright 2003 (C) Texas Instruments + * + ************* Revision Controle System Header *************/ +#if(L1_DYN_DSP_DWNLD == 1) + #include "l1_dyn_dwl_defty.h" +#endif + +typedef struct +{ + UWORD16 modulus; + UWORD16 relative_position; +} +T_BCCHS_SCHEDULE; + +typedef struct +{ + UWORD8 schedule_array_size; + T_BCCHS_SCHEDULE schedule_array[10]; +} +T_BCCHS; + +typedef struct +{ + BOOL status; + UWORD16 radio_freq; + UWORD32 fn_offset; + UWORD32 time_alignmt; + UWORD8 sb26_attempt; + UWORD8 tsc; + UWORD16 bcch_blks_req; + UWORD8 timing_validity; + UWORD8 search_mode; + UWORD8 gprs_priority; + UWORD8 sb26_offset; // Set to 1 when SB26 RX win is entirely in frame 25. +#if (L1_12NEIGH ==1) + UWORD32 fn_offset_mem; + UWORD32 time_alignmt_mem; +#endif +} +T_NCELL_SINGLE; + +typedef struct +{ + UWORD8 active_neigh_id_norm; + UWORD8 active_neigh_tc_norm; + UWORD8 active_neigh_id_top; + UWORD8 active_neigh_tc_top; + UWORD8 current_list_size; + T_NCELL_SINGLE list[6]; +} +T_BCCHN_LIST; + +typedef struct +{ + UWORD8 active_fb_id; + UWORD8 active_sbconf_id; + UWORD8 active_sb_id; + UWORD8 current_list_size; + UWORD8 first_in_list; //point at oldest element in list. Used when parsing the list. +#if (L1_EOTD==1) + #if L1_EOTD_QBIT_ACC + // Store serving fn_offset and time_alignmt, so that they can be tracked + // independently. + UWORD32 serv_fn_offset; + UWORD32 serv_time_alignmt; + #endif + // Need to track any TOA updates in dedicated mode else + // QB errors are introduced in the results... + + UWORD8 eotd_toa_phase; + WORD32 eotd_toa_tracking; + WORD32 eotd_cache_toa_tracking; + + UWORD8 eotd_meas_session; + UWORD32 fn_sb_serv; // for methods 1 & 2 + UWORD32 ta_sb_serv; // for methods 1 & 2 + WORD32 teotdS; // for method 2 only + UWORD32 fn_offset_serv; // for method 2 only +#endif +#if (L1_12NEIGH==1) + T_NCELL_SINGLE list[NBR_NEIGHBOURS+1]; // 1 place (13th) for S.C in EOTD. +#else + T_NCELL_SINGLE list[6]; +#endif +} +T_NSYNC_LIST; + +typedef struct +{ + UWORD8 cbch_state; + UWORD32 starting_fn; + UWORD32 first_block[48]; + UWORD8 cbch_num; + UWORD8 schedule_length; + UWORD8 next; + WORD32 start_continuous_fn; +} +T_CBCH_HEAD_SCHEDULE; + +typedef struct +{ + UWORD8 cbch_num; + UWORD8 next; + UWORD32 start_fn[6]; +} +T_CBCH_INFO_SCHEDULE; + +/*=========================================================================*/ +/* Moved type definitions from Debis files. */ +/*=========================================================================*/ +#if (AMR == 1) + // AMR ver 1.0 parameters + typedef struct + { + BOOL noise_suppression_bit; + BOOL initial_codec_mode_indicator; + UWORD8 initial_codec_mode; + UWORD8 active_codec_set; + UWORD8 threshold[3]; + UWORD8 hysteresis[3]; + } + T_AMR_CONFIGURATION; +#endif + +typedef struct +{ + UWORD8 A[7+1]; +} +T_ENCRYPTION_KEY; + +typedef struct +{ + UWORD8 A[22+1]; +} +T_RADIO_FRAME; + +typedef struct +{ + UWORD8 n32; + UWORD8 n51; + UWORD8 n26; +} +T_SHORT_FRAME_NUMBER; + +typedef struct +{ + UWORD16 A[31+1]; +} +T_CHAN_LIST; + +typedef struct +{ + UWORD16 num_of_chans; + T_CHAN_LIST chan_number; +} +T_BCCH_LIST; + +typedef struct +{ + UWORD16 rf_chan_num; + UWORD8 l2_channel_type; + UWORD8 error_cause; + T_RADIO_FRAME l2_frame; + UWORD8 bsic; + UWORD8 tc; +} +T_PH_DATA_IND; + +typedef struct +{ + UWORD16 A[63+1]; +} +T_MA_FIELD; + +typedef struct +{ + UWORD16 rf_chan_cnt; + T_MA_FIELD rf_chan_no; +} +T_MOBILE_ALLOCATION; + +typedef struct +{ + BOOL start_time_present; + T_SHORT_FRAME_NUMBER start_time; +} +T_STARTING_TIME; + +typedef struct +{ + UWORD16 radio_freq_no; + WORD8 rxlev; +} +T_RXLEV_MEAS; + +typedef struct +{ + UWORD8 maio; + UWORD8 hsn; +} +T_HOPPING_RF; + +typedef struct +{ + UWORD16 radio_freq; +} +T_SINGLE_RF; + +typedef union +{ + T_SINGLE_RF single_rf; + T_HOPPING_RF hopping_rf; +} +T_CHN_SEL_CHOICE; + +typedef struct +{ + BOOL h; + T_CHN_SEL_CHOICE rf_channel; +} +T_CHN_SEL; + +typedef struct +{ + T_CHN_SEL chan_sel; + UWORD8 channel_type; + UWORD8 subchannel; + UWORD8 timeslot_no; + UWORD8 tsc; +} +T_CHANNEL_DESCRIPTION; + +typedef struct +{ + UWORD8 ncc; + UWORD8 bcc; + UWORD16 bcch_carrier; +} +T_CELL_DESC; + +typedef struct +{ + T_CELL_DESC cell_description; + T_CHANNEL_DESCRIPTION channel_desc_1; + UWORD8 channel_mode_1; + T_STARTING_TIME starting_time; + UWORD8 ho_acc; + UWORD8 txpwr; + BOOL report_time_diff; + T_MOBILE_ALLOCATION frequency_list; + T_CHANNEL_DESCRIPTION channel_desc_2; + UWORD8 channel_mode_2; + T_MOBILE_ALLOCATION frequency_list_bef_sti; + T_CHANNEL_DESCRIPTION channel_desc_1_bef_sti; + T_CHANNEL_DESCRIPTION channel_desc_2_bef_sti; + BOOL cipher_mode; + UWORD8 a5_algorithm; +} +T_HO_PARAMS; + +typedef struct +{ + T_CHANNEL_DESCRIPTION channel_desc; + T_MOBILE_ALLOCATION frequency_list; + T_STARTING_TIME starting_time; +} +T_MPHC_CHANGE_FREQUENCY; + +typedef struct +{ + UWORD8 subchannel; + UWORD8 channel_mode; + #if (AMR == 1) + T_AMR_CONFIGURATION amr_configuration; + #endif +} +T_MPHC_CHANNEL_MODE_MODIFY_REQ; + +typedef struct +{ + UWORD8 cipher_mode; + UWORD8 a5_algorithm; + T_ENCRYPTION_KEY new_ciph_param; +} +T_MPHC_SET_CIPHERING_REQ; + +typedef struct +{ + UWORD8 sub_channel; + UWORD8 frame_erasure; +} +T_OML1_CLOSE_TCH_LOOP_REQ; + +typedef struct +{ + #if (defined _WINDOWS && (OP_RIV_AUDIO == 1)) + T_RV_HDR header; + #endif + UWORD8 tested_device; +} +T_OML1_START_DAI_TEST_REQ; + +/***********************************************************/ +/* Type definitions for DEBUG... */ +/***********************************************************/ +typedef struct // translate string in int and int in string +{ + CHAR *message; + WORD32 SignalCode; + WORD32 size; +} +MSG_DEBUG; + +typedef struct // translate string in int and int in string +{ + CHAR *name; +} +TASK_TRACE; + +/***********************************************************/ +/* Type definitions for data structures used for MFTAB */ +/* managment... */ +/***********************************************************/ +typedef struct +{ + void (*fct_ptr)(UWORD8,UWORD8); + CHAR param1; + CHAR param2; +} +T_FCT; + +typedef struct +{ + T_FCT fct[L1_MAX_FCT]; +} +T_FRM; + +typedef struct +{ + T_FRM frmlst[MFTAB_SIZE]; +} +T_MFTAB; + +typedef struct +{ + const T_FCT *address; + UWORD8 size; +} +T_TASK_MFTAB; + +/***********************************************************/ +/* TPU controle register components definition. */ +/***********************************************************/ + +#if (CODE_VERSION==SIMULATION) + typedef struct // contents of REG_CMD register + { + unsigned int tpu_reset_bit : 1; // TPU_RESET bit : ON (reset TPU) + unsigned int tpu_pag_bit : 1; // TPU_PAG bit : 0 (page 0) + unsigned int tpu_enb_bit : 1; // TPU_ENB bit : ON (TPU commun.int.) + unsigned int dsp_pag_bit : 1; // DSP_PAG bit : 0 (page 0) + unsigned int dsp_enb_bit : 1; // DSP_ENB bit : ON (DSP commun.int.) + unsigned int tpu_stat_bit : 1; // TPU_STAT bit : ON (if TPU active) OFF (if TPU in IDLE) + unsigned int tpu_idle_bit : 1; // TPU_IDLE bit : ON (force IDLE mode) + } + T_reg_cmd; // Rem: we must keep "unsigned int" type for bitmap. +#else + typedef struct // contents of REG_CMD register + { + unsigned int tpu_reset_bit : 1; // TPU_RESET bit : ON (reset TPU) + unsigned int tpu_pag_bit : 1; // TPU_PAG bit : 0 (page 0) + unsigned int tpu_enb_bit : 1; // TPU_ENB bit : ON (TPU commun.int.) + unsigned int unused_1 : 1; // + unsigned int dsp_enb_bit : 1; // DSP_ENB bit : ON (DSP commun.int.) + unsigned int unused_2 : 1; // + unsigned int unused_3 : 1; // + unsigned int tsp_reset_bit : 1; // TSP_RESET bit : ON (reset TSP) + unsigned int tpu_idle_bit : 1; // TPU_IDLE bit : ON (force IDLE mode) + unsigned int tup_wait_bit : 1; // TPU_WAIT bit : ON (TPU ready) + unsigned int tpu_ck_enb_bit: 1; // TPU_CLK bit : ON (TPU clock on) + } + T_reg_cmd; +#endif +/***********************************************************/ +/* */ +/* Data structure for global info components. */ +/* */ +/***********************************************************/ + +typedef struct +{ + API d_task_d; // (0) Downlink task command. + API d_burst_d; // (1) Downlink burst identifier. + API d_task_u; // (2) Uplink task command. + API d_burst_u; // (3) Uplink burst identifier. + API d_task_md; // (4) Downlink Monitoring (FB/SB) command. +#if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) + API d_background; // (5) Background tasks +#else + API d_reserved; // (5) Reserved +#endif + API d_debug; // (6) Debug/Acknowledge/general purpose word. + API d_task_ra; // (7) RA task command. + API d_fn; // (8) FN, in Rep. period and FN%104, used for TRAFFIC/TCH only. + // bit [0..7] -> b_fn_report, FN in the normalized reporting period. + // bit [8..15] -> b_fn_sid, FN % 104, used for SID positionning. + API d_ctrl_tch; // (9) Tch channel description. + // bit [0..3] -> b_chan_mode, channel mode. + // bit [4..5] -> b_chan_type, channel type. + // bit [6] -> reset SACCH + // bit [7] -> vocoder ON + // bit [8] -> b_sync_tch_ul, synchro. TCH/UL. + // bit [9] -> b_sync_tch_dl, synchro. TCH/DL. + // bit [10] -> b_stop_tch_ul, stop TCH/UL. + // bit [11] -> b_stop_tch_dl, stop TCH/DL. + // bit [12.13] -> b_tch_loop, tch loops A/B/C. + API hole; // (10) unused hole. + +#if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3)) + API d_ctrl_abb; // (11) Bit field indicating the analog baseband register to send. + // bit [0] -> b_ramp: the ramp information(a_ramp[]) is located in NDB + // bit [1.2] -> unused + // bit [3] -> b_apcdel: delays-register in NDB + // bit [4] -> b_afc: freq control register in DB + // bit [5..15] -> unused +#endif + API a_a5fn[2]; // (12..13) Encryption