--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/ui3/mfw/mfw_camapp.c	Sun Jan 21 03:09:00 2018 +0000
@@ -0,0 +1,1242 @@
+/*
++--------------------------------------------------------------------+
+| PROJECT:	MMI-Framework (8417)		$Workfile::	mfw_camapp.c	    $|
+| $Author::	NDH							$Revision::	1			    $|
+| CREATED:	21.05.04		     		$Modtime::	21.05.04 14:58	$|
+| STATE  :	code														 |
++--------------------------------------------------------------------+
+
+   MODULE  : MFW_CAMAPP
+
+   PURPOSE : This module contains Camera Interface functions.
+
+   HISTORY:
+
+	 Oct 23 2007. DRT:OMAPS00149238. x0083025 (adrian)
+	 Description: The quality is same for the 3 modes (economy, Standard, High)
+	 Solution: Data type sent to MM from BMI is different. Changed data type to match.
+
+     May 24 2007 DR:OMAPS00133032 x0061088(Prachi)
+     Description:Snapshot with border frame picture captured with tiny square 
+     frame on the left top corner.
+
+   
+    April 03 2007 ER:OMAPS00116772 x0061088(Prachi)
+    Description:Support of 1.3 Mpixel camera on Locosto Plus
+    
+   Mar 09 2007 DRT :OMAPS00118881 x0061088(Prachi)
+   Description :Camera Application Not Attached doesn't describe the real situation
+   Solution : mfw_msl_cam_create() is now checking for error "MSL_IMGCAP_ERROR_NOMEMORY"
+   returning from msl_cam_create().If msl_cam_create() returns the error
+   "MSL_IMGCAP_ERROR_NOMEMORY" then the MMI shows a error  message "Not Enough Memory" and
+   exits from the camera application.
+
+
+	xrashmic 11 Aug 2006, OMAPS00089912 
+	Based on framebuffer selection, the color format for snapshot would be RGB565 or YUYV 
+	Viewfinder frame buffer width and height set to QCIF width and QCIF height respectively
+	
+	xrashmic 02 Aug 2006, OMAPS00087612
+  	Hanlding of MSL errors for the snapshot save failed scenario
+
+    May  17 2006, xdeepadh - LOCOSTO-DRT-OMAPS00077374
+    Description:Saving Images in NAND flash during viewfinder->snapshot.
+    Solution: Based on the compile time flag FF_MMI_RFS_ENABLED, the 
+                  appropriate file system APIS will be called.
+                  
+    May  02 2006, xdeepadh - LOCOSTO-DRT-OMAPS00076437
+    Description:	MT call not handled in camera Application
+    Solution: The asynch event handling in Camera Application has been handled.
+
+    	Jan  10 2006, xdeepadh - LOCOSTO-ENH-
+ 	Description:	Application to test camera
+ 	Solution:	Implemented the camera application with following functionalities
+ 			preview, snapshot ,configure and image saving.
+
+*/
+
+
+
+
+#ifdef FF_MMI_CAMERA_APP
+
+
+
+/*
+** Include Files
+*/
+
+#define ENTITY_MFW
+/* includes */
+#include <string.h>
+
+
+#include "typedefs.h"
+#include "vsi.h"
+#include "pei.h"
+#include "custom.h"
+#include "gsm.h"
+
+#include "message.h" // included for aci_cmh.h .... 
+#include "prim.h" //included for aci_cmh.h .... 
+#include "aci_cmh.h" // included for mfw_sat.h, included for MmiDummy.h, included for MmiMenu.h 
+
+#include "mfw_mfw.h"
+#include "mfw_win.h"
+#include "mfw_camapp.h"
+#include "mks/mks_api.h"
+//      May  17 2006, xdeepadh - LOCOSTO-DRT-OMAPS00077374
+#ifdef FF_MMI_RFS_ENABLED
+#include "rfs/rfs_api.h"
+#else
+#include "ffs/ffs_api.h"
+#endif  //FF_MMI_RFS_ENABLED
+
+#include "mfw_ffs.h"
+
+#if (BOARD == 71)
+#define ISAMPLE
+#endif
+
+
+#include "dspl.h"
+#include "msl/inc/msl_imgcap.h"
+
+/*Variable declarations*/
+EXTERN MfwHdr * current_mfw_elem;
+MSL_HANDLE imgCapHandle;
+void Msl_mslil_Callback(void* handle, U32 ucp_type, U32 tCMd, U32 tStatus);
+
+//Feb  19 2006, x0061088(Prachi)  LOCOSTO-DRT-OMAPS00112518
+#ifdef FF_MMI_RELIANCE_FFS
+ T_FFS_DIR  close_dir;
+#endif
+
+/*******************************************************************************
+
+                                Local prototypes
+
+*******************************************************************************/
+
+BOOL mfw_cam_sign_exec (T_MFW_HDR * cur_elem, T_MFW_EVENT event, T_MFW_CAM_PARA * para);
+void mfw_cam_signal(T_MFW_EVENT event, void *para);
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_create
+
+ $Description:		This function  initialises an Mfw Camera entity and adds it to the Window Stack
+
+ $Returns:		T_MFW_HND	: A handle for the entity
+
+ $Arguments:		T_MFW_HND		: Parent Window Handle
+ 				T_MFW_EVENT	: Event Mask of the events to be handled
+ 				T_MFW_CB		: Callback function to handle the events
