diff cdg-hybrid/cdginc/p_t30.val @ 212:e7a67accfad9

cdg-hybrid cdginc headers created
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 14 Oct 2016 21:52:58 +0000
parents
children
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cdg-hybrid/cdginc/p_t30.val	Fri Oct 14 21:52:58 2016 +0000
@@ -0,0 +1,218 @@
+/*
++--------------------------------------------------------------------------+
+| PROJECT : PROTOCOL STACK                                                 |
+| FILE    : p_t30.val                                                      |
+| SOURCE  : "sap\t30.pdf"                                                  |
+| LastModified : "2002-04-23"                                              |
+| IdAndVersion : "8411.104.98.312"                                         |
+| SrcFileTime  : "Thu Nov 29 09:54:28 2007"                                |
+| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
+|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
++--------------------------------------------------------------------------+
+*/
+
+/* PRAGMAS
+ * PREFIX                 : NONE
+ * COMPATIBILITY_DEFINES  : NO (require PREFIX)
+ * ALWAYS_ENUM_IN_VAL_FILE: NO
+ * ENABLE_GROUP: NO
+ * CAPITALIZE_TYPENAME: NO
+ */
+
+
+#ifndef P_T30_VAL
+#define P_T30_VAL
+
+
+#define CDG_ENTER__P_T30_VAL
+
+#define CDG_ENTER__FILENAME _P_T30_VAL
+#define CDG_ENTER__P_T30_VAL__FILE_TYPE CDGINC
+#define CDG_ENTER__P_T30_VAL__LAST_MODIFIED _2002_04_23
+#define CDG_ENTER__P_T30_VAL__ID_AND_VERSION _8411_104_98_312
+
+#define CDG_ENTER__P_T30_VAL__SRC_FILE_TIME _Thu_Nov_29_09_54_28_2007
+
+#include "CDG_ENTER.h"
+
+#undef CDG_ENTER__P_T30_VAL
+
+#undef CDG_ENTER__FILENAME
+
+
+/*
+ * Value constants for VAL_dir
+ */
+#define DIR_SND                        (0x0)      /* send fax data                  */
+#define DIR_RCV                        (0x1)      /* receive fax data               */
+
+/*
+ * Value constants for VAL_sgn
+ */
+#define SGN_OK                         (0x0)      /* OK                             */
+#define SGN_DIS                        (0x1)      /* Digital identification signal  */
+#define SGN_CSI                        (0x2)      /* Called subscriber identification */
+#define SGN_NSF                        (0x4)      /* Non-standard facilities        */
+#define SGN_CFR                        (0x21)     /* Confirmation to receive        */
+#define SGN_FTT                        (0x22)     /* Failure to train               */
+#define SGN_MCF                        (0x31)     /* Message confirmation           */
+#define SGN_RTN                        (0x32)     /* Retrain negative               */
+#define SGN_RTP                        (0x33)     /* Retrain positive               */
+#define SGN_PIN                        (0x34)     /* Procedure interrupt negative   */
+#define SGN_PIP                        (0x35)     /* Procedure interrupt positive   */
+#define SGN_FDM                        (0x3f)     /* File diagnostics message       */
+#define SGN_DCS                        (0x41)     /* Digital command signal         */
+#define SGN_TSI                        (0x42)     /* Transmitting subscriber identification */
+#define SGN_SUB                        (0x43)     /* Subaddress                     */
+#define SGN_NSS                        (0x44)     /* Non-standard set-up            */
+#define SGN_PWDR                       (0x45)     /* Password - receive             */
+#define SGN_TCF                        (0x4f)     /* Training check frame           */
+#define SGN_CRP                        (0x58)     /* Command repeat                 */
+#define SGN_DCN                        (0x5f)     /* Disconnect                     */
+#define SGN_EOM                        (0x71)     /* End of message                 */
+#define SGN_MPS                        (0x72)     /* Multi-page signal              */
+#define SGN_EOP                        (0x74)     /* End of procedure               */
+#define SGN_PRI_EOM                    (0x79)     /* Procedure Interrupt - End Of Message */
+#define SGN_PRI_MPS                    (0x7a)     /* Procedure Interrupt - MultiPage Signal */
+#define SGN_PRI_EOP                    (0x7c)     /* Procedure Interrupt - End Of Procedure */
+#define SGN_DTC                        (0x81)     /* Digital transmit command       */
+#define SGN_CIG                        (0x82)     /* Calling subscriber identification */