Frame number. + // word 0, bit [0..4] -> T2. + // word 0, bit [5..10] -> T3. + // word 1, bit [0..11] -> T1. + API d_power_ctl; // (14) Power level control. + API d_afc; // (15) AFC value (enabled by "b_afc" in "d_ctrl_TCM4400 or in d_ctrl_abb"). + API d_ctrl_system; // (16) Controle Register for RESET/RESUME. + // bit [0..2] -> b_tsq, training sequence. + // bit [3] -> b_bcch_freq_ind, BCCH frequency indication. + // bit [15] -> b_task_abort, DSP task abort command. +} +T_DB_MCU_TO_DSP; + +typedef struct +{ + API d_task_d; // (0) Downlink task command. + API d_burst_d; // (1) Downlink burst identifier. + API d_task_u; // (2) Uplink task command. + API d_burst_u; // (3) Uplink burst identifier. + API d_task_md; // (4) Downlink Monitoring (FB/SB) task command. +#if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) + API d_background; // (5) Background tasks +#else + API d_reserved; // (5) Reserved +#endif + API d_debug; // (6) Debug/Acknowledge/general purpose word. + API d_task_ra; // (7) RA task command. + +#if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) + API a_serv_demod[4]; // ( 8..11) Serv. cell demod. result, array of 4 words (D_TOA,D_PM,D_ANGLE,D_SNR). + API a_pm[3]; // (12..14) Power measurement results, array of 3 words. + API a_sch[5]; // (15..19) Header + SB information, array of 5 words. +#else + API a_pm[3]; // ( 8..10) Power measurement results, array of 3 words. + API a_serv_demod[4]; // (11..14) Serv. cell demod. result, array of 4 words (D_TOA,D_PM,D_ANGLE,D_SNR). + API a_sch[5]; // (15..19) Header + SB information, array of 5 words. +#endif +} +T_DB_DSP_TO_MCU; + +#if (DSP == 34) || (DSP == 35) || (DSP == 36) // NDB GSM + typedef struct + { + // MISC Tasks + API d_dsp_page; + + // DSP status returned (DSP --> MCU). + API d_error_status; + + // RIF control (MCU -> DSP). + API d_spcx_rif; + + API d_tch_mode; // TCH mode register. + // bit [0..1] -> b_dai_mode. + // bit [2] -> b_dtx. + + API d_debug1; // bit 0 at 1 enable dsp f_tx delay for Omega + + API d_dsp_test; + + // Words dedicated to Software version (DSP code + Patch) + API d_version_number1; + API d_version_number2; + + API d_debug_ptr; + API d_debug_bk; + + API d_pll_config; + + // GSM/GPRS DSP Debug trace support + API p_debug_buffer; + API d_debug_buffer_size; + API d_debug_trace_type; + + #if (W_A_DSP_IDLE3 == 1) + // DSP report its state: 0 run, 1 Idle1, 2 Idle2, 3 Idle3. + API d_dsp_state; + // 5 words are reserved for any possible mapping modification + API d_hole1_ndb[2]; + #else + // 6 words are reserved for any possible mapping modification + API d_hole1_ndb[3]; + #endif + + #if (AMR == 1) + API p_debug_amr; + #else + API d_hole_debug_amr; + #endif + + #if (CHIPSET == 12) + #if (DSP == 35) || (DSP == 36) + API d_hole2_ndb[1]; + API d_mcsi_select; + #else + API d_hole2_ndb[2]; + #endif + #else + API d_hole2_ndb[2]; + #endif + + // New words APCDEL1 and APCDEL2 for 2TX: TX/PRACH combinations + API d_apcdel1_bis; + API d_apcdel2_bis; + + + // New registers due to IOTA analog base band + API d_apcdel2; + API d_vbctrl2; + API d_bulgcal; + + // Analog Based Band + API d_afcctladd; + + API d_vbuctrl; + API d_vbdctrl; + API d_apcdel1; + API d_apcoff; + API d_bulioff; + API d_bulqoff; + API d_dai_onoff; + API d_auxdac; + + #if (ANLG_FAM == 1) + API d_vbctrl; + #elif ((ANLG_FAM == 2) || (ANLG_FAM == 3)) + API d_vbctrl1; + #endif + + API d_bbctrl; + + // Monitoring tasks control (MCU <- DSP) + // FB task + API d_fb_det; // FB detection result. (1 for FOUND). + API d_fb_mode; // Mode for FB detection algorithm. + API a_sync_demod[4]; // FB/SB demod. result, (D_TOA,D_PM,D_ANGLE,D_SNR). + + // SB Task + API a_sch26[5]; // Header + SB information, array of 5 words. + + API d_audio_gain_ul; + API d_audio_gain_dl; + + // Controller of the melody E2 audio compressor + API d_audio_compressor_ctrl; + + // AUDIO module + API d_audio_init; + API d_audio_status; + + // Audio tasks + // TONES (MCU -> DSP) + API d_toneskb_init; + API d_toneskb_status; + API d_k_x1_t0; + API d_k_x1_t1; + API d_k_x1_t2; + API d_pe_rep; + API d_pe_off; + API d_se_off; + API d_bu_off; + API d_t0_on; + API d_t0_off; + API d_t1_on; + API d_t1_off; + API d_t2_on; + API d_t2_off; + API d_k_x1_kt0; + API d_k_x1_kt1; + API d_dur_kb; + API d_shiftdl; + API d_shiftul; + + API d_aec_ctrl; + + API d_es_level_api; + API d_mu_api; + + // Melody Ringer module + API d_melo_osc_used; + API d_melo_osc_active; + API a_melo_note0[4]; + API a_melo_note1[4]; + API a_melo_note2[4]; + API a_melo_note3[4]; + API a_melo_note4[4]; + API a_melo_note5[4]; + API a_melo_note6[4]; + API a_melo_note7[4]; + + // selection of the melody format + API d_melody_selection; + + // Holes due to the format melody E1 + API a_melo_holes[3]; + + // Speech Recognition module + API d_sr_status; // status of the DSP speech reco task + API d_sr_param; // paramters for the DSP speech reco task: OOV threshold. + API d_sr_bit_exact_test; // bit exact test + API d_sr_nb_words; // number of words used in the speech recognition task + API d_sr_db_level; // estimate voice level in dB + API d_sr_db_noise; // estimate noise in dB + API d_sr_mod_size; // size of the model + API a_n_best_words[4]; // array of the 4 best words + API a_n_best_score[8]; // array of the 4 best scores (each score is 32 bits length) + + // Audio buffer + API a_dd_1[22]; // Header + DATA traffic downlink information, sub. chan. 1. + API a_du_1[22]; // Header + DATA traffic uplink information, sub. chan. 1. + + // V42bis module + API d_v42b_nego0; + API d_v42b_nego1; + API d_v42b_control; + API d_v42b_ratio_ind; + API d_mcu_control; + API d_mcu_control_sema; + + // Background tasks + API d_background_enable; + API d_background_abort; + API d_background_state; + API d_max_background; + API a_background_tasks[16]; + API a_back_task_io[16]; + + // GEA module defined in l1p_deft.h (the following section is overlaid with GPRS NDB memory) + API d_gea_mode_ovly; + API a_gea_kc_ovly[4]; + +#if (ANLG_FAM == 3) + // SYREN specific registers + API d_vbpop; + API d_vau_delay_init; + API d_vaud_cfg; + API d_vauo_onoff; + API d_vaus_vol; + API d_vaud_pll; + API d_hole3_ndb[1]; +#elif ((ANLG_FAM == 1) || (ANLG_FAM == 2)) + + API d_hole3_ndb[7]; + +#endif + + // word used for the init of USF threshold + API d_thr_usf_detect; + + // Encryption module + API d_a5mode; // Encryption Mode. + + API d_sched_mode_gprs_ovly; + + // 7 words are reserved for any possible mapping modification + API d_hole4_ndb[5]; + + // Ramp definition for Omega device + API a_ramp[16]; + + // CCCH/SACCH downlink information...(!!) + API a_cd[15]; // Header + CCCH/SACCH downlink information. + + // FACCH downlink information........(!!) + API a_fd[15]; // Header + FACCH downlink information. + + // Traffic downlink data frames......(!!) + API a_dd_0[22]; // Header + DATA traffic downlink information, sub. chan. 0. + + // CCCH/SACCH uplink information.....(!!) + API a_cu[15]; // Header + CCCH/SACCH uplink information. + + // FACCH downlink information........(!!) + API a_fu[15]; // Header + FACCH uplink information + + // Traffic downlink data frames......(!!) + API a_du_0[22]; // Header + DATA traffic uplink information, sub. chan. 0. + + // Random access.....................(MCU -> DSP). + API d_rach; // RACH information. + + //...................................(MCU -> DSP). + API a_kc[4]; // Encryption Key Code. + + // Integrated Data Services module + API d_ra_conf; + API d_ra_act; + API d_ra_test; + API d_ra_statu; + API d_ra_statd; + API d_fax; + API a_data_buf_ul[21]; + API a_data_buf_dl[37]; + + // GTT API mapping for DSP code 34 (for test only) + #if (L1_GTT == 1) + API d_tty_status; + API d_tty_detect_thres; + API d_ctm_detect_shift; + API d_tty_fa_thres; + API d_tty_mod_norm; + API d_tty_reset_buffer_ul; + API d_tty_loop_ctrl; + API p_tty_loop_buffer; + #else + API a_tty_holes[8]; + #endif + + API a_sr_holes0[414]; + + #if (L1_NEW_AEC) + // new AEC + API d_cont_filter; + API d_granularity_att; + API d_coef_smooth; + API d_es_level_max; + API d_fact_vad; + API d_thrs_abs; + API d_fact_asd_fil; + API d_fact_asd_mut; + API d_far_end_pow_h; + API d_far_end_pow_l; + API d_far_end_noise_h; + API d_far_end_noise_l; + #else + API a_new_aec_holes[12]; + #endif // L1_NEW_AEC + + // Speech recognition model + API a_sr_holes1[145]; + API d_cport_init; + API d_cport_ctrl; + API a_cport_cfr[2]; + API d_cport_tcl_tadt; + API d_cport_tdat; + API d_cport_tvs; + API d_cport_status; + API d_cport_reg_value; + + API a_cport_holes[1011]; + + API a_model[1041]; + + // EOTD buffer +#if (L1_EOTD==1) + API d_eotd_first; + API d_eotd_max; + API d_eotd_nrj_high; + API d_eotd_nrj_low; + API a_eotd_crosscor[18]; +#else + API a_eotd_holes[22]; +#endif + // AMR ver 1.0 buffers + API a_amr_config[4]; + API a_ratscch_ul[6]; + API a_ratscch_dl[6]; + API d_amr_snr_est; // estimation of the SNR of the AMR speech block + #if (L1_VOICE_MEMO_AMR) + API d_amms_ul_voc; + #else + API a_voice_memo_amr_holes[1]; + #endif + API d_thr_onset_afs; // thresh detection ONSET AFS + API d_thr_sid_first_afs; // thresh detection SID_FIRST AFS + API d_thr_ratscch_afs; // thresh detection RATSCCH AFS + API d_thr_update_afs; // thresh detection SID_UPDATE AFS + API d_thr_onset_ahs; // thresh detection ONSET AHS + API d_thr_sid_ahs; // thresh detection SID frames AHS + API d_thr_ratscch_marker;// thresh detection RATSCCH MARKER + API d_thr_sp_dgr; // thresh detection SPEECH DEGRADED/NO_DATA + API d_thr_soft_bits; + #if (MELODY_E2) + API d_melody_e2_osc_stop; + API d_melody_e2_osc_active; + API d_melody_e2_semaphore; + API a_melody_e2_osc[16][3]; + API