+
+*******************************************************************************/
+T_MFW_HND mfw_cam_create(T_MFW_HND hWin, T_MFW_EVENT event, T_MFW_CB cbfunc)
+{
+	T_MFW_HDR *hdr;
+	T_MFW_CAM  *cam_para;
+
+	TRACE_FUNCTION("mfw_cam_create()");
+
+	hdr = (T_MFW_HDR *) mfwAlloc(sizeof (T_MFW_HDR));
+	cam_para = (T_MFW_CAM *) mfwAlloc(sizeof (T_MFW_CAM));
+
+	if (!hdr OR !cam_para)
+		return FALSE;
+
+	/*
+	* initialisation of the handler
+	*/
+	cam_para->emask   = event;
+	cam_para->handler = cbfunc;
+
+	hdr->data = cam_para;		
+	hdr->type = MfwTypCt;		
+
+	/*
+	* installation of the handler
+	*/
+	return mfwInsert((T_MFW_HDR *)hWin, hdr);
+}
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_delete
+
+ $Description:		This function clears down an Mfw Camera entity and removes it from the
+ 				Window Stack
+
+ $Returns:		T_MFW_RES	: The result of the function
+
+ $Arguments:		T_MFW_HND	: The Handle of the entity to be removed
+
+*******************************************************************************/
+T_MFW_RES mfw_cam_delete(T_MFW_HND hnd)
+{
+	TRACE_FUNCTION("mfw_cam_delete()");
+
+	if (!hnd OR !((T_MFW_HDR *)hnd)->data)
+		return MFW_RES_ILL_HND;
+
+	if (!mfwRemove((T_MFW_HDR *)hnd))
+		return MFW_RES_ILL_HND;
+
+	mfwFree((U8 *)(((T_MFW_HDR *) hnd)->data),sizeof(T_MFW_CAM));
+	mfwFree((U8 *)hnd,sizeof(T_MFW_HDR));
+
+	return MFW_RES_OK;
+}
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_sign_exec
+
+ $Description:		This function sends the Mfw Camera test events from the Mfw to the BMI.
+
+ $Returns:		None
+
+ $Arguments:		None
+
+*******************************************************************************/
+BOOL mfw_cam_sign_exec (T_MFW_HDR * cur_elem, T_MFW_EVENT event, T_MFW_CAM_PARA * para)
+{
+	TRACE_FUNCTION("mfw_cam_sign_exec()");
+	TRACE_EVENT_P2("Event %d, mfw_state %d",event,para->state);
+
+	while (cur_elem)
+	{
+		/*
+		* event handler is available
+		*/
+		if (cur_elem->type EQ MfwTypCt)
+		{
+			T_MFW_CAM * cam_data;
+			/*
+			* handler is CM management handler
+			*/
+			cam_data = (T_MFW_CAM *)cur_elem->data;
+			if (cam_data->emask & event)
+			{
+				/*
+				* event is expected by the call back function
+				*/
+				cam_data->event = event;
+				switch (event)
+				{
+					/*
+					** Generic Events
+					*/
+					case E_CAM_INIT:
+						if(para!=NULL)
+							memcpy (&cam_data->para, para, sizeof (T_MFW_CAM_PARA));
+						break;
+					case E_CAM_VIEWFINDER:
+						if(para!=NULL)
+							memcpy (&cam_data->para, para, sizeof (T_MFW_CAM_PARA));
+						break;
+					case E_CAM_SNAPSHOT:
+						if(para!=NULL)
+							memcpy (&cam_data->para, para, sizeof (T_MFW_CAM_PARA));
+						break;
+					/* April 03 2007 ER:OMAPS00116772 x0061088(Prachi) */	
+    				case E_CAM_PREVIEW:
+						if(para!=NULL)
+							memcpy (&cam_data->para, para, sizeof (T_MFW_CAM_PARA));
+						break;						
+					case E_CAM_PAUSE:
+						if(para!=NULL)
+							memcpy (&cam_data->para, para, sizeof (T_MFW_CAM_PARA));
+						break;
+					case E_CAM_DEINIT:
+						if(para!=NULL)
+							memcpy (&cam_data->para, para, sizeof (T_MFW_CAM_PARA));
+						break;
+				}
+
+				/*
+				* if call back defined, call it
+				*/
+				if (cam_data->handler)
+				{
+					// store current mfw elem
+					current_mfw_elem = cur_elem;
+
+					if ((*(cam_data->handler)) (cam_data->event, (void *)&cam_data->para))
+						return TRUE;
+				}
+			}
+		}
+		cur_elem = cur_elem->next;
+	}
+	return FALSE;
+}
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_signal
+
+ $Description:		This function sends the Mfw Bluetooth events from the Mfw to the BMI.
+
+ $Returns:		None
+
+ $Arguments:		T_MFW_EVENT	: The event to be sent to the BMI
+ 				void *			: Pointer to the Event data
+
+*******************************************************************************/
+void mfw_cam_signal(T_MFW_EVENT event, void *para)
+{
+	UBYTE temp;
+	temp = dspl_Enable(0);
+
+	TRACE_FUNCTION("mfw_cam_signal()");
+
+	if (mfwSignallingMethod EQ 0)
+	{
+		/*
+		* focus is on a window
+		*/
+		if (mfwFocus)
+		{
+			/*
+			* send event to sim management
+			* handler if available
+			*/
+			if (mfw_cam_sign_exec (mfwFocus, event, para))
+			{
+				dspl_Enable(temp);
+				return;
+			}
+		}
+
+		/*
+		* actual focussed window is not available
+		* or has no network management registration
+		* handler, then search all nodes from the root.