+#define SGN_PWDS                       (0x83)     /* Password  - send               */
+#define SGN_NSC                        (0x84)     /* Non-standard facilities command */
+#define SGN_SEP                        (0x85)     /* Selective Polling              */
+#define SGN_FCS_ERR                    (0xf1)     /* FCS error                      */
+#define SGN_NO_RES                     (0xf2)     /* No response                    */
+#define SGN_CONT                       (0xf3)     /* continue                       */
+#define SGN_NOT_USED                   (0xff)     /* Not used                       */
+
+/*
+ * Value constants for VAL_cmpl
+ */
+#define CMPL_EOP                       (0x0)      /* end of procedure               */
+#define CMPL_EOM                       (0x1)      /* end of message                 */
+#define CMPL_PI                        (0x2)      /* procedure interrupt            */
+#define CMPL_DCN                       (0x3)      /* disconnect                     */
+
+/*
+ * Value constants for VAL_cause
+ */
+#define ERR_PH_A_UNSPEC                (0x4d10)   /* unspecified phase A error      */
+#define ERR_PH_A_T1_TIMEOUT            (0x4d11)   /* no answer (T30 T1 timeout)     */
+#define ERR_PH_B_SND_UNSPEC            (0x4d20)   /* unspecified transmit phase B error */
+#define ERR_PH_B_SND_CANT_RCV_OR_SND   (0x4d21)   /* remote cannot receive or send  */
+#define ERR_PH_B_SND_COMREC            (0x4d22)   /* COMREC error in transmit phase B */
+#define ERR_PH_B_SND_COMREC_INVALID_CMD_RCVD (0x4d23)/* COMREC invalid command received */
+#define ERR_PH_B_SND_RSPREC            (0x4d24)   /* RSPREC transmit error phase B  */
+#define ERR_PH_B_SND_DCS_RPTD_3_TIMES  (0x4d25)   /* DCS send three times without response */
+#define ERR_PH_B_SND_DIS_DTC_RCVD_3_TIMES (0x4d26)/* DIS/DTC received 3 times; DCS not recognized */
+#define ERR_PH_B_SND_FTT_2400          (0x4d27)   /* failure to train at 2400 bit/s or +FMS value */
+#define ERR_PH_B_SND_INVALID_RESP_RCVD (0x4d28)   /* invalid respones received      */
+#define ERR_PH_C_SND_UNSPEC            (0x4d40)   /* unspecified transmit phase C error */
+#define ERR_PH_C_SND_UNSPEC_IMAGE_CONV (0x4d41)   /* unspecified image format error */
+#define ERR_PH_C_SND_DTE_TO_DTC_DATA_UNDERFLOW (0x4d43)/* DTE to DTC data underflow      */
+#define ERR_PH_C_SND_UNRECOG_TRANSP_DATA_CMD (0x4d44)/* unrecognized transparent data command */
+#define ERR_PH_C_SND_IMAGE_LINE_LENGTH (0x4d45)   /* image error, line length wrong */
+#define ERR_PH_C_SND_IMAGE_PAGE_LENGTH (0x4d46)   /* image error, page length wrong */
+#define ERR_PH_C_SND_IMAGE_COMPRESSION_MODE (0x4d47)/* image error, compression mode wrong */
+#define ERR_PH_D_SND_UNSPEC            (0x4d50)   /* unspecified transmit phase D error */
+#define ERR_PH_D_SND_RSPREC            (0x4d51)   /* RESPREC transmit error phase D */
+#define ERR_PH_D_SND_MPS_RPTD_3_TIMES  (0x4d52)   /* no response to MPS repeated 3 times */
+#define ERR_PH_D_SND_INVALID_RESP_TO_MPS (0x4d53) /* invalid respones to MPS        */
+#define ERR_PH_D_SND_EOP_RPTD_3_TIMES  (0x4d54)   /* no response to EOP repeated 3 times */
+#define ERR_PH_D_SND_INVALID_RESP_TO_EOP (0x4d55) /* invalid response to EOP        */
+#define ERR_PH_D_SND_EOM_RPTD_3_TIMES  (0x4d56)   /* no response to EOM repeated 3 times */
+#define ERR_PH_D_SND_INVALID_RESP_TO_EOM (0x4d57) /* invalid response to EOM        */
+#define ERR_PH_D_SND_UNABLE_TO_CONT    (0x4d58)   /* unable to continue after PIN or PIP */
+#define ERR_PH_B_RCV_UNSPEC            (0x4d70)   /* unspecified receive phase B error */
+#define ERR_PH_B_RCV_RSPREC            (0x4d71)   /* RSPREC receive error phase B   */
+#define ERR_PH_B_RCV_COMREC            (0x4d72)   /* COMREC error in receive phase B */
+#define ERR_PH_B_RCV_EXP_PAGE_NOT_RCVD (0x4d73)   /* T30 T2 timeout, expected page not received */
+#define ERR_PH_B_RCV_T1_TIMEOUT_AFTER_EOM_RCVD (0x4d74)/* T30 T1 timeout after EOM received */
+#define ERR_PH_C_RCV_UNSPEC            (0x4d90)   /* unspecified receive phase C error */
+#define ERR_PH_C_RCV_EOL_MISSING       (0x4d91)   /* missing EOL after 5 seconds (3.2/T4) */
+#define ERR_PH_C_RCV_DCE_TO_DTE_BUFFER_OVERFLOW (0x4d93)/* DCE to DTE buffer overflow     */
+#define ERR_PH_C_RCV_BAD_CRC_OR_FRAME  (0x4d94)   /* bad crc or frame (ECM mode)    */
+#define ERR_PH_D_RCV_UNSPEC            (0x4da0)   /* unspecified receive phase D error */
