diff doc/Compiling @ 540:f551ffdfe938

doc/Compiling: update for c155 target support and fc-host-tools-r9
author Mychaela Falconia <falcon@freecalypso.org>
date Tue, 06 Nov 2018 05:03:55 +0000
parents 6917ea63bffa
children e0bc32828f88
line wrap: on
line diff
--- a/doc/Compiling	Tue Nov 06 04:31:52 2018 +0000
+++ b/doc/Compiling	Tue Nov 06 05:03:55 2018 +0000
@@ -80,6 +80,7 @@
 
 c11x		Motorola C11x/12x
 c139		Motorola C139/140
+c155		Motorola C155/156
 dsample		TI's D-Sample C05 board (no working radio currently)
 fcdev3b		FreeCalypso FCDEV3B
 gtamodem	The Calypso GSM/GPRS modem in Openmoko GTA01/02 smartphones
@@ -114,12 +115,10 @@
 source file.
 
 When the build is done, the flashable firmware image will be in fwimage.bin.
-This image is to be flashed with fc-loadtool at address 0x10000 on Mot C11x and
-C139 targets, and at address 0 on the more sensible targets that have the
-Calypso boot ROM enabled.  The build system also produces a short text file
-named flash-script which is a flashing command script for fc-loadtool that
-erases the correct range of flash sectors and then programs fwimage.bin at the
-right address.
+This image is to be flashed with fc-loadtool at a target-dependent base address.
+The build system also produces a short text file named flash-script which is a
+flashing command script for fc-loadtool that erases the correct range of flash
+sectors and then programs fwimage.bin at the right address.
 
 When building firmware for the FCDEV3B or for the Pirelli, one can build either
 a flashable image or a RAM-loadable one - or both.  Because this part of the
@@ -137,6 +136,6 @@
 (flash or run in RAM as appropriate), you will need to use FreeCalypso host
 tools.  As of this writing, the latest packaged release is this one:
 
-ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/fc-host-tools-r8.tar.bz2
+ftp://ftp.freecalypso.org/pub/GSM/FreeCalypso/fc-host-tools-r9.tar.bz2
 
 Please see target-specific notes for more details.