+		*/
+		if (mfwRoot)
+			mfw_cam_sign_exec (mfwRoot, event, para);
+	}
+	else
+	{
+		MfwHdr * h = 0;
+
+		/*
+		* Focus set, then start here
+		*/
+		if (mfwFocus)
+			h = mfwFocus;
+
+		/*
+		* Focus not set, then start root
+		*/
+		if (!h)
+			h = mfwRoot;
+
+		/*
+		* No elements available, return
+		*/
+		while (h)
+		{
+			/*
+			* Signal consumed, then return
+			*/
+			if (mfw_cam_sign_exec (h, event, para))
+			{
+				dspl_Enable(temp);
+				return;
+			}
+
+			/*
+			* All windows tried inclusive root
+			*/
+			if (h == mfwRoot)
+			{
+				dspl_Enable(temp);
+				return;
+			}
+
+			/*
+			* get parent window
+			*/
+			h = mfwParent(mfwParent(h));
+
+			if (h)
+				h = ((MfwWin * )(h->data))->elems;
+		}
+		
+		mfw_cam_sign_exec (mfwRoot, event, para);
+		
+	}
+	
+	dspl_Enable(temp);
+
+	return;
+}
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_setDefaultConfigurations
+
+ $Description:		This function sets the ImgCap ucp structure to default values
+
+ $Returns:		None
+
+ $Arguments:		None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_cam_setDefaultConfigurations()
+{
+	MSL_IMGCAP_STATUS status;
+
+
+	
+
+	MSL_CAM_CONFIGTYPE mfw_cam_config;
+	MSL_DISPLAY_CONFIGTYPE mfw_cam_dspl_config;
+
+        TRACE_FUNCTION("mfw_msl_cam_setDefaultConfig()");
+
+       status = MSL_ImgCap_SetConfig(imgCapHandle,MSL_CALLBACKSET_CONFIGINDEX,(MSL_CALLBACK)Msl_mslil_Callback);
+
+	mfw_cam_config.tImgFormat = MSL_COLOR_RGB565;
+	mfw_cam_config.tMode = MSL_CAMERAMODE_VF;
+	mfw_cam_config.unImgHeight = QCIF_HEIGHT ;  //xrashmic 11 Aug 2006, OMAPS00089912 
+	mfw_cam_config.unImgWidth  = QCIF_WIDTH;
+
+	if(status == MSL_IMGCAP_STATUS_OK)
+	    status =  MSL_ImgCap_SetConfig(imgCapHandle,MSL_CAMERA_CONFIGINDEX,&mfw_cam_config);
+
+
+	mfw_cam_dspl_config.tImgFormat = MSL_COLOR_RGB565;
+	         
+       mfw_cam_dspl_config.unDisplayImgHeight = QCIF_HEIGHT;//xrashmic 11 Aug 2006, OMAPS00089912
+	mfw_cam_dspl_config.unDisplayImgWidth = QCIF_WIDTH;
+	mfw_cam_dspl_config.unDisplayXOffset = 0;
+	mfw_cam_dspl_config.unDisplayYOffset = 0;
+	if(status == MSL_IMGCAP_STATUS_OK)
+		status = MSL_ImgCap_SetConfig(imgCapHandle,MSL_DISPLAY_CONFIGINDEX,&mfw_cam_dspl_config);
+ /* April 03 2007 ER:OMAPS00116772 x0061088(Prachi) */ 
+
+    status = MSL_ImgCap_SetConfig(imgCapHandle, MSL_SAVESS_CONFIGINDEX,&FFS_flashData.cam_auto_save);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in configuring");
+			return MFW_CAM_ERROR;
+	}
+
+	return MFW_CAM_NO_ERROR;
+
+  
+}
+
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_setSnapshotConfigurations
+
+ $Description:		This function configures the msl with default values
+
+ $Returns:		None
+
+ $Arguments:		None
+xrashmic 11 Aug 2006, OMAPS00089912 : Added a parameter boolean 'frame'
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_cam_setSnapshotConfigurations(BOOL frame)
+{
+	MSL_IMGCAP_STATUS status;
+
+	char  filename[CAM_FILENAME_EDITOR_INPUT_LEN];
+	
+	MSL_CAM_CONFIGTYPE mfw_cam_config;
+	MSL_DISPLAY_CONFIGTYPE mfw_cam_dspl_config;
+	MSL_FILE_CONFIGTYPE mfw_cam_file_config ;
+
+        TRACE_FUNCTION("mfw_cam_setSnapshotConfigurations()");
+
+       status = MSL_ImgCap_SetConfig(imgCapHandle,MSL_CALLBACKSET_CONFIGINDEX,(MSL_CALLBACK)Msl_mslil_Callback);
+        //xrashmic 11 Aug 2006, OMAPS00089912 
+        //For optimal performance in the camera application Color format for camera capture 
+        //in the case of snapshot should be YUYV for no frame and RGB565 only if overlay option is selected
+        if(frame)
+		mfw_cam_config.tImgFormat = MSL_COLOR_RGB565;
+	else
+		mfw_cam_config.tImgFormat = MSL_COLOR_YUYV;
+	mfw_cam_config.tMode = MSL_CAMERAMODE_SS;
+//added by prachi
+#if CAM_SENSOR == 1
+    if (FFS_flashData.cam_changed_resolution ==  TRUE )
+  	{
+ 	switch(FFS_flashData.cam_resolution)
+	{
+		case CAM_RESOLUTION_VGA:
+			mfw_cam_config.unImgHeight = VGA_HEIGHT ;  