d_melody_e2_globaltimefactor; + API a_melody_e2_instrument_ptr[8]; + API d_melody_e2_deltatime; + + #if (AMR_THRESHOLDS_WORKAROUND) + API a_d_macc_thr_afs[8]; + API a_d_macc_thr_ahs[6]; + #else + API a_melody_e2_holes0[14]; + #endif + + API a_melody_e2_holes1[693]; + API a_dsp_trace[SC_AUDIO_MELODY_E2_MAX_SIZE_OF_DSP_TRACE]; + API a_melody_e2_instrument_wave[SC_AUDIO_MELODY_E2_MAX_SIZE_OF_INSTRUMENT]; + #else + API d_holes[61]; + #if (AMR_THRESHOLDS_WORKAROUND) + API a_d_macc_thr_afs[8]; + API a_d_macc_thr_ahs[6]; + #endif + #endif + + } + T_NDB_MCU_DSP; +#elif (DSP == 33) // NDB GSM + typedef struct + { + // MISC Tasks + API d_dsp_page; + + // DSP status returned (DSP --> MCU). + API d_error_status; + + // RIF control (MCU -> DSP). + API d_spcx_rif; + + API d_tch_mode; // TCH mode register. + // bit [0..1] -> b_dai_mode. + // bit [2] -> b_dtx. + + API d_debug1; // bit 0 at 1 enable dsp f_tx delay for Omega + + API d_dsp_test; + + // Words dedicated to Software version (DSP code + Patch) + API d_version_number1; + API d_version_number2; + + API d_debug_ptr; + API d_debug_bk; + + API d_pll_config; + + // GSM/GPRS DSP Debug trace support + API p_debug_buffer; + API d_debug_buffer_size; + API d_debug_trace_type; + + #if (W_A_DSP_IDLE3 == 1) + // DSP report its state: 0 run, 1 Idle1, 2 Idle2, 3 Idle3. + API d_dsp_state; + // 10 words are reserved for any possible mapping modification + API d_hole1_ndb[5]; + #else + // 11 words are reserved for any possible mapping modification + API d_hole1_ndb[6]; + #endif + + // New words APCDEL1 and APCDEL2 for 2TX: TX/PRACH combinations + API d_apcdel1_bis; + API d_apcdel2_bis; + + + // New registers due to IOTA analog base band + API d_apcdel2; + API d_vbctrl2; + API d_bulgcal; + + // Analog Based Band + API d_afcctladd; + + API d_vbuctrl; + API d_vbdctrl; + API d_apcdel1; + API d_apcoff; + API d_bulioff; + API d_bulqoff; + API d_dai_onoff; + API d_auxdac; + + #if (ANLG_FAM == 1) + API d_vbctrl; + #elif ((ANLG_FAM == 2) || (ANLG_FAM == 3)) + API d_vbctrl1; + #endif + + API d_bbctrl; + + // Monitoring tasks control (MCU <- DSP) + // FB task + API d_fb_det; // FB detection result. (1 for FOUND). + API d_fb_mode; // Mode for FB detection algorithm. + API a_sync_demod[4]; // FB/SB demod. result, (D_TOA,D_PM,D_ANGLE,D_SNR). + + // SB Task + API a_sch26[5]; // Header + SB information, array of 5 words. + + API d_audio_gain_ul; + API d_audio_gain_dl; + + // Controller of the melody E2 audio compressor + API d_audio_compressor_ctrl; + + // AUDIO module + API d_audio_init; + API d_audio_status; + + // Audio tasks + // TONES (MCU -> DSP) + API d_toneskb_init; + API d_toneskb_status; + API d_k_x1_t0; + API d_k_x1_t1; + API d_k_x1_t2; + API d_pe_rep; + API d_pe_off; + API d_se_off; + API d_bu_off; + API d_t0_on; + API d_t0_off; + API d_t1_on; + API d_t1_off; + API d_t2_on; + API d_t2_off; + API d_k_x1_kt0; + API d_k_x1_kt1; + API d_dur_kb; + API d_shiftdl; + API d_shiftul; + + API d_aec_ctrl; + + API d_es_level_api; + API d_mu_api; + + // Melody Ringer module + API d_melo_osc_used; + API d_melo_osc_active; + API a_melo_note0[4]; + API a_melo_note1[4]; + API a_melo_note2[4]; + API a_melo_note3[4]; + API a_melo_note4[4]; + API a_melo_note5[4]; + API a_melo_note6[4]; + API a_melo_note7[4]; + + // selection of the melody format + API d_melody_selection; + + // Holes due to the format melody E1 + API a_melo_holes[3]; + + // Speech Recognition module + API d_sr_status; // status of the DSP speech reco task + API d_sr_param; // paramters for the DSP speech reco task: OOV threshold. + API d_sr_bit_exact_test; // bit exact test + API d_sr_nb_words; // number of words used in the speech recognition task + API d_sr_db_level; // estimate voice level in dB + API d_sr_db_noise; // estimate noise in dB + API d_sr_mod_size; // size of the model + API a_n_best_words[4]; // array of the 4 best words + API a_n_best_score[8]; // array of the 4 best scores (each score is 32 bits length) + + // Audio buffer + API a_dd_1[22]; // Header + DATA traffic downlink information, sub. chan. 1. + API a_du_1[22]; // Header + DATA traffic uplink information, sub. chan. 1. + + // V42bis module + API d_v42b_nego0; + API d_v42b_nego1; + API d_v42b_control; + API d_v42b_ratio_ind; + API d_mcu_control; + API d_mcu_control_sema; + + // Background tasks + API d_background_enable; + API d_background_abort; + API d_background_state; + API d_max_background; + API a_background_tasks[16]; + API a_back_task_io[16]; + + // GEA module defined in l1p_deft.h (the following section is overlaid with GPRS NDB memory) + API d_gea_mode_ovly; + API a_gea_kc_ovly[4]; + + API d_hole3_ndb[8]; + + // Encryption module + API d_a5mode; // Encryption Mode. + + API d_sched_mode_gprs_ovly; + + // 7 words are reserved for any possible mapping modification + API d_hole4_ndb[5]; + + // Ramp definition for Omega device + API a_ramp[16]; + + // CCCH/SACCH downlink information...(!!) + API a_cd[15]; // Header + CCCH/SACCH downlink information. + + // FACCH downlink information........(!!) + API a_fd[15]; // Header + FACCH downlink information. + + // Traffic downlink data frames......(!!) + API a_dd_0[22]; // Header + DATA traffic downlink information, sub. chan. 0. + + // CCCH/SACCH uplink information.....(!!) + API a_cu[15]; // Header + CCCH/SACCH uplink information. + + // FACCH downlink information........(!!) + API a_fu[15]; // Header + FACCH uplink information + + // Traffic downlink data frames......(!!) + API a_du_0[22]; // Header + DATA traffic uplink information, sub. chan. 0. + + // Random access.....................(MCU -> DSP). + API d_rach; // RACH information. + + //...................................(MCU -> DSP). + API a_kc[4]; // Encryption Key Code. + + // Integrated Data Services module + API d_ra_conf; + API d_ra_act; + API d_ra_test; + API d_ra_statu; + API d_ra_statd; + API d_fax; + API a_data_buf_ul[21]; + API a_data_buf_dl[37]; + + #if (L1_NEW_AEC) + // new AEC + API a_new_aec_holes[422]; + API d_cont_filter; + API d_granularity_att; + API d_coef_smooth; + API d_es_level_max; + API d_fact_vad; + API d_thrs_abs; + API d_fact_asd_fil; + API d_fact_asd_mut; + API d_far_end_pow_h; + API d_far_end_pow_l; + API d_far_end_noise_h; + API d_far_end_noise_l; + #endif + + // Speech recognition model + #if (L1_NEW_AEC) + API a_sr_holes[1165]; + #else + API a_sr_holes[1599]; + #endif // L1_NEW_AEC + API a_model[1041]; + + // EOTD buffer + #if (L1_EOTD==1) + API d_eotd_first; + API d_eotd_max; + API d_eotd_nrj_high; + API d_eotd_nrj_low; + API a_eotd_crosscor[18]; + #else + API a_eotd_holes[22]; + #endif + + #if (MELODY_E2) + API a_melody_e2_holes0[27]; + API d_melody_e2_osc_used; + API d_melody_e2_osc_active; + API d_melody_e2_semaphore; + API a_melody_e2_osc[16][3]; + API d_melody_e2_globaltimefactor; + API a_melody_e2_instrument_ptr[8]; + API a_melody_e2_holes1[708]; + API a_dsp_trace[SC_AUDIO_MELODY_E2_MAX_SIZE_OF_DSP_TRACE]; + API a_melody_e2_instrument_wave[SC_AUDIO_MELODY_E2_MAX_SIZE_OF_INSTRUMENT]; + #endif + } + T_NDB_MCU_DSP; + +#elif ((DSP == 32) || (DSP == 31)) + typedef struct + { + // Monitoring tasks control..........(MCU <- DSP) + API d_fb_det; // FB detection result. (1 for FOUND). + API d_fb_mode; // Mode for FB detection algorithm. + API a_sync_demod[4]; // FB/SB demod. result, (D_TOA,D_PM,D_ANGLE,D_SNR). + + // CCCH/SACCH downlink information...(!!) + API a_cd[15]; // Header + CCCH/SACCH downlink information. + + // FACCH downlink information........(!!) + API a_fd[15]; // Header + FACCH downlink information. + + // Traffic downlink data frames......(!!) + API a_dd_0[22]; // Header + DATA traffic downlink information, sub. chan. 0. + API a_dd_1[22]; // Header + DATA traffic downlink information, sub. chan. 1. + + // CCCH/SACCH uplink information.....(!!) + API a_cu[15]; // Header + CCCH/SACCH uplink information. + + #if (SPEECH_RECO) + // FACCH downlink information........(!!) + API a_fu[3]; // Header + FACCH uplink information + // The size of this buffer is 15 word but some speech reco words + // are overlayer with this buffer. This is the reason why the size is 3 instead of 15. + API d_sr_status; // status of the DSP speech reco task + API d_sr_param; // paramters for the DSP speech reco task: OOV threshold. + API sr_hole1; // hole + API d_sr_bit_exact_test; // bit exact test + API d_sr_nb_words; // number of words used in the speech recognition task + API d_sr_db_level; // estimate voice level in dB + API d_sr_db_noise; // estimate noise in dB + API d_sr_mod_size; // size of the model + API sr_holes_1[4]; // hole + #else + // FACCH downlink information........(!!) + API a_fu[15]; // Header + FACCH uplink information + #endif + + // Traffic uplink data frames........(!!) + API a_du_0[22]; // Header + DATA traffic uplink information, sub. chan. 0. + API a_du_1[22]; // Header + DATA traffic uplink information, sub. chan. 1. + + // Random access.....................(MCU -> DSP). + API d_rach; // RACH information. + + //...................................(MCU -> DSP). + API d_a5mode; // Encryption Mode. + API a_kc[4]; // Encryption Key Code. + API d_tch_mode; // TCH mode register. + // bit [0..1] -> b_dai_mode. + // bit [2] -> b_dtx. + + // OMEGA...........................