FreeCalypso > hg > fc-magnetite

view cdg211/cdginc/p_mac.val @ 624:012028896cfb

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_mac.val                                                      |
| SOURCE  : "__out__\g23m_dfile\prim\mac.pdf"                              |
| LastModified : "2003-02-26"                                              |
| IdAndVersion : "8441.111.03.009"                                         |
| SrcFileTime  : "Fri Jun 18 12:26:46 2004"                                |
| Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:15 2007                    |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_MAC_VAL
#define P_MAC_VAL


#define CDG_ENTER__P_MAC_VAL

#define CDG_ENTER__FILENAME _P_MAC_VAL
#define CDG_ENTER__P_MAC_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_MAC_VAL__LAST_MODIFIED _2003_02_26
#define CDG_ENTER__P_MAC_VAL__ID_AND_VERSION _8441_111_03_009

#define CDG_ENTER__P_MAC_VAL__SRC_FILE_TIME _Fri_Jun_18_12_26_46_2004

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_MAC_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_bcch_level
 */
#define MAC_RXLEV_MIN                  (0x0)      /* minimum receive signal level as defined in GSM 05.08 */
#define MAC_RXLEV_MAX                  (0x3f)     /* maximum receive signal level as defined in GSM 05.08 */
#define MAC_RXLEV_NONE                 (0x80)     /* no valid receive signal level present */

/*
 * Value constants for VAL_crc_error
 */
#define GRLC_CRC_PASS                  (0x0)      /* radio block is correctly received */
#define GRLC_CRC_FAIL                  (0x1)      /* radio block is not correctly received */

/*
 * user defined constants
 */
#define MAC_MAX_TIMESLOTS              (0x8)      
#define MAC_BURST_PER_BLOCK            (0x4)      
#define MAC_MAX_DL_DATA_BLCKS          (0x4)      

#include "CDG_LEAVE.h"


#endif