+			mfw_cam_config.unImgWidth  = VGA_WIDTH;
+			break;
+		case CAM_RESOLUTION_QCIF:
+            mfw_cam_config.unImgHeight = QCIF_HEIGHT ;  
+	        mfw_cam_config.unImgWidth  = QCIF_WIDTH;
+			break;
+		case CAM_RESOLUTION_SXGA:
+            mfw_cam_config.unImgHeight = SXGA_HEIGHT ; 
+	        mfw_cam_config.unImgWidth  = SXGA_WIDTH;
+			break;
+	}
+		
+  	}
+  else 
+  	{
+  	/* May 24 2007 DR:OMAPS00133032 x0061088(Prachi)*/
+    mfw_cam_config.unImgHeight = VGA_HEIGHT ; 
+	mfw_cam_config.unImgWidth  = VGA_WIDTH;
+  	}
+#else 
+    mfw_cam_config.unImgHeight =VGA_HEIGHT;
+	mfw_cam_config.unImgWidth =VGA_WIDTH;
+#endif  
+	
+	if(status == MSL_IMGCAP_STATUS_OK)
+	    status =  MSL_ImgCap_SetConfig(imgCapHandle,MSL_CAMERA_CONFIGINDEX,&mfw_cam_config);
+
+	mfw_cam_dspl_config.tImgFormat = MSL_COLOR_RGB565;
+        
+	mfw_cam_dspl_config.unDisplayImgHeight = QCIF_HEIGHT; //xrashmic 11 Aug 2006, OMAPS00089912 
+	mfw_cam_dspl_config.unDisplayImgWidth = QCIF_WIDTH;
+	mfw_cam_dspl_config.unDisplayXOffset = 0;
+	mfw_cam_dspl_config.unDisplayYOffset = 0;
+	if(status == MSL_IMGCAP_STATUS_OK)
+		status = MSL_ImgCap_SetConfig(imgCapHandle,MSL_DISPLAY_CONFIGINDEX,&mfw_cam_dspl_config);
+
+        mfw_cam_file_config.sFileName= (char *) mfwAlloc(CAM_FILENAME_EDITOR_INPUT_LEN);
+
+	switch(FFS_flashData.snap_storage)
+	{
+		case SNAP_STG_FFS:
+		       sprintf(filename,"%s%s/%s%d","/FFS/mmi",JPEG_CONTENT_DIR,(char *)mmi_get_Filename(),(int)FFS_flashData.camera_file_counter);			
+			break;
+		case SNAP_STG_NORMS:
+		       sprintf(filename,"%s%s/%s%d","/NOR/",JPEG_CONTENT_DIR,(char *)mmi_get_Filename(),(int)FFS_flashData.camera_file_counter);			
+			break;
+		case SNAP_STG_NAND:
+			sprintf(filename,"%s%s/%s%d","/NAND",JPEG_CONTENT_DIR,(char *)mmi_get_Filename(),(int)FFS_flashData.camera_file_counter);			
+			break;
+		case SNAP_STG_MMC:
+			sprintf(filename,"%s%s/%s%d","/MMC",JPEG_CONTENT_DIR,(char *)mmi_get_Filename(),(int)FFS_flashData.camera_file_counter);			
+			break;
+	}
+	
+        TRACE_EVENT_P1("filename ************is %s",filename);
+        strcpy(mfw_cam_file_config.sFileName, filename);
+		
+//      May  17 2006, xdeepadh - LOCOSTO-DRT-OMAPS00077374        
+//Set the file type
+//#ifdef FF_MMI_RFS_ENABLED        
+//        mfw_cam_file_config.tFileType = MSL_FILETYPE_RFS;
+#ifdef FF_MMI_FILEMANAGER
+        mfw_cam_file_config.tFileType = MSL_FILETYPE_RFS;
+#else
+        mfw_cam_file_config.tFileType = MSL_FILETYPE_FFS;
+#endif
+        if(status == MSL_IMGCAP_STATUS_OK)
+             status =  MSL_ImgCap_SetConfig(imgCapHandle,MSL_ENCFILE_CONFIGINDEX,&mfw_cam_file_config);
+        mfwFree((U8 *)mfw_cam_file_config.sFileName,CAM_FILENAME_EDITOR_INPUT_LEN);
+
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in configuring");
+			return MFW_CAM_ERROR;
+	}
+
+	return MFW_CAM_NO_ERROR;
+
+  
+}
+ 
+ 
+ 
+/*******************************************************************************
+
+ $Function:		mfw_cam_setQualityConfig
+
+ $Description:		This function is used to update the MSL of the new quliaty factor in ImgCap ucp 
+ 
+ $Returns:		None
+
+ $Arguments:		None
+ 
+*******************************************************************************/
+// Oct 23 2007. DRT:OMAPS00149238. x0083025 (adrian)
+T_MFW_CAM_ERROR mfw_msl_cam_setQualityConfig(U32 qFactor)
+{
+	MSL_IMGCAP_STATUS status;
+   	TRACE_FUNCTION("mfw_msl_cam_setQualityConfig()");
+
+	status=MSL_ImgCap_SetConfig(imgCapHandle,MSL_ENCQUALITY_CONFIGINDEX,&qFactor);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in updating quality config");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_setRotateConfig
+
+ $Description:		This function is used to update the MSL of the new rotate in ImgCap ucp 
+ 
+ $Returns:		None
+
+ $Arguments:		None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_msl_cam_setRotateConfig(int tRotate)