(MCU -> DSP). + #if ((ANLG_FAM == 1) || (ANLG_FAM == 2)) + API a_ramp[16]; + #if (MELODY_E1) + API d_melo_osc_used; + API d_melo_osc_active; + API a_melo_note0[4]; + API a_melo_note1[4]; + API a_melo_note2[4]; + API a_melo_note3[4]; + API a_melo_note4[4]; + API a_melo_note5[4]; + API a_melo_note6[4]; + API a_melo_note7[4]; + #if (DSP==31) + // selection of the melody format + API d_melody_selection; + API holes[9]; + #else // DSP==32 + API d_dco_type; // Tide + API p_start_IQ; + API d_level_off; + API d_dco_dbg; + API d_tide_resa; + API d_asynch_margin; // Perseus Asynch Audio Workaround + API hole[4]; + #endif // DSP 32 + + #else // NO MELODY E1 + #if (DSP==31) + // selection of the melody format + API d_melody_selection; + API holes[43]; // 43 unused holes. + #else // DSP==32 + API holes[34]; // 34 unused holes. + API d_dco_type; // Tide + API p_start_IQ; + API d_level_off; + API d_dco_dbg; + API d_tide_resa; + API d_asynch_margin; // Perseus Asynch Audio Workaround + API hole[4]; + #endif //DSP == 32 + #endif // NO MELODY E1 + + API d_debug3; + API d_debug2; + API d_debug1; // bit 0 at 1 enable dsp f_tx delay for Omega + API d_afcctladd; + API d_vbuctrl; + API d_vbdctrl; + API d_apcdel1; + API d_aec_ctrl; + API d_apcoff; + API d_bulioff; + API d_bulqoff; + API d_dai_onoff; + API d_auxdac; + + #if (ANLG_FAM == 1) + API d_vbctrl; + #elif (ANLG_FAM == 2) + API d_vbctrl1; + #endif + + API d_bbctrl; + #else + #error DSPCODE not supported with given ANALOG + #endif //(ANALOG)1, 2 + //...................................(MCU -> DSP). + API a_sch26[5]; // Header + SB information, array of 5 words. + + // TONES.............................(MCU -> DSP) + API d_toneskb_init; + API d_toneskb_status; + API d_k_x1_t0; + API d_k_x1_t1; + API d_k_x1_t2; + API d_pe_rep; + API d_pe_off; + API d_se_off; + API d_bu_off; + API d_t0_on; + API d_t0_off; + API d_t1_on; + API d_t1_off; + API d_t2_on; + API d_t2_off; + API d_k_x1_kt0; + API d_k_x1_kt1; + API d_dur_kb; + + // PLL...............................(MCU -> DSP). + API d_pll_clkmod1; + API d_pll_clkmod2; + + // DSP status returned..........(DSP --> MCU). + API d_error_status; + + // RIF control.......................(MCU -> DSP). + API d_spcx_rif; + + API d_shiftdl; + API d_shiftul; + + API p_saec_prog; + API p_aec_prog; + API p_spenh_prog; + + API a_ovly[75]; + API d_ra_conf; + API d_ra_act; + API d_ra_test; + API d_ra_statu; + API d_ra_statd; + API d_fax; + #if (SPEECH_RECO) + API a_data_buf_ul[3]; + API a_n_best_words[4]; // array of the 4 best words + API a_n_best_score[8]; // array of the 4 best scores (each score is 32 bits length) + API sr_holes_2[6]; + API a_data_buf_dl[37]; + + API a_hole[24]; + + API d_sched_mode_gprs_ovly; + + API fir_holes1[384]; + API a_fir31_uplink[31]; + API a_fir31_downlink[31]; + API d_audio_init; + API d_audio_status; + + API a_model[1041]; // array of the speech reco model + #else + API a_data_buf_ul[21]; + API a_data_buf_dl[37]; + + API a_hole[24]; + + API d_sched_mode_gprs_ovly; + + API fir_holes1[384]; + API a_fir31_uplink[31]; + API a_fir31_downlink[31]; + API d_audio_init; + API d_audio_status; + +#if (L1_EOTD ==1) + API a_eotd_hole[369]; + + API d_eotd_first; + API d_eotd_max; + API d_eotd_nrj_high; + API d_eotd_nrj_low; + API a_eotd_crosscor[18]; +#endif + #endif + } + T_NDB_MCU_DSP; + + +#else // OTHER DSP CODE like 17 + +typedef struct +{ + // Monitoring tasks control..........(MCU <- DSP) + API d_fb_det; // FB detection result. (1 for FOUND). + API d_fb_mode; // Mode for FB detection algorithm. + API a_sync_demod[4]; // FB/SB demod. result, (D_TOA,D_PM,D_ANGLE,D_SNR). + + // CCCH/SACCH downlink information...(!!) + API a_cd[15]; // Header + CCCH/SACCH downlink information. + + // FACCH downlink information........(!!) + API a_fd[15]; // Header + FACCH downlink information. + + // Traffic downlink data frames......(!!) + #if (DATA14_4 == 0) + API a_dd_0[20]; // Header + DATA traffic downlink information, sub. chan. 0. + API a_dd_1[20]; // Header + DATA traffic downlink information, sub. chan. 1. + #endif + #if (DATA14_4 == 1) + API a_dd_0[22]; // Header + DATA traffic downlink information, sub. chan. 0. + API a_dd_1[22]; // Header + DATA traffic downlink information, sub. chan. 1. + #endif + + // CCCH/SACCH uplink information.....(!!) + API a_cu[15]; // Header + CCCH/SACCH uplink information. + + #if (SPEECH_RECO) + // FACCH downlink information........(!!) + API a_fu[3]; // Header + FACCH uplink information + // The size of this buffer is 15 word but some speech reco words + // are overlayer with this buffer. This is the reason why the size is 3 instead of 15. + API d_sr_status; // status of the DSP speech reco task + API d_sr_param; // paramters for the DSP speech reco task: OOV threshold. + API sr_hole1; // hole + API d_sr_bit_exact_test; // bit exact test + API d_sr_nb_words; // number of words used in the speech recognition task + API d_sr_db_level; // estimate voice level in dB + API d_sr_db_noise; // estimate noise in dB + API d_sr_mod_size; // size of the model + API sr_holes_1[4]; // hole + #else + // FACCH downlink information........(!!) + API a_fu[15]; // Header + FACCH uplink information + #endif + + // Traffic uplink data frames........(!!) + #if (DATA14_4 == 0) + API a_du_0[20]; // Header + DATA traffic uplink information, sub. chan. 0. + API a_du_1[20]; // Header + DATA traffic uplink information, sub. chan. 1. + #endif + #if (DATA14_4 == 1) + API a_du_0[22]; // Header + DATA traffic uplink information, sub. chan. 0. + API a_du_1[22]; // Header + DATA traffic uplink information, sub. chan. 1. + #endif + + // Random access.....................(MCU -> DSP). + API d_rach; // RACH information. + + //...................................(MCU -> DSP). + API d_a5mode; // Encryption Mode. + API a_kc[4]; // Encryption Key Code. + API d_tch_mode; // TCH mode register. + // bit [0..1] -> b_dai_mode. + // bit [2] -> b_dtx. + + // OMEGA...........................(MCU -> DSP). + +#if ((ANLG_FAM == 1) || (ANLG_FAM == 2)) + API a_ramp[16]; + #if (MELODY_E1) + API d_melo_osc_used; + API d_melo_osc_active; + API a_melo_note0[4]; + API a_melo_note1[4]; + API a_melo_note2[4]; + API a_melo_note3[4]; + API a_melo_note4[4]; + API a_melo_note5[4]; + API a_melo_note6[4]; + API a_melo_note7[4]; + #if (DSP == 17) + // selection of the melody format + API d_dco_type; // Tide + API p_start_IQ; + API d_level_off; + API d_dco_dbg; + API d_tide_resa; + API d_asynch_margin; // Perseus Asynch Audio Workaround + API hole[4]; + #else + API d_melody_selection; + API holes[9]; + #endif + #else // NO MELODY E1 + // selection of the melody format + #if (DSP == 17) + API holes[34]; // 34 unused holes. + API d_dco_type; // Tide + API p_start_IQ; + API d_level_off; + API d_dco_dbg; + API d_tide_resa; + API d_asynch_margin; // Perseus Asynch Audio Workaround + API hole[4] + #else + // selection of the melody format + API d_melody_selection; + API holes[43]; // 43 unused holes. + #endif + #endif + API d_debug3; + API d_debug2; + API d_debug1; // bit 0 at 1 enable dsp f_tx delay for Omega + API d_afcctladd; + API d_vbuctrl; + API d_vbdctrl; + API d_apcdel1; + API d_aec_ctrl; + API d_apcoff; + API d_bulioff; + API d_bulqoff; + API d_dai_onoff; + API d_auxdac; + #if (ANLG_FAM == 1) + API d_vbctrl; + #elif (ANLG_FAM == 2) + API d_vbctrl1; + #endif + API d_bbctrl; + + #else + #error DSPCODE not supported with given ANALOG + #endif //(ANALOG)1, 2 + //...................................(MCU -> DSP). + API a_sch26[5]; // Header + SB information, array of 5 words. + + // TONES.............................(MCU -> DSP) + API d_toneskb_init; + API d_toneskb_status; + API d_k_x1_t0; + API d_k_x1_t1; + API d_k_x1_t2; + API d_pe_rep; + API d_pe_off; + API d_se_off; + API d_bu_off; + API d_t0_on; + API d_t0_off; + API d_t1_on; + API d_t1_off; + API d_t2_on; + API d_t2_off; + API d_k_x1_kt0; + API d_k_x1_kt1; + API d_dur_kb; + + // PLL...............................(MCU -> DSP). + API d_pll_clkmod1; + API d_pll_clkmod2; + + // DSP status returned..........(DSP --> MCU). + API d_error_status; + + // RIF control.......................(MCU -> DSP). + API d_spcx_rif; + + API d_shiftdl; + API d_shiftul; + + #if (AEC == 1) + // AEC control.......................(MCU -> DSP). + #if (VOC == FR_EFR) + API p_aec_init; + API p_aec_prog; + API p_spenh_init; + API p_spenh_prog; + #endif + + #if (VOC == FR_HR_EFR) + API p_saec_prog; + API p_aec_prog; + API p_spenh_prog; + #endif + #endif + + API a_ovly[75]; + API d_ra_conf; + API d_ra_act; + API d_ra_test; + API d_ra_statu; + API d_ra_statd; + API d_fax; + #if (SPEECH_RECO) + API a_data_buf_ul[3]; + API a_n_best_words[4]; // array of the 4 best words + API a_n_best_score[8]; // array of the 4 best scores (each score is 32 bits length) + API sr_holes_2[6]; + API a_data_buf_dl[37]; + + API fir_holes1[409]; + API a_fir31_uplink[31]; + API a_fir31_downlink[31]; + API d_audio_init; + API d_audio_status; + API a_model[1041]; // array of the speech reco model + #else + API a_data_buf_ul[21]; + API a_data_buf_dl[37]; + + API fir_holes1[409]; + API a_fir31_uplink[31]; + API a_fir31_downlink[31]; + API d_audio_init; + API d_audio_status; + #endif +} +T_NDB_MCU_DSP; +#endif + +#if (DSP == 34) || (DSP == 35) || (DSP == 36) +typedef struct +{ + API_SIGNED d_transfer_rate; + + // Common GSM/GPRS + // These words specified the latencies to applies on some peripherics + API_SIGNED d_lat_mcu_bridge; + API_SIGNED d_lat_mcu_hom2sam; + API_SIGNED d_lat_mcu_bef_fast_access; + API_SIGNED d_lat_dsp_after_sam; + + // DSP Start address + API_SIGNED d_gprs_install_address; + + API_SIGNED d_misc_config; + + API_SIGNED d_cn_sw_workaround; + + API_SIGNED d_hole2_param[4]; + + //...................................Frequency Burst. + API_SIGNED d_fb_margin_beg; + API_SIGNED d_fb_margin_end; + API_SIGNED d_nsubb_idle; + API_SIGNED d_nsubb_dedic; + API_SIGNED d_fb_thr_det_iacq; + API_SIGNED d_fb_thr_det_track; + //...................................Demodulation. + API_SIGNED