view src/aci2/aci/cmh_mmi.h @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_MMI
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the command handler
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_MMI_H
#define CMH_MMI_H

/*==== CONSTANTS ==================================================*/
 
 
/*==== TYPES ======================================================*/

#ifdef ACI /* for for ATI only version */
typedef enum
{
  AUDIO_IN  =  75, /* audio in   */
  AUDIO_OUT = 175, /* audio out  */
  KEY_BEEP  = 100, /* key beep   */
  DTMF_TONE = 100, /* dtmf tone  */
  RINGER    = 100  /* ringer     */
}
T_VOLUME_TYPE;

typedef enum
{
  SWITCH_AUDIO_NONE,
  SWITCH_AUDIO_OFF,
  SWITCH_AUDIO_ALERT,
  SWITCH_AUDIO_BUSY,
  SWITCH_AUDIO_CALLWAIT
}
T_ACI_IBT_ACT;

typedef struct
{
  T_ACI_CPI_IBT ati_currIbt;
  T_ACI_CPI_TCH ati_currTch;
  T_ACI_IBT_ACT last_action;
} T_IBT_TYPE;

#endif

/*==== PROTOTYPES =================================================*/
GLOBAL void cmhMMI_keyIndication ( void );
GLOBAL void cmhMMI_rxIndication  ( void );
GLOBAL void cmhMMI_btIndication  ( void );

#ifdef ACI
GLOBAL void cmhMMI_setAudioVolume (  BYTE          audioIn, 
                                     BYTE          audioOut );

GLOBAL void cmhMMI_handleAudioTone ( T_ACI_AT_CMD  cmdId,
																		 UBYTE         response,
                                     T_ACI_CPI_MSG msgType );


/*==== EXPORT =====================================================*/

#ifdef CMH_MMIS_C
GLOBAL T_IBT_TYPE ibt_params;
#else
EXTERN T_IBT_TYPE ibt_params;
#endif

#endif /* ACI */

#endif /* CMH_MMI_H */

/*==== EOF =======================================================*/