+{
+	MSL_IMGCAP_STATUS status;
+   	TRACE_FUNCTION("mfw_msl_cam_setRotateConfig()");
+
+	status=MSL_ImgCap_SetConfig(imgCapHandle,MSL_ROTATE_CONFIGINDEX,&tRotate);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in updating the rotate config");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_setBrustModeConfig
+
+ $Description:		This function is used to update the MSL of the Burst mode in ImgCap ucp 
+ 
+ $Returns:		None
+
+ $Arguments:		None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_msl_cam_setBurstModeConfig(UBYTE burstCount)
+{
+	MSL_IMGCAP_STATUS status;
+	TRACE_FUNCTION("mfw_msl_cam_setBurstModeConfig()");
+
+	status=MSL_ImgCap_SetConfig(imgCapHandle, MSL_BURSTCOUNT_CONFIGINDEX,&burstCount);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+		TRACE_ERROR("Error in updating Burstmode config");
+		return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_setfileNameConfig
+
+ $Description:		This function is used to update the MSL of the filename of the saved image
+ 				in ImgCap ucp 
+ 
+ $Returns:		None
+
+ $Arguments:		None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_msl_cam_setFileNameConfig()
+{
+	MSL_IMGCAP_STATUS status;
+	MSL_FILE_CONFIGTYPE mfw_cam_file_config ;
+	char  filename[CAM_FILENAME_EDITOR_INPUT_LEN];
+
+   	TRACE_FUNCTION("mfw_msl_cam_setFileNameConfig()");
+
+        mfw_cam_file_config.sFileName= (char *) mfwAlloc(CAM_FILENAME_EDITOR_INPUT_LEN);
+
+	switch(FFS_flashData.snap_storage)
+	{
+		case SNAP_STG_FFS:
+		       sprintf(filename,"%s%s/%s%d","/FFS/mmi",JPEG_CONTENT_DIR,(char *)mmi_get_Filename(),(int)FFS_flashData.camera_file_counter);			
+			break;
+		case SNAP_STG_NORMS:
+		       sprintf(filename,"%s%s/%s%d","/NOR/mmi",JPEG_CONTENT_DIR,(char *)mmi_get_Filename(),(int)FFS_flashData.camera_file_counter);			
+			break;
+		case SNAP_STG_NAND:
+			sprintf(filename,"%s%s/%s%d","/NAND",JPEG_CONTENT_DIR,(char *)mmi_get_Filename(),(int)FFS_flashData.camera_file_counter);			
+			break;
+		case SNAP_STG_MMC:
+			sprintf(filename,"%s%s/%s%d","/MMC",JPEG_CONTENT_DIR,(char *)mmi_get_Filename(),(int)FFS_flashData.camera_file_counter);			
+			break;
+	}
+	
+        TRACE_EVENT_P1("filename ************is %s",filename);
+        strcpy(mfw_cam_file_config.sFileName, filename);
+//      May  17 2006, xdeepadh - LOCOSTO-DRT-OMAPS00077374        
+// Set the file type
+//#ifdef FF_MMI_RFS_ENABLED        
+#ifdef FF_MMI_FILEMANAGER   
+        mfw_cam_file_config.tFileType = MSL_FILETYPE_RFS;
+#else
+        mfw_cam_file_config.tFileType = MSL_FILETYPE_FFS;
+#endif
+        /*if(status != MSL_IMGCAP_STATUS_OK)*//*a0393213 warnings removal-variable "status" is used before its value is set*/
+        status =  MSL_ImgCap_SetConfig(imgCapHandle,MSL_ENCFILE_CONFIGINDEX,&mfw_cam_file_config);
+        mfwFree((U8 *)mfw_cam_file_config.sFileName,CAM_FILENAME_EDITOR_INPUT_LEN);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in updating filename");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_set_overlayConfig
+
+ $Description:		This function is used to update the MSL of the Border frames for both 
+ 				Viewfinder and Snapshot
+ 
+ $Returns:		None
+
+ $Arguments:		None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_msl_cam_setOverlayConfig(MSL_U8 * overlayBuffer)
+{
+	MSL_IMGCAP_STATUS status;
+	MSL_IMG_OVERLAYCONFIG mfw_cam_overlayconfig ;
+   	TRACE_FUNCTION("mfw_msl_cam_setOverlayConfig()");
+
+	mfw_cam_overlayconfig.nAlpha = 0;
+	mfw_cam_overlayconfig.nImgHeight = QCIF_HEIGHT;        //xrashmic 11 Aug 2006, OMAPS00089912 
+	mfw_cam_overlayconfig.nImgWidth = QCIF_WIDTH;
+	mfw_cam_overlayconfig.nOverlayXOffset =  0;
+	mfw_cam_overlayconfig.nOverlayYOffset =  0;
+	mfw_cam_overlayconfig.nTransparencyColor = 0x0020 ;
+	mfw_cam_overlayconfig.pOverlayBuff = overlayBuffer;
+	mfw_cam_overlayconfig.tOverlayMode =  MSL_OVERLAYMODE_COLORKEY;
