--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cdg3/cdginc-conservative/p_uart.val	Tue Sep 27 16:27:34 2016 +0000
@@ -0,0 +1,249 @@
+/*
++--------------------------------------------------------------------------+
+| PROJECT : PROTOCOL STACK                                                 |
+| FILE    : p_uart.val                                                     |
+| SOURCE  : "sap\uart.pdf"                                                 |
+| LastModified : "2002-03-11"                                              |
+| IdAndVersion : "8441.117.99.014"                                         |
+| SrcFileTime  : "Thu Nov 29 09:56:02 2007"                                |
+| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014                   |
+|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
++--------------------------------------------------------------------------+
+*/
+
+/* PRAGMAS
+ * PREFIX                 : NONE
+ * COMPATIBILITY_DEFINES  : NO (require PREFIX)
+ * ALWAYS_ENUM_IN_VAL_FILE: NO
+ * ENABLE_GROUP: NO
+ * CAPITALIZE_TYPENAME: NO
+ */
+
+
+#ifndef P_UART_VAL
+#define P_UART_VAL
+
+
+#define CDG_ENTER__P_UART_VAL
+
+#define CDG_ENTER__FILENAME _P_UART_VAL
+#define CDG_ENTER__P_UART_VAL__FILE_TYPE CDGINC
+#define CDG_ENTER__P_UART_VAL__LAST_MODIFIED _2002_03_11
+#define CDG_ENTER__P_UART_VAL__ID_AND_VERSION _8441_117_99_014
+
+#define CDG_ENTER__P_UART_VAL__SRC_FILE_TIME _Thu_Nov_29_09_56_02_2007
+
+#include "CDG_ENTER.h"
+
+#undef CDG_ENTER__P_UART_VAL
+
+#undef CDG_ENTER__FILENAME
+
+
+/*
+ * Value constants for VAL_esc_valid
+ */
+#define UART_IO_ESC_UNDEF              (0x0)      /* values for escape sequence detection remain unchanged */
+#define UART_IO_ESC_VALID              (0x1)      /* values for escape sequence detection are valid */
+
+/*
+ * Value constants for VAL_xoff
+ */
+#define UART_IO_XOFF_DEFAULT           (0x13)     /* default value for XOff character */
+
+/*
+ * Value constants for VAL_xon
+ */
+#define UART_IO_XON_DEFAULT            (0x11)     /* default value for XOn character */
+
+/*
+ * Value constants for VAL_parity
+ */
+#define UART_IO_PA_UNDEF               (0xff)     /* parity remain unchanged        */
+#define UART_IO_PA_NONE                (0x0)      /* no parity and no space         */
+#define UART_IO_PA_EVEN                (0x1)      /* even parity                    */
+#define UART_IO_PA_ODD                 (0x2)      /* odd parity                     */
+#define UART_IO_PA_SPACE               (0x3)      /* no parity but space            */
+
+/*
+ * Value constants for VAL_flow_tx
+ */
+#define UART_IO_FC_TX_UNDEF            (0xff)     /* TX flow control mode remain unchanged */
+#define UART_IO_FC_TX_NONE             (0x0)      /* no TX flow control             */
+#define UART_IO_FC_TX_RTS              (0x1)      /* RTS/CTS flow control           */
+#define UART_IO_FC_TX_XOFF             (0x2)      /* XON/XOFF flow control          */
+
+/*
+ * Value constants for VAL_esc_char
+ */
+#define UART_IO_ESC_CHAR_DEFAULT       (0x2b)     /* default value for escape character ('+') */
+
+/*
+ * Value constants for VAL_flow_rx
+ */
+#define UART_IO_FC_RX_UNDEF            (0xff)     /* RX flow control mode remain unchanged */
+#define UART_IO_FC_RX_NONE             (0x0)      /* no RX flow control             */
+#define UART_IO_FC_RX_RTS              (0x1)      /* RTS/CTS flow control           */
+#define UART_IO_FC_RX_XOFF             (0x2)      /* XON/XOFF flow control          */
+
+/*
+ * Value constants for VAL_nsb
+ */
+#define UART_IO_SB_UNDEF               (0xff)     /* stop bits remain unchanged     */
+#define UART_IO_SB_1                   (0x1)      /* one stop bit                   */
