--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cdg-hybrid/cdginc/p_pkt.val	Fri Oct 14 21:52:58 2016 +0000
@@ -0,0 +1,173 @@
+/*
++--------------------------------------------------------------------------+
+| PROJECT : PROTOCOL STACK                                                 |
+| FILE    : p_pkt.val                                                      |
+| SOURCE  : "sap\pkt.pdf"                                                  |
+| LastModified : "2002-10-17"                                              |
+| IdAndVersion : "8443.105.02.106"                                         |
+| SrcFileTime  : "Thu Nov 29 09:50:46 2007"                                |
+| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
+|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
++--------------------------------------------------------------------------+
+*/
+
+/* PRAGMAS
+ * PREFIX                 : NONE
+ * COMPATIBILITY_DEFINES  : NO (require PREFIX)
+ * ALWAYS_ENUM_IN_VAL_FILE: NO
+ * ENABLE_GROUP: NO
+ * CAPITALIZE_TYPENAME: NO
+ */
+
+
+#ifndef P_PKT_VAL
+#define P_PKT_VAL
+
+
+#define CDG_ENTER__P_PKT_VAL
+
+#define CDG_ENTER__FILENAME _P_PKT_VAL
+#define CDG_ENTER__P_PKT_VAL__FILE_TYPE CDGINC
+#define CDG_ENTER__P_PKT_VAL__LAST_MODIFIED _2002_10_17
+#define CDG_ENTER__P_PKT_VAL__ID_AND_VERSION _8443_105_02_106
+
+#define CDG_ENTER__P_PKT_VAL__SRC_FILE_TIME _Thu_Nov_29_09_50_46_2007
+
+#include "CDG_ENTER.h"
+
+#undef CDG_ENTER__P_PKT_VAL
+
+#undef CDG_ENTER__FILENAME
+
+
+/*
+ * Value constants for VAL_sleep_mode
+ */
+#define DIO_SLEEP_ENABLE               (0x1)      /* Enter sleep mode if possible.  */
+#define DIO_SLEEP_DISABLE              (0x2)      /* Do not enter sleep mode.       */
+
+/*
+ * Value constants for VAL_parity
+ */
+#define DIO_PARITY_NO                  (0x1)      /* Don't send a parity bit.       */
+#define DIO_PARITY_ODD                 (0x2)      /* Send an odd parity bit.        */
+#define DIO_PARITY_EVEN                (0x4)      /* Send an even parity bit.       */
+#define DIO_PARITY_SPACE               (0x8)      /* Send a space for parity bit.   */
+
+/*
+ * Value constants for VAL_flow_control
+ */
+#define DIO_FLOW_NO_NO                 (0x1)      /* No flow control for both directions. */
+#define DIO_FLOW_SW_NO                 (0x2)      /* Software flow control for receive direction and no flow control for transmit direction. */
+#define DIO_FLOW_HW_NO                 (0x4)      /* Hardware flow control for receive direction and no flow control for transmit direction. */
+#define DIO_FLOW_NO_SW                 (0x8)      /* No flow control for receive direction and software flow control for transmit direction. */
+#define DIO_FLOW_SW_SW                 (0x10)     /* Software flow control for both directions. */
+#define DIO_FLOW_HW_SW                 (0x20)     /* Hardware flow control for receive direction and software flow control for transmit direction. */
+#define DIO_FLOW_NO_HW                 (0x40)     /* No flow control for receive direction and hardware flow control for transmit direction. */
+#define DIO_FLOW_SW_HW                 (0x80)     /* Software flow control for receive direction and hardware flow control for transmit direction. */
+#define DIO_FLOW_HW_HW                 (0x100)    /* Hardware flow control for both directions. */
+
+/*
+ * Value constants for VAL_data_mode
+ */
+#define DIO_MODE_AT                    (0x1)      /* The TE will transmit AT commands. */
+#define DIO_MODE_DATA                  (0x2)      /* The TE will transmit data.     */
+#define DIO_MODE_TRACE                 (0x4)      /* The TE expects trace information via this device */
+#define DIO_MODE_DEFAULT               (0x3)      /* Default value if the driver can not provide this information */
+
+/*
+ * Value constants for VAL_stop_bits
+ */
+#define DIO_STOP_1                     (0x1)      /* Send 1 stop bit.               */
+#define DIO_STOP_15                    (0x2)      /* Send 1.5 stop bits.            */
+#define DIO_STOP_2                     (0x4)      /* Send 2 stop bits.              */
+
+/*
+ * Value constants for VAL_baud
+ */
+#define DIO_BAUD_812500                (0x80000)  /* Transmission rate of 812500 bits/sec. */
+#define DIO_BAUD_406250                (0x40000)  /* Transmission rate of 406250 bits/sec. */
+#define DIO_BAUD_203125                (0x20000)  /* Transmission rate of 203125 bits/sec. */
+#define DIO_BAUD_115200                (0x10000)  /* Transmission rate of 115200 bits/sec. */
+#define DIO_BAUD_57600                 (0x8000)   /* Transmission rate of 57600 bits/sec. */
+#define DIO_BAUD_38400                 (0x4000)   /* Transmission rate of 38400 bits/sec. */