d_dc_off_thres; + API_SIGNED d_dummy_thres; + API_SIGNED d_dem_pond_gewl; + API_SIGNED d_dem_pond_red; + + //...................................TCH Full Speech. + API_SIGNED d_maccthresh1; + API_SIGNED d_mldt; + API_SIGNED d_maccthresh; + API_SIGNED d_gu; + API_SIGNED d_go; + API_SIGNED d_attmax; + API_SIGNED d_sm; + API_SIGNED d_b; + + // V42Bis module + API_SIGNED d_v42b_switch_hyst; + API_SIGNED d_v42b_switch_min; + API_SIGNED d_v42b_switch_max; + API_SIGNED d_v42b_reset_delay; + + //...................................TCH Half Speech. + API_SIGNED d_ldT_hr; + API_SIGNED d_maccthresh_hr; + API_SIGNED d_maccthresh1_hr; + API_SIGNED d_gu_hr; + API_SIGNED d_go_hr; + API_SIGNED d_b_hr; + API_SIGNED d_sm_hr; + API_SIGNED d_attmax_hr; + + //...................................TCH Enhanced FR Speech. + API_SIGNED c_mldt_efr; + API_SIGNED c_maccthresh_efr; + API_SIGNED c_maccthresh1_efr; + API_SIGNED c_gu_efr; + API_SIGNED c_go_efr; + API_SIGNED c_b_efr; + API_SIGNED c_sm_efr; + API_SIGNED c_attmax_efr; + + //...................................CHED + API_SIGNED d_sd_min_thr_tchfs; + API_SIGNED d_ma_min_thr_tchfs; + API_SIGNED d_md_max_thr_tchfs; + API_SIGNED d_md1_max_thr_tchfs; + + API_SIGNED d_sd_min_thr_tchhs; + API_SIGNED d_ma_min_thr_tchhs; + API_SIGNED d_sd_av_thr_tchhs; + API_SIGNED d_md_max_thr_tchhs; + API_SIGNED d_md1_max_thr_tchhs; + + API_SIGNED d_sd_min_thr_tchefs; + API_SIGNED d_ma_min_thr_tchefs; + API_SIGNED d_md_max_thr_tchefs; + API_SIGNED d_md1_max_thr_tchefs; + + API_SIGNED d_wed_fil_ini; + API_SIGNED d_wed_fil_tc; + API_SIGNED d_x_min; + API_SIGNED d_x_max; + API_SIGNED d_slope; + API_SIGNED d_y_min; + API_SIGNED d_y_max; + API_SIGNED d_wed_diff_threshold; + API_SIGNED d_mabfi_min_thr_tchhs; + + // FACCH module + API_SIGNED d_facch_thr; + + // IDS module + API_SIGNED d_max_ovsp_ul; + API_SIGNED d_sync_thres; + API_SIGNED d_idle_thres; + API_SIGNED d_m1_thres; + API_SIGNED d_max_ovsp_dl; + API_SIGNED d_gsm_bgd_mgt; + + // FIR coefficients + API a_fir_holes[4]; + API a_fir31_uplink[31]; + API a_fir31_downlink[31]; +} +T_PARAM_MCU_DSP; +#elif (DSP == 33) +typedef struct +{ + API_SIGNED d_transfer_rate; + + // Common GSM/GPRS + // These words specified the latencies to applies on some peripherics + API_SIGNED d_lat_mcu_bridge; + API_SIGNED d_lat_mcu_hom2sam; + API_SIGNED d_lat_mcu_bef_fast_access; + API_SIGNED d_lat_dsp_after_sam; + + // DSP Start address + API_SIGNED d_gprs_install_address; + + API_SIGNED d_misc_config; + + API_SIGNED d_cn_sw_workaround; + + #if DCO_ALGO + API_SIGNED d_cn_dco_param; + + API_SIGNED d_hole2_param[3]; + #else + API_SIGNED d_hole2_param[4]; + #endif + + //...................................Frequency Burst. + API_SIGNED d_fb_margin_beg; + API_SIGNED d_fb_margin_end; + API_SIGNED d_nsubb_idle; + API_SIGNED d_nsubb_dedic; + API_SIGNED d_fb_thr_det_iacq; + API_SIGNED d_fb_thr_det_track; + //...................................Demodulation. + API_SIGNED d_dc_off_thres; + API_SIGNED d_dummy_thres; + API_SIGNED d_dem_pond_gewl; + API_SIGNED d_dem_pond_red; + + //...................................TCH Full Speech. + API_SIGNED d_maccthresh1; + API_SIGNED d_mldt; + API_SIGNED d_maccthresh; + API_SIGNED d_gu; + API_SIGNED d_go; + API_SIGNED d_attmax; + API_SIGNED d_sm; + API_SIGNED d_b; + + // V42Bis module + API_SIGNED d_v42b_switch_hyst; + API_SIGNED d_v42b_switch_min; + API_SIGNED d_v42b_switch_max; + API_SIGNED d_v42b_reset_delay; + + //...................................TCH Half Speech. + API_SIGNED d_ldT_hr; + API_SIGNED d_maccthresh_hr; + API_SIGNED d_maccthresh1_hr; + API_SIGNED d_gu_hr; + API_SIGNED d_go_hr; + API_SIGNED d_b_hr; + API_SIGNED d_sm_hr; + API_SIGNED d_attmax_hr; + + //...................................TCH Enhanced FR Speech. + API_SIGNED c_mldt_efr; + API_SIGNED c_maccthresh_efr; + API_SIGNED c_maccthresh1_efr; + API_SIGNED c_gu_efr; + API_SIGNED c_go_efr; + API_SIGNED c_b_efr; + API_SIGNED c_sm_efr; + API_SIGNED c_attmax_efr; + + //...................................CHED + API_SIGNED d_sd_min_thr_tchfs; + API_SIGNED d_ma_min_thr_tchfs; + API_SIGNED d_md_max_thr_tchfs; + API_SIGNED d_md1_max_thr_tchfs; + + API_SIGNED d_sd_min_thr_tchhs; + API_SIGNED d_ma_min_thr_tchhs; + API_SIGNED d_sd_av_thr_tchhs; + API_SIGNED d_md_max_thr_tchhs; + API_SIGNED d_md1_max_thr_tchhs; + + API_SIGNED d_sd_min_thr_tchefs; + API_SIGNED d_ma_min_thr_tchefs; + API_SIGNED d_md_max_thr_tchefs; + API_SIGNED d_md1_max_thr_tchefs; + + API_SIGNED d_wed_fil_ini; + API_SIGNED d_wed_fil_tc; + API_SIGNED d_x_min; + API_SIGNED d_x_max; + API_SIGNED d_slope; + API_SIGNED d_y_min; + API_SIGNED d_y_max; + API_SIGNED d_wed_diff_threshold; + API_SIGNED d_mabfi_min_thr_tchhs; + + // FACCH module + API_SIGNED d_facch_thr; + + // IDS module + API_SIGNED d_max_ovsp_ul; + API_SIGNED d_sync_thres; + API_SIGNED d_idle_thres; + API_SIGNED d_m1_thres; + API_SIGNED d_max_ovsp_dl; + API_SIGNED d_gsm_bgd_mgt; + + // FIR coefficients + API a_fir_holes[4]; + API a_fir31_uplink[31]; + API a_fir31_downlink[31]; +} +T_PARAM_MCU_DSP; + +#else + +typedef struct +{ + //...................................Frequency Burst. + API_SIGNED d_nsubb_idle; + API_SIGNED d_nsubb_dedic; + API_SIGNED d_fb_thr_det_iacq; + API_SIGNED d_fb_thr_det_track; + //...................................Demodulation. + API_SIGNED d_dc_off_thres; + API_SIGNED d_dummy_thres; + API_SIGNED d_dem_pond_gewl; + API_SIGNED d_dem_pond_red; + API_SIGNED hole[1]; + API_SIGNED d_transfer_rate; + //...................................TCH Full Speech. + API_SIGNED d_maccthresh1; + API_SIGNED d_mldt; + API_SIGNED d_maccthresh; + API_SIGNED d_gu; + API_SIGNED d_go; + API_SIGNED d_attmax; + API_SIGNED d_sm; + API_SIGNED d_b; + + #if (VOC == FR_HR) || (VOC == FR_HR_EFR) + //...................................TCH Half Speech. + API_SIGNED d_ldT_hr; + API_SIGNED d_maccthresh_hr; + API_SIGNED d_maccthresh1_hr; + API_SIGNED d_gu_hr; + API_SIGNED d_go_hr; + API_SIGNED d_b_hr; + API_SIGNED d_sm_hr; + API_SIGNED d_attmax_hr; + #endif + + #if (VOC == FR_EFR) || (VOC == FR_HR_EFR) + //...................................TCH Enhanced FR Speech. + API_SIGNED c_mldt_efr; + API_SIGNED c_maccthresh_efr; + API_SIGNED c_maccthresh1_efr; + API_SIGNED c_gu_efr; + API_SIGNED c_go_efr; + API_SIGNED c_b_efr; + API_SIGNED c_sm_efr; + API_SIGNED c_attmax_efr; + #endif + + //...................................TCH Full Speech. + API_SIGNED d_sd_min_thr_tchfs; + API_SIGNED d_ma_min_thr_tchfs; + API_SIGNED d_md_max_thr_tchfs; + API_SIGNED d_md1_max_thr_tchfs; + + #if (VOC == FR) || (VOC == FR_HR) || (VOC == FR_HR_EFR) + //...................................TCH Half Speech. + API_SIGNED d_sd_min_thr_tchhs; + API_SIGNED d_ma_min_thr_tchhs; + API_SIGNED d_sd_av_thr_tchhs; + API_SIGNED d_md_max_thr_tchhs; + API_SIGNED d_md1_max_thr_tchhs; + #endif + + #if (VOC == FR_EFR) || (VOC == FR_HR_EFR) + //...................................TCH Enhanced FR Speech. + API_SIGNED d_sd_min_thr_tchefs; //(24L *C_POND_RED) + API_SIGNED d_ma_min_thr_tchefs; //(1200L *C_POND_RED) + API_SIGNED d_md_max_thr_tchefs; //(2000L *C_POND_RED) + API_SIGNED d_md1_max_thr_tchefs; //(160L *C_POND_RED) + API_SIGNED d_hole1; + #endif + + API_SIGNED d_wed_fil_ini; + API_SIGNED d_wed_fil_tc; + API_SIGNED d_x_min; + API_SIGNED d_x_max; + API_SIGNED d_slope; + API_SIGNED d_y_min; + API_SIGNED d_y_max; + API_SIGNED d_wed_diff_threshold; + API_SIGNED d_mabfi_min_thr_tchhs; + API_SIGNED d_facch_thr; + API_SIGNED d_dsp_test; + + + #if (DATA14_4 == 0 ) || (VOC == FR_HR_EFR) + API_SIGNED d_patch_addr1; + API_SIGNED d_patch_data1; + API_SIGNED d_patch_addr2; + API_SIGNED d_patch_data2; + API_SIGNED d_patch_addr3; + API_SIGNED d_patch_data3; + API_SIGNED d_patch_addr4; + API_SIGNED d_patch_data4; + #endif + + //................................... + API_SIGNED d_version_number; // DSP patch version + API_SIGNED d_ti_version; // customer number. No more used since 1.5 + + API_SIGNED d_dsp_page; + + #if IDS + API_SIGNED d_max_ovsp_ul; + API_SIGNED d_sync_thres; + API_SIGNED d_idle_thres; + API_SIGNED d_m1_thres; + API_SIGNED d_max_ovsp_dl; + #endif + + +} +T_PARAM_MCU_DSP; +#endif + +#if (DSP_DEBUG_TRACE_ENABLE == 1) +typedef struct +{ + API d_debug_ptr_begin; + API d_debug_ptr_end; +} +T_DB2_DSP_TO_MCU; +#endif + +/*************************************************************/ +/* Time informations... */ +/*************************************************************/ +/* */ +/*************************************************************/ +typedef struct +{ + UWORD32 fn; // FN count + UWORD16 t1; // FN div (26*51), (0..2047). + UWORD8 t2; // FN modulo 26. + UWORD8 t3; // FN modulo 51. + UWORD8 tc; // Scell: TC + UWORD8 fn_in_report; // FN modulo 102 or 104. + UWORD16 fn_mod42432; // FN modulo 42432. + UWORD8 fn_mod13; // FN modulo 13. + #if L1_GPRS + UWORD8 fn_mod52; // FN modulo 52. + UWORD8 fn_mod104; // FN modulo 104. + UWORD8 fn_mod13_mod4; // FN modulo 13 modulo 4. + UWORD32 block_id; // Block ID + #endif +} +T_TIME_INFO; + +/*************************************************************/ +/* Idle mode tasks information... */ +/*************************************************************/ +/* must be filled according to Idle parameters... */ +/* ... */ +/*************************************************************/ +typedef struct +{ + UWORD8 pg_position; // Paging block starting frame. + UWORD8 extpg_position; // Extended Paging block starting frame. +} +T_IDLE_TASK_INFO; + +/*************************************************************/ +/* SDCCH information structure. */ +/*************************************************************/ +/* */ +/* */ +/*************************************************************/ +typedef struct +{ + UWORD8 dl_sdcch_position; + UWORD8 dl_sacch_position; + UWORD8 ul_sdcch_position; + UWORD8 ul_sacch_position; + UWORD8 mon_area_position; +} +T_SDCCH_DESC; + +/*************************************************************/ +/* Random Access Task information structure. */ +/*************************************************************/ +/* */ +/* */ +/*************************************************************/ +typedef struct +{ + WORD32 rand; // 16 bit signed !! + UWORD8 channel_request; + UWORD8 ra_to_ctrl; + UWORD8 ra_num; +} +T_RA_TASK_INFO; + +/***************************************************************************************/ +/* Measurement info element for last input level table */ +/***************************************************************************************/ +typedef struct +{ + UWORD8 lna_off; // 1 if lna switch is off. + UWORD8 input_level; // last measured input level in dbm. +} +T_INPUT_LEVEL; + +/***************************************************************************************/ +/* Measurement info element for Neighbor cell lists. */ +/***************************************************************************************/ +typedef struct +{ + UWORD16 radio_freq; // carrier id. + WORD32 acc; // Accumulation of measurements already performed. + UWORD8 nbr_meas; +} +T_MEAS_INFO; + +typedef struct +{ + UWORD16 bcch_freq; + WORD16 rxlev_acc; + UWORD8 rxlev_nbr_meas; +} +T5_CELL_MEAS; + +typedef struct +{ + T5_CELL_MEAS A[33]; +} +T5_NCELL_MEAS; + +/***************************************************************************************/ +/* Measurement info element serving cell in dedicated mode */ +/***************************************************************************************/ +typedef struct +{ + WORD32 acc_sub; // Subset: accu. rxlev meas. + UWORD32 nbr_meas_sub; // Subset: nbr meas. of rxlev. + UWORD32 qual_acc_full; // Fullset: accu. rxqual meas. + UWORD32 qual_acc_sub; // Subset: accu. rxqual meas. + UWORD32 qual_nbr_meas_full; // Fullset: nbr meas. of rxqual. + UWORD32 qual_nbr_meas_sub; // Subset: nbr meas. of rxqual. + UWORD8 dtx_used; // Set when DTX as been used in current reporting period. +} +T_SMEAS; + +/***************************************************************************************/ +/* */ +/***************************************************************************************/ +typedef struct +{ + UWORD8 new_status; + UWORD8 current_status; + WORD32 time_to_exec; +} +T_TASK_STATUS; + +/***************************************************************************************/ +/* Cell/Carrier info: identity, RX level measurement, time info, gain controle info. */ +/***************************************************************************************/ +typedef struct +{ + // Carrier/Cell Identity. + UWORD16 radio_freq; // carrier id. + WORD32 bsic; // BSIC. + + // Time difference information. + UWORD32 fn_offset; // offset between fn of this NCELL and the SCELL fn. + UWORD32 time_alignmt; // time alignment. + + // Receive Level Measurement info. structure. + T_MEAS_INFO meas; + T_INPUT_LEVEL traffic_meas; + T_INPUT_LEVEL traffic_meas_beacon; + + // Beacon frequency FIFO + UWORD8 buff_beacon[4]; + + #if L1_GPRS + // Receive Level measurements in packet transfer mode + // Daughter frequencies info. + T_INPUT_LEVEL transfer_meas; + + // Power reduction on serving cell PCCCH / PBCCH + UWORD8 pb; + #endif + + // Number of unsuccessfull attempt on SB reading. + UWORD8 attempt_count; + + // System information bitmap. + UWORD32 si_bit_map; // System info. bitmap used for BCCH reading. +} +T_CELL_INFO; + + +typedef struct +{ + UWORD16 A[32+1]; +} +TC_CHAN_LIST; + + +typedef struct +{ + UWORD8 num_of_chans; + TC_CHAN_LIST chan_list; + BOOL pwrc; + BOOL dtx_allowed; + UWORD8 ba_id; +} +T_NEW_BA_LIST; + + +typedef struct +{ + UWORD8 ba_id; // BA list identifier. + + UWORD32 nbr_carrier; // number of carriers in the BA list. + UWORD8 np_ctrl; // Tels the meas_manager which PCH burst has been controled. + + UWORD8 first_index; // First BA index measured in current session. + + UWORD8 next_to_ctrl; // Carrier for next power measurement result. + UWORD8 next_to_read; // Measurement session time spent. + + UWORD8 ms_ctrl; + UWORD8 ms_ctrl_d; + UWORD8 ms_ctrl_dd; + + UWORD8 used_il [2]; + UWORD8 used_il_d [2]; + UWORD8 used_il_dd[2]; + + UWORD8 used_lna [2]; + UWORD8 used_lna_d [2]; + UWORD8 used_lna_dd[2]; + + T_MEAS_INFO A[32+1]; // list of 32 neighbors + 1 serving. + + BOOL new_list_present; + T_NEW_BA_LIST new_list; +} +T_BA_LIST; + +typedef struct +{ + UWORD16 radio_freq; + WORD16 accum_power_result; +} +T_POWER_ARRAY; + +typedef struct +{ + UWORD16 power_array_size; + T_POWER_ARRAY power_array[NBMAX_CARRIER]; +} +T_FULL_LIST_MEAS; + +typedef struct +{ + UWORD32 nbr_sat_carrier_ctrl; // Nb of saturated carriers after a pm session in ctrl. + UWORD32 nbr_sat_carrier_read; // Nb of saturated carriers after a pm session in read. + + UWORD8 meas_1st_pass_ctrl; // flag for 1st pass during a pm session in ctrl. + UWORD8 meas_1st_pass_read; // flag for 1st pass during a pm session in read. + + UWORD32 next_to_ctrl; // Carrier for next power measurement result. + UWORD32 next_to_read; // Measurement session time spent. + + UWORD8 ms_ctrl; + UWORD8 ms_ctrl_d; + UWORD8 ms_ctrl_dd; + + UWORD8 sat_flag[NBMAX_CARRIER]; + // last measure was saturated, so not valid +} +T_FULL_LIST; + +/*************************************************************/ +/* Dedicated channel information structure... */ +/*************************************************************/ +/* */ +/*************************************************************/ +typedef struct +{ + T_CHANNEL_DESCRIPTION *desc_ptr; // Ptr to the Active channel description + T_CHANNEL_DESCRIPTION desc; // Channel description for AFTER STI. + T_CHANNEL_DESCRIPTION desc_bef_sti; // Channel description for BEFORE STI. + UWORD8 mode; // Channel mode. + UWORD8 tch_loop; // TCH loop mode. +} +T_CHANNEL_INFO; + +/*************************************************************/ +/* Mobile allocation information structure... */ +/*************************************************************/ +/* */ +/*************************************************************/ +typedef struct +{ + T_MOBILE_ALLOCATION *alist_ptr; // Ptr to the Active frequency list + T_MOBILE_ALLOCATION freq_list; + T_MOBILE_ALLOCATION freq_list_bef_sti; +} +T_MA_INFO; + +/*************************************************************/ +/* Dedicated channel parameter structure... */ +/*************************************************************/ +/* */ +/*************************************************************/ +typedef struct +{ + T_CHANNEL_INFO *achan_ptr; // Ptr to the Active channel (chan1 or chan2) + T_CHANNEL_INFO chan1; + T_CHANNEL_INFO chan2; + + T_MA_INFO ma; + + WORD32 serv_sti_fn; // Chan. desc. change time, serving domain.(-1 for not in use). + WORD32 neig_sti_fn; // Chan. desc. change time, neighbor domain.(-1 for not in use). + + // Frequency redefinition ongoing flag. + //------------------------------------- + UWORD8 freq_redef_flag; // Set to TRUE when a Freq. Redef. must be confirmed. + + // Timing Advance management. + //--------------------------- + UWORD8 timing_advance; // Currently used TA. + UWORD8 new_timing_advance; // New timing advance value to be used on 1st frame + // of the next reporting period. + // TXPWR management. + //------------------- + UWORD8 new_target_txpwr; // New Target value for TXPWR control algo. + + + T_CELL_INFO cell_desc; // Ptr to the new serving cell to download. + + // DAI test mode... DTX allowed... + UWORD8 dai_mode; // Dai test mode. + BOOL dtx_allowed; // DTX allowed (flag). + + // Encryption... + T_ENCRYPTION_KEY ciph_key; + UWORD8 a5mode; + + // For handover... + UWORD8 ho_acc; // Handover access (part of HO reference) + WORD32 ho_acc_to_send; // Set to 4 for SYNC HO and to -1 for ASYNC HO. + UWORD8 t3124; // Timer used in Async. Ho. + + // For DPAGC algorithms purpose + UWORD8 G_all[DPAGC_FIFO_LEN]; + UWORD8 G_DTX[DPAGC_FIFO_LEN]; + #if (AMR == 1) + UWORD8 G_amr[DPAGC_AMR_FIFO_LEN]; + #endif + + #if IDS + // IDS mode configuration + UWORD8 ids_mode; // Information transfert capability coded on 2 bits + // 0: speech + // 1: data service + // 2: fax service + #endif + #if (AMR == 1) + T_AMR_CONFIGURATION amr_configuration; + UWORD8 cmip; + #endif +} +T_DEDIC_SET; + +/*************************************************************/ +/* Dedicated channel parameter structure... */ +/*************************************************************/ +/* */ +/*************************************************************/ +typedef struct +{ + T_DEDIC_SET *aset; // Ptr to the Active parameter set + T_DEDIC_SET *fset; // Ptr to the Free parameter set + T_DEDIC_SET set[2]; // Table of parameter set + + T_MPHC_CHANNEL_MODE_MODIFY_REQ mode_modif; // New mode for a given subchannel. + WORD32 SignalCode; // Message name, set when a new param. set is given + +#if (FF_L1_TCH_VOCODER_CONTROL == 1) + UWORD8 reset_sacch; // Flag to control SACCH reset (set during CHAN ASSIGN and Hand-overs) + UWORD8 vocoder_on; // Flag to control execution of vocoder + UWORD8 start_vocoder; // Flag to trigger start of vocoder (vocoder must be started with a synchro start) +#endif + + UWORD8 sync_tch; // Flag used to synchronize TCH/F or TCH/H. + UWORD8 reset_facch; // Flag used to reset FACCH buffer header on new IAS/CAS/handover + UWORD8 stop_tch; // Flag used to stop TCH/F or TCH/H (VEGA