+#define UART_IO_SB_2                   (0x2)      /* two stop bits                  */
+
+/*
+ * Value constants for VAL_speed
+ */
+#define UART_IO_SPEED_UNDEF            (0xff)     /* baud rate remain unchanged     */
+#define UART_IO_SPEED_AUTO             (0x0)      /* auto detection of baud rate    */
+#define UART_IO_SPEED_75               (0x1)      /* baud rate of 75 bits per second */
+#define UART_IO_SPEED_150              (0x2)      /* baud rate of 150 bits per second */
+#define UART_IO_SPEED_300              (0x3)      /* baud rate of 300 bits per second */
+#define UART_IO_SPEED_600              (0x4)      /* baud rate of 600 bits per second */
+#define UART_IO_SPEED_1200             (0x5)      /* baud rate of 1200 bits per second */
+#define UART_IO_SPEED_2400             (0x6)      /* baud rate of 2400 bits per second */
+#define UART_IO_SPEED_4800             (0x7)      /* baud rate of 4800 bits per second */
+#define UART_IO_SPEED_7200             (0x8)      /* baud rate of 7200 bits per second */
+#define UART_IO_SPEED_9600             (0x9)      /* baud rate of 9600 bits per second */
+#define UART_IO_SPEED_14400            (0xa)      /* baud rate of 14400 bits per second */
+#define UART_IO_SPEED_19200            (0xb)      /* baud rate of 19200 bits per second */
+#define UART_IO_SPEED_28800            (0xc)      /* baud rate of 28800 bits per second */
+#define UART_IO_SPEED_33900            (0xd)      /* baud rate of 33900 bits per second */
+#define UART_IO_SPEED_38400            (0xe)      /* baud rate of 38400 bits per second */
+#define UART_IO_SPEED_57600            (0xf)      /* baud rate of 57600 bits per second */
+#define UART_IO_SPEED_115200           (0x10)     /* baud rate of 115200 bits per second */
+#define UART_IO_SPEED_203125           (0x11)     /* baud rate of 203125 bits per second */
+#define UART_IO_SPEED_406250           (0x12)     /* baud rate of 406250 bits per second */
+#define UART_IO_SPEED_812500           (0x13)     /* baud rate of 812500 bits per second */
+
+/*
+ * Value constants for VAL_esc_gp
+ */
+#define UART_IO_ESC_GP_DEFAULT         (0x3e8)    /* default value for guard period (1000 ms) */
+#define UART_IO_ESC_OFF                (0x0)      /* no escape sequence detection   */
+
+/*
+ * Value constants for VAL_xoff_valid
+ */
+#define UART_IO_XOFF_UNDEF             (0x0)      /* XOff character remain unchanged */
+#define UART_IO_XOFF_VALID             (0x1)      /* XOff character valid           */
+
+/*
+ * Value constants for VAL_xon_valid
+ */
+#define UART_IO_XON_UNDEF              (0x0)      /* XOn character remain unchanged */
+#define UART_IO_XON_VALID              (0x1)      /* XOn character valid            */
+
+/*
+ * Value constants for VAL_bpc
+ */
+#define UART_IO_BPC_UNDEF              (0xff)     /* bits per character remain unchanged */
+#define UART_IO_BPC_7                  (0x7)      /* 7 bits per character           */
+#define UART_IO_BPC_8                  (0x8)      /* 8 bits per character           */
+
+/*
+ * Value constants for VAL_dti_conn
+ */
+#define UART_CONNECT_DTI               (0x0)      /* Connect DTI to UART            */
+#define UART_DISCONNECT_DTI            (0x1)      /* Disconnect DTI from UART       */
+
+/*
+ * Value constants for VAL_line_state
+ */
+#define UART_LINE_ON                   (0x0)      /* activate line                  */
+#define UART_LINE_OFF                  (0x1)      /* deactivate line                */
+
+/*
+ * Value constants for VAL_detection
+ */
+#define UART_ESC_DETECTION_OFF         (0x0)      /* turn off escape sequence detection */