+#define DIO_BAUD_33900                 (0x2000)   /* Transmission rate of 33900 bits/sec. */
+#define DIO_BAUD_28800                 (0x1000)   /* Transmission rate of 28800 bits/sec. */
+#define DIO_BAUD_19200                 (0x800)    /* Transmission rate of 19200 bits/sec. */
+#define DIO_BAUD_14400                 (0x400)    /* Transmission rate of 14400 bits/sec. */
+#define DIO_BAUD_9600                  (0x200)    /* Transmission rate of 9600 bits/sec. */
+#define DIO_BAUD_7200                  (0x100)    /* Transmission rate of 7200 bits/sec. */
+#define DIO_BAUD_4800                  (0x80)     /* Transmission rate of 4800 bits/sec. */
+#define DIO_BAUD_2400                  (0x40)     /* Transmission rate of 2400 bits/sec. */
+#define DIO_BAUD_1200                  (0x20)     /* Transmission rate of 1200 bits/sec. */
+#define DIO_BAUD_600                   (0x10)     /* Transmission rate of 600 bits/sec. */
+#define DIO_BAUD_300                   (0x8)      /* Transmission rate of 300 bits/sec. */
+#define DIO_BAUD_150                   (0x4)      /* Transmission rate of 150 bits/sec. */
+#define DIO_BAUD_75                    (0x2)      /* Transmission rate of 75 bits/sec. */
+#define DIO_BAUD_AUTO                  (0x1)      /* Automatic detection.           */
+
+/*
+ * Value constants for VAL_mux_configuration
+ */
+#define DIO_MUX_MODE_BASIC             (0x1)      /* The multiplexer supports Basic option. */
+#define DIO_MUX_MODE_ADVANCED          (0x2)      /* The multiplexer supports Advanced option. */
+#define DIO_MUX_SUBSET_UIH             (0x4)      /* The multiplexer supports UIH frames. */
+#define DIO_MUX_SUBSET_UI              (0x8)      /* The multiplexer supports UI frames. */
+#define DIO_MUX_SUBSET_I               (0x10)     /* The multiplexer supports I frames. */
+
+/*
+ * Value constants for VAL_guard_period
+ */
+#define DIO_ESC_OFF                    (0x0)      /* Turn escape sequence detection off. */
+
+/*
+ * Value constants for VAL_data_bits
+ */
+#define DIO_CHAR_5                     (0x10)     /* Send 5 bits per character.     */
+#define DIO_CHAR_6                     (0x20)     /* Send 6 bits per character.     */
+#define DIO_CHAR_7                     (0x40)     /* Send 7 bits per character.     */
+#define DIO_CHAR_8                     (0x80)     /* Send 8 bits per character.     */
+
+/*
+ * Value constants for VAL_convergence
+ */
+#define DIO_CONV_SER                   (0x1)      /* The device can contain serial data. */
+#define DIO_CONV_PACKET                (0x2)      /* The device can contain packet data. */
+#define DIO_CONV_MUX                   (0x4)      /* The device can start a multiplexer. */
+
+/*
+ * Value constants for VAL_state
+ */
+#define DIO_SA                         (0x80000000)/* read/write, Device ready       */
+#define DIO_SB                         (0x40000000)/* read/write, Data valid         */
+#define DIO_X                          (0x20000000)/* read/write, Flow control       */
+#define DIO_RING                       (0x10000000)/* write, RING indicator          */
+#define DIO_ESC                        (0x8000000)/* read, escape sequence detected */
+#define DIO_DISC                       (0x4000000)/* read, link disconnected        */
+#define DIO_MUX_STOP                   (0x1000000)/* read/write, stop the multiplexer */
+#define DIO_BRK                        (0x2000000)/* read/write, break received / to be sent */
+#define DIO_BRKLEN                     (0xff)     /* read/write, length of the break signal in characters */
+#define DIO_PACKET_UNKNOWN             (0x0)      /* Packet transfer: No packet type available. */
+#define DIO_PACKET_IP                  (0x21)     /* Packet transfer: Simple IP packet */
+#define DIO_PACKET_CTCP                (0x2d)     /* Packet transfer: Van Jacobson compressed TCP/IP header */
+#define DIO_PACKET_UTCP                (0x2f)     /* Packet transfer: Van Jacobson uncompressed TCP/IP header */
+
+/*
+ * Value constants for VAL_cause
+ */
+#define PKTCS_SUCCESS                  (0xd200)   /* 0b11010010 00000000 No error, success */
+#define PKTCS_INVALID_PARAMS           (0xd201)   /* 0b11010010 00000001 Device number invalid */
+#define PKTCS_INVALID_PEER             (0xd202)   /* 0b11010010 00000010 Peer does not exist */
+#define PKTCS_DISCONNECT               (0xd203)   /* 0b11010010 00000011 The driver signalled a DRV_SIGTYPE_DISCONNECT */
+#define PKTCS_INTERNAL_DRV_ERROR       (0xd204)   /* 0b11010010 00000100 A driver function returned DRV_INTERNAL_ERROR */
+
+/*
+ * user defined constants
+ */
+#define DIO_MAX_NAME_LENGTH            (0x10)     
+#define DIO_MAX_DATA_LENGTH            (0x64)     
+
+#include "CDG_LEAVE.h"
+
+
+#endif