+	status =  MSL_ImgCap_SetConfig(imgCapHandle,MSL_OVERLAY_CONFIGINDEX,&mfw_cam_overlayconfig);
+	    
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in pdating viewfinder config");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_set_SSOverlayConfig
+
+ $Description:		This function is used to update the MSL of the Border frames for both 
+ 				Viewfinder and Snapshot
+ 
+ $Returns:		None
+
+ $Arguments:		None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_cam_set_SSOverlayConfig(MSL_U8 * overlayBuffer)
+{
+	MSL_IMGCAP_STATUS status;
+	MSL_IMG_OVERLAYCONFIG mfw_cam_overlayconfig ;
+   	TRACE_FUNCTION("mfw_cam_set_SSOverlayConfig()");
+
+	mfw_cam_overlayconfig.nAlpha = 0;
+	#if CAM_SENSOR == 1
+	if( FFS_flashData.cam_changed_resolution == TRUE )
+	{
+      switch(FFS_flashData.cam_resolution)
+      	{
+      	case CAM_RESOLUTION_VGA:
+          mfw_cam_overlayconfig.nImgHeight = VGA_HEIGHT;
+	      mfw_cam_overlayconfig.nImgWidth = VGA_WIDTH;
+          break;
+        case CAM_RESOLUTION_QCIF:
+          mfw_cam_overlayconfig.nImgHeight = QCIF_HEIGHT;
+	      mfw_cam_overlayconfig.nImgWidth = QCIF_WIDTH;
+          break;
+      	}
+	} 
+    else
+    {
+       mfw_cam_overlayconfig.nImgHeight = VGA_HEIGHT;
+	   mfw_cam_overlayconfig.nImgWidth = VGA_WIDTH;
+    }
+	#else
+	mfw_cam_overlayconfig.nImgHeight = VGA_HEIGHT;
+	mfw_cam_overlayconfig.nImgWidth = VGA_WIDTH;
+	#endif
+	mfw_cam_overlayconfig.nOverlayXOffset =  0;
+	mfw_cam_overlayconfig.nOverlayYOffset =  0;
+	mfw_cam_overlayconfig.nTransparencyColor = 0x0020 ;
+	mfw_cam_overlayconfig.pOverlayBuff = overlayBuffer;
+	mfw_cam_overlayconfig.tOverlayMode =  MSL_OVERLAYMODE_COLORKEY;
+	status =  MSL_ImgCap_SetConfig(imgCapHandle,MSL_OVERLAY_CONFIGINDEX,&mfw_cam_overlayconfig);
+	    
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in pdating viewfinder config");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_set_zoomConfig
+
+ $Description:		This function is used to update the MSL of the Border frames for both 
+ 				Viewfinder and Snapshot
+ 
+ $Returns:		None
+
+ $Arguments:		None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_msl_cam_setZoomConfig(U32  zFactor)
+{
+	MSL_IMGCAP_STATUS status;
+	U32 zoomFactor = zFactor ;
+   	TRACE_FUNCTION("mfw_msl_cam_setZoomConfig()");
+
+	status=MSL_ImgCap_SetConfig(imgCapHandle,MSL_ZOOM_CONFIGINDEX,&zoomFactor);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in updating zoom config");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+/*******************************************************************************
+
+ $Function:		mfw_msl_cam_cb
+
+ $Description:		This is the callback funtion for the imgCap UCP
+ 
+ $Returns:		None
+
+ $Arguments:		tCmd - specifies the cmd for which the callback is received
+ 				tStatus - Status message
+ 
+*******************************************************************************/
+void mfw_msl_cam_cb( U32 tCMd,U32 tStatus)
+{
+	T_MFW_CAM_PARA para;
+
+   	TRACE_FUNCTION("mfw_msl_cam_cb()");
+
+	switch(tCMd)
+	{
+		case MSL_CMD_INIT:
+			if(tStatus==MSL_IMGCAP_STATUS_OK)
+		   	{
+		   		TRACE_EVENT("Init Done");
+				para.state=CAM_STATE_INIT_DONE;
+			}
+			else	
+			{
+		   		TRACE_EVENT("Init Error");
+				para.state=CAM_STATE_ERROR;
+			}
+			mfw_cam_signal(E_CAM_INIT,&para);
+			break;
+		case MSL_CMD_VIEWFINDER:
+			if(tStatus==MSL_IMGCAP_STATUS_OK)
+		   	{
+		   		TRACE_EVENT("Viewfinder done");
+				para.state=CAM_STATE_VIEWFINDER_DONE;
+			}
+			else	
+			{
+		   		TRACE_EVENT("Viewfinder Error");
+				para.state=CAM_STATE_ERROR;
+			}
+			mfw_cam_signal(E_CAM_VIEWFINDER,&para);
+			break;
+		case MSL_CMD_SNAPSHOT:
+			if(tStatus==MSL_IMGCAP_STATUS_OK)
+		   	{
+		   		TRACE_EVENT("Snapshot done");
+				para.state=CAM_STATE_SNAPSHOT_DONE;
+			}
+			//xrashmic 02 Aug 2006, OMAPS00087612
+			//Saving of snapshot to the filesystem has failed.
