view src/aci2/aci/psa_ipas.c @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 93999a60b835
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_IPAS
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :
+-----------------------------------------------------------------------------
*/
#if defined (FF_WAP) || defined (FF_SAT_E)

#ifndef PSA_IPAS_C
#define PSA_IPAS_C
#endif

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "dti.h"      /* functionality of the dti library */

#include "aci.h"
#include "psa.h"
//#include "psa_l2r.h"
#include "psa_cc.h"
#include "aci_fd.h"
#include "cmh.h"
#include "dti_conn_mng.h"
//#include "cmh_l2r.h"

#include "wap_aci.h"
#include "psa_tcpip.h"

/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : PSA_IPA                      |
|                            ROUTINE : psaIPA_Config                |
+-------------------------------------------------------------------+

  PURPOSE : Configurate or disconfigurate IPA.

*/

GLOBAL void psaIPA_Config(ULONG ip, USHORT max_trans_unit, T_ACI_IPA_DIRC dirc
                      /*T_ACI_AT_CMD at_cmd */)
{
                  /* dirc = IPA_CONN if IPA is to be activated
                     dirc = IPA_DSC if IPA i to be deactivated */

  TRACE_FUNCTION("psaIPA_Config()") ;

  switch( dirc )
  {

  case ( IPA_CONN ):
    wap_state = IPA_Configuration;
    {
      PALLOC(ipa_config_req,IPA_CONFIG_REQ);
      ipa_config_req -> ip = ip;
      ipa_config_req->peer_ip = 0;
      ipa_config_req->cmd = IPA_CONFIG_UP;
      ipa_config_req -> mtu = max_trans_unit;

      PSENDX(IP,ipa_config_req);
    }
    break;

  case ( IPA_DSC ):
    wap_state = IPA_Deconfiguration;
    {
      PALLOC(ipa_config_req,IPA_CONFIG_REQ);
      ipa_config_req -> ip = 0;
      ipa_config_req->peer_ip = 0;
      ipa_config_req->cmd = IPA_CONFIG_DOWN;
      ipa_config_req -> mtu = 0;

      PSENDX(IP,ipa_config_req);
    }
    break;
  }
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : PSA_IPAS                     |
|                            ROUTINE : psaIPA_Dti_Req               |
+-------------------------------------------------------------------+

  PURPOSE : connect IP

*/

GLOBAL void psaIPA_Dti_Req(ULONG link_id, UBYTE peer_to_connect_to, UBYTE dti_conn)
{

  PALLOC( ipa_dti_req, IPA_DTI_REQ);

  TRACE_FUNCTION("psaIPA_Dti_Req");


  ipa_dti_req -> dti_conn  = dti_conn;
  ipa_dti_req -> link_id   = link_id;

  if (dti_conn EQ IPA_CONNECT_DTI)
  {
    switch( peer_to_connect_to )
    {
    case( DTI_ENTITY_UDP ):
      ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_HIGHER_LAYER;
      strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_UDP].name);
      break;
#ifdef GPRS
    case( DTI_ENTITY_SNDCP ):
      ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_LOWER_LAYER;
      strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_SNDCP].name);
      break;
#endif
    case( DTI_ENTITY_PPPC ):
      ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_LOWER_LAYER;
      strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_PPPC].name);
      break;
    default:
      TRACE_EVENT("unknown conn_peer_Id: IPA_DTI_REQ not sent");
      PFREE(ipa_dti_req);
      return;
    }
  }

  PSENDX( IP, ipa_dti_req );
}


#endif /* WAP || SAT E */