pwrdown). + + UWORD16 radio_freq; // ARFCN buffer (returned by hopping algo). + UWORD16 radio_freq_d; // 1 frame delayed ARFCN. + UWORD16 radio_freq_dd; // 2 frames delayed ARFCN. + + BOOL pwrc; // Flag used to reject serving pwr meas. on beacon. + + BOOL handover_fail_mode; // Flag used to indicate that the L1 wait for an handover fail request + #if (AMR == 1) + BOOL sync_amr; // Flag used to tell to the DSP that a new AMR paramters is ready in the NDB. + #endif +} +T_DEDIC_PARAM; + +/*************************************************************/ +/* Power Management structure... */ +/*************************************************************/ +typedef struct +{ + // fields of TST_SLEEP_REQ primitive .... + UWORD8 mode_authorized; // NONE,SMALL,BIG,DEEP,ALL + UWORD32 clocks; // clocks disabled in Big sleep + + // 32 Khz gauging .... + UWORD8 gauging_task; // ACTIVE, INACTIVE,WAIT-IQ + UWORD8 gaug_duration; // gauging task duration + UWORD8 gaug_count; // gauging task duration compteur + UWORD32 histo[SIZE_HIST][2];// gauging histogram + UWORD8 enough_gaug; // enough good gauging + UWORD8 paging_scheduled; // first Paging Frame + + // flags and variables for wake-up .... + UWORD8 Os_ticks_required; // TRUE : Os ticks to recover + UWORD8 frame_adjust; // TRUE : adjust 1 frame + UWORD32 sleep_duration; // sleep duration computed at wakeup + + // flag for sleep .... + UWORD8 sleep_performed; // NONE,SMALL,BIG,DEEP,ALL + + // status of clocks modules .... + UWORD32 modules_status; // modules clocks status + + // constantes for 32Khz filtering + UWORD32 c_clk_min; // INIT state + UWORD32 c_clk_init_min; // INIT state + UWORD32 c_clk_max; // INIT state + UWORD32 c_clk_init_max; // INIT state + UWORD32 c_delta_hf_acquis; // ACQUIS state + UWORD32 c_delta_hf_update; // UPDATE state + + // trace gauging parameters + UWORD8 state; // state of the gauging + UWORD32 lf; // Number of the 32KHz + UWORD32 hf; // HF: nb_hf( Number of the 13MHz *6 ) + UWORD32 root; // root & frac: the ratio of the HF & LF in each state. + UWORD32 frac; + +} +T_POWER_MNGT; + +/*************************************************************/ +/* code version structure... */ +/*************************************************************/ +typedef struct +{ + // DSP versions & checksum + UWORD16 dsp_code_version; + UWORD16 dsp_patch_version; + UWORD16 dsp_checksum; // DSP checksum : patch+code + + // MCU versions + UWORD16 mcu_tcs_program_release; + UWORD16 mcu_tcs_official; + UWORD16 mcu_tcs_internal; + UWORD16 mcu_tm_version; +} +T_VERSION; + +#if L1_RECOVERY + typedef struct + { + UWORD32 frame_count; + } + T_L1S_RECOVER; +#endif + +/***************************************************************************************/ +/* L1S global variable structure... */ +/***************************************************************************************/ +typedef struct +{ + //++++++++++++++++++++ + // Power Management... + //++++++++++++++++++++ + + T_POWER_MNGT pw_mgr; // data base for power management + + // Time for debug & Simulation purpose... + // -> used as base time for BTS simulation. + //----------------------------------------- + UWORD32 debug_time; // time counter used by L3 scenario... + + // L1S Tasks management... + //----------------------------------------- + T_TASK_STATUS task_status[NBR_DL_L1S_TASKS]; // ...in L1S, scheduler. + UWORD8 frame_count; // ...nb frames to go. + UWORD8 forbid_meas; // ...frames where meas. ctrl is not allowed. + + // MFTAB management variables... + //----------------------------------------- + UWORD8 afrm; // active frame ID. + T_MFTAB FAR mftab; // Multiframe table. + + // Control parameters... + //----------------------------------------- + UWORD32 afc_frame_count; // AFC, Frame count between 2 calls to afc control function. + WORD16 afc; // AFC, Common Frequency controle. + WORD16 toa_shift; // TOA, value used to update the TOA + UWORD8 toa_snr_mask; // TOA, mask counter to reject TOA/SNR results. + + UWORD16 toa_period_count; // TOA frame period used in PACKET TRANSFER MODE + BOOL toa_update; // TOA, is set at the end of the update period, toa update occurs on next valid frame + + // Flag registers for RF task controle... + //----------------------------------------- + // Made these control registers short's as more than 8-bits required. + UWORD16 tpu_ctrl_reg; // (x,x,x,x,SYNC,RX,TX,MS) RX/TX/MS/SYNC bit ON whenever an + // according "controle" has been setup in the current frame. + UWORD16 dsp_ctrl_reg; // (x,x,x,x,x,RX,TX,MS) RX/TX/MS bit ON whenever an + // according "controle" has been setup in the current frame. + + //+++++++++++++++++++ + // Serving... + //+++++++++++++++++++ + + // Serving frame number management. + //--------------------------------- + T_TIME_INFO actual_time; // Time info: current FN, T1, T2, T3... + T_TIME_INFO next_time; // Time info: next FN, T1, T2, T3... + T_TIME_INFO next_plus_time; // Time info: next FN, T1, T2, T3... + + // TXPWR management. + //------------------- + UWORD8 reported_txpwr; // Reported value for TXPWR. + UWORD8 applied_txpwr; // Current value for TXPWR. + + // Last RXQUAL value. + //------------------- + UWORD8 rxqual; // last rxqual value. + + // Hardware info. + //--------------- + UWORD32 tpu_offset; // Current TPU offset register value safeguard. + UWORD32 tpu_offset_hw; // Current TPU offset register value copied in the TPU. + UWORD16 tpu_win; // tpu window identifier inside a TDMA. + + // code versions + T_VERSION version; + + #if (L1_GTT == 1) + UWORD8 tty_state; // state for L1S GTT manager. + #if L2_L3_SIMUL + // GTT test + T_GTT_TEST_L1S gtt_test; + #endif + #endif + + #if (L1_DYN_DSP_DWNLD == 1) + UWORD8 dyn_dwnld_state; // state for L1S DYN DWNLD manager + #endif + #if (AUDIO_TASK == 1) + // Audio task. + //----------------------------------------- + BOOL l1_audio_it_com; // Flag to enable the ITCOM. + UWORD8 audio_state[NBR_AUDIO_MANAGER]; // state for L1S audio manager. + #if (MELODY_E1) + T_L1S_MELODY_TASK melody0; + T_L1S_MELODY_TASK melody1; + #endif + #if (VOICE_MEMO) + T_L1S_VM_TASK voicememo; + #endif + #if (L1_VOICE_MEMO_AMR) + T_L1S_VM_AMR_TASK voicememo_amr; + #endif + #if (SPEECH_RECO) + T_L1S_SR_TASK speechreco; + #endif + #if (AEC) + T_L1S_AEC_TASK aec; + #endif + #if (MELODY_E2) + T_L1S_MELODY_E2_COMMON_VAR melody_e2; + T_L1S_MELODY_E2_TASK melody0_e2; + T_L1S_MELODY_E2_TASK melody1_e2; + #endif + #endif + + UWORD8 last_used_txpwr; + + #if L1_GPRS + BOOL ctrl_synch_before; //control of synchro for CCCH reading en TN-2 + #endif + + #if L1_RECOVERY + T_L1S_RECOVER recovery; + #endif + BOOL spurious_fb_detected; + + // Handling DTX mode + BOOL dtx_ul_on; + WORD8 facch_bursts; + + // DTX mode in AMR + BOOL dtx_amr_dl_on; // set to TRUE when the AMR is in DTX mode in downlink + +} +T_L1S_GLOBAL; + +/***************************************************************************************/ +/* L1A global variable structure... */ +/***************************************************************************************/ +typedef struct +{ + // State for L1A state machines... + //----------------------------------------- + UWORD8 state[NBR_L1A_PROCESSES]; + + // Measurement tasks management... + //----------------------------------------- + UWORD32 l1a_en_meas[NBR_L1A_PROCESSES]; + + // Flag for forward/delete message management. + //--------------------------------------------- + UWORD8 l1_msg_forwarded; + +#if (L1_DYN_DSP_DWNLD == 1) + // Dynamic donload global variables + T_L1A_DYN_DWNLD_GLOBAL dyn_dwnld; +#endif + + // signal code indicating the reason of L1C_DEDIC_DONE + UWORD32 confirm_SignalCode; + + // Trace the best frequencies reported in MPHC_RXLEV_IND +#if (L1_MPHC_RXLEV_IND_REPORT_SORT==1) + UWORD16 tab_index[MAX_MEAS_RXLEV_IND_TRACE]; + UWORD16 max_report; //max number of fq reported, can be < MAX_MEAS_RXLEV_IND_TRACE if list is smaller +#endif +} +T_L1A_GLOBAL; + +/***************************************************************************************/ +/* L1A -> L1S communication structure... */ +/***************************************************************************************/ +typedef struct +{ + //+++++++++++++++++++ + // Serving Cell... + //+++++++++++++++++++ + + // Serving Cell identity and information. + //--------------------------------------- + T_CELL_INFO Scell_info; + T_SMEAS Smeas_dedic; + + UWORD8 Scell_IL_for_rxlev; + T_INPUT_LEVEL Scell_used_IL; + T_INPUT_LEVEL Scell_used_IL_d; + T_INPUT_LEVEL Scell_used_IL_dd; + + T_BCCHS nbcchs; + T_BCCHS ebcchs; + + // Synchro information. + //--------------------------------------- + WORD8 tn_difference; // Timeslot difference for next synchro. + UWORD8 dl_tn; // Current timeslot for downlink stuffs. + #if L1_GPRS + UWORD8 dsp_scheduler_mode; // DSP Scheduler mode (GPRS or GSM). + #endif + + // Idle parameters. + //----------------- + BOOL bcch_combined; // BS_CCCH_SDCCH_COMB flag. + UWORD8 bs_pa_mfrms; // BS_PA_MFRMS parameter. + UWORD8 bs_ag_blks_res; // BS_AG_BLKS_RES parameter. + UWORD8 ccch_group; // CCCH_GROUP parameter. + UWORD8 page_group; // PAGING_GROUP parameter. + UWORD8 page_block_index; // Paging block index paramter. + T_IDLE_TASK_INFO idle_task_info; // Idle task positions... + UWORD8 nb_pch_per_mf51; // nbr paging blocks per mf51. + + // CBCH parameters. + // ---------------- + UWORD32 offset_tn0; // TPU offset for TN=0 (used for SMSCB only). + T_CHANNEL_DESCRIPTION cbch_desc; // CBCH (SMSCB) channel description. + T_MOBILE_ALLOCATION cbch_freq_list; // CBCH frequency list (hopping freq list). + UWORD32 mf51_fn; // Starting FN (for CBCH reading. + UWORD8 cbch_start_in_mf51; // Starting