+			else if(tStatus==MSL_IMGCAP_ERROR_IOWRITE)
+			{
+				TRACE_EVENT("Snapshot not saved");
+				para.state=CAM_STATE_SNAPSHOT_SAVE_ERROR;
+			}
+			else if(tStatus==MSL_IMGCAP_ERROR_NOSPACE)
+			{
+				TRACE_EVENT("No Space in File System");
+				para.state=CAM_STATE_SNAPSHOT_NOSPACE_ERROR;
+			}	
+			else	
+		   	{
+		   		TRACE_EVENT("Snapshot error");
+				para.state=CAM_STATE_ERROR;
+			}
+			mfw_cam_signal(E_CAM_SNAPSHOT,&para);
+			break;
+		case MSL_CMD_PAUSE:
+			if(tStatus==MSL_IMGCAP_STATUS_OK)
+		   	{
+		   		TRACE_EVENT("Pause Done");
+				para.state=CAM_STATE_PAUSE_DONE;
+			}
+			else	
+		   	{
+		   		TRACE_EVENT("Pause error");
+				para.state=CAM_STATE_ERROR;
+			}
+			mfw_cam_signal(E_CAM_PAUSE,&para);
+			break;
+		case MSL_CMD_DEINIT	:
+			if(tStatus==MSL_IMGCAP_STATUS_OK)
+		   	{
+		   		TRACE_EVENT("Deint done");
+				para.state=CAM_STATE_DEINIT_DONE;
+			}
+			else	
+		   	{
+		   		TRACE_EVENT("Pause error");
+				para.state=CAM_STATE_ERROR;
+			}
+			mfw_cam_signal(E_CAM_DEINIT,&para);
+			break;
+        /* April 03 2007 ER:OMAPS00116772 x0061088(Prachi) */
+        case MSL_CMD_PREVIEWDONE :
+            if(tStatus == MSL_IMGCAP_STATUS_OK) 
+			{
+				 TRACE_EVENT("Preview Done");
+			 	 para.state = CAM_STATE_PREVIEW_DONE;
+            } 	
+			else
+			{
+				TRACE_EVENT("Preview Error");
+				para.state = CAM_STATE_ERROR;
+			}
+			mfw_cam_signal(E_CAM_PREVIEW,&para);
+			break;
+	}
+}
+
+/*******************************************************************************
+
+ $Function:	mfw_cam_creates
+
+ $Description:	This function creates the JPEG_CONTENT_DIR and creates the camera engine. 
+
+ $Returns:	None
+
+ $Arguments:	None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_msl_cam_create(void)
+{
+	MSL_IMGCAP_STATUS status;
+
+//May  17 2006, xdeepadh - LOCOSTO-DRT-OMAPS00077374
+#ifdef FF_MMI_RFS_ENABLED
+	T_RFS_DIR  dir;
+ 	T_RFS_RET rfsResult;
+	
+	TRACE_EVENT("mfw_cam_init()");
+   	 rfsResult = rfs_opendir(JPEG_CONTENT_DIR,&dir);           
+	 
+        if(RFS_ENOENT == rfsResult)
+        {
+        	//Directory does not exsists, create it and initialize the table and write it to FFS
+		/*rfsResult = rfs_mkdir(JPEG_CONTENT_DIR,RFS_IRWXU);
+		if(RFS_EOK == rfsResult)
+		{
+				TRACE_EVENT("open Dir Passed"); 
+    		}
+    		else
+       			TRACE_EVENT("open Dir Failed");    */
+        }
+#else       
+	T_FFS_DIR  dir;
+ 	T_FFS_RET ffsResult;
+	
+	TRACE_FUNCTION("mfw_cam_init()");
+
+	ffsResult = ffs_opendir(JPEG_CONTENT_DIR,&dir);       
+//Feb  19 2006, x0061088(Prachi)LOCOSTO-DRT-OMAPS00112518
+#ifdef FF_MMI_RELIANCE_FFS
+    close_dir = dir;
+#endif 
+
+		
+        if(EFFS_NOTFOUND == ffsResult)
+    	{
+    		//Directory does not exsists, create it and initialize the table and write it to FFS
+		ffsResult = ffs_mkdir(JPEG_CONTENT_DIR);
+		if(EFFS_OK == ffsResult)
+		{
+			TRACE_EVENT("Create Dir Passed"); 
+		}
+			else
+   			 TRACE_EVENT("Create Dir Failed");    
+    	} 
+	else 
+	{
+		TRACE_EVENT_P1("No directory created %d",ffsResult);
+	}
+#endif //FF_MMI_RFS_ENABLED
+ 
+	status = MSL_ImgCap_Create (&imgCapHandle);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+	   //Mar 09 2007 DRT :OMAPS00118881 x0061088(Prachi)
+	    TRACE_ERROR("Error creating handler");
+        if(status == MSL_IMGCAP_ERROR_NOMEMORY)
+        {
+            TRACE_ERROR("No memory Error");
+			return MFW_CAM_ERROR_NO_MEMORY;
+        }
+        else
+       	{
+       	  TRACE_ERROR("Error creating handler");
+		  return MFW_CAM_ERROR;
+        }  
+	}
+
+	return MFW_CAM_NO_ERROR;
+}
+/*******************************************************************************
+
+ $Function:	mfw_cam_init
+
+ $Description:	Initializes the camera engine. 