+#define ERR_PH_D_RCV_RSPREC_INVALID_RESP_RCVD (0x4da1)/* RSPREC invalid respones received */
+#define ERR_PH_D_RCV_COMREC_INVALID_RESP_RCVD (0x4da2)/* COMREC invalid respones received */
+#define ERR_PH_D_RCV_UNABLE_TO_CONT    (0x4da3)   /* unable to continue after PIN or PIP */
+#define ERR_PH_B_SND_RESERVED1         (0xcde0)   /* reserved                       */
+#define ERR_PH_B_SND_RESERVED2         (0xcde1)   /* reserved                       */
+#define ERR_PH_B_SND_RESERVED3         (0xcde2)   /* reserved                       */
+#define ERR_PH_C_SND_RESERVED1         (0xcde3)   /* reserved                       */
+#define ERR_PH_C_SND_RESERVED2         (0xcde4)   /* reserved                       */
+#define ERR_PH_D_SND_RESERVED1         (0xcde5)   /* reserved                       */
+#define ERR_PH_D_SND_RESERVED2         (0xcde6)   /* reserved                       */
+#define ERR_PH_D_SND_RESERVED3         (0xcde7)   /* reserved                       */
+#define ERR_PH_B_RCV_NO_RESP           (0xcde8)   /* T2 timeout, no response        */
+#define ERR_PH_B_RCV_INVALID_RESP_RCVD (0xcde9)   /* invalid respones received      */
+#define ERR_PH_B_RCV_RESERVED3         (0xcdea)   /* reserved                       */
+#define ERR_PH_C_RCV_RESERVED1         (0xcdeb)   /* reserved                       */
+#define ERR_PH_C_RCV_RESERVED2         (0xcdec)   /* reserved                       */
+#define ERR_PH_D_RCV_NO_RESP           (0xcded)   /* T2 timeout, no response        */
+#define ERR_PH_D_RCV_INVALID_RESP_RCVD (0xcdee)   /* invalid respones received      */
+#define ERR_PH_D_RCV_RESERVED3         (0xcdef)   /* reserved                       */
+#define ERR_SGN_NOT_ALLOWED            (0xcdf0)   /* signal not allowed             */
+#define ERR_CCD_ENC                    (0xcdf1)   /* CCD encoding error             */
+
+/*
+ * Value constants for VAL_test_mode
+ */
+#define TST_OFF                        (0x0)      /* normal                         */
+#define TST_BCS                        (0x1)      /* test BCS formatter only        */
+#define TST_STUFF                      (0x2)      /* stuffing/destuffing off        */
+#define TST_FCS                        (0x4)      /* FCS generating/checking off    */
+#define TST_CTRL                       (0x8)      /* Control checking off           */
+#define TST_RTC                        (0x10)     /* RTC checking off               */
+#define TST_MIR                        (0x20)     /* mirror report strings          */
+#define TST_BUF                        (0x80)     /* show contents of buffer        */
+
+/*
+ * Value constants for VAL_bitorder
+ */
+#define FBO_NRM_DATA                   (0x0)      /* no change in bitorder for DATA  frames */
+#define FBO_NRM_STATUS                 (0x0)      /* no change in bitorder for STATUS  frames */
+#define FBO_REV_DATA                   (0x1)      /* reverse bitorder only for MSG frames */
+#define FBO_REV_STATUS                 (0x2)      /* reverse bitorder only for STATUS frames */
+
+/*
+ * Value constants for VAL_phase
+ */
+#define BCS_PHASE                      (0x0)      /* Not a message phase            */
+#define MSG_PHASE                      (0x1)      /* Message phase (C)              */
+
+/*
+ * Value constants for VAL_dti_conn
+ */
+#define T30_DISCONNECT_DTI             (0x0)      /* Disconnect DTI from T30        */
+#define T30_CONNECT_DTI                (0x1)      /* Connect DTI to T30             */
+
+/*
+ * Value constants for VAL_link_id
+ */
+#define T30_LINK_ID_DEFAULT            (0x0)      /* Default link id                */
+
+/*
+ * Value constants for VAL_dti_direction
+ */
+#define T30_DTI_NORMAL                 (0x0)      /* DTI used normally              */
+#define T30_DTI_INVERTED               (0x1)      /* DTI is inverted                */
+
+/*
+ * user defined constants
+ */
+#define CSI_LEN                        (0x14)     
+#define NSF_LEN                        (0x5a)     
+#define CIG_LEN                        (0x14)     
+#define NSC_LEN                        (0x5a)     
+#define TSI_LEN                        (0x14)     
+#define NSS_LEN                        (0x5a)     
+#define PWD_LEN                        (0x14)     
+#define SUB_LEN                        (0x14)     
+#define SEP_LEN                        (0x14)     
+#define T30_ENTITY_NAME_LEN            (0x6)      
+
+#include "CDG_LEAVE.h"
+
+
+#endif