FreeCalypso > hg > fc-magnetite
view src/aci2/aci/hl_audio_drv.c @ 624:012028896cfb
FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out
The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2
stacked device", using a fake device ID code that would need to be patched
manually into cfgffs.c (suppressing and overriding autodetection) and using
an FFS base address in the nCS2 bank, indicating that this FFS config was
probably meant for the MCP version of Leonardo which allows for 16 MiB flash
with a second bank on nCS2.
We previously had this FFS config stanza conditionalized under
CONFIG_TARGET_LEONARDO because the base address contained therein is invalid
for other targets, but now that we actually have a Leonardo build target in
FC Magnetite, I realize that the better approach is to #if 0 out this stanza
altogether: it is already non-functional because it uses a fake device ID
code, thus it is does not add support for more Leonardo board variants,
instead it is just noise.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 22 Dec 2019 21:24:29 +0000 |
parents | 92dbfa906f66 |
children | 597869e59805 |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : AOC +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module defines the functions for the high level audio driver interface. +----------------------------------------------------------------------------- */ #ifndef HL_AUDIO_DRV_C #define HL_AUDIO_DRV_C #endif #include "aci_all.h" #include "aci_cmh.h" #include "aci.h" #include "psa.h" #include "hl_audio_drv.h" #include "rv/rv_general.h" #include "audio/audio_api.h" #include "fc-target.h" /* ===============GLOBAL VARIABLES====================*/ LOCAL T_HL_VOCODER_STATE currVocoderState; #ifdef CONFIG_TARGET_FCMODEM GLOBAL UBYTE aci_digital_voice_autoswitch; #endif /* This flag helps enable the vocoder interface testing for specific tescases */ #ifdef _SIMULATION_ BOOL vocoder_tst_flag; #endif /* =============FUNCTION DEFINITIONS FOR L1===========*/ #ifndef _SIMULATION_ #ifdef VOCODER_FUNC_INTERFACE void vocoder_mute_dl( BOOL mute ); void vocoder_mute_ul( BOOL mute ); void enable_tch_vocoder (BOOL vocoder_on); #endif /* VOCODER_FUNC_INTERFACE */ #endif /* _SIMULATION_ */ /*================= FUNCTIONS ========================*/ /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : HL_AUDIO_DRV | | ROUTINE : hl_audio_drv_init | +-------------------------------------------------------------------+ PURPOSE : This function is called to initialise the variables in the High Level Audio driver */ GLOBAL void hl_audio_drv_init (void) { TRACE_FUNCTION("hl_audio_drv_init()"); currVocoderState = HL_VOCODER_DISABLED; #ifdef _SIMULATION_ vocoder_tst_flag = FALSE; #endif } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : HL_AUDIO_DRV | | ROUTINE : hl_drv_enable_vocoder | +-------------------------------------------------------------------+ PURPOSE : This function is called to initialise the variables in the High Level Audio driver */ GLOBAL T_HL_VOICE_DRV_RSLT hl_drv_enable_vocoder ( void ) { #ifdef CONFIG_TARGET_FCMODEM T_AUDIO_VOICE_PATH_SETTING vpath = AUDIO_BLUETOOTH_HEADSET; T_AUDIO_FULL_ACCESS_WRITE audio_param; T_RV_RETURN return_path = { NULL, 0 }; #endif TRACE_FUNCTION("hl_drv_enable_vocoder()"); /* If the vocoder is already enabled, then ignore the request */ switch(currVocoderState) { case HL_VOCODER_ENABLED: TRACE_EVENT("*--Vocoder already active--*"); return HL_VOICE_DRV_SUCC; case HL_VOCODER_ENABLE_REQ: TRACE_EVENT("*--Vocoder cannot be enabled--*"); return HL_VOICE_DRV_FAIL; case HL_VOCODER_DISABLED: break; } #ifdef _SIMULATION_ if (vocoder_tst_flag) #endif { #ifndef VOCODER_FUNC_INTERFACE { PALLOC(mmi_tch_vocoder_cfg_req, MMI_TCH_VOCODER_CFG_REQ); mmi_tch_vocoder_cfg_req->vocoder_state = VOCODER_ENABLE; PSENDX(L1, mmi_tch_vocoder_cfg_req); } currVocoderState = HL_VOCODER_ENABLE_REQ; #else #ifndef _SIMULATION_ TRACE_EVENT("Function interface for Vocoder"); enable_tch_vocoder(TRUE); vocoder_mute_dl (FALSE); /* un-mute speaker */ vocoder_mute_ul (FALSE); /* un-mute microphone */ #ifdef CONFIG_TARGET_FCMODEM if (aci_digital_voice_autoswitch) { audio_param.variable_indentifier = AUDIO_PATH_USED; audio_param.data = &vpath; audio_full_access_write(&audio_param, return_path); } #endif currVocoderState = HL_VOCODER_ENABLED; #endif /* _SIMULATION_ */ #endif } return HL_VOICE_DRV_SUCC; } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : HL_AUDIO_DRV | | ROUTINE : hl_drv_disable_vocoder | +-------------------------------------------------------------------+ PURPOSE : This function is called to initialise the variables in the High Level Audio driver */ GLOBAL void hl_drv_disable_vocoder ( void ) { #ifdef CONFIG_TARGET_FCMODEM T_AUDIO_VOICE_PATH_SETTING vpath = AUDIO_GSM_VOICE_PATH; T_AUDIO_FULL_ACCESS_WRITE audio_param; T_RV_RETURN return_path = { NULL, 0 }; #endif TRACE_FUNCTION("hl_drv_disable_vocoder()"); currVocoderState = HL_VOCODER_DISABLED; #ifndef VOCODER_FUNC_INTERFACE /* Do nothing in this case */ #else #ifndef _SIMULATION_ TRACE_EVENT("Function interface for Vocoder"); vocoder_mute_dl (TRUE); /* mute speaker */ vocoder_mute_ul (TRUE); /* mute microphone */ enable_tch_vocoder (FALSE); /* disable vocoder */ #ifdef CONFIG_TARGET_FCMODEM if (aci_digital_voice_autoswitch) { audio_param.variable_indentifier = AUDIO_PATH_USED; audio_param.data = &vpath; audio_full_access_write(&audio_param, return_path); } #endif #endif #endif } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : HL_AUDIO_DRV | | ROUTINE : hl_drv_get_vocoder_state | +-------------------------------------------------------------------+ PURPOSE : This function returns the state of the vocoder */ GLOBAL T_HL_VOCODER_STATE hl_drv_get_vocoder_state (void) { return currVocoderState; } #ifndef VOCODER_FUNC_INTERFACE /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : HL_AUDIO_DRV | | ROUTINE : hl_drv_vocoder_enabled | +-------------------------------------------------------------------+ PURPOSE : Currently this function does nothing */ GLOBAL void hl_drv_vocoder_enabled (void) { TRACE_FUNCTION("hl_drv_vocoder_enabled()"); currVocoderState = HL_VOCODER_ENABLED; } #endif #ifdef _SIMULATION_ /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : HL_AUDIO_DRV | | ROUTINE : hl_audio_drv_initForTest | +-------------------------------------------------------------------+ PURPOSE : Initialise global variables related to simulaed */ GLOBAL void hl_audio_drv_initForTest(void) { vocoder_tst_flag = TRUE; } #endif