+
+ $Returns:	None
+
+ $Arguments:	None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_msl_cam_init(void)
+{
+	MSL_IMGCAP_STATUS status;
+
+	TRACE_FUNCTION("mfw_msl_cam_init()");
+	//Do the default configuration for the camera and image components
+	
+	status=MSL_ImgCap_Init(imgCapHandle);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in initializing MSL camera");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+/*******************************************************************************
+
+ $Function:		mfw_msl_cam_Deinit
+
+ $Description:		Deinitializes the cam
+
+ $Returns:		None
+
+ $Arguments:		None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_msl_cam_deinit(void)
+{
+	MSL_IMGCAP_STATUS status;
+	TRACE_FUNCTION("mfw_msl_cam_Deinit()");
+	status = MSL_ImgCap_Deinit(imgCapHandle);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in De-initializing MSL camera");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+/*******************************************************************************
+
+ $Function:		mfw_cam_exit
+
+ $Description:		Exits the camera application
+
+ $Returns:		None
+
+ $Arguments:		None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_msl_cam_exit(void)
+{
+	MSL_IMGCAP_STATUS status;
+	TRACE_FUNCTION("mfw_msl_cam_exit()");
+
+	status=MSL_ImgCap_Destroy(imgCapHandle);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in exiting MSL camera");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+/*******************************************************************************
+
+ $Function:     mfw_cam_launch_viewfinder
+
+ $Description:	This function starts the viewfinder mode
+ 
+ $Returns:	None
+
+ $Arguments: 	None
+
+*******************************************************************************/
+ T_MFW_CAM_ERROR mfw_msl_cam_viewfinder()
+{
+ 	MSL_IMGCAP_STATUS status;
+
+	TRACE_FUNCTION("mfw_msl_cam_viewfinder()");
+
+	status=MSL_ImgCap_Viewfinder(imgCapHandle);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in launching viewfinder");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+	
+}
+
+/*******************************************************************************
+
+ $Function:     mfw_cam_suspend_camera
+
+ $Description: This function pauses the ImgCap UCP
+
+ $Returns:	None
+
+ $Arguments: None
+
+*******************************************************************************/
+ T_MFW_CAM_ERROR mfw_msl_cam_suspend_camera()
+{
+	MSL_IMGCAP_STATUS status;
+ 	TRACE_FUNCTION("mfw_msl_cam_suspend_camera()");
+
+	status=MSL_ImgCap_Pause(imgCapHandle);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in pausing MSL camera");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+/*******************************************************************************
+
+ $Function:     mfw_cam_snapshot
+
+ $Description:	This function takes the snapshot. and also saves the same to FFS 
+
+ $Returns:	None
+
+ $Arguments:	None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_msl_cam_snapshot()
+{
+	MSL_IMGCAP_STATUS status;
+	TRACE_FUNCTION("mfw_msl_cam_snapshot()");   
+
+	status=MSL_ImgCap_Snapshot(imgCapHandle);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in taking the snapshot");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+
+
+/*******************************************************************************
+
+ $Function:     mfw_close_dir
+
+ $Description:	This function close the directory /mm/jpeg/
+
+ $Returns:	None
+
+ $Arguments:	None
+
+*******************************************************************************/
+ //Feb  19 2006, x0061088(Prachi)  LOCOSTO-DRT-OMAPS00112518
+#ifdef FF_MMI_RELIANCE_FFS 
+void mfw_close_dir()
+{
+   ffs_closedir(close_dir);
+   return;
+}
+#endif
+
+/* April 03 2007 ER:OMAPS00116772 x0061088(Prachi) */
+/*******************************************************************************
+
+ $Function:		mfw_cam_setAutoSave
+
+ $Description:		This function is used to update the MSL for Auto Save 
+ 
+ $Returns:		None
+
+ $Arguments:		None
+ 
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_msl_cam_setAutoSave(UBYTE autoSave)
+{
+	MSL_IMGCAP_STATUS status;
+   	TRACE_FUNCTION("mfw_msl_cam_setAutoSave()");
+
+	status=MSL_ImgCap_SetConfig(imgCapHandle,MSL_SAVESS_CONFIGINDEX,&autoSave);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in while setting for Auto Save");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+/* April 03 2007 ER:OMAPS00116772 x0061088(Prachi) */
+/*******************************************************************************
+
+ $Function:		mfw_msl_cam_save
+
+ $Description:	 Calls MSL save
+
+ $Returns:		None
+
+ $Arguments:		None
+
+*******************************************************************************/
+T_MFW_CAM_ERROR mfw_msl_cam_save(void)
+{
+	MSL_IMGCAP_STATUS status;
+	TRACE_FUNCTION("mfw_msl_cam_Deinit()");
+	
+	status=(MSL_IMGCAP_STATUS)MSL_ImgCap_SaveEncodedBuffers(imgCapHandle);
+	if(status != MSL_IMGCAP_STATUS_OK)
+	{
+			TRACE_ERROR("Error in De-initializing MSL camera");
+			return MFW_CAM_ERROR;
+	}
+	return MFW_CAM_NO_ERROR;
+}
+
+
+#endif