view cdg-hybrid/cdginc/p_ipa.val @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents e7a67accfad9
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_ipa.val                                                      |
| SOURCE  : "sap\ipa.pdf"                                                  |
| LastModified : "2003-08-30"                                              |
| IdAndVersion : "8444.104.02.007"                                         |
| SrcFileTime  : "Thu Nov 29 09:43:54 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_IPA_VAL
#define P_IPA_VAL


#define CDG_ENTER__P_IPA_VAL

#define CDG_ENTER__FILENAME _P_IPA_VAL
#define CDG_ENTER__P_IPA_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_IPA_VAL__LAST_MODIFIED _2003_08_30
#define CDG_ENTER__P_IPA_VAL__ID_AND_VERSION _8444_104_02_007

#define CDG_ENTER__P_IPA_VAL__SRC_FILE_TIME _Thu_Nov_29_09_43_54_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_IPA_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_dti_conn
 */
#define IPA_CONNECT_DTI                (0x0)      /* Connect DTI2 to IP             */
#define IPA_DISCONNECT_DTI             (0x1)      /* Disconnect DTI2 from IP        */

/*
 * Value constants for VAL_link_id
 */
#define IPA_LINK_ID_DEFAULT            (0x0)      /* Default link id                */

/*
 * Value constants for VAL_dti_direction
 */
#define IPA_DTI_TO_HIGHER_LAYER        (0x0)      /* DTI2 used normally             */
#define IPA_DTI_TO_LOWER_LAYER         (0x1)      /* DTI2 is inverted               */

/*
 * Value constants for VAL_cmd
 */
#define IPA_CONFIG_UP                  (0x0)      /* enable the interface           */
#define IPA_CONFIG_DOWN                (0x1)      /* disable the interface          */

/*
 * Value constants for VAL_ack_flag
 */
#define IPA_CONFIG_ACK                 (0x0)      /* Acknowledged                   */
#define IPA_CONFIG_NAK                 (0x1)      /* not acknowledged               */

/*
 * Value constants for VAL_all_down
 */
#define IPA_ALLDOWN_FALSE              (0x0)      /* >= 1 Interface still up        */
#define IPA_ALLDOWN_TRUE               (0x1)      /* all interfaces down            */

/*
 * user defined constants
 */
#define IPA_ENTITY_NAME_LEN            (0x6)      

#include "CDG_LEAVE.h"


#endif