position of CBCH in the MF51. + T_CBCH_HEAD_SCHEDULE norm_cbch_schedule; // Normal CBCH scheduling structure. + T_CBCH_HEAD_SCHEDULE ext_cbch_schedule; // Extended CBCH scheduling structure. + T_CBCH_INFO_SCHEDULE cbch_info_req; + BOOL pre_scheduled_cbch; // CBCH task has to be scheduled 1 FN in advance + BOOL change_synchro_cbch;// A Pseudo Synchro is needed to read CBCH block + UWORD8 tn_smscb; // CBCH TN taking into account new Synchro + + // Random Access information. + // ---------------------------- + T_RA_TASK_INFO ra_info; + + // ADC management. + //------------------- + UWORD16 adc_mode; + UWORD8 adc_idle_period; + UWORD8 adc_traffic_period; + UWORD8 adc_cpt; + + // TXPWR management. + //------------------- + UWORD8 powerclass_band1; // Power class for the MS, given in ACCESS LINK mode (GSM Band). + UWORD8 powerclass_band2; // Power class for the MS, given in ACCESS LINK mode (DCS Band). + + // Dedicated parameters. + //---------------------- + T_DEDIC_PARAM dedic_set; // Dedicated channel parameters. + + //+++++++++++++++++++ + // Neighbour Cells... + //+++++++++++++++++++ + + T_BCCHN_LIST bcchn; + T_NSYNC_LIST nsync; + + // BA list / FULL list. + //--------------------- + T_BA_LIST ba_list; + T_FULL_LIST full_list; + T_FULL_LIST_MEAS *full_list_ptr; + + //+++++++++++++++++++ + // L1S scheduler... + //+++++++++++++++++++ + + // L1S tasks management... + //----------------------------------------- + BOOL task_param[NBR_DL_L1S_TASKS]; // ...synchro semaphores. + BOOL l1s_en_task[NBR_DL_L1S_TASKS]; // ...enable register. + UWORD32 time_to_next_l1s_task; // time to wait to reach starting frame of next task. + UWORD8 l1a_activity_flag; // Activity flag. + + // Measurement tasks management... + //----------------------------------------- + UWORD32 meas_param; // Synchro semaphore bit register. + UWORD32 l1s_en_meas; // Enable task bit register. + + // L1 mode... + //----------------------------------------- + UWORD32 mode; // functional mode: CS_MODE, I_MODE... + + //++++++++++++++++++++++++ + // Controle parameters... + //++++++++++++++++++++++++ + UWORD32 fb_mode; // Mode for fb detection algorithm. + UWORD8 toa_reset; // Flag for TOA algo. reset. + + // Input level memory for AGC management. + //--------------------------------------- + T_INPUT_LEVEL last_input_level[NBMAX_CARRIER+1]; + + BOOL recovery_flag; // in case of the system is down and needs to be recovered + + //++++++++++++++++++++++++ + // Audio task... + //++++++++++++++++++++++++ + #if (AUDIO_TASK == 1) + #if (KEYBEEP) + T_KEYBEEP_TASK keybeep_task; + #endif + #if (TONE) + T_TONE_TASK tone_task; + #endif + #if (MELODY_E1) + T_MELODY_TASK melody0_task; + T_MELODY_TASK melody1_task; + #endif + #if (VOICE_MEMO) + T_VM_TASK voicememo_task; + #endif + #if (L1_VOICE_MEMO_AMR) + T_VM_AMR_TASK voicememo_amr_task; + #endif + #if (SPEECH_RECO) + T_SR_TASK speechreco_task; + #endif + #if (AEC) + T_AEC_TASK aec_task; + #endif + #if (FIR) + T_FIR_TASK fir_task; + #endif + #if (AUDIO_MODE) + T_AUDIO_MODE_TASK audio_mode_task; + #endif + #if (MELODY_E2) + T_MELODY_E2_TASK melody0_e2_task; + T_MELODY_E2_TASK melody1_e2_task; + #endif + #if (L1_CPORT == 1) + T_CPORT_TASK cport_task; + #endif + #endif + + //+++++++++++++ + // GTT task + //+++++++++++++ + + #if (L1_GTT == 1) + T_GTT_TASK gtt_task; + #endif + + // Dynamic DSP download task + #if (L1_DYN_DSP_DWNLD == 1) + T_DYN_DWNLD_TASK_COMMAND dyn_dwnld_task; + #endif + +} +T_L1A_L1S_COM; + +/***************************************************************************************/ +/* L1A -> DSP communication structure... */ +/***************************************************************************************/ +typedef struct +{ + UWORD8 dsp_w_page; // Active page for ARM "writting" to DSP {0,1}. + UWORD8 dsp_r_page; // Active page for ARM "reading" from DSP {0,1}. + UWORD8 dsp_r_page_used; // Used in "l1_synch" to know if the read page must be chged. + + T_DB_DSP_TO_MCU *dsp_db_r_ptr; // MCU<->DSP comm. read page (Double Buffered comm. memory). + T_DB_MCU_TO_DSP *dsp_db_w_ptr; // MCU<->DSP comm. write page (Double Buffered comm. memory). + T_NDB_MCU_DSP *dsp_ndb_ptr; // MCU<->DSP comm. read/write (Non Double Buffered comm. memory). + + T_PARAM_MCU_DSP *dsp_param_ptr; // MCU<->DSP comm. read/write (Param comm. memory). + + #if (DSP_DEBUG_TRACE_ENABLE == 1) + T_DB2_DSP_TO_MCU *dsp_db2_current_r_ptr; + T_DB2_DSP_TO_MCU *dsp_db2_other_r_ptr; + #endif +} +T_L1S_DSP_COM; + +/***************************************************************************************/ +/* L1A -> TPU communication structure... */ +/***************************************************************************************/ +typedef struct +{ + UWORD8 tpu_w_page; // Active page for ARM "writting" to TPU {0,1}. + UWORD32 *tpu_page_ptr; // Current Pointer within the active "tpu_page". + #if (CODE_VERSION == SIMULATION) + T_reg_cmd *reg_cmd; // command register for TPU & DSP enabling and pages pgmation + #else + UWORD16 *reg_cmd; // command register for TPU & DSP enabling and pages pgmation + #endif + UWORD32 *reg_com_int; // communication int. register + UWORD32 *offset; // offset register +} +T_L1S_TPU_COM; + +/***************************************************************************************/ +/* L1 configuration structure */ +/***************************************************************************************/ + +typedef struct +{ + UWORD8 id; //standard identifier + + + + UWORD16 radio_band_support; + + + UWORD8 swap_iq_band1; + UWORD8 swap_iq_band2; + + UWORD32 first_radio_freq; + UWORD32 first_radio_freq_band2; + UWORD32 radio_freq_index_offset; + UWORD32 nbmax_carrier; + UWORD32 nbmeas; + UWORD32 max_txpwr_band1; + UWORD32 max_txpwr_band2; + UWORD32 txpwr_turning_point; + + UWORD16 cal_freq1_band1; + UWORD16 cal_freq1_band2; + UWORD16 g_magic_band1; + UWORD16 g_magic_band2; + UWORD16 lna_att_band1; + UWORD16 lna_att_band2; + UWORD16 lna_switch_thr_low_band1; + UWORD16 lna_switch_thr_low_band2; + UWORD16 lna_switch_thr_high_band1; + UWORD16 lna_switch_thr_high_band2; +} +T_L1_STD_CNFG; + +//RF dependent parameter definitions +typedef struct +{ + UWORD16 rx_synth_setup_time; + UWORD8 rx_synth_load_split; + WORD16 rx_synth_start_time; + WORD16 rx_change_offset_time; + WORD16 rx_change_synchro_time; + UWORD8 rx_tpu_scenario_ending; + + UWORD16 tx_synth_setup_time; + UWORD8 tx_synth_load_split; + WORD16 tx_synth_start_time; + WORD16 tx_change_offset_time; + WORD16 tx_nb_duration; + WORD16 tx_ra_duration; + UWORD8 tx_nb_load_split; + UWORD8 tx_ra_load_split; + UWORD8 tx_tpu_scenario_ending; + + WORD16 fb26_anchoring_time; + WORD16 fb26_change_offset_time; + + UWORD32 prg_tx_gsm; + UWORD32 prg_tx_dcs; + + UWORD16 low_agc_noise_thr; + UWORD16 high_agc_sat_thr; + + UWORD16 low_agc; + UWORD16 high_agc; + + UWORD16 il_min; + + UWORD16 fixed_txpwr; + WORD16 eeprom_afc; + WORD8 setup_afc_and_rf; + + UWORD32 psi_sta_inv; + UWORD32 psi_st; + UWORD32 psi_st_32; + UWORD32 psi_st_inv; + + #if (VCXO_ALGO==1) + WORD16 afc_dac_center; + WORD16 afc_dac_min; + WORD16 afc_dac_max; + WORD16 afc_snr_thr; + UWORD8 afc_algo; + UWORD8 afc_win_avg_size_M; + UWORD8 rgap_algo; + UWORD8 rgap_bad_snr_count_B; + #endif + + UWORD8 guard_bits; + + #if DCO_ALGO + BOOL dco_enabled; + #endif + + #if (ANLG_FAM == 1) + UWORD16 debug1; + UWORD16 afcctladd; + UWORD16 vbuctrl; + UWORD16 vbdctrl; + UWORD16 bbctrl; + UWORD16 apcoff; + UWORD16 bulioff; + UWORD16 bulqoff; + UWORD16 dai_onoff; + UWORD16 auxdac; + UWORD16 vbctrl; + UWORD16 apcdel1; + #endif + #if (ANLG_FAM == 2) + UWORD16 debug1; + UWORD16 afcctladd; + UWORD16 vbuctrl; + UWORD16 vbdctrl; + UWORD16 bbctrl; + UWORD16 bulgcal; + UWORD16 apcoff; + UWORD16 bulioff; + UWORD16 bulqoff; + UWORD16 dai_onoff; + UWORD16 auxdac; + UWORD16 vbctrl1; + UWORD16 vbctrl2; + UWORD16 apcdel1; + UWORD16 apcdel2; + #endif + #if (ANLG_FAM == 3) + UWORD16 debug1; + UWORD16 afcctladd; + UWORD16 vbuctrl; + UWORD16 vbdctrl; + UWORD16 bbctrl; + UWORD16 bulgcal; + UWORD16 apcoff; + UWORD16 bulioff; + UWORD16 bulqoff; + UWORD16 dai_onoff; + UWORD16 auxdac; + UWORD16 vbctrl1; + UWORD16 vbctrl2; + UWORD16 apcdel1; + UWORD16 apcdel2; + UWORD16 vbpop; + UWORD16 vau_delay_init; + UWORD16 vaud_cfg; + UWORD16 vauo_onoff; + UWORD16 vaus_vol; + UWORD16 vaud_pll; + #endif + + #if L1_GPRS + UWORD16 toa_pm_thres; // PM threshold for TOA algorithm feeding in packet transfer mode + #endif +} +T_L1_PARAMS; + +typedef struct +{ + T_L1_STD_CNFG std; //standard: GSM,GSM_E,GSM850,DCS,PCS,DUAL,DUALEXT + UWORD8 pwr_mngt; //power management active + UWORD8 tx_pwr_code; + UWORD16 dwnld; + T_L1_PARAMS params; + double dpll; //dpll factor + + #if TESTMODE + //Define the TestMode flag and TestMode parameters + UWORD8 TestMode; + + UWORD8 agc_enable; + UWORD8 afc_enable; + UWORD8 adc_enable; + + T_TM_PARAMS tmode; //TestMode parameters structure + #endif + +} +T_L1_CONFIG; + +/***************************************************************************************/ +/* API HISR -> L1A communication structure... Defined in case dynamic download is defined */ +/***************************************************************************************/ +/***************************************************************************************/ +/* Global API HISR -Defined in case dynamic download is defined +/***************************************************************************************/ + + +#if(L1_DYN_DSP_DWNLD==1) +typedef struct +{ + T_L1A_DYN_DWNLD_HISR_COM dyn_dwnld; +} T_L1A_API_HISR_COM; + +typedef struct +{ + T_L1_DYN_DWNLD_API_HISR dyn_dwnld; +} T_L1_API_HISR; +#endif