view cdg211/cdginc/p_rrlc.val @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_rrlc.val                                                     |
| SOURCE  : "__out__\g23m_dfile\prim\rrlc.pdf"                             |
| LastModified : "2002-10-11"                                              |
| IdAndVersion : "8443.101.02.008"                                         |
| SrcFileTime  : "Mon Nov 24 15:49:52 2003"                                |
| Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:16 2007                    |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_RRLC_VAL
#define P_RRLC_VAL


#define CDG_ENTER__P_RRLC_VAL

#define CDG_ENTER__FILENAME _P_RRLC_VAL
#define CDG_ENTER__P_RRLC_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_RRLC_VAL__LAST_MODIFIED _2002_10_11
#define CDG_ENTER__P_RRLC_VAL__ID_AND_VERSION _8443_101_02_008

#define CDG_ENTER__P_RRLC_VAL__SRC_FILE_TIME _Mon_Nov_24_15_49_52_2003

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_RRLC_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_cause
 */
#define LCS_OK                         (0x0)      /* no error                       */
#define LCS_WRONG_BTS                  (0xa)      /* Serving Cell BTS differs from Reference BTS */
#define LCS_HANDOVER                   (0x14)     /* handover occured during Position Measurement procedure */

/*
 * Value constants for VAL_sb_flag
 */
#define EOTD_INVALID                   (0x0)      /* invalid data                   */
#define EOTD_VALID                     (0x1)      /* valid data                     */

/*
 * Value constants for VAL_eotd_mode
 */
#define EOTD_IDLE                      (0x0)      /* Idle mode                      */
#define EOTD_DEDIC                     (0x1)      /* Dedicated or packet mode       */

/*
 * Value constants for VAL_exp_otd
 */

/*
 * Value constants for VAL_fn
 */
#define FNMAX                          (0x297000) /* max Frame Number + 1 (26*51*2048) */

/*
 * Value constants for VAL_mfrm_offset
 */

/*
 * Value constants for VAL_otd_type
 */
#define ROUGH_RTD                      (0x0)      /* only rough RTD has been provided by the NW */
#define EXPECTED_OTD                   (0x1)      /* only expectedOTD has been provided by the NW */
#define BOTH_OTD                       (0x2)      /* Both OTD / RTD types have been provided by the NW */

/*
 * Value constants for VAL_rough_rtd
 */

/*
 * Value constants for VAL_tav
 */
#define TA_NOT_AVAIL                   (0xff)     /* no Timing Advance in Idle Mode */

/*
 * Value constants for VAL_uncertainty
 */
#define UNC_MAX_2BIT                   (0x0)      /* uncertainty in bits. 0 - 2 bits */
#define UNC_MAX_4BIT                   (0x1)      /* uncertainty in bits. 3 - 4 bits */
#define UNC_MAX_8BIT                   (0x2)      /* uncertainty in bits. 5 - 8 bits */
#define UNC_MAX_12BIT                  (0x3)      /* uncertainty in bits. 9 - 12 bits */
#define UNC_MAX_16BIT                  (0x4)      /* uncertainty in bits. 13 - 16 bits */
#define UNC_MAX_22BIT                  (0x5)      /* uncertainty in bits. 17 - 22 bits */
#define UNC_MAX_30BIT                  (0x6)      /* uncertainty in bits. 23 - 30 bits */
#define UNC_GT_30BIT                   (0x7)      /* uncertainty in bits.  > 30 bits */

/*
 * user defined constants
 */
#define MAX_NCELL_EOTD_L1              (0xc)      
#define MAX_NCELL_EOTD                 (0xf)      
#define MAX_NCELL_EOTD_SI              (0x20)     
#define XCOR_NO                        (0x12)     

#include "CDG_LEAVE.h"


#endif