+#define UART_ESC_DETECTION_ON          (0x1)      /* turn on escape sequence detection */
+
+/*
+ * Value constants for VAL_cause
+ */
+#define UART_DETECT_ESC                (0x1)      /* escape sequence detected       */
+#define UART_DETECT_DTR                (0x2)      /* DTR line of serial link drops  */
+
+/*
+ * Value constants for VAL_error
+ */
+#define UART_ERROR_NO_CHANNEL          (0x8)      /* can not open VSI communication channel */
+#define UART_ERROR_MUX_ESTABLISH_FAIL  (0x9)      /* establishment of multiplexer operation fails */
+#define UART_ERROR_MUX_NO_RESPONSE     (0xa)      /* no response from TE multiplexer */
+
+/*
+ * Value constants for VAL_mode
+ */
+#define UART_MUX_MODE_BASIC            (0x0)      /* basic option                   */
+#define UART_MUX_MODE_ADVANCED         (0x1)      /* advanced option                */
+
+/*
+ * Value constants for VAL_frame_type
+ */
+#define UART_MUX_FRAME_UIH             (0x0)      /* UIH frames used only           */
+#define UART_MUX_FRAME_UI              (0x1)      /* UI frames used only            */
+#define UART_MUX_FRAME_I               (0x2)      /* I frames used only             */
+#define UART_MUX_FRAME_DEFAULT         (0x0)      /* default value                  */
+
+/*
+ * Value constants for VAL_n1
+ */
+#define UART_MUX_N1_BASIC_DEFAULT      (0x1f)     /* default value for the basic option */
+#define UART_MUX_N1_ADVANCED_DEFAULT   (0x40)     /* default value for the advanced option */
+
+/*
+ * Value constants for VAL_t1
+ */
+#define UART_MUX_T1_DEFAULT            (0xa)      /* default value (100 ms)         */
+
+/*
+ * Value constants for VAL_n2
+ */
+#define UART_MUX_N2_DEFAULT            (0x3)      /* default value                  */
+
+/*
+ * Value constants for VAL_t2
+ */
+#define UART_MUX_T2_DEFAULT            (0x1e)     /* default value (300 ms)         */
+
+/*
+ * Value constants for VAL_t3
+ */
+#define UART_MUX_T3_DEFAULT            (0xa)      /* default value (10 seconds)     */
+
+/*
+ * Value constants for VAL_convergence
+ */
+#define UART_MUX_CONVERGENCE_UOS       (0x1)      /* unstructed octet stream        */
+#define UART_MUX_CONVERGENCE_UOSV24    (0x2)      /* unstructed octet stream with transmission of V.24 signal states */
+#define UART_MUX_CONVERGENCE_UFD       (0x3)      /* uninterruptible framed data    */
+#define UART_MUX_CONVERGENCE_IFD       (0x4)      /* interruptible framed data      */
+#define UART_MUX_CONVERGENCE_DEFAULT   (0x1)      /* default value                  */
+
+/*
+ * Value constants for VAL_service
+ */
+#define UART_MUX_SERVICE_AT            (0x0)      /* AT command mode                */
+#define UART_MUX_SERVICE_DATA          (0x1)      /* data service                   */
+#define UART_MUX_SERVICE_VOICE_0621    (0x2)      /* voice service (coded - GSM 06.21) */
+#define UART_MUX_SERVICE_VOICE_PCM64U  (0x3)      /* voice service (coded - PCM 64 kbits/s U-law) */
+#define UART_MUX_SERVICE_VOICE_ADPCM   (0x4)      /* voice service (coded - ADPCM 32 kbits/s) */
+#define UART_MUX_SERVICE_VOICE_PCM64A  (0x5)      /* voice service (coded - PCM 64 kbits/s A-law) */
+#define UART_MUX_SERVICE_VOICE_PCM128  (0x6)      /* voice service (coded - PCM 128 kbits/s) */
+#define UART_MUX_SERVICE_GPRS          (0x7)      /* GPRS data                      */
+#define UART_MUX_SERVICE_CS            (0x8)      /* Circuit-Switched data          */
+#define UART_MUX_SERVICE_TRACE         (0x9)      /* Trace / Debug output           */
+#define UART_MUX_SERVICE_DEFAULT       (0x0)      /* default value                  */
+
+/*
+ * user defined constants
+ */
+#define UART_DLCI_NOT_MULTIPLEXED      (0x0)      
+
+#include "CDG_LEAVE.h"
+
+
+#endif