view src/condat2/com/include/sec_drv.h @ 624:012028896cfb

FFS dev.c, Leonardo target: Fujitsu MB84VF5F5F4J2 #if 0'ed out The FFS code we got from TI/Openmoko had a stanza for "Fujitsu MB84VF5F5F4J2 stacked device", using a fake device ID code that would need to be patched manually into cfgffs.c (suppressing and overriding autodetection) and using an FFS base address in the nCS2 bank, indicating that this FFS config was probably meant for the MCP version of Leonardo which allows for 16 MiB flash with a second bank on nCS2. We previously had this FFS config stanza conditionalized under CONFIG_TARGET_LEONARDO because the base address contained therein is invalid for other targets, but now that we actually have a Leonardo build target in FC Magnetite, I realize that the better approach is to #if 0 out this stanza altogether: it is already non-functional because it uses a fake device ID code, thus it is does not add support for more Leonardo board variants, instead it is just noise.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 22 Dec 2019 21:24:29 +0000
parents 93999a60b835
children
line wrap: on
line source

#ifndef _SEC_DRV_H_
#define _SEC_DRV_H_


/*******************************************
				Constants
*******************************************/
/*
 * Maximum size of category body
 */
#define SEC_DRV_CAT_MAX_SIZE	256	/* MUST be 8-aligned! */


/*
 * Defines for the first 6 lock-categories
 */
enum E_SEC_DRV_CAT_NUM
{
	SEC_DRV_CAT_NUM_NW = 0,
	SEC_DRV_CAT_NUM_NS,
	SEC_DRV_CAT_NUM_SP,
	SEC_DRV_CAT_NUM_CP,
	SEC_DRV_CAT_NUM_SIM,
	SEC_DRV_CAT_NUM_AP
};


/* 
 * Define of the different flags that may be
 * set in the MEPD configuration
 */
enum E_SEC_DRV_CONF_FLAG
{
  SEC_DRV_HDR_FLAG_Truncation		= 0x0004,
	SEC_DRV_HDR_FLAG_ETSI_Flag		= 0x0008,
	SEC_DRV_HDR_FLAG_Spec_Lock_Key	= 0x0010,
	SEC_DRV_HDR_FLAG_LAM_Unlock		= 0x0020,
	SEC_DRV_HDR_FLAG_No_SIM_Unlock	= 0x0040,
	SEC_DRV_HDR_FLAG_Airtel_Ind		= 0x0080,
	SEC_DRV_HDR_FLAG_Unlock_Timer	= 0x0100
};


/*
 * Status defines for the different
 * lock-categories
 */
enum E_SEC_DRV_CAT_STATUS
{
	SEC_DRV_CAT_STAT_Unlocked = 0,
	SEC_DRV_CAT_STAT_PermUnlocked,
	SEC_DRV_CAT_STAT_Locked
};


/*
 * Different flags for the lock-categories
 */
enum E_SEC_DRV_CAT_FLAG
{
	SEC_DRV_CAT_FLAG_LinkLocked = 0x01,	/* if the category is dependent on a parent.
										   Disable locking/unlocking on its own! */
	SEC_DRV_CAT_FLAG_UseSeed    = 0x02	/* Use seed to generate key during first boot */
};


/*******************************************
			Type definitions
*******************************************/
/*
 * Possible return values for the diff. functions.
 */
typedef enum
{
	SEC_DRV_RET_NotPresent	= -1,
	SEC_DRV_RET_Ok			= 0,
	SEC_DRV_RET_KeyMismatch	= 1,
	SEC_DRV_RET_KeyWrong	= 2,
	SEC_DRV_RET_FCExeeded	= 3,
	SEC_DRV_RET_Unknown		= 4
} T_SEC_DRV_RETURN;


/*
 * Lock types for sec_rec_Unlock
 */
typedef enum
{
	TEMPORARY_UNLOCK,
	PERMANENT_UNLOCK
} T_SEC_DRV_UNLOCK_TYPE;


/*
 * MEPD Configuration.
 * Only read-access to this structure is provided.
 *
 * This is a read only structure for the client (ACI layer)
 */
typedef struct
{
	UINT16	Flags;			/* See E_SEC_DRV_CONF_FLAG */
	UINT16  AddNewIMSI;		/* Handled by ACI Layer */
	UINT8	NumCategories;
	UINT8	FC_Max;			/* Failure Counter maximum */
	UINT8	FC_Current;		/* Current value of the Failure Counter */
	UINT8	FC_Key_Length;
	UINT8	FC_Reset_Fail_Max;
	UINT8	FC_Reset_Fail_Current;
	UINT8	FC_Reset_Success_Max;
	UINT8	FC_Reset_Success_Current;
	UINT8	MNC_Len;		/* Handled by ACI Layer */
	UINT8	GID1_Len;		/* Handled by ACI Layer */
	UINT8	GID2_Len;		/* Handled by ACI Layer */
	UINT8	TypeAprovalSIM;	/* Handled by ACI Layer */
	UINT8	TestCPHS;		/* Handled by ACI Layer */
} T_SEC_DRV_CONFIGURATION;


/*
 * Header part for a lock-category
 *
 * This is a read only structure for the client (ACI layer)
 */
typedef struct
{
	UINT8	Status;			/* see E_SEC_DRV_CAT_STATUS */
	UINT8	Flags;			/* see E_SEC_DRV_CAT_FLAG */
	UINT16	Dependency;
	UINT16	DataLen;
	UINT8	KeyLength;
} T_SEC_DRV_CAT_HDR;


/*
 * MEPD Category.
 */
typedef struct
{
	T_SEC_DRV_CAT_HDR	Header;
	void				*pBody; /* pointer to array of client data */
} T_SEC_DRV_CATEGORY;


/*******************************************
				Prototypes
*******************************************/
/* sec_get_imei...  missing! use cl_get_imei in comlib instead */
extern T_SEC_DRV_RETURN sec_get_CFG(T_SEC_DRV_CONFIGURATION **ppConfiguration);
extern T_SEC_DRV_RETURN sec_cmp_KEY(UINT8 rec_num, const char *pKey, UINT8 key_len);
extern T_SEC_DRV_RETURN sec_set_KEY(UINT8 rec_num, const char *pOldKey, const char *pNewKey, UINT8 key_len);
extern T_SEC_DRV_RETURN sec_set_FC_KEY(const char *pOldKey, const char *pNewKey);
extern T_SEC_DRV_RETURN sec_get_REC(UINT8 rec_num, T_SEC_DRV_CATEGORY **ppCategory);
extern T_SEC_DRV_RETURN sec_set_REC(UINT8 rec_num, const T_SEC_DRV_CATEGORY *pCategory);
extern T_SEC_DRV_RETURN sec_rec_Unlock(UINT8 rec_num, T_SEC_DRV_UNLOCK_TYPE unlockType, const char *pKey, UINT8 key_len, UINT16 dependMask);
extern T_SEC_DRV_RETURN sec_rec_Lock(UINT8 rec_num, const char *pKey, UINT8 key_len, UINT16 dependMask);
extern T_SEC_DRV_RETURN sec_FC_Reset(const char *pKey, UINT8 key_len);
extern T_SEC_DRV_RETURN sec_FC_Increment(void);

#endif //